Cron jobs and daemons

Koha is supported by a number of background tasks. These tasks can either be periodically executed tasks (cron jobs) or continuously running tasks called daemons.

A cron job is a Linux command for scheduling a command or script on your server to complete repetitive tasks automatically. Scripts executed as a cron job are typically used to modify files or databases; however, they can perform other tasks that do not modify data on the server, like sending out email notifications.

A daemon is a Linux command that is typically started when the system is booted and runs in the background doing some function. The database used by Koha (either MySQL or MariaDB) is a daemon as is the web server (typically Apache).

Koha has many cron jobs in place that you can enable (search engine indexing, overdue notice generation, data cleanup and more), and a few daemons. This chapter will explain those for you.

Esempio di crontab

Un esempio di crontab di Koha si trova in misc/cronjobs/crontab.example

The example includes sample boilerplate cron job entries for the most commonly-used cron jobs.

Cron jobs

The locations below assume a development install which puts the crons in misc/, if you have a standard install you may want to look in bin/ for these files if you cannot find them in misc/

Copia di sicurezza

Daily backup

Script path: misc/cronjobs/

Does: creates a daily backup of the Koha database.

Frequenza consigliata: giornaliera


Holds queue

Script path: misc/cronjobs/holds/

Does: updates holds queue report

Required by: Holds queue report

Frequenza consigliata: ogni 1-4 ore


  • Si tratta di uno script che dovrebbe essere eseguito periodicamente, se la vostra biblioteca permette agli utenti di richiedere prenotazioni a scaffale. Questo script decide quale biblioteca deve incaricarsi di soddifare una data richiesta di prenotazione.

    It’s behavior is controlled by the system preferences StaticHoldsQueueWeight and RandomizeHoldsQueueWeight.

    Se non vuoi che le tue biblioteche partecipino al processo di assegnazione di prenotazioni, *devi* comunque elencare qui le biblioteche che vi prendono parte, con una lista di codici di biblioteca separate da virgola (es.: «MPL,CPL,SPL,BML» ecc. ).

    Per default, la coda delle prenotazioni funziona in modo che il sistema prima tenta di soddisfare una prenotazione utilizzando copie che sono già presso la biblioteca del ritiro. In mancanza, userà la lista di biblioteche definite in StaticHoldsQueueWeight. Se RandomizeHoldsQueueWeight non è attiva (come da default), lo script assegnerà le richieste in base alla preferenza di sistema StaticHoldsQueueWeight.

    Per esempio, se il tuo sistema ha tre biblioteche, di varia dimensione (piccola, media e grande) e vuoi che il processo di assegnazione prenotazioni usi prima la alla grande biblioteca e poi le piccole, potresti impostare la preferenza di sistema “StaticHoldsQueueWeight” a «LRG,MED,SML».

    Se vuoi che il carico delle prenotazioni venga suddiviso equamente tra le varie biblioteche del sistema, abilita la preferenza di sistema RandomizeHoldsQueueWeight. Quando è attiva, l’ordine delle biblioteche verrà rigenerato casualmente ogni volta che viene creata la loro lista.

    Lasciare vuota la preferenza di sistema StaticHoldsQueueWeight è controindicato. Se fosse, lo script build_holds_queue script ignorerà RandomizeHoldsQueueWeight e processerà le richieste di prenotazione per ordine alfabetico, non a caso.

Expired holds

Script path: misc/cronjobs/holds/

Does: cancels holds where the user has set an expiration date. If the library is using the ExpireReservesMaxPickUpDelay and ExpireReservesMaxPickUpDelayCharge preferences then this script will also cancel holds that have been sitting on the hold shelf for too long and will (if the library does) charge the patron for not picking up the hold.

It is possible to add a cancellation reason with the –reason parameter. Use the cancellation code from the HOLD_CANCELLATION authorized value category

Frequenza consigliata: giornaliera

Unsuspend holds

Script path: misc/cronjobs/holds/

Does: checks to find holds that should no longer be suspended and removes the suspension if the AutoResumeSuspendedHolds preference is set to “allow”. This puts the patron back in to the queue where they were when the hold was suspended.

Frequenza consigliata: giornaliera


Script: misc/cronjobs/

Does: calculates and charges (or increments) overdue fines per item to patron accounts. The fine calculation is done using the grace period, fine interval, fine amount and other parameters from the circulation and fines rules.

Richiesto dalla preferenza di sistema: finesMode

Frequenza consigliata: notturna

Note If the Koha system preference “finesMode” is set to “production”, the fines are charged to the patron accounts. If set to “test”, the fines are calculated but not applied.

Note Fines will not be applied on a holiday.

PARAMETERS - -h|–help

  • get help message

  • -l|–log

    • log the output to a file (optional if the -o parameter is given)

  • -o|–out

    • output directory for logs (defaults to env or /tmp if the directory does not exist)

  • -v|–verbose

    • verbose mode

  • -m|–maxdays

    • how many days back of overdues to process

    • this can improve performance by simply the number of records that need to be processed. It can be safe to limit the overdues processed to those under X days overdues given that circulation policy often caps fines at a maximum after a number of days.

Static fines

Script path: misc/cronjobs/

Does: charges a single static fine for any/all overdues a patron currently has outstanding. The charge amount is either defined on the command line per borrower category or will use the circulation rules associated with the oldest overdue item the patron has currently checked out (for the first fine period only) Once charged, the fine is static: No new fines will be added until the existing fine is paid off in full.

Frequenza consigliata: notturna

Note If the Koha system preference “finesMode” is set to “production”, the fines are charged to the patron accounts. If set to “test”, the fines are calculated but not applied.

Nota Le multe non verranno attribuite durante le feste.

Long overdues

Percorso dello script: misc/cronjobs/

Che cosa fa: permette di specificare i ritardi necessari per cambiare lo stato di “smarrito” di un elemento ad un valore differente. Opzionalmente addebita gli elementi smarriti, utilizzando il prezzo di sostituzione registrato nel record di ciascun elemento.

Frequenza consigliata: notturna


Staff can control some of the parameters for the longoverdue cron job with the DefaultLongOverdueLostValue and DefaultLongOverdueChargeValue preferences.

Track total checkouts

Script path: misc/cronjobs/

Che cosa fa: aggiorna il campo biblioitems.totalissues nel database con il il totale aggiornato dei prestiti basandosi sulle statistiche dello storico prestiti.

Frequenza consigliata: notturna


Se l’ora sul server del database non coincide con l’ora sul server di Koha, bisogna tenerne conto e probabilmente utilizzare l’opzione –since, invece dell’opzione –interval, per l’aggiornamento incrementale.


Questo cron job può essere usato in caso di problemi di performance. Altrimenti usare la preferenza di sistema UpdateTotalIssuesOnCirc.

Generate patron file for offline circulation

Script path: misc/cronjobs/

Does: generates the borrowers.db file for use with the Koha offline circulation tool

Frequenza consigliata: settimanale

Rinnovo automatico

Script path: misc/cronjobs/

Does: renews items if you’re allowing automatic renewal with your circulation and fines rules.

Frequenza consigliata: notturna


To run this properly, you must use the –confirm parameter, otherwise it will only run in test mode

PARAMETERS - -h|–help

  • get help message

  • –send-notices

    • sends the AUTO_RENEWALS notice to patrons if the automatic renewal has been done

  • -v|–verbose

    • verbose mode

  • -c|–confirm

    • without this parameter no changes will be made, the script will run in test mode

    • without this parameter, the script will default to verbose mode as well

Automatic checkin

Script path: misc/cronjobs/

Does: automatically checks in items after the loan period. This is set at the item type level.

Frequenza consigliata: notturna


Expire recalls

Script path: misc/cronjobs/recalls/

Does: automatically marks as expired recalls that

  • have been requested, but have not been fulfilled and are past their expiry date

  • recalls that have been awaiting pickup longer than the pickup period in the circulation rules or the period set in the RecallsMaxPickUpDelay system preference

Frequenza consigliata: notturna

Overdue recalls

Script path: misc/cronjobs/recalls/

Does: sets a recalled item as overdue if it hasn’t been returned by the adjusted due date

Frequenza consigliata: notturna


Batch delete patrons

Script path: misc/cronjobs/

Does: deletes patron records in batch based on date not borrowed since, expired before, last seen, category code, or library branch.


Dates should be in ISO format, e.g., 2013-07-19, and can be generated with date -d “-3 month” «+%Y-%m-%d».


The options to select the patron records to delete are cumulative. For example, supplying both –expired_before and –library specifies that patron records must meet both conditions to be selected for deletion.


  • –not_borrowed_since Delete patrons who have not borrowed since this date.

  • –expired_before Delete patrons with an account expired before this date.

  • –last_seen Delete patrons who have not been connected since this date. The system preference TrackLastPatronActivity must be enabled to use this option.

  • –category_code Delete patrons who have this category code.

  • –library Delete patrons in this library.

  • -c|–confirm This flag must be provided in order for the script to actually delete patron records. If it is not supplied, the script will only report on the patron records it would have deleted.

  • -v|–verbose Verbose mode.

Anonymize patron data

Script path: misc/cronjobs/

Does: removes borrowernumbers from circulation history so that the stats are kept, but the patron information is removed for privacy reasons.

Update patron categories

Script path: misc/cronjobs/

Does: Updates the patron category of patrons matching the given criteria to another specified patron category. This can be used to convert child patrons from a child patron category to an adult patron category when they reach the upper age limit defined in the patron category.

This script replaces the script.

Frequenza consigliata: notturna


This script is designed to update patrons from one category to another using the criteria specified using command line arguments.


  • –too_old Update, if patron is over the upper age limit of their current patron category.

  • –too_young Update, if patron is below the minimum age limit of their patron category.

  • –fo=X|–fineover=X Update, if the total fine amount on the patron account is over X.

  • –fu=X|–fineunder=X Update, if the total fine amount on the patron account is below X.

  • –rb=date|regbefore=date Update, if the registration date of the patron is before the given date.

  • –ra=date|regafter=date Update, if the registration date of the patron is after the given date.

  • -d –field name=value Update, if the given condition is met. <name> has to be replaced by a column name of the borrowers table. The condition is met, if the the content of the field equals <value>.

  • –where <conditions> Update, if the SQL <where> clause is met.

  • -v|–verbose Verbose mode: Without this flag only fatal errors are reported.

  • -c|–confirm Commits the changes to the database. No changes will be made unless this argument is added to the command.

  • -b|–branch <branchcode> Update, if the home branch of the patron matches the <branchcode> given.

  • -f|–form <categorycode> Update, if the patron currently has this patron category.

  • -t|–to <categorycode> Update the patrons matching the criteria to this patron category.



«» -b=<branchcode> -f=<categorycode> -t=<categorycode> -c» (Processes a single branch, and updates the patron categories from category to category)

«» -f=<categorycode> -t=<categorycode> -v» (Processes all branches, shows all messages, and reports the patrons who would be affected. Takes no action on the database)

Update patrons” messaging preferences

Script path: misc/maintenance/

Does: updates patrons” messaging preferences to the default values set in the patron categories.

Messaging preferences defaults are automatically set when adding a new patron or when importing patrons with the patron import tool. However, if you import patrons directly in the database, these messaging preferences will not be set.

There is no suggested frequency. This is a tool to be used when needed, although if you regularly import patrons directly in the database (through a third-party, for example), you can add it to your crontab.


If the EnhancedMessagingPreferences system preference is enabled after borrowers have been created in the DB, those borrowers won’t have messaging transport preferences default values as defined for their borrower category. So you would have to modify each borrower one by one if you would like to send them “Hold Filled” notice for example.

This script creates/overwrites messaging preferences for all borrowers and sets them to default values defined for the category they belong to (unless you use the options -not-expired or -no-overwrite to update a subset).


  • –doit

    Update the patrons. The script will not update patrons” messaging preferences without this option. It will only list the patrons who would have been updated.

  • –not-expired

    Only update patrons who are still active (whose files are not yet expired).

  • –no-overwrite

    Only update patrons without any messaging preferences. This option will skip patrons who have already set their preferences.

  • –category

    Only update patrons from the specified category.


    This option cannot be repeated.

    For example: --doit --category PT --category B

    will only update patrons from category B (the last category specified).

  • –since

    Only update patrons enrolled since the specified date.


    This option can use specific or relative dates.

    For example: --doit --since "2022-07-12"

    will only update patrons enrolled since July 12, 2022.

    And: --doit --since `date -d "1 day ago" '+%Y-%m-%d'

    will only update patrons enrolled since yesterday.


Updates all patrons to give them the default messaging preferences values from their respective category. --doit --not-expired

Updates all patrons whose memberships are not expired to give them the default messaging preferences values from their respective category. --doit --category PT

Updates all patrons in the PT category to give them the default messaging preferences for that category. --doit --no-overwrite --since "2022-03-01"

Updates patrons who do not have any messaging preferences set and who are enrolled since March 1st, 2022.


Message queue

Script path: misc/cronjobs/

Che cosa fa: elabora la coda dei messaggi, allo scopo di inviare agli utenti i messaggi e-mail o gli SMS di prestito, di rientro e di prenotazione. Richiede che la preferenza EnhancedMessagingPreferences sia attiva

Frequenza consigliata: 1-4 ore


Item due and Advanced due notices are controlled by the advance_notices cron.

Advanced notice

Script path: misc/cronjobs/

Che cosa fa: prepara gli avvisi «ante scadenza» e gli avvisi di scadenza per gli utenti che chiedono di essere avvisati della scadenza dei prestiti, o che vogliono di essere avvertiti dell’imminenza di tale termine. Richiede che EnhancedMessagingPreferences sia attiva

Frequenza consigliata: notturna


This script does not actually send the notices. It queues them in the message queue for later

Overdue notice

Script path: misc/cronjobs/

Che cosa fa:prepara gli avvisi per avvertire gli utenti (sia via mail, sia su carta) che il termine del prestito è scaduto.

Frequenza consigliata: notturna


This script does not actually send the notices. It queues them in the message queue for later or generates the HTML for later printing

Vedi anche

Il programma misc/cronjobs/ permette di inviare un messaggio agli utenti prima che il loro prestito scada, o di avvisarli che il prestito è appena scaduto.

Talking Tech

To learn more about setting up this third party product view the Talking Tech chapter.

Sending notices file

Script path: misc/cronjobs/thirdparty/

Does: generates Spec C outbound notifications file for Talking Tech i-tiva phone notification system.

Richiesto da: TalkingTechItivaPhoneNotification

Frequenza consigliata: notturna

Receiving notices file

Script path: misc/cronjobs/thirdparty/

Does: processes received results files for Talking Tech i-tiva phone notification system.

Richiesto da: TalkingTechItivaPhoneNotification

Frequenza consigliata: notturna

Notify patrons of expiration

Script path: misc/cronjobs/

Does: sends messages to warn patrons of their card expiration to the message queue cron.

Richiede: MembershipExpiryDaysNotice

Frequenza consigliata: notturna

In processing/book cart

Script path: misc/cronjobs/

Does: updates all items with a location of CART to the item’s permanent location.

Required by: NewItemsDefaultLocation, and UpdateItemLocationOnCheckin system preferences

Frequenza consigliata: oraria


Import webservice batch

Script path: misc/cronjobs/

Does: processes import bach queues of type “webservice”. Batches can also be processed through the UI.


Questo script si usa per OCLC Connexion

Connexion import daemon

Script path: misc/bin/

Does: listens for OCLC Connexion requests and is compliant with OCLC Gateway specification. It takes requests with MARC XML and import batch parameters from a configuration file and forwards it to svc/import_bib


Questo script si usa per OCLC Connexion

Batch item deletion

Script path: misc/cronjobs/

Does: generates a query against the items database and deletes the items matching the criteria specified in the command line arguments.


  • –verbose Send the «WHERE» clause generated by the collected C<–where> arguments, as well as items affected to Standard Out.

  • –where The C<–where> option may called multiple times. The following argument must be a syntactically valid SQL statement which is part of the C<WHERE> clause querying the items table. These are joined by C<AND>.

  • –commit No items will be deleted unless the C<–commit> flag is present.


The following are examples of this script: –where «items.withdrawn ! 0» –where «items.withdrawn_on < $(date –date=»13 month ago» –rfc-3339=date)» –commit –where «itemlost >= “1”» –where «itemlost <=”4”» –where «itemlost_on < “2014-04-28”» –commit

Check URL quick

Script path: misc/cronjobs/


This script replaces the deprecated script

Does: checks URLs from biblio records; scans all URLs found by default in 856$u of bibliographic records and displays if resources are available or not.


  • –host=http://default.tld Server host used when URL doesn’t have one, i.e. doesn’t begin with “http:”. For example, if –, then when 856$u contains “img/image.jpg”, the url checked is:

  • –tags Tags containing URLs in $u subfields. If not provided, 856 tag is checked. Multiple tags can be specified, for example: –tags 310 410 856

  • –verbose|v Outputs both successful and failed URLs.

  • –html Formats output in HTML. The result can be redirected to a file accessible by http. This way, it’s possible to link directly to the bibliographic record in edit mode. With this parameter –host-intranet is required.

  • –host-intranet=http://koha-pro.tld Server host used to link to bibliographic record editing page in Koha intranet interface.

  • –timeout=10 Timeout for fetching URLs. By default 10 seconds.

  • –maxconn=1000 Number of simultaneous HTTP requests. By default 200 connections.

Delete records via leader

Script path: misc/cronjobs/

Does: attempts to delete any MARC records where the leader character 5 equals “d”.


  • -c|–confirm Script will do nothing without this parameter

  • -v|–verbose Verbose mode

  • -t|–test Test mode, does not delete records. Test mode cannot determine if a record/item will be deleted successfully, it will only tell you what records and items the script will attempt to delete.

  • -i|–delete-items Try deleting items before deleting record. Records with items cannot be deleted.

Update authorities

Script path: misc/cronjobs/

Does: updates biblio data with changes to authorities records


Il nome di questo script è fuorviante: il programma non fonde inisieme le autorità; invece, fonde i dati delle autorità con i record bibliografici collegati. Le modifiche ai record di atuorità saranno applicate ai record bibliografici che usano quelle autorità nel momento in cui si esegue lo script.

Required by: AuthorityMergeLimit system preference

Frequenza consigliata: notturna

Serials update

Script: misc/cronjobs/

Che cosa fa: verifica se è presente un’uscita «in ritardo» sugli abbonamenti attivi; se c’è, la marca come ritardataria ed aggiunge la successiva come attesa.

Frequenza consigliata: notturna

Forza l’aggiornamento.

Script path: misc/cronjobs/

Fa: Aggiorna copie sulla base dell’elenco di regole prescritte nella Modifiche automatiche modifiche copie per età

Richiesto da: Modifiche automatiche copie per età

Frequenza consigliata: notturna


RSS feeds

Script: misc/cronjobs/rss/

Does: produces an RSS XML document for any SQL query (not used for search results RSS feed). Learn more.

Frequenza consigliata: oraria

Authorities browser

Script path: misc/cronjobs/

Does: generates content for authorities browse in OPAC

Richiesto da: preferenza di sistema OpacBrowser


Questa preferenza ed il realtivo cron job devono essere utilizzati solo su sistemi in Francese.

Subject/author clouds

Script: misc/cronjobs/

Does: generates HTML keywords clouds from Koha Zebra indexes. misc/cronjobs/cloud-sample.conf has a sample of how this script operates.

Frequenza: questo è il tipo di script che si può eseguire una volta al mese o giù di lì; il contenuto prodotto non cambia moltissimo con l’andar del tempo.

System administration

Services throttle

Script path: misc/cronjobs/

Esegue: reimposta i servizi basati su xISBN

Frequenza consigliata: notturna

Clean up database

Script path: misc/cronjobs/

Does: truncates the sessions table, cleans out old zebraqueue entries, action logs and staged MARC files.

See for the Koha database schema.

PARAMETERS - –del-exp-selfreg

  • –del-unv-selfreg DAYS

    • Delete all unverified self registrations in borrower_modifications older than DAYS.

  • –deleted-catalog DAYS

    • Purge bibliographic records deleted more than DAYS days ago from tables deletedbiblio, deletedbiblio_metadata, deletedbiblioitems and deleteditems.

  • –deleted-patrons DAYS

    • Purge patrons deleted more than DAYS days ago from the deletedborrowers table.

  • –fees DAYS

    • Purge entries in the accountlines table older than DAYS days, where the amountoutstanding is 0 or NULL.

    • In the case of –fees, DAYS must be greater than or equal to 1.

  • -h|–help

    • Get help message

  • –import DAYS

    • Purge entries from import tables older than DAYS days.

    • This includes import_batches, import_biblios, import_items, import_record_matches and import_records.

    • In import_batches, the batches that are the result of Z39.50 searches are removed with the –z3950 parameter.

    • Defaults to 60 days if no days specified.

  • --list-invites


    • Purge (unaccepted) list share invites from the virtualshelfshares table older than DAYS days

    • Defaults to 14 days if no days specified.

  • –logs DAYS

    • Purge entries from the action_logs table older than DAYS days.

    • Defaults to 180 days if no number of days specified.

  • –log-modules

  • –preserve-logs

  • -m|–mail DAYS

    • Purge entries from the message_queue table that are older than DAYS days.

    • Defaults to 30 days if no days specified.

  • –merged

    • Purge completed entries from the need_merge_authorities table.

  • –oauth-tokens

    • Delete expired OAuth2 tokens

  • –old-issues DAYS

    • Purge checkouts returned more than DAYS days ago from the old_issues table.

  • –old-reserves DAYS

    • Purge holds more than DAYS old from the old_reserves table.

  • –restrictions DAYS

    • Purge patrons restrictions from the borrower_debarments table expired since more than DAYS days.

    • Defaults to 30 days if no days specified.

  • –all-restrictions

    • Purge all expired patrons restrictions from the borrower_debarments table.

  • –searchhistory DAYS

    • Purge entries from the search_history table older than DAYS days.

    • Defaults to 30 days if no days specified

  • –sessions

    • Purge the sessions table.

    • If you use this while users are logged into Koha, they will have to reconnect.

  • –sessdays DAYS

    • Purge only sessions older than DAYS days.

  • –statistics DAYS

    • Purge entries from the statistics tables that are more than DAYS days old.

  • –temp-uploads

    • Delete temporary uploads from the uploaded_files table older than the number of days specified in the UploadPurgeTemporaryFilesDays system preference.

  • –temp-uploads-days DAYS

  • –transfers DAYS

    • Purge transfers completed more than DAYS days ago from the branchtransfers table.

  • –unique-holidays DAYS

    • Delete all unique holidays from the special_holidays table older than DAYS

  • –uploads-missing FLAG

    • Delete upload records for missing files when FLAG is true, count them otherwise

  • -v|–verbose

    • verbose mode

  • –zebraqueue DAYS

    • Purge completed zebraqueue entries older than DAYS days.

    • Defaults to 30 days if no days specified.

  • –z3950

    • Purge records from import tables that are the result of Z39.50 searches.

    • To purge all other import information, see the –import parameter above.

Share usage stats

Script path: misc/cronjobs/

Does: sends your info to the Hea website if you’re sharing information via the UsageStats feature

Frequenza: mensile


Cancella i suggerimenti più vecchi

Script path: misc/cronjobs/

Does: removes old suggestions from the suggestion management area.


  • help|?

    Show help message

  • days

    Define the age of suggestions to be deleted, based on “managed on” date


    The system preference PurgeSuggestionsOlderThan can also be used to define the number of days used in the script. If using the system preference, don’t use the “days” parameter.


    The number of days is based on the “managed on” date of the suggestion.

  • confirm

    This parameter is mandatory for the script to run.

Invia per email i suggerimenti da elaborare

Script path: misc/cronjobs/

Does: generates a notice to the fund owner that there are suggestions in need of processing

EDI message processing

Script path: misc/cronjobs/

Does: sends and received EDI messages

Frequenza: ogni 15 minuti

Remove temporary EDI files

Script path: misc/cronjobs/

Esegue: rimuove i file temporanei dell’EDI più vecchi di 5 giorni


Run report

Script path: misc/cronjobs/

Does: runs pre-existing saved reports


  • -v|–verbose Verbose output

  • –format=s Selects format. Choice of text, html, csv or tsv

  • -e|–email Whether or not to use e-mail (implied by –to or –from)

  • -a|–attachment Attach the report as a file. Cannot be used with html format

  • –username Username to pass to the SMTP server for authentication

  • –password Password to pass to the SMTP server for authentication

  • –method The type of authentication, i.e. LOGIN, DIGEST-MD5, etc.

  • –to=s E-mail address to send report to

  • –from=s E-mail address to send report from

  • –subject=s Subject for the e-mail

  • –store-results Store the result of the report

  • –csv-header Add column names as first line of csv output


  • reportID Report ID Number from, multiple ID’s may be specified

Social data

Ricevi i social data

Script path: misc/cronjobs/social_data/

Fa: scarica i dati da Babelthèque per aggiungerli ai record dell’Opac

Frequenza consigliata: notturna

Aggiorna i social data

Script path: misc/cronjobs/social_data/

Fa: aggiorna i records dell’Opac con i social data di Babelthèque


Daemons are continuously running tasks that help support Koha operation. Your database and web-server are run as daemons. Newer versions of Koha start two different daemons for most koha instances:

  • zebra - this is the index server

  • koha-indexer - this daemon updates the index server with new and modified data (biblios and authorities)

These daemons are started by the script /etc/init.d/koha-common.

Zebra indexer daemon

Script path: /usr/sbin/koha-indexer (invoked from /etc/init.d/koha-common)

The koha-indexer script invokes in daemon mode. In this mode, the script will run continuously and check the database for new or modified data every 30 seconds. New or modified records are then sent to Zebra for indexing, which only takes a second or so. The advantage of this approach is a search system which is much more responsive to changes, compared to the cron job approach.

Script di uso sconsigliato:

Questi non dovrebbero essere eseguiti senza modifiche:

Script path: misc/cronjobs/

Script: misc/cronjobs/

Script: misc/cronjobs/

Script: misc/cronjobs/

Script path:misc/cronjobs/