Catalogage

Before you start cataloging in Koha you’re going to want to do some basic setup. Refer to the Implementation checklist for a full list of these things. Most importantly you’re going to want to make sure that your MARC bibliographic frameworks are all defined the way you want. Once in the cataloging module you will not be able to add or remove fields and subfields so your frameworks must be ready before you start cataloging.

You can also use OCLC Connexion to send records directly in to Koha. For more information on that please review the OCLC Connexion Gateway setup Appendix.

• Get there: More > Cataloging

Bibliographic records

In Koha the bibliographic record contains the main information related to the material. This includes things like the title, author, ISBN, etc. This information is stored in Koha in Marc (different flavors of Marc are supported in Koha). Once this information is saved, item records can be attached.

Adding records

Les notices sont ajoutées à Koha par saisie originale ou par catalogage dérivé. Vous pouvez optez pour l’interface de catalogage de base, ou avancée, pour l’ensemble de votre travail

Si vous voulez cataloguer une nouvelle notice en utilisant l’éditeur de catalogage de base

• Click “New record”

  Note

  The “New record” button will open the default bibliographic framework. If you want to use a different framework, click the small arrow to the right of the “New record” button and choose the framework.

  

  Note

  You can create or modify frameworks in the Administration module.

Si vous voulez cataloguer une nouvelle notice en utilisant l’éditeur de catalogage avancée

• Enable the EnableAdvancedCatalogingEditor preference

• Click the “Advanced editor” button

  

If you want to catalog a record based on an existing record at another library in the basic or advanced editor

• Cliquer sur “Dériver une nouvelle notice via Z39.50”

• Click on the arrow to pre-select a framework for your imported your catalog record (the Default framework is used if you do not make a selection).

  

  • Cherchez la notice que vous voulez cataloguer

  Note

  Si aucun résultat n’est trouvé, ciblez votre recherche Z39.50 dans moins de champs et non sur tous.

• Search targets can be altered by using the Z39.50 admin area.

• The display of extra MARC fields and subfields can be configured via the AdditionalFieldsInZ3950ResultSearch preference.

• From the results” “Actions” button you can view the MARC or Card view for the record or choose to import it into Koha.

  

  Note

  • You can customize the columns of this table in the “Table settings” section of the Administration module (table id: resultst).

  • Si vous ne trouvez pas le titre que vous recherchez dans le résultat d’une requête Z.39.50, cliquez sur “Essayer une autre recherche” dans le coin inférieur gauche de la page

    

Basic editor cataloging

Quand vous ouvrez une grille vide ou que vous importez une notice via Z39.50, un formulaire s’affichera dans lequel vous pouvez poursuivre le catalogage

• If you would rather not see the MARC tag numbers you can change the value in your hide_marc system preference or each user can check the box next to “Show tags” found under “Settings”.

  

• Pour replier ou développer un champ, cliquez sur son numéro (ou sa description).

• To get help from the Library of Congress on a MARC tag click the question mark (?) to the right of each field number

  • It is possible to change the source of the MARC documentation using the MARCFieldDocURL system preference

  • Si vous considérez que cette information est inutile, vous pouvez désactiver cette option en cliquant sur “Montrer les liens vers la documentation MARC” en haut de la grille

• Sometimes fields may not be editable due to the value in your BiblioAddsAuthorities system preference. If you have this preference set to not allow catalogers to type in fields controlled by authorities you may see a lock symbol to the left of the field.

  

  • Si cette icône apparaît, vous devez cliquez dessus afin de lancer une recherche d’une autorité existante.

    

  • Dans la liste des résultats, cliquez sur Choisir autorité afin de la reporter dans votre notice bibliographique.

    

• Pour dupliquer un champ cliquez sur l’icône “répéter ce champ” à gauche

  

  • Pour positionner les sous-champs correctement, cliquez sur la flèche « vers le haut » à gauche du sous-champ

  • Pour dupliquer un sous-champ, cliquez sur l’icône de clonage à droite du champ.

    

  • Pour supprimer un sous-champ (s’il y en a plus d’un du même type, cliquez sur le signe moins qui se trouve à droit du champ.

• To use a plugin click on the icon to the right of the field

  

  • Certains champs fixes ont des éditeurs qui changeront selon le type de document que vous êtes en train de cataloguer (par exemple les champs 006 et 008)

    

• Une fois que vous avez fini, cliquez sur le bouton “Enregistrer” en haut et choisissez d’enregistrer ou de visualiser la notice bibliographique que vous venez de créer. Vous pouvez aussi continuer d’ajouter/modifier les exemplaires associés à la notice

  

  • Cliquer sur “Enregistrer et voir la notice” affichera directement la notice que vous venez de cataloguer

  • Cliquer sur “Enregistrer et ajouter des exemplaires” vous affichera le formulaire d’ajout/modification après l’enregistrement de la notice bibliographique à laquelle vous pouvez associer des exemplaires

  • Choosing “Save and continue editing” will allow you to save your work so far and keep you in the editor to continue working

• Si vous êtes sur le point d’ajouter une notice en doublon à votre catalogue, le système vous le signale.

  

  Note

  To find possible duplicates, the system searches for the ISBN, and if there is not ISBN, it searches for the same combination of title and author.

• If mandatory or important fields or subfields are not filled, the system will give a warning. Click “Go to field” to go to the problematic field and correct it.

  

  If you scrolled down and need to see the warning again, click the “Errors” button at the right of the toolbar.

  

  Note

  Important fields or subfields will not prevent from saving the record.

  Only mandatory fields or subfields will block saving.

Advanced editor cataloging

In order to use the Advanced cataloging editor you need to enable the EnableAdvancedCatalogingEditor preference.

Note

This feature does not currently include any support for UNIMARC or NORMARC fixed fields.

In the advanced editor once you’ve opened a blank framework or imported a record via Z39.50 you will be presented with the form to continue cataloging

Vous pouvez faire des recherches Z39.50 en utilisant la zone de recherche sur la gauche

De ces résultats Z39.50, vous pouvez voir la notice MARC en cliquant sur le lien qui est sur la droite.

Cliquer sur « Import » lance la notice dans l’éditeur pour y apporter des modifications

Note

Quand vous ajoutez un nouveau champs dans l’éditeur avancé, vous devez saisir un tiret-bas dans le cas d’un indicateur vide, et entourer les indicateurs d’espaces.

Note

Vous devez insérer un espace avant le premier délimiteur de sous-zone, mais pas avant ou après les autres délimiteurs de sous-zone dans le champs.

At the bottom of the editor you will see help from the Library of Congress for the field you are on. In cases where your MARC is invalid you will see red highlighting. To edit the record using only keyboard functions the Keyboard shortcuts button will inform you of the necessary commands.

A clipboard is available to copy and paste text between fields. See the image and table below for the shortcuts used with the clipboard.

Advanced cataloging keyboard shortcuts

Les raccourcis clavier suivants peuvent être utilisés dans le module de catalogage avancé pour gagner du temps et des clics.

Raccourci	Comportement
Ctrl-C	Copy current field
Shift-Ctrl-C	Copy current subfield
Ctrl+X	Delete current field and copy to “clipboard”
Shift-Ctrl-X	Delete current subfield and copy to “clipboard”
Alt-C	Insert copyright symbol (©)
Alt-P	Insert copyright symbol (℗) (sound recordings)
Ctrl+D	Insérer un séparateur
Ctrl-I	Copy current field on next line
Maj-Entrée	Insérer un saut de ligne
Shift-Ctrl-L	Link field to authorities
Entrer	Nouveau champ sur la ligne suivante
Onglet	Passez à la page suivante
Ctrl-P	Paste selection from “clipboard”
Maj-Tab	Retour à la position précédente
Ctrl+H	Obtenir de l’aide sur le sous-champ actuel
Shift-Ctrl-K	Toggle Keyboard
Ctrl+S	Save record (cannot be remapped)

Advanced cataloging virtual keyboard

A virtual keyboard is available for adding diacritics and symbols. Use the shortcut Shift-Ctrl-K to display the keyboard. A “Keyboard layouts” button will display at the top of the advanced editor that allows you to set the virtual keyboard layout for different languages.

Macros in advanced cataloging

Pour enregistrer une nouvelle macro :

• Select the « Macros… » button

• Une fenêtre apparaîtra. Dans cette fenêtre, sélectionnez « Nouvelle macro… », saisissez le nom de la nouvelle macro dans la boîte correspondante, puis cliquez sur OK.

• Maintenant, cliquez a la droite du petit chiffre 1, et saisissez votre première ligne de macro. Pour obtenir plusieurs lignes, par-exemple pour une macro multi-champs, saisissez la touche « Retour », et ainsi une ligne portant le chiffre 2 apparaîtra. Sur cette ligne, saisissez la deuxième ligne/le deuxième champs, etc.

• Vos macros seront automatiquement sauvegardées. Quand vous aurez terminé, cliquez sur le « x » pour fermer la fenêtre, ou sélectionnez une macro de la notice courante, ou sélectionnez une autre macro.

Pour modifier une macro existante:

• Select the « Macros… » button

• A window will pop up. In this window, select the macro that you wish to edit & make your changes.

• Vos travaux seront automatiquement sauvegardés, ainsi quand vous aurez terminé, cliquez sur le « x » pour fermer la fenêtre, ou sélectionnez une macro de la notice courante, ou sélectionnez un autre macro.

La syntaxe de base du langage macro :

• new 500=‡aÉdité avec Rancor

  • Créera une nouvelle zone 500 avec une sous-zone ‡a, et y inscrira « Édité avec Rancor »

• 245c= par J.K. Rowling

  • Inscrit au premier sous-champs ‡c du champs MARC 245 :  » par J.K. Rowling » , le créant si nécessaire.

• 082a={084a}

  • Assigne le contenu du sous-champs ‡a du premier code 082 (créant le sous-champs si nécessaire) au même contenu que la première sous-zone 084‡a.

• indicators=_1

  • Sets the indicators of the last mentioned tag (in this case, 082) to « _ » and « 1 ».

• new 090a=Z674.75.W67

  • Créez une nouvelle sous-zone ‡a dans le premier 090 (seulement si ce champs existe déjà) et inscrivez Z674.75.W67.

• new 090a at end=Z674.75.W67

  • Tel que précédemment

• new 245b after a= a tale of might and magic /

  • Crée un nouveau ‡b après le premier sous-champs ‡a et inscrit  » a tale of might and magic / ».

• delete 245b

  • Efface le contenu du premier sous-champs ‡b du premier 245

Importing records

It is possible to import both bibliographic and authority MARC record files in Koha. The files to import can be either in MARC or MARCXML format.

Importing records into Koha includes two steps.

1. The first is to stage records for import, which prepares the records, and imports them in the reservoir.

2. The second step is to import the prepared, or « staged », files from the reservoir into the catalog.

Staging records for import

• Get there: More > Cataloging > Import > Stage records for import

• First, find the MARC file on your computer

  

• Next, you will be presented with options for record matching and item

  imports

  

  • Pre-fill values with profile: if you already have staging profiles set up, you can choose the appropriate profile from the dropdown list

    • Profiles are used to pre-fill the rest of the staging settings form.

    • You can create a profile by choosing the various settings in the sections below and enter a profile name at the end of the form. Next time you stage records, the profile will be available.

  • Comments about this file: enter comments to identify your upload when going to the “Manage staged records” tool

  • Record type: choose which type of records are in this file, bibliographic or authority

    

  • Character encoding: choose the character encoding of your file

    

  • Format: choose the MARC format of your file

    

  • Modify record using a MARC modification template: choose if you would like to use a MARC modification template to alter the data you’re about to import

    

  • Choose whether or not you want to look for matching records

    

  • Record matching rule: choose which rules to use to check your catalog if these records already exist.

    

    Note

    You can set up record matching rules in the administration area

    Note

    When using the ISBN matching rule Koha will find only exact matches. If you find that the ISBN match is not working to your satisfaction you can change the AggressiveMatchOnISBN preference to “Do” and then run your import again.

    • Action if matching record found: choose what to do with matching records if they are found

      • Replace existing record with incoming record: choose this if you are importing more complete records than the ones you currently have, or if you made some changes using an external tool (MarcEdit for example)

      • Add incoming record: this will keep the existing record and add the incoming record, so you may end up with duplicates

      • Ignore incoming record (its items may still be processed): choose this if you do not want to replace existing records

    • Action if no match is found: choose what to do with records that are unique

      • Add incoming record: choose this if you wish to import records that are not already in your catalog (new titles for example)

      • Ignore incoming record: choose this if you don’t want to import records that are not already in your catalogue (for example, if you’re only replacing existing records and don’t want to add anything)

  • Check for embedded item record data?: choose whether or not to import the item data (field 952) found in the MARC records (if the file you’re loading is a bibliographic file)

    

    • Always add items: always add items regardless of matching status

    • Add items only if matching bib was found: this will only add items to existing records in your catalog

    • Add items only if no matching bib was found: this will only add items to the new records you’re importing, not the ones that already exist

    • Replace items if a matching bib was found: the match will look at the itemnumbers and barcodes to match on for items and will only replace existing items.

      Note

      Itemnumbers take precedence over barcodes

    • Ignore items: this will not add any items

  • Save profile: you can choose to save the chosen settings under a profile to use again later

    

• Click “Stage for import”

• The record staging will be treated as a background job. A progress bar will let you know how the job is progressing.

  

• Click “View detail of the enqueued job” to see the summary of the staging

• You will be presented with a confirmation of your MARC import

  

  • Number of records in file

  • Number of records with MARC errors

  • Number of records staged

  • Number of records matching existing records in the catalog

  • Number of items staged

• To complete the process, continue to the Manage staged records tool by clicking on the “View batch” link.

  • If these records are to be used in acquisitions, you can stop here and add these records to a basket by ordering from a staged file

Managing staged records

• Get there: More > Cataloging > Import > Manage staged records

Once you have staged your records for import you can complete the import using this tool.

• From the list of staged files, click on the file name that you want to finish importing

• Note that records that have already been imported will say so under “Status”

  Note

  If you’re coming directly from the Stage records for import tool you will not see this list of staged files, you will be taken automatically to the right file summary

• A summary of your staged file will appear along with the option to change your matching rules

  

• Below the summary is the option to import the batch of records using a specific framework

  

  • Choosing a framework other than “Default” isn’t necessary, but it’s helpful for running reports.

• Below the framework selection there will be a list of the records that will be imported

  

  • Review your summary before completing your import to make sure that your matching rule worked and that the records appear as you expect them to

  • Matches will appear with info under the “Match details” column

    

    and when clicking the “View” link under “Diff” you can see the difference between versions.

    

    For each match, you can choose to ignore the match by selecting the “Ignore matches” radio button. If more than one matching record was found, they will all be listed and you can choose with which to match your incoming record.

    

    If “Ignore matches” is selected, the action chosen in “Action if no match is found” from the staging step will be applied.

    Note

    Here are the different behaviors depending on the “Action if matching record found” choice from the staging step and if a match is selected or if “Ignore matches” is selected.

    Action if matching record found	Match selected	“Ignore matches” selected
    Replace existing record with incoming record	Incoming record replaces selected matching record	“Action if no match is found” is applied
    Add incoming record	Incoming record is added	Incoming record is added
    Ignore incoming record	Incoming record is ignored	“Action if no match is found” is applied

• Click “Import this batch into the catalog” to complete the import

• The record importation will be treated as a background job.

  

• You will be presented with a confirmation of your MARC import

  

  • Number of records added: new records added

  • Number of records updated: existing records replaced with the incoming ones

  • Number of records ignored: records that were ignored due to the matching rule

  • Number of items added: new items added

  • Number of items replaced: existing items updated with the incoming ones

  • Number of items ignored because of duplicate barcode: items that were ignored because the barcode already exists in the database

• Once your import is complete a link to the new records will appear to the right of each title that was imported

• You can undo your import by clicking the “Undo import into catalog” button

Records imported using this tool remain in the “reservoir” until they are cleaned either through the “Clean” button in the Staged MARC record management home page (see below) or through the cleanup_database cronjob. Reservoir records will appear when searching the catalog from the cataloging module

To manually clean items out of the “reservoir”:

• Visit the main screen of the manage staged MARC records tool

  

• To clean a batch, click the “Clean” button to the right

• You will be presented with a confirmation message

  

• Accept the deletion and the records will be removed from the reservoir and the status will be changed to “cleaned”

Adding analytic records

Certaines bibliothèques proposent aux usagers l’accès à des articles de journaux, de périodiques, des extraits de monographies, grâce au catalogage analytique. Le catalogage analytique crée des notices bibliographiques distinctes pour les articles, les chapitres, paragraphes, etc. inclus dans des volumes entiers comme un livre, journal, périodique. Dans le catalogage analytique, bien que la notice bibliographique soit créée séparément pour son titre, elle n’est pas physiquement séparée de son exemplaire de base. Pour en savoir plus sur le catalogage analytique, consultez le Chapitre 13 de AACR2.

If you would like to catalog analytic records there are two options. One is to use the Easy Analytics function; the other is the Analytics enhanced workflow.

Easy analytics

The easy analytics feature makes linking analytic records together easier. The first thing you need to do is set the EasyAnalyticalRecords preference to “Show” and the UseControlNumber preference to “Don’t use.”

After cataloging your analytic record (see adding records for more on creating records) click “Edit” from the normal view and choose to “Link to host item”

Il vous sera demandé d’entrer le code à barres de l’exemplaire lié à cette notice.

Après avoir scanné le code à barres de l’exemplaire et cliqué “Sélectionner” vous recevrez un message de confirmation.

La notice aura maintenant un champ 773 (en MARC21) rempli pour compléter le liens.

To view all of the items tied to the host record, do a search for the record, click the “Analytics” tab on the left and the analytics tied to each barcode will be shown under the “Used in” column.

Note

It is also possible to create analytic records from this screen by clicking on “Create analytics”

You can also see the analytics attached to this record by clicking the “Show analytic” link towards the top of the record in the normal view.

When looking at the analytic record you will also see a link to the host item under the “Host records” column in the holdings table when viewing the “Analytics” tab.

Analytics enhanced workflow

To use the enhanced workflow method of adding analytics, the first thing you need to do is set the EasyAnalyticalRecords preference to “Don’t show” and the UseControlNumber preference to “Use.”

After cataloging your original record (see adding records for more on creating records) click “New” from the normal view and choose to “New child record.”

This will open a new blank record for cataloging. The blank record will have the 773 field filled in properly to complete the link once the record is saved.

The “Show analytics” link from the host record will now use the hosts record control number (001) to search for all records on the system of the type “monographic component part” or “serial component part” (Leader position 7) with a 773 subfield w that contains the hosts record control number.

Editing analytics

If you have linked an analytic record incorrectly you can remove that link by editing the analytic record (not the host record).

To do this, go to the analytic record and click the “Edit” button. For UseControlNumber simply edit or remove the corresponding 773.

If using EasyAnalytics choose to “Edit items”; To the left of each item you will see two options.

• Clicking “Edit in host” will allow you to edit the item on the host record.

• Cliquer sur “Délier” supprimera la zone 773 (en MARC21) et le lien entre la notice de dépouillement et la notice hôte.

Editing records

To edit a record you can click the “Actions” button and choose “Edit biblio” from the search results on the cataloging search page

ou allez directement sur la notice bibliographique, cliquez sur le bouton “Modifier” et choisissez “Modifier la notice”

La notice s’ouvrira dans l’éditeur MARC

The alternative is to search via Z39.50 to overlay your record with a fuller record found at another library. You can do this by choosing “Replace record via Z39.50/SRU” from the “Edit” menu.

Once you choose that, you will be brought to a Z39.50 search window to search other libraries for the record in question.

Quand vous avez saisi les données utiles, cliquez “Sauvegarder”

Batch record modification

• Get there: More > Cataloging > Batch editing > Batch record modification

This tool is used to edit batches of bibliographic and authority records using MARC modification templates. Before visiting this tool you will need to set up at least one MARC modification template.

• Record type: choose whether you’re editing bibliographic or authority records

• Enter the biblionumbers or authids of records to be edited, in one of three ways

  • Upload a file of biblionumbers or authids

  • Use a list;

    

  • Or enter the numbers (one per line) in the box provided.

    

• MARC modification template: finally choose the MARC modification template to use to edit these records.

Once you’ve entered your criteria click “Continue”

You will be presented with the list of records that will be edited. Next to each one is a checkbox so you can uncheck any records you would rather not edit at this time.

Clicking “Preview MARC” will allow you to see what edits will be made when you finalize the edit.

Once you’re sure everything is the way you want you can click the “Modify selected records” button and your records will be modified.

MARC modification templates

• Get there: More > Cataloging > Batch editing > MARC modification templates

The MARC modification templates system gives Koha users the power to make alterations to MARC records automatically while staging MARC records for import or making batch record modifications.

This tool is useful for altering MARC records from various vendors or sources. The system essentially allows one to create a basic script using actions to copy, move, add, update and delete fields.

Click on “New template” (a template can be made up of one or more actions), enter a name and click “Submit”.

Optionally, you can copy an existing template by choosing the template to copy in the “Duplicate a template” drop-down menu.

Next, you can add actions to the template. Click on “New action”.

A “Add a new action” box will appear that you can use to specify what exactly you want to do.

For example if you’re loading in a batch of files from your EBook vendor you might want to add the biblio item type of EBOOK to 942$c.

• Choose “Add new”

• Enter the field 942 and subfield c

• Enter the value of “EBOOK” (or whatever your ebook item type code is)

• Provide a description so you can identify this action later

• Click “Add action”

Note

If you wish to update the values in an existing field choose the option “Update existing or add new”. This will update existing values where found and add a new field if one doesn’t exist.

Each action can also have an optional condition to check the value or existence of another field. For example you might want to add the call number to the item record if it’s not already there.

Note

Editing item fields only works when using the template when staging records. Once records are in Koha, the item is “separated” from the record and can only be edited using the batch item modification tool

• Choose “Copy”

• Decide if you want to copy the first occurrence or all occurrence of the field

• Enter the field 090 (or other bibliographic call number field) and subfield a to copy

• Enter the 952 field and o subfield to copy to

• Choose “if”

• Enter the 952 field and o subfield

• Choose « doesn’t exist »

• Provide a description so you can identify this action later

• Click “Add action”

The move, copy, and copy and replace actions support regular expressions, which can be used to automatically modify field values during the copy or move. An example would be to strip out the “$” character in field 020$c.

• Choose “Copy and replace”

• Decide if you want to copy the first occurrence or all occurrences of the field

• Enter the field 020 and subfield c to copy

• Enter the 020 field and c subfield to copy to

• Check the “RegEx” box and enter your regular expression (in this case s/\$// )

• Choose “if”

• Enter the 020 field and c subfield

• Choose « matches »

• Check the “RegEx” box and enter your regular expression (in this case m/^\$/ )

• Provide a description so you can identify this action later

• Click “Add action”

Note

The value for an update can include variables that change each time the template is used. Currently, the system supports two variables, __BRANCHCODE__ which is replaced with the branchcode of the library currently using the template, and __CURRENTDATE__ which is replaced with the current date in ISO format ( YYYY-MM-DD ).

You could also use regular expressions to add your library’s proxy URL in front of links in your MARC record.

• Choose “Copy and replace”

• Decide if you want to copy the first occurrence or all occurrences of the field

• Enter the field 856 and subfield u to copy

• Enter the 856 field and u subfield to copy to

• Check the “RegEx” box and enter your regular expression (in this case s/^/PROXY_URL/ )

• Provide a description so you can identify this action later

• Click “Add action”

When choosing between “Copy” and “Copy and replace” keep the following example in mind:

245 _aThe art of computer programming _cDonald E. Knuth.
300 _aA_exists _bB_exists

If we apply action (a) Copy the whole field 245 to 300, we get:

245 _aThe art of computer programming _cDonald E. Knuth.
300 _aA_exists _bB_exists
300 _aThe art of computer programming _cDonald E. Knuth.

If we apply action (b) Copy the subfield 245$a to 300$a, we get:

245 _aThe art of computer programming _cDonald E. Knuth.
300 _aThe art of computer programming _bB_exists

Once your actions are saved you can view them at the top of the screen. Actions can be moved around using the arrows to the left of them.

Actions will be done in the order they appear. Depending on your actions the order may be very important. For example you don’t want to delete a field before you copy it to another field. You can use the arrows to move actions up or down the list

• The up arrow will move the action up one position

• The up arrow with a line at the top will move the action to the first position

• The down arrow with a line at the bottom will move the action to the last position

• The down arrow will move the action down one position

Once your template is saved you will be able to pick it when using the Stage MARC records for import tool or when using the batch record modification tool.

Duplicating records

Sometimes a copy of the record you need to catalog can’t be found via Z39.50. In these cases you can create a duplicate of similar record and edit the necessary pieces to create a new record. To duplicate an existing record click “Edit as new (duplicate)” from the “Edit” menu on the bibliographic record.

This will open a new MARC record with the fields filled in with the values from the original bibliographic record.

Edit as needed and save.

Note

This will not change the original record.

Attaching files to records

Vous pouvez, si vous le souhaitez, ajouter des fichiers dans Koha avec peu de paramétrages.

• You will need to ask your system administrator to set the “upload_path” config variable to point to where the files will be stored

  • You can see if your upload path is set correctly by visiting About Koha > System information. If there is an error you will see it there.

    

• You will want to be sure that your OPACBaseURL system preference is set appropriately

• You will want to add the upload.pl plugin to the 856$u subfield in one (or multiple) of your frameworks

Once you are all set up you can continue with cataloging as regular. You will see a plugin icon next to the 856$u that will open up the upload and/or search window

From this menu you can click browse to find a file and attach it, or you can search files you have uploaded previously using the search box. From the search results you can choose which file to attach.

Une fois choisi, le fichier apparaît en tant que lien dans la notice MARC et dans l’affichage en détail.

Note

If the file is a PDF, it will be opened directly in the user’s browser whereas if the file is an image or another type of file, the user will be prompted to download it.

Adding cover images

Several free and paying services are integrated with Koha to provide cover images for your catalog, such as Amazon, Baker and Taylor, Google books, NovelList Select, Open Library, and Syndetics. Check the corresponding system preferences to enable the service of your choice.

There are other options such as a Coce image cache server, or having remote cover images with custom URLs.

Avertissement

If you enable more than one service, you will have multiple cover images in your records.

Most of these services use the ISBN of the record to fetch the cover image from the provider.

Finally, you can upload your own images to your records with what is called Local cover images in Koha.

Avertissement

Make sure you are respecting copyright when using images.

Adding a single local cover image

Before adding local cover images, make sure either the OPACLocalCoverImages system preference and/or the LocalCoverImages system preference is set to “Show”.

To upload local cover images staff need the upload_local_cover_images permission.

• In a bibliographic record, choose “Upload image” from the edit menu to add your cover image.

  

• Drag and drop the image to the area, or click on “Drop files here or click to select a file” a select the image file on your computer.

  

  Avertissement

  Koha does not have a maximum file size limit for this tool, but the web-server (such as Apache) may limit the maximum size of uploads (ask your system administrator).

• If the AllowMultipleCovers system preference is set to “Allow”, you will have the choice to replace existing covers or not. If the system preference is set to « Don’t allow », the image will replace existing cover images for this record.

  Note

  Where there are multiple images for a record they will display left to right (then top to bottom, depending on screen size) in the order they were uploaded. The image on the left (the first one uploaded) is used as a thumbnail cover in search results and on the details page. There is no way to reorder cover images uploaded in this way, so be sure to upload them in the order you’d like them to appear.

  

• Click “Process images”

Alternatively, you can access the cover image upload tool itself in Cataloging > Tools > Upload local cover image. You will then need to specify the biblionumber of the record for which you are uploading the image.

Note

The biblionumber or bibliographic record number is not the same as the barcode, it is the system-generated number assigned by Koha to each bibliographic record. You can find the biblionumber in various place, namely:

• At the end of the URL in the address bar of your browser when on the record details page. The URL will look something like

  ::

  https://your-koha-staff-interface/cgi-bin/koha/catalogue/detail.pl?biblionumber=XXXX

• In the MARC tab of the record details page in the staff interface

  

Adding a batch of cover images

The tool to upload cover images also allows batches of images to be uploaded in a ZIP file.

To upload a batch of images:

• Create a folder with the images to upload in it

• Create a text file (*.txt) named either datalink.txt or idlink.txt listing the biblionumber followed by the image name for each image, one per line. For example:

  ::

  506,2gentlemen.jpeg 779,asyoulikeit.jpg 138,selected-poems-oscar-wilde.jpg 41,sonnets.jpg 499,3rdhenry6.jpg 787,macbeth.jpg 102,sonnets2.jpg

  

  Avertissement

  Make sure there are no extra lines or characters in the text file.

• Create a ZIP file that includes all the images to upload and the text file

• In Koha’s staff interface, go to the upload cover image tool in Cataloging > Tools > Upload local cover image, and drag and drop or select the ZIP file from your computer

• The file type “ZIP file” should be selected

• If the AllowMultipleCovers system preference is set to “Allow”, you will have the choice to replace existing covers or not. If the system preference is set to « Don’t allow », the image will replace existing cover images for this record.

• Click “Process images”

• You are presented with a summary of the upload

  

Note

The source image is used to generate a 140 x 200 px thumbnail image and a 600 x 800 px full-size image. The original sized image uploaded is not kept by Koha.

In the staff interface, the cover images appear in the search results, in the record details page on the right of the title, and in the “Images” tab in the holdings table at the bottom.

In the OPAC, the cover images appear in the search results, in the record details page on the left of the title, and in the “Images” tab in the holdings table at the bottom.

Deleting a local cover image

To remove a cover image, you need the upload_local_cover_images permission.

• Click “Delete image” below the image in the “Images” tab in the staff interface.

  

Merging records

To merge bibliographic records together,

• Perform a search in the catalog to find the records that need to be merged.

• Check the boxes next to the duplicates to select them.

  

• Click « Edit » and choose the « Merge records » option

  

Note

Alternatively, you can go through the cataloging module to merge bibliographic records.

After searching for the records in the cataloging search and selecting the records to be merged, click the “Merge selected” button at the top of the list.

• Choose which record to keep as the primary record, the other records will be deleted after the merge

  

• Choose which framework to use for the newly merged record

You will be presented with the MARC for all of the records, each accessible by a tab labeled with the biblionumber for this record. By default the entire first record will be selected.

• Uncheck the fields you don’t want in the final (destination) record from each source records

• Check the fields you want to add in the final (destination) record

Note

Should you try to add a field that is not repeatable two times (like choosing the 245 field from both records) you will be presented with an error

Note

If mandatory fields are missing in the destination record, Koha will not merge the records. You must select a value for mandatory fields.

If important fields are missing in the destination record, Koha will warn you, but will still merge the records.

Sous les notices que vous êtes en train de fusionner, vous verrez la ligne « Zones à afficher dans le rapport ». Celle-ci vous permet de choisir quels champs MARC vous verrez apparaître sur la page de confirmation de fusion.

• Si vous ne saisissez rien dans cette zone, vous recevrez une confirmation avec des nombres seulement

  

• If you enter fields you will see those on the confirmation page.

  

  Note

  You can set defaults for this report with the MergeReportFields system preference.

• Once you have completed your selections click the “merge” button.

The primary record will now contain the data you chose for it, as well as all of the items and acquisition information from both bibliographic records, and the second record will be deleted.

Merging bibliographic records with lists

Another way to merge together duplicate bibliographic records is to add them to a list and use the merge tool from there.

|listofdups|

• Add duplicate records to a list

• Go to Lists and click on the list title to view the list

• Select the records to be merged

• Click the “Merge selected” button at the top of the list

Once you have selected the records to merge together the process is the same as merging via cataloging.

Deleting records

To delete a bibliographic record, click the “Edit” button and choose “Delete record”.

Bibliographic records can only be deleted once all items have been deleted. If you try to delete a bibliographic record with items still attached you will see that the delete option is grayed out. (See the Deleting items section of this manual to learn how to delete items.)

Batch deleting records

• Get there: More > Cataloging > Batch editing > Batch record deletion

This tool will take a batch of record numbers for either bibliographic records or authority records and delete all those records and any items attached to them in a batch.

First, you need to tell the tool if you’re deleting bibliographic or authority records.

Next, you can:

• load a file with biblionumbers or authids;

  

• use a list;

  

• or enter the list of numbers in the box provided.

  

Once you submit the form you will be presented with a summary of the records you are trying to delete.

If a record you want to delete can’t be deleted, it will be highlighted.

Check the records you want to delete and click the “Delete selected records” button to finish the process.

You can also use the links at the top of the table to select only the records without items, holds, or subscriptions.

Item records

Chaque notice bibliographique Koha peut avoir un ou plusieurs exemplaires rattachés. Chaque exemplaire contient des informations de la copie physique que possède la bibliothèque.

Adding items

After saving a new bibliographic record, you will be redirected to a blank item record so that you can attach an item to the bibliographic record. You can also click “Add/Edit items” from the cataloging search results

or you can add new item at any time by clicking “New” on the bibliographic record and choosing “New item”

Le formulaire de modification de l’exemplaire va s’afficher:

If you already have item templates, you can choose the template to apply and click “Apply template”. This will pre-fill the item form with the template values.

Au strict minimum, si vous prévoyez de faire des prêts, les champs suivants devraient être entrés pour les exemplaires :

• 2 - Source of classification or shelving scheme

• a - Home library

• b - Current library

• o - Full call number

  • If you’d like you can use the cataloguing plugin “call number browser” (cn_browser.pl) for this field. If it’s enabled you’ll see a … to the right of the field. When clicked that will open a call number browser window if the row is highlighted in Red then the call number is in use, if there is a thin Green line instead then the call number can be used.

    

• p - Barcode

• v - Cost, replacement price

  • Lorsqu’un document a été déclaré comme étant “Perdu”, le prix de remplacement du document sera facturé aux adhérents

• 952$y - Koha item type

To make sure that these values are filled in you can mark them as mandatory in the framework you’re using and then they will appear in red with a “required” label. The item will not save until the required fields are filled in.

Note

To make item subfields required in a framework, edit the 952 field in the framework editor.

You can add a new authorized value directly from the add and edit item screen for any fields that are linked to authorized value categories such as Shelving location (subfield$c) or Collection code (subfield$8).

• Start to type the authorized value description, if a match is not found you will see the option “(Select to create)”.

• Click on this option to display a pop-up window where you can create you new authorized value.

• The authorized value category will be pre-populated from the field you are using, for example LOC for Shelving location, CCODE for Collection code. Take care when choosing your authorized value code. Refer to the notes on adding new authorized values for the correct format of these codes. Use the Description field for the actual value that will be displayed

• You can add authorized values in the same way from bibliographic and authority records.

Note

You must have the manage_auth_values administration permission to add authorized values from cataloguing.

Below the add form there are 3 buttons for adding the item.

• “Add item” will add just the one item

• “Add & duplicate” will add the item and fill in a new form with the same values for you to alter

• “Add multiple copies of this item” will ask how many copies and will then add that number of items adding +1 to the barcode so each barcode is unique

  

• “Save as template” will save this item as an item template to reuse later.

  Avertissement

  Saving as template will not save the item. It will only create the template.

Les exemplaires ajoutés apparaîtront au-dessus du formulaire d’ajout

Note

You can customize the columns of this table in the “Table settings” section of the Administration module (table id: Items Editor).

Vos exemplaires seront également affichés sous la notice bibliographique sur la page d’affichage détaillé.

If the SpineLabelShowPrintOnBibDetails system preference is set to “Show”, there will be a button to print a quick spine label next to each item.

Vous pouvez aussi filtrer le contenu du tableau en cliquant sur le lien “Activer les filtres”. Il affichera alors une rangée en haut où vous pourrez filtrer les résultats dans la colonne que vous souhaitez.

Adding and using item templates

You can create item templates to share and reuse in order to easily fill out the new item form.

Note

Anyone who has the edit_items permission can create and share item templates, and delete their own templates.

However, the manage_item_editor_templates (or superlibrarian) permission is needed to manage item templates created by others.

Creating a new item template

To create an item template,

• Go to add a new item

• Fill out the item form with the values you want to add to the template

• Instead of saving the item, click the “Save as template” button

  

• Choose “Save as new template”

• Enter a template name

• Choose if you want this template to be shared with all other catalogers

• Click “Save”

Updating an existing template

To edit an existing template,

• Go to add a new item

• Choose the template to update at the top of the form

  

• Click “Apply template”

• Change the values as needed

• Click the “Save as template” button.

  

• Choose the template to update

• Choose if you want this template to be shared with all other catalogers

• Click “Save”

Using a template

To use a template,

• Go to add a new item

• Choose the template to update at the top of the form

  

• Click “Apply template”

• If checking “For session”, all new items will be based on this template, unless otherwise specified

• Change the values as needed

• Save the item

Deleting a template

To delete a template,

• Go to add a new item

• Choose the template to delete at the top of the form

  

• Click “Delete template”

Editing items

Les exemplaires peuvent être modifiés de plusieurs façons.

• Clicking “Edit” and “Edit items” from the bibliographic record

  

  Ceci ouvrira une liste d’exemplaires, où vous pourrez cliquer sur le bouton “Action” a la gauche de l’exemplaire spécifique que vous voulez éditer, et choisissez “Éditer”

  

• Clicking “Edit items” beside the item on the “Items” tab

  

  Ce qui ouvrira un tableau de l’exemplaire que vous pouvez modifier

  

• En cliquant sur sur le bouton “Modifier” puis “Modifier les exemplaires par lot”

  

  This will open up the batch item modification tool where you can edit all of the items on this record as a batch.

• You can also enable StaffDetailItemSelection to have checkboxes appear to the left of each item on the detail display. You can then check off the items you would like to edit and click “Modify selected items” at the top of the list.

  

• You can click “Edit” to the right of each item in the Holdings tab

  

• There is also a link to Edit items from the search results in the staff client

  

• Finally you can use the batch item modification tool

Quick item status updates

Souvent, le personnel qui gère la circulation a besoin de modifier l’état d’un exemplaire pour le déclarer Perdu ou Endommagé. Il n’y a pas besoin pour cela de modifier toutes les informations concernant l’exemplaire : un affichage synthétique est accessible en cliquant sur le code à barres de l’exemplaire dans la page d’affichage des retours ou dans l’historique des prêts. Vous pouvez aussi y accéder en cliquant sur l’onglet Exemplaire à gauche de la page affichant la notice bibliographique.

From this view you can mark an item lost by choosing a lost status from the pull down and clicking the “Set status” button.

You can also mark an item as damaged by choosing a damaged status from the pull down and clicking the “Set status” button.

Duplicating items

You can easily duplicate each item by clicking the “Actions” button the left of each item on the edit items screen

De là vous pouvez choisir “”Dupliquer”” l’exemplaire, et ceci rempliera le formulaire avec les valeurs de l’exemplaire que vous avez choisi.

Batch editing items

• Get there: More > Cataloging > Batch editing > Batch item modification

This tool will allow you to modify a batch of item records in Koha.

From the tool, choose to either upload a file of barcodes or itemnumbers, or scan item barcodes one by one into the box below the upload tool. You can also decide the items edited should be populated with the default values defined in the default framework.

Once the file is uploaded or the barcodes listed, click “Continue.”

You will be presented with a summary of the items you want to modify. From here, you can uncheck the items you don’t want to modify before making changes in the form below. You can also hide columns you don’t need to see to prevent having to scroll from left to right to see the entire item table. The holds column displays a count of the current holds for the item.

Note

To uncheck all items that are currently checked out you can click the “Clear on loan” link at the top of the form.

Using the edit form, choose which fields to make edits to. By checking the checkbox to the right of each field you can clear the values in that field for the items you are modifying.

You can also click the “RegEx” link to change the text field to a regular expression substitution. This is used to change only a part of a text string.

Once the changes are made, the job will be enqueued in the background jobs.

To see the edited items, click on “View detail of the enqueued job”.

Batch editing items from the bibliographic record

You can also edit items on one bibliographic record in a batch by going to the bibliographic record and clicking Edit > Edit items in batch

This will bring you to the same batch item modification tool as above.

Batch editing items from a report

The batch item modification tool is also available from reports results when the results contain itemnumbers.

When the report contains the itemnumber, the option “Batch operations with X visible records” will automatically appear. This option contains batch item modification ans batch item deletion.

By default, only 20 results are shown when running reports, therefore, the batch modification will only be done on 20 results. If you have more results that you want to edit in a batch, make sure to change the number of results per page before choosing the batch operation.

Automatic item editing by age

• Get there: More > Cataloging > Automation > Automatic item modifications by age

This tool allows you to update item specific fields when an item reaches a certain age.

Note

Staff need the items_batchmod permission to access this tool.

Note

The settings in this tool will be acted upon by the corresponding cron job.

If you haven’t created any rules, you will see the option to “Add rules” on the page. Click this button to create rules.

If you have rules already there will be a button that reads “Edit rules”. To create a new rule click the “Edit rules” button at the top of the page.

You will be brought to a page where you can edit existing rules or create a new rule.

Click “Add rule”.

Fill out the form that appears to set the new rule:

• Age in days: the age in days at which the item will update

• Age field: the field on which the age is based

  • items.dateaccessioned (default): date of acquisition of the item; in MARC21, it is normally mapped to 952$d

  • items.replacementpricedate: date the replacement price is effective from; in MARC21, it is normally mapped to 952$w

  • items.datelastborrowed: date the item was last checked out; in MARC21, it is normally mapped to 952$s (not editable manually)

  • items.datelastseen: date of the last transaction made on the item; in MARC21, it is normally mapped to 952$r (not editable manually)

  • items.damaged_on: date on which the damaged status was set (not editable manually)

  • items.lost_on: date on which the lost status was set (not editable manually)

  • items.withdrawn_on: date on which the withdrawn status was set (not editable manually)

• Conditions: what criteria is needed to trigger the update

  • Choose the field to check from the dropdown menu

  • Enter the value the field should have to trigger the update

  • If you need more than one condition, click “Add a condition”

• Substitutions: what changes are made when the script runs

  • Choose the field to change from the dropdown menu

  • Enter the value the field should have after the update

  • If you need to do more than one change, click “Add a substitution”

Once you’re done, click the “Save” button to save the rule and go back to the main page, or click “Add rule” again to add another rule.

Rotating items through libraries automatically

• Get there: More > Cataloging > Automation > Stock rotation

Note

This tool will only be available if the StockRotation system preference is enabled.

Note

To access this automation tool, staff needs the following permissions:

• manage_rotas: this grants the ability to create, update and delete rotas

• manage_rota_items: this grants the ability to add, remove and progress items on a rota.

Stock rotation helps to spread resources more fairly among library branches and allows patrons to see a wider range of titles.

Items are popular whilst they are new at a particular branch. However, their use often tails off over time. This tool empowers librarians to automate the movement of items on to another branch before usage declines and thereby extends the items useful life.

Library staff create rotation plans (rotas) and then assign them to items. A cronjob is then used to cycle these items round the specified libraries on the rotation plan, moving them to the next stage after the prescribed period of time has passed at the current stage.

Note

This tool requires the stockrotation.pl cron job that must be configured to run on a daily basis.

Email notices may be used to provide the library branches with a list of items to be put in transit to the next branch and if an item is found to be on loan at the time that it should be transferred, an alert will be displayed when it is next returned.

Note

The notice used is SR_SLIP. It can be customized with the Notices and slips tool.

From the stock rotation tool page you can add new rotation plans (rotas) and see a summary of your currently configured rotation plans. You can then edit plan details, activate and deactivate plans and manage stages and items on a given rotation plan.

Note

You can customize the columns of this table in the “Table settings” section of the Administration module (table id: stock_rotation).

Creating a new rota

To create a new rota (rotation plan), click the “New rota” button on the main stock rotation page.

• Name: enter a name or code to identify the rota

• Cyclical:

  • No: items will remain at the last library on the rotation plan upon reaching the end of the rota

  • Yes: items will continue to rotate, returning back to the first library on the rotation plan once they have completed their allotted time at the last library, indefinitely until manually removed from the rota

• Description: optionally add an expanded description of the rota for display in summary views

Once the rota is complete with stages and items, you can activate the rota to begin cycling the items through the rotation.

From the stock rotation tool main page, click on “Activate” next to the rota.

Adding stages to a rota

Once the rota is created, you can add stages to it. Stages are a length of time that an item will stay at a particular library before moving on.

From the stock rotation summary page, click the “Manage” button and choose the “Stages” option.

Click the “Add stage” button.

• Library: choose the library this stage is for

• Duration: enter the number of days the item should stay at this library before moving on

Click “Save”.

Once all the stages have been added, you can move them around using the handles on the left to change the order.

Adding items to a rota

Once a rota has stages, items can be added to it.

From the stock rotation summary page, click the “Manage” button and choose the “Items” option.

Click the “Add items” button.

Items can be added to a rota individually (by barcode) or in bulk (via the upload of a line delimited barcode file).

Items can also be added to a rota through the staff interface catalog, in the “Rota” tab on the left when viewing a detailed record.

Choose the rota to add the item to and click “Add to rota”.

Items can also be automatically added to rotas at acquisition time by using the LRP (Library Rotation Plan) field in EDI.

On the Manage > Items page, there will be a summary of all items on the rota with their current location. You have the options to immediately progress items, mark items as “in demand” and remove an item from rotation.

Note

You can customize the columns of this table in the “Table settings” section of the Administration module (table id: stock_rotation_manage_items).

• Move to next stage: progress the item directly to the next stage even if the duration at the current stage is not complete.

• Add « In demand »: double the duration the item will stay at it’s current stage compared to what is set in the rota. This is often used for items that are found to be unexpectedly popular at a particular library.

• Remove from rota: remove the item from the rota.

Individual items can also be managed from the staff interface catalog, in the “Rota” tab.

Grouping items

You can group items in order to place holds on a subset of items on a bibliographic record, rather than a specific item or the next available item. For example, if you have a bibliographic record for a series, and several items of each volume, you can group items by volumes and then place holds on the next available item of « Vol. 4 ».

Note

Staff users need the manage_item_groups permission

You need to first enable the item groups feature with the EnableItemGroups system preference.

Once the system preference is enabled, a new “Item groups” tab will appear in the detailed record in the staff interface.

• Click on the “New item group” button

• In the form that appears,

  

  • Name: enter a name for the group, this name will visible in the staff interface and the OPAC

  • Display order: enter a number for the position this group should be displayed compared to the other groups of the same record (for example, if you have groups with 0, 1 and 2 as display order, the 0 group will be displayed first, the 1 group will be displayed second and the 2 group will be displayed third. You can put any number in there, your groups can be 3, 11 and 27, in that case, 3 will be displayed first, then 11 and finally 27)

• Click “Submit” to create the group

Once it is created, you can add items to the group.

• In the “Holdings” tab, check the items that should be added to the group

• At the top of the table, there will be batch actions, click on “Add/move to item group”

• Choose which group the selected items should be added to

  

• Click “Set item group”

The item group in which each item is will be shown in the “Holding” table.

To delete an item group, go to the “Item groups” tab, and click the “Delete” button. This will only delete the group, the items will remain, but ungrouped.

Item information

A gauche de chaque notice bibliographique se trouve l’onglet Exemplaires pour visualiser les informations de l’exemplaire.

Clicking that tab will give you basic information about the items. From here you can see basic information about the item such as the home library, item type, collection code, call number and replacement price. If the item is on loan, the loan details are displayed and you can click ‘View’ to see the details of any renewals.

You can also view and edit the status information. If an item is marked lost or withdrawn, you will see the date that status was applied.

In the “History” section you will see information about the check out history of the item and if you ordered the item via the acquisitions module then this section will include information about the order.

Si vous cliquez sur la date de commande ou la date d’entrée dans les collections, cela vous redirigera sur les informations d’acquisition de l’exemplaire.

Adding cover images for items

If you have either OPACLocalCoverImages or LocalCoverImages set to “Show”, you can upload cover images for individual item records from the “Upload image” option from the Edit button on the right of the Holdings table.

Click Choose file to find the image file on your computer and then Upload file.

On the next screen you are given the option to replace existing images. You can then click on Process images.

The image will display in a Cover image column in the holdings display.

To delete an image, click on the image in the holdings display. You will see a greyed out copy of the image with the option to delete.

Moving items

Items can be moved from one bibliographic record to another using the “Attach item” option

Visit the bibliographic record you want to attach the item to and choose “Attach item” from the “Edit” menu.

Simply enter the barcode for the item you want to move and click “Submit”

If this is the last remaining item attached to a bibliographic record you will be presented with a button to delete the original host record.

If you want to move all items to a new record creating only one bibliographic record you can use the merge Records tool instead.

Deleting items

Il y a plusieurs façons de supprimer des exemplaires. Si vous avez besoin de supprimer un exemplaire, vous pouvez ouvrir la page de détail de sa notice bibliographique, puis cliquer sur le bouton Modifier. Là, vous choisissez l’option Modifier les exemplaires.

Une liste des exemplaires est affichées. A côté de chaque exemplaire, un lien Supprimer permet de supprimer l’exemplaire s’il n’est pas en prêt.

Si vous êtes sûr que tous les exemplaires attachés à votre notice ne sont pas actuellement en prêt, vous pouvez utiliser l’option “Supprimer tous les exemplaires” dans le menu “Modifier”.

You can also enable StaffDetailItemSelection to have checkboxes appear to the left of each item on the detail display. You can then check off the items you would like to delete and click “Delete selected items” at the top of the list.

Finally you can use the batch delete tool to delete a batch of items.

Batch deleting items

• Get there: More > Cataloging > Batch editing > Batch item deletion

This tool will allow you to delete a batch of item records from Koha.

From the tool, choose to either upload a file of barcodes or itemnumbers, or scan item barcodes one by one into the box below the upload tool.

Once the file is uploaded or the barcodes listed, click “Continue.”

You will be presented with a confirmation screen. From here you can uncheck the items you don’t want to delete. You can check the “Delete records if no items remain” box to delete the bibliographic record if the last item is being deleted.

Note

Items that are the last item attached to a bibliographic record with one or more record-level holds will be automatically unchecked. You will need to delete the hold before deleting the item.

Items that are checked out will also be automatically unchecked. They will need to be checked in before they can be deleted.

If your file (or list of scanned barcodes) has more than 1000 barcodes, Koha will be unable to present you with a list of the items. You will still be able to delete them, but not able to choose which items specifically to delete or delete the bibliographic records.

Click “Delete selected items.”

Note

If the items are checked out the items will not be deleted.

The deletion job will be enqueued in the background jobs.

To see the deletion details, click “View detail of the enqueued job”.

To delete a new batch of items, click “New batch item deletion”.

Batch deleting items from the bibliographic record

The batch item deletion tool is also available from the bibliographic record details page.

From the bibliographic record details page, click the “Edit” button and choose the “Delete items in a batch” option.

This will open the batch item deletion tool for the items of the specific record.

Batch deleting items from a report

The batch item deletion tool is also available from reports results when the results contain itemnumbers.

When the report contains the itemnumber, the option “Batch operations with X visible records” will automatically appear. This option contains batch item modification ans batch item deletion.

By default, only 20 results are shown when running reports, therefore, the batch deletion will only be done on 20 results. If you have more results that you want to delete in a batch, make sure to change the number of results per page before choosing the batch operation.

Item specific circulation history

Chaque notice bibliographique conserve l’historique de ses opérations de circulation (avec ou sans les informations relatives aux adhérents selon votre paramétrage). Mais chaque exemplaire a également sa propre page d’historique. Pour voir celle-ci, cliquez sur l’onglet Exemplaires de la notice que vous êtes en train de visualiser.

Sous le titre Historique, il y a un lien Voir l’historique des prêtes des exemplaires. En cliquant ce lien, la page historique des exemplaires s’affiche. Elle est sensiblement différente de l’historique de la notice bibliographique.

Creating labels

• Get there: More > Cataloging > Tools > Label creator

The label creator tool allows you to use layouts and templates which you design to print a nearly unlimited variety of labels including barcodes. Here are some of the features of the label creator tool:

• Customize label layouts

• Design custom label templates for printed labels

• Build and manage batches of labels

• Export single or multiple batches

• Export single or multiple labels from within a batch

• Export label data in one of three formats:

  • PDF - Readable by any standard PDF reader, making labels printable directly on a printer

  • CSV - Export label data after your chosen layout is applied allowing labels to be imported in to a variety of applications

  • XML - Included as an alternate export format

Label layouts

• Get there: More > Cataloging > Tools > Label creator > Manage > Layouts

A layout is used to define the fields you want to appear on your labels.

Adding a layout

To add a new layout, click on the “New” button at the top of the label creator tool and choose “Layout”.

Using the form that appears, decide what appears on your labels.

• “Layout name”: enter a name for the layout to help you identify it later.

• “Choose barcode type (encoding)”: if this is a barcode label, choose the encoding (Code 39 is the most common)

• “Choose layout type”: choose what type of information is printed on the label.

  • Only the bibliographic data is printed: only bibliographic information will appear on the label (this can be used for spine labels for example)

    

    Note

    Bibliographic data includes any of the data fields that may be mapped to your MARC frameworks.

  • Barcode precedes bibliographic data: the barcode will appear at the top of the label and the bibliographic information underneath

    

  • Bibliographic data precedes barcode: the bibliographic information will appear at the top of the label and the barcode underneath

    

  • Barcode and bibliographic data are printed on alternating labels: the bibliographic information will appear on one label, and the barcode on the next label, alternating for each item

    

  • Only the barcode is printed: only the barcode will appear on the label

    

• “Bibliographic data to print”: if you chose to print bibliographic data on the label, choose from the preset list of fields which fields should appear on the label and in which order. Alternatively, you can click on “List fields” and enter your own data.

  

  Note

  In “List fields”, you can specify any database field from the following tables (use the schema viewer (http://schema.koha-community.org) to find the field names):

  • items

  • biblioitems

  • biblio

  • branches

  You can also specify MARC subfields as a 4-character tag-subfield string, for example 254a for the title field in MARC21.

  You can also enclose a whitespace-separated list of fields to concatenate on one line in double quotes, for example « 099a 099b » or « itemcallnumber barcode ».

  Finally you can add in static text strings in single-quote, for example “Some static text here.”

• “Draw guide boxes”: choose if guidelines are printed around each label (this is useful when first setting up the label creator to check alignment with your label sheets)

• “Split call numbers”: choose if call numbers should be split (usually used on spine labels)

  Note

  Call number splitting rules are managed under Administration > Classification sources.

• “Text justification”: choose the text alignment (left, center or right)

• “Font”: choose the font type

  • Font type choices are currently limited to:

    • Times-Roman (regular, bold, italic, or bold-italic): a serif font type

    • Courier (regular, bold, oblique (italic), or bold-oblique (bold-italic)): a monospace font type

    • Helvetica (regular, bold, oblique (italic), or bold-oblique (bold-italic)): a sans-serif font type

• “Font size”: enter the font size in points

• “Oblique title”: choose if the title should be italicized

Click “Save” to save the new layout.

After saving, your layouts will appear under Manage > Layouts.

Editing a layout

To edit an existing layout, click on the “Manage” button at the top of the label creator tool and choose “Layout”.

In the table of currently available layouts, click the “Edit” button next to the layout you want to edit.

Change the necessary values and click “Save”.

Deleting a layout

To delete an existing layout, click on the “Manage” button at the top of the label creator tool and choose “Layout”.

In the table of currently available layouts, click the “Delete” button next to the layout you want to delete, and confirm the deletion.

Label templates

• Get there: More > Cataloging > Tools > Label creator > Manage > Label templates

A template is based on the label/card stock you are using. This might be Avery 5160 for address labels, Gaylord 47-284 for spine labels or Avery 28371 for your patron cards, just to give a couple of examples. These labels will include all of the information you will need for setting up in Koha. This information may be on the packaging, on the vendor’s website or it can be measured manually.

Adding a template

To add a new template, click on the “New” button at the top of the label creator page and choose “Label template”.

Using the form that appears you can define the template for your sheet of labels or cards.

• “Template ID”: this will be automatically generated after saving your template, this is simply a system-generated unique id

• “Template code”: enter a code for the template, the code should be something you can use to identify your template on a list of templates

• “Template description”: use this field to add additional information about the template

• “Units”: choose which measurement scale you’re going to be using for the template. This should probably match the unit of measurement used on the template description provided by the product vendor.

  

The measurements, number of columns and number of rows can be found on the packaging, on the vendor’s website or they can be measured manually.

• Page height: height of the page

• Page width: width of the page

• Label width: width of the label

  

• Label height: height of the label

  

• Top page margin: height between the top of the page and the top of the first row of labels

  

• Left page margin: width between the left side of the page and the left side of the first column of labels

  

• Top text margin: height between the top of the label and the top of the first line of text

  

• Left text margin: width between the left side of the label and the start of the text

  

  Note

  If you do not supply a left text margin in the template, a 3/16 » (13.5 point) left text margin will apply by default.

• Number of columns: number of columns of labels in a page, or number of labels per row

• Number of rows: number of rows of labels in a page, or number of labels per column

• Gap between columns: width between two columns of labels

  

• Gap between rows: height between two rows of labels

  

• A profile is a set of « adjustments » applied to a given template just prior to printing which compensates for anomalies unique and peculiar to a given printer (to which the profile is assigned).

  • Before picking a profile try printing some sample labels so that you can easily define a profile that is right for your printer/template combination.

  • After finding any anomalies in the printed document, create a profile and assign it to the template.

Click “Save” to save the new template.

After saving, your templates will appear under Manage > Label templates.

Editing a template

To edit an existing template, click on the “Manage” button at the top of the label creator page and choose “Label template”.

In the table of currently available templates, click the “Edit” button next to the template you want to edit.

Change the necessary values and click “Save”.

Deleting a template

To delete an existing template, click on the “Manage” button at the top of the label creator page and choose “Label template”.

In the table of currently available layouts, click the “Delete” button next to the layout you want to delete, and confirm the deletion.

Pinter profiles

• Get there: More > Cataloging > Tools > Label creator > Manage >

  Printer profiles

A profile is a set of « adjustments » applied to a given template just prior to printing which compensates for anomalies unique and peculiar to a given printer (to which the profile is assigned). This means if you set a template up and then print a sample set of data and find that the items are not all aligned the same on each label, you need to set up a profile for each printer to make up for the differences in printing styles, such as the shifting of text to the left, right, top or bottom.

If your labels are printing just the way you want, you will not need a profile.

Adding a printer profile

To add a new profile, click on the “New” button at the top of the label creator tool and choose “Printer profile”.

Using the form that appears you can create a profile to fix any problems with your template.

• “Printer name”: enter a name for the printer. It does not have to match your printer exactly, it is only used for reference within Koha, so you can use the printer model number or you can call it “the printer on my desk”.

• “Paper bin”: enter a name for the printer’s paper tray. Like the printer name, it is only used as a reference.

• “Template name” will be filled in once you have chosen which template to apply the profile to in the template edit form

• “Units”: define what measurement scale you’re using for your profile.

  

The next sections are used to adjust the label printing.

• Offset describes what happens when the entire image is off center either vertically or horizontally

• Creep describes a condition where the distance between the labels changes across the page or up and down the page

  Note

  For these values, negative numbers move the error up and to the left and positive numbers move the error down and to the right

  Example: the text is .25 » from the left edge of the first label, .28 » from the left edge of the second label and .31 » from the left edge of the third label. This means the horizontal creep should be set to .03 » to make up for this difference.

Click “Save” to save the new profile.

After saving, your profiles will appear under Manage > Printer profiles.

Once you have saved your new profile, you can return to the list of templates and edit the template that this profile is for.

Editing a printer profile

To edit an existing printer profile, click on the “Manage” button at the top of the label creator page and choose “Printer profiles”.

In the table of currently available printer profiles, click the “Edit” button next to the profile you want to edit.

Change the necessary values and click “Save”.

Deleting a printer profile

To delete an existing printer profile, click on the “Manage” button at the top of the label creator page and choose “Printer profiles”.

In the table of currently available profiles, click the “Delete” button next to the profile you want to delete, and confirm the deletion.

Label batches

• Get there: More > Cataloging > Tools > Label creator > Manage > Label batches

Batches are made up of the items for which you would like to print labels. Once in this tool you can search for the item records you would like to print out labels for.

Adding a label batch

Batches can be created in one of two ways. The first is to click the “Create label batch” link on the Staged MARC management page.

The other is to choose to create a new batch from the label creator tool

You will be brought to an empty batch with a box to scan barcodes or itemnumbers in to and an “Add item(s)” button at the bottom of the page.

You can either scan barcodes in to the box provided and click the “Add item(s)” button or you can click the “Add item(s)” button with the barcodes box empty. Clicking “Add item(s)” with nothing in the barcodes box will open a search window for you to find the items you want to add to the batch.

From the search results, click the check box next to the items you want to add to the batch and click the “Add checked” button. You can also add items one by one by clicking the “Add” link to the left of each item.

Once you have added all of the items click the “Done” button. Click again on the “Add item(s)” button to transfer the items from the barcode box to the batch. The resulting page will list the items you have selected.

If some items were added more than once by accident, you can click the “Remove duplicates” button. This will check barcodes and remove any duplicates from the batch.

If you need to remove some items from the batch, select them by checking the box on the right and click the “Remove selected items” button.

Optionally, you can add a description to this batch, in case you need to find it later. Enter a description in the “Batch description” field and click “Save description”. This description will appear in the “Currently available batches” page.

To print your labels, click the “Export full batch” button. To print only some of the labels, select the items and click the “Export selected item(s)” button. To print only one label from the batch, click the “Export” button to the right of that item. Either way you will be presented with a confirmation screen where you can choose your template and layout. If you’re using a sheet of labels that is not complete, you can enter the starting label (labels are counted horizontally).

You will then be presented with three download options: PDF, CSV, or XML.

After saving your file, simply print on the blank labels you have in your library.

The batch is saved for later use, if needed, and is accessible under Manage > Label batches.

Editing a label batch

To edit an existing label batch, click on the “Manage” button at the top of the label creator page and choose “Label batches”.

You will access currently available batches.

You can print one or more batches directly from this page by checking the box to the right of the batch or batches to print and clicking “Export selected”.

To edit a batch, click the “Edit” button next to the batch you want to edit.

Deleting a label batch

To delete an existing label batch, click on the “Manage” button at the top of the label creator page and choose “Label batches”.

You will access currently available batches.

Click the “Delete” button next to the batch you want to delete, and confirm the deletion.

You can also delete a batch from the batch page itself, by clicking the “Delete batch” button above the table of items in the batch.

Barcode range

• Get there: More > Cataloging > Tools > Label creator > New > Barcode range

If you want to print your barcode labels in advance, before even cataloging the items, you can choose to add a batch of a range of barcodes.

Click “New” and choose “Barcode range” from the label creator tool.

Enter the starting and ending barcodes.

Avertissement

The barcode range tool does not accept leading zeroes. If you enter 0001234 the barcode that will be printed will be 1234.

Click “Print range”.

You will be presented with the confirmation screen where you can choose your template and layout and enter the starting label if using an incomplete sheet of labels.

Note

The only download option for barcode ranges is PDF.

Save the file and print it on a blank sheet of labels.

Barcode generator

• Get there: More > Cataloging > Tools > Barcode generator

Koha offers a barcode generator tool that can be used to create images of barcodes for various uses (in notices for example).

This tool can be used for a number of types of barcodes, as well as QR codes.

It will create an image from the given barcode in the chosen barcode format and also generate a unique HTML tag which can be used anywhere.

To generate a new image, fill out the form.

• Barcode type: choose the barcode type to be used

  Note

  Most barcode types allow only numerical characters.

  The following allow alphanumeric characters:

  • Code39

  • NW7

  • QRcode

  Some barcode types (EAN13, EAN8, UPCA, and UPCE) expect specific patterns (which can be found here https://barcode.tec-it.com/en/ under EAN/UPC).

• Hide text: check this box if you only want the actual barcode on the image. If unchecked, the number will be printed in human readable characters under the barcode.

• Barcode height: enter the height in pixels the barcode image should have

• Barcode: enter the barcode to be printed

Click “Show barcode”.

On the right of the screen is the barcode image, which can be downloaded or printed.

Under the image, there is an HTML “img” tag. You can copy the tag and paste it anywhere you need the barcode to appear (however, note that it is only available in the staff interface).

For a QR Code, the options are slightly different. Instead of “Barcode height”, there is a “QR Code module size” field that can be adjusted by slider. The number refers to the size in pixels of each black or white square in the code (modules). The larger the modules, the larger the image will be.

A QR Code can take not only alphanumeric characters, but any type of textual information, such as a URL or even a short text.

Quick spine label creator

• Get there: More > Cataloging > Tools > Quick spine label creator

Note

This tool does not use the label layouts or templates, it simply prints a spine label in the first spot on the label sheet, or on a single label from a label printer.

• Define the fields you want to print on the spine label in the SpineLabelFormat system preference

• Format your label printing by editing spinelabel.css found in koha-tmpl/intranet-tmpl/prog/en/css/

To use this tool you simply need the barcode for the book you’d like to print the spine label for, and click “View spine label”.

From the page that appears, click “Print this label”.

If for some reason you need to change the callnumber, click “Edit this label”. The lock icon on the button will become unlocked, and you will be able to click on the callnumber to edit it.

Autorités

Les notices d’autorité sont un moyen de contrôler les champs dans vos notices bibliographiques. Cela vous permet de contrôler les sujets, les noms propres par exemple.

Adding authorities

To add a new authority record you can either choose the authority type from the “New authority” button or search another library by clicking the “New from Z39.50” button.

Si vous choisissez de saisir une nouvelle autorité manuellement, un formulaire vous permettra de saisir tous les détails nécessaires concernant votre notice d’autorité.

Pour développer des valeurs manquantes, il suffit de cliquer sur le titre et les sous-champs apparaissent. Pour dupliquer un champ ou sous-champ, il suffit de cliquer sur le signe plus (+), à droite de l’étiquette. Pour utiliser les plugins d’assistance, cliquez simplement sur le bouton (…), à droite du champ.

Lorsque vous liez des autorités à d’autres vedettes, vous pouvez utiliser le plugin de recherche d’autorités en cliquant sur le lien à droite du champ

Ici vous pouvez chercher dans votre fichier autorités, l’autorité à lier. Si vous ne la trouvez pas, vous pouvez cliquer sur le bouton “Ajouter nouvelle autorité” et ajouter l’autorité à lier. Ce plugin vous permet aussi de choisir le lien entre les autorités.

Si vous désirer cherchez la notice d’autorité dans le catalogue d’une autre bibliothèque, une boîte de recherche sera mise à votre disposition.

Dans la page de résultats, vous pouvez cliquer sur le lien “Importer” à droite de la notice que vous désirez importer dans Koha.

Un formulaire vous permettra de modifier l’autorité avant de l’enregistrer dans votre système.

Searching authorities

Dans la page des autorités, vous pouvez rechercher les termes existants et les notices bibliographiques qui y sont rattachées.

From the results you will see the authority record, how many bibliographic records it is attached to, an “Actions” menu that includes the ability to edit, merge and delete (if there are no bibliographic records attached).

Clicking on the “Details” link to the right of the authority record summary will open the full record and the option to edit the record.

If the authority has “See also’s in it you will see those broken out on the search results, clicking the linked headings will run a search for that heading instead.

Editing authorities

Les autorités peuvent être modifiées en cliquant sur le résumé de l’autorité depuis les résultats de recherche et en cliquant ensuite sur le bouton “Modifier” au-dessus de la notice. Ou en cliquant sur le lien “Modifier” à gauche des résultats de de la recherche d’autorité.

Once you’ve made the necessary edits, simply click “Save”.

Depending on the number of bibliographic records this authority record is linked to, the bibliographic records may be updated right away. This depends on the value in the AuthorityMergeLimit system preference (the default is 50). If the number of bibliographic records is under the value of AuthorityMergeLimit, the bibliographic records will be changed right away. If the number of bibliographic records exceeds the value of AuthorityMergeLimit, they will only be updated when the merge_authorities.pl script is run.

Pour supprimer une autorité, vous devez d’abord être sûr qu’elle n’est pas lié à des notices bibliographiques. Si ce n’est pas le cas, un lien Supprimer est affiché à droite de l’autorité sur la page de résultat d’une recherche et un bouton Supprimer est également affiché sur la page de détail de l’autorité.

Merging authorities

If you have duplicate authority records you can merge them together by clicking the “Merge” link, found in the Actions menu, next to two results on an authority search.

Après avoir cliqué sur “Fusionner” du premier résultat, vous verrez cette autorité classée en haut des résultats.

Puis, vous cliquez sur “”Fusionnez”” à la hauteur du second résultat que vous souhaitez fusionner.

Il vous sera demandé laquelle des deux notices vous souhaitez garder et laquelle sera supprimée après la fusion.

Les deux notices s’afficheront en mode MARC dans des onglets distincts. Par défaut, tous les champs de la première notice seront sélectionnés. Désélectionnez les champs que vous ne voulez pas conserver. Allez ensuite dans le second onglet et choisissez les champs que vous voulez y prendre.

Une fois vos sélections effectuées, cliquez sur le bouton “Fusionner”. La notice principale contiendra maintenant les données que vous avez choisies, et la seconde notice sera supprimée.

If you have two authority records for the same heading in different frameworks, you can merge them together by clicking the ‘Merge’ link, found in the actions menu, next to two results on an authority search. For example, these authority records using different frameworks can be merged.

If you select the “Merge” link, found in the action menu of the top record.

You will see that authority record listed at the top of the results.

Next you need to select ‘Merge’ next to the second result you’d like to merge.

You will be asked which of the two records you would like to keep as your primary record and which will be deleted after the merge. You will also use the dropdown menu to pick which framework to use.

You will be presented with the MARC for both of the records (each accessible by tabs labeled with the authority numbers for those records). By default the entire first record will be selected, uncheck the fields you don’t want in the final (destination) record and then move on to the second tab to choose which fields should be in the final (destination) record.

The « ref » record (the primary record) will be in the framework that you chose:

Once you have completed your selections click the ‘Merge’ button. The primary record will now contain the data you chose for it and the second record will be deleted.

The MARC tag of the linked headings will have been updated accordingly.

Exporting data

• Get there: More > Cataloging > Export > Export catalog data

Koha comes with a tool that will allow you to export your bibliographic, items and authority records in bulk. This can be used to send your records to fellow libraries, organizations or services; or simply for backup purposes.

Exporting bibliographic records

At the top of the screen you need to pick what data you’re exporting. If you’re exporting bibliographic records with or without the item information, click the “Export bibliographic records” tab.

• Fill in the form in order to limit which records are exported (all fields are optional)

  

  • From biblionumber / To biblionumber: limit the exportation to a range of biblionumbers

  • Item type: limit to a specific item type, or several item types

    Avertissement

    This limit will use the item type defined in the item-level_itypes system preference.

    If the item-level_itypes system preference is set to “specific item” and there are no items attached to a bibliographic record, that record will not be exported.

    To export all bibliographic records of a specific type, the item-level_itypes system preference needs to be set to “bibliographic record”.

  • With items owned by the following libraries: limit to a specific library or group of libraries

    Avertissement

    This is a filter; if this is set to the default value (all libraries selected), or select one or more libraries, bibliographic records with no items attached will not be exported.

    To get bibliographic records with no items, “clear all” selected libraries (i.e. de-select all libraries).

  • Call number range: limit to a call number range

  • Accession date (inclusive): limit to an acquisition date range

  • Use a file: you can load a file of biblionumbers of the records to be exported. The file type needs to be .csv or .txt

  • Don’t export items: by default, items will be exported. Check this box to only export bibliographic records

  • Remove items not owned by selected libraries: check this box to limit the exported items to items from the library you’re logged in as (if the “With items owned by the following libraries” field above is set to “All”) or to the library or libraries selected above

  • Don’t export fields: enter which fields that should not be exported, separated by spaces. This can be handy if you’re sharing your data, you can remove all local fields before sending your data to another library

  • File format: choose the file type, MARC or MARCXML

  • File name: if needed, enter a new file name for the export file

  • Click “Export bibliographic records”

Exporting authority records

At the top of the screen you need to pick what data you’re exporting. If you’re exporting authority records, click the “Export authority records” tab.

• Fill in the form in order to limit which records are exported (all fields are optional)

  

  • From authid / To authid: limit the exportation to a range of authids

  • Authority type: limit the exportation to records of a specific authority type

  • Use a file: you can load a file of authids of the records to be exported. The file type needs to be .csv or .txt

  • Next choose fields that you would like to exclude from the export separated by a space (no commas)

  • Don’t export fields: enter which fields that should not be exported, separated by spaces.

    • To exclude all subfields of the 200 field, for example, just enter 200

    • To exclude a specific subfield, enter it beside the field value. For example, 100a will exclude just the subfield “a” of the 100 field

  • File format: choose the file type, MARC or MARCXML

  • File name: if needed, enter a new file name for the export file

  • Click “Export authority records”

Inventory

• Get there: More > Cataloging > Reports > Inventory

Koha’s inventory tool can be used in one of three ways:

1. By creating a shelf list that you can then mark items off on;

2. By uploading barcodes gathered by a portable scanner;

3. By comparing barcodes gathered by a portable scanner or scanned directly to a generated shelf list.

Creating a shelf list

If you do not have the ability to use your barcode scanner on the floor of the library, the option available to you is to generate a shelf list based on criteria you enter. You can then print it to use while walking around the library checking your collection or use it directly in Koha on a portable device.

First, choose the criteria for the items you want to print out on a list. All parameters are optional, but if none are selected, the resulting list might be quite large.

• Library: choose the branch you want to check, as well as if that branch is the home library or the current holding library of the items.

• Shelving location (items.location) is: you can filter by location.

• Item callnumber between … and …: you can also limit the list to a specific range of callnumbers.

• Call number classification scheme: if filtering by call number, make sure to choose the correct classification scheme

You can filter even more with item statuses (not for loan status, lost status, withdrawn status or damaged status). Check the boxes next to the statuses you want to include. For example, if you are using the list to shelf read, check only the “for loan” status as the other items probably won’t be on the shelves.

• Last inventory date: enter a date here to skip items that have been marked as seen recently.

• Skip items on loan: check this box to filter out loaned items from the list.

• Skip items on hold awaiting pickup: check this box to filter out items that are awaiting pickup by patrons

• Item types: check the boxes next to the item types you want to include in your shelf list

• Export to CSV file: check this box to generate a CSV file for altering in an application on your desktop. If this box is unchecked, the list will be presented on the screen.

Click on “Submit” to generate your shelf list.

Once you have found the items on your shelves, return to this list and check the boxes next to the items you found. Next, click on one of the three buttons to continue:

• Mark seen and quit: updates the “last seen” date of the checked items to today and returns to the previous screen.

• Mark seen and continue: updates the “last seen” date of the checked items to today and shows the next page of the list.

• Continue without marking: doesn’t update any of the items on this page and shows the next page of the list.

Uploading barcodes with a scanner

If you have a portable scanner (or a laptop and USB scanner) you can walk through the library with the scanner in hand and scan barcodes as you come across them (on a laptop, scan the barcodes into a text file or directly into the on screen text box). Once finished you can then upload the text file generated by the scanner to Koha.

• Set inventory date to: choose the date you want to mark all items as last seen.

• Compare barcodes list to results: uncheck for this method.

• Do not check in item scanned during inventory: unless this is checked, Koha will check in items scanned, as it is assumed that they are on the shelf and so not loaned out. If you do not want to check in scanned items, check this option.

• Check barcodes list for items shelved out of order: if this option is checked, Koha will compare the call numbers and make sure they are in the correct order.

Click “Submit”. This will update all the items” “last seen” date to the chosen date.

Once you have the updated the last seen date for all items scanned during the inventory it is possible to use reports to identify items that were not scanned and can therefore be assumed missing (you can use the batch item modification tool to change the LOST status of these items). There are sample reports you can use on the Koha SQL Reports Library.

Comparing scanned barcodes to a shelf list

Alternatively, you can combine the two methods to automatically compare a list of scanned barcodes with a generated list.

First, upload you barcode file or scan the barcodes in the box.

• Set inventory date to: choose the date you want to appear in the items” “last seen” field.

• Compare barcodes list to results: should automatically be checked.

• Do not check in items scanned during inventory: make sure to check this option if you do not want the scanned items to be automatically checked-in if they are checked-out.

Choose the filters (library, shelving location, callnumbers, statuses or item types) to generate a list with which to compare your barcodes. Click on “Submit”.

Note

Depending on the number of barcodes you are comparing, this may take a few minutes. It is not recommended to compare lists of more than 1000 barcodes as this may cause a session timeout.

Once Koha has finished comparing the barcodes file to the generated list, it will return the number of items updated and a list of problematic items.

Note

Unlike when creating a shelf list, the list that will be presented here will only contain the items that Koha has determined are problematic.

• Missing (not scanned): the item is in the generated list but not in the barcodes file.

• Found in wrong place: the item is in the barcodes list, but not in the generated list.

• Still checked out: the item is checked out, but is in the generated list. It was not automatically checked in.

• No barcode: the barcode doesn’t exist.

• Unknown not-for-loan status: the item has “not for loan” status that is not in the NOT_LOAN authorized values list

• Item may be shelved out of order: the callnumber is out of order

Cataloging guides

Bibliographic record cataloging cheat sheet

Champ	Label	Description	instructions
000	LEADER	Describes the record(i.e. surrogate) – is it a record for a monograph? A serial?	Click in this field to fill it in. Then set « Bibliographic level » to “a” for articles or “s” for serials. Otherwise, leave everything as is.
001	CONTROL NUMBER	Numéro d’accès.	Enter the accession number written inside the item here. For articles and items which do not have accession numbers, leave blank.
003	CONTROL NUMBER IDENTIFIER	Your MARC organizational code	Click in this field to fill it in (will auto fill if you have your MARCOrgCode preference set).
005	D & T LATEST TRANSACTION	Date et heure actuelles.	Cliquer dans ce champ pour le remplir.
008	FIXED-LENGTH DATA ELEMENTS	Field containing computer-readable representations of a number of things.	Generally you will only use “s” (single) or “m” (multiple) options for position 06- use the former when the item was published in a single year, the latter when it was published over the course of several. If there is a single date, only enter a date in the first date field (positions 07-10). Enter the three-digit country code in positions 15-17, being sure to add spaces if the country code is fewer than three characters long. If there is an index, note that fact in position 31. Enter the three-letter language code in positions 35-37.
010	LCCN	A number assigned by the Library of Congress to uniquely identify the work.	Check on the copyright page of the book (if it was published in the US) or the LC catalog for this number. If you can’t find it, don’t worry about it.
020	ISBN	Numéro unique utilisé par les éditeurs pour identifier les livres.	If this number isn’t listed on the book, there probably isn’t one.
022	ISSN	Unique number used by publishers to identify serials.	If this number isn’t listed on the book, there probably isn’t one.
033	DATE/TIME OF EVENT	Used for auction dates. Required for auction catalogs.	For auctions that took place on only one day, enter the date of the auction in the format YYYYMMDD in the subfield “a” and a “0” in the first indicator. For auctions that took place over two consecutive days or any number of non-consecutive days, create a subfield “a” for each day with the date in the format YYYYMMDD, and put a “1” in the first indicator. For auctions that took place over more than two consecutive days, create a subfield “a” (in format YYYYMMDD) for the first day and a subfield “a” (also in format YYYYMMDD) for the last day, and put a “2” in the first indicator.
040	SOURCE DE CATALOGAGE	Identifie quelles bibliothèques ont créé et modifié la notice.	For imported records, add a subfield “d” with your OCLC code as the value. For new records, make sure that the subfield “c” with your OCLC code as the value.
041	LANGUAGE CODE	Identifies all the languages used in an item, when two or more languages are present.	For significant portions of a text in a given language, there should be a subfield “a” with that language code. If there are only summaries or abstracts in a specific language, create a subfield “b” with that language code.
100	MAIN ENTRY–PERSONAL	Authorized form of the main author’s name	See Authorized headings sheet and AACR2. The first indicator should generally be a “1”, to indicate that the entry is surname first. If the name consists only of a forename, however, the first indicator should be “0”.
110	MAIN ENTRY–CORPORATE	Authorized form of the name of the main corporate author. Required for auction catalogs.	Auction catalogs should use a 110 field rather than a 100 field. See Authorized headings sheet and AACR2. Set the first indicator to “2”.
111	MAIN ENTRY–MEETING	Authorized form of the name of a meeting which acted as a main offer (e.g. conference proceedings)	See Authorized headings sheet and AACR2. Set the first indicator to “2”.
245	TITLE STATEMENT	Transcription of the title statement from the title page (or chief source of information)	Enter the title in subfield “a”, the subtitle in subfield “b”, and the statement of responsibility in subfield “c”. If you are creating a record for a single volume or part of a multi-part item, you should put the part number in subfield “n” and the part title in subfield “p.” For auction catalogs, the date (in “MM/DD/YYYY” format) should be listed in square brackets in subfield “f”. See ISBD punctuation sheet. Set the first indicator to “0” if there is no author, otherwise set it to “1”. Set the second indicator to the number of non-filing characters (i.e. characters in an initial articles plus the space… for « The  » set the second indicator to “4”).
246	Variante de titre de l’oeuvre	Alternate form of title for searching and filing purposes	If the patron might look for the work under a different title, enter it here. Do not include initial articles. The first indicator should be “3”, unless the title is merely a variant spelling, in which case the first indicator should be “1”.
250	Mention d’édition	Transcription of the edition statement from the title page (or chief source of information)	Transcribe the edition statement exactly as it appears on the title-page. You may abbreviate if the edition statement is very long.
260	Publication (imprimé)	Information adhérent	Put the location of publication in subfield “a”, the publisher in subfield “b”, and the year (or probable year) in subfield “c”. See ISBD punctuation sheet.
264	PRODUCTION, PUBLICATION ETC.	Production, Publication, Distribution, Manufacture, and Copyright Notice.	Put the location of publication in subfield “a”, the publisher in subfield “b”, and the year (or probable year) in subfield “c”. See ISBD punctuation sheet. The label is set dynamically from the second indicator so generally this would be set to “1” for Publisher: .
300	PHYSICAL DESCRIPTION	Description physique	Enter the pagination statement in subfield “a”, a brief description of « special » contents such as illustrations or maps in subfield “b” (see AACR2), and the size of the item in subfield “c”. See ISBD punctuation sheet.
490	SERIES STATEMENT	Shows the series statement exactly as it appears on the item.	Transcribe the series statement into subfield “a” with the volume number in subfield “v”. See ISBD punctuation sheet. Set the first indicator to “1” if you are using an 830. As a general rule, you should do so.
500	GENERAL NOTE	Notes that don’t fit anywhere else.	Enter notes as full sentences, with a separate 500 field for each distinct topic.
501	WITH NOTE	Notes whether the work is bound with the works described by other records.	Put description of relationship in subfield “a”.
504	BIBLIOGRAPHY, ETC. NOTE	Indicates whether the work includes a bibliography.	If the work includes a bibliography and index, put the text « Includes bibliographical references (p. XXX-XXX) and index. » in subfield “a”. If the work does not include an index, remove that part of the sentence. If the references are scattered throughout the work and not gathered into a distinct sentence, remove the parenthetical statement.
505	FORMATTED CONTENTS	List of contents in a standard format. Unformatted contents can be listed in a 500 (General Note) field.	See ISBD punctuation sheet. Set the first indicator to “0”. If you are separately coding authors and titles, set the second indicator to “0”. Otherwise, leave the second indicator blank.
518	DATE/TIME OF EVENT NOTE	Used for auction dates.	For auction catalogs, enter the date of the auction in the format “January 2, 1984” in the subfield “a”
520	SUMMARY, ETC.	A brief summary or abstract of the book or article.	In general you do not need to write a summary. A summary might be called for, however, with items that cannot be easily reviewed by a patron, such as books with highly acidic paper or CD-ROMs.
546	LANGUAGE NOTE	Note describing the languages used in the work	Only needed for works in multiple languages. See ISBD punctuation sheet.
561	PROVENANCE INFORMATION	Describes the previous ownership of the item.	Used only for rare books.
563	BINDING INFORMATION	Describes the binding of the item.	Used only for rare books.
590	LOCAL NOTE	Local notes. Required for auction catalogs.	Used for auction catalogs to indicate what types of coins are sold in the auction- Roman, Greek, etc.
600	SUBJECT ADDED–PERSONAL	Authorized form of personal names for people discussed in the work	See Authorized headings sheet and AACR2. The first indicator should generally be a “1”, to indicate that the entry is surname first. If the name consists only of a forename, however, the first indicator should be “0”. If you found the name in the LC authority file, set the second indicator to “0”. Otherwise set the second indicator to “4”.
610	SUBJECT ADDED–CORPORATE	Authorized form of corporate names for organizations discussed in the work	See Authorized headings sheet and AACR2. Set the first indicator to “2”. If you found the name in the LC authority file, set the second indicator to “0”. Otherwise set the second indicator to “4”.
611	SUBJECT ADDED–MEETING	Authorized form of meeting names for meetings discussed in the work	See Authorized headings sheet and AACR2. Set the first indicator to “2”. If you found the name in the LC authority file, set the second indicator to “0”. Otherwise set the second indicator to “4”.
630	SUBJECT ADDED–UNIFORM TITLE	Authorized form of titles for other works discussed in the work	See Authorized headings sheet and AACR2. Set the first indicator to the number of non-filing characters (i.e. characters in an initial articles plus the space… for « The  » set the first indicator to “4”). If you found the name in the LC authority file, set the second indicator to “0”. Otherwise set the second indicator to “4”.
650	SUBJECT ADDED–TOPICAL	Library of Congress Subject Heading terms describing the subject of the work	See Authorized headings sheet and AACR2. If you found the name in the LC authority file, set the second indicator to “0”. Otherwise set the second indicator to “4”.
651	SUBJECT ADDED–GEOGRAPHICAL	Library of Congress Subject Heading geographical terms describing the subject of the work	See Authorized headings sheet and AACR2. If you found the name in the LC authority file, set the second indicator to “0”. Otherwise set the second indicator to “4”.
655	INDEX TERM–GENRE/FORM	Describes what an item is as opposed to what the item is about.	Generally used only for auction catalogs, which should have the genre heading « Auction catalogs. » (make sure to find the authorized heading!) If you found the name in the LC authority file, set the second indicator to “0”. If you are using a term from a specific thesaurus, set the second indicator to “7” and put the code for the thesaurus in subfield “2”. Otherwise set the second indicator to “4”.
690	LOCAL SUBJECT ADDED–TOPICAL	Used for headings from any custom subject authority file.	If there is no appropriate LCSH term, you can use a 690 with subject headings you find on other items in the catalog.
691	LOCAL SUBJECT ADDED–GEOGRAPHICAL	Used for headings from any custom subject authority file.	If there is no appropriate LCSH term, you can use a 691 with subject headings you find on other items in the catalog.
700	ADDED ENTRY–PERSONAL	Used for second authors and other persons related to the production of the work.	See Authorized headings sheet and AACR2. The first indicator should generally be a “1”, to indicate that the entry is surname first. If the name consists only of a forename, however, the first indicator should be “0”.
710	ADDED ENTRY–CORPORATE	Used for corporate bodies related to the production of the work (e.g. publishers).	See Authorized headings sheet and AACR2. Set the first indicator to “2”.
711	ADDED ENTRY–MEETING	Used for meetings related to the production of the work (e.g. symposia that contributed to the work).	See Authorized headings sheet and AACR2. Set the first indicator to “2”.
730	ADDED ENTRY–UNIFORM TITLE	Used for uniform titles related to the production of the work (e.g. a work that inspired the present work)	See Authorized headings sheet and AACR2. Set the first indicator to the number of non-filing characters (i.e. characters in an initial articles plus the space… for « The  » set the first indicator to “4”).
773	HOST ITEM ENTRY	Describes the larger bibliographic unit that contains the work (e.g. book or journal containing the article being described in the current record)	If the host publication is author main entry, enter the authorized form of the author’s name in subfield “a”. Put the title in subfield “t”. If the host publication is an independent work, put publication information in subfield “d”. When available, ISSN and ISBN should always be used in, in subfields “x” and “z” respectively. Relationship information (e.g. volume number, page number, etc.) goes in subfield “g”. Subfield “q” contains an encoded representation of the location of the item: volume, issue, and section numbers are separated by colons, and the first page is entered following a “<” at the end of the subfield. See ISBD punctuation sheet. Set the first indicator to “0”. If you want the label « In: » to be generated, leave the second indicator blank. If you want something else displayed before the 773 text, set the second indicator to “8” and add a subfield “i” with the label you want at the beginning of the field (e.g. « $iOffprint from: »).
830	SERIES ENTRY–UNIFORM TITLE	Authorized form of the series name transcribed in the 490 field. Often this will just be the same as the 490.	See Authorized headings sheet and AACR2. Set the second indicator to the number of non-filing characters (i.e. characters in an initial articles plus the space… for « The  » set the second indicator to “4”).
852	LOCATION/CALL NUMBER	Provides the section name for pre-barcode books, pamphlets, and some articles and serials.	Do not put anything in this field if you are cataloging a volume which gets only one record and a barcode. If the item does not get a barcode, or you are currently creating a record for an article in a volume, put the section in subfield “a” (see ANS cataloging documentation), and the call number in subfield “i”. Set the first indicator to “8”.
856	ELECTRONIC ACCESS	Links to material available online.	Put the URL of any electronic copies or summaries, etc. in subfield “u” and a link title in subfield “y”. Set the first indicator to “4”.
942	ADDED ENTRY ELEMENTS (KOHA)	Used for Koha-specific data.	Set the subfield “c” to the appropriate item type.

Table: Cataloging Guide

Koha-specific fields

Koha uses three fields to store information specific to it.

At the record level, 942 is used to store information such as record-level item type, record-level call number and classification scheme.

The item (holding) information is stored in 952 in MARC21 and 995 in UNIMARC.

System control numbers for Koha are stored in 999 in MARC21 and 090 in UNIMARC.

Added entry elements (942)

942$0 - Koha issues (borrowed), all copies

This field contains the total number of issues/checkouts of all items of this record. It is populated using the update_totalissues.pl cronjob.

Mapped to: biblioitems.totalissues

Indexed in: totalissues

Avertissement

This field should not be editable nor edited manually.

942$2 - Source of classification or shelving scheme

This field contains the source of classification used by the record’s call number (942$h and 942$i).

There is a choice of classification sources as they are defined in administration. If no classification scheme is entered, the system will use the value entered in the DefaultClassificationSource preference.

The source of classification will be used, along with the call number itself (942$h and 942$i) to create the normalized call number used when sorting by call number.

Mapped to: biblioitems.cn_source

Indexed in: cn-bib-source

942$6 - Koha normalized classification for sorting

This field contains the normalized call number used for sorting, based on the record-level call number (942$h and 942$i) and the classification source (942$2).

Mapped to: biblioitems.cn_sort

Indexed in: cn-bib-sort

Avertissement

This field should not be editable nor edited manually.

942$c - Koha item type

This field contains the record-level item type.

The record-level item type is used in various places in Koha.

• The value from 942$c is copied to 952$y as the default value when adding a new item to that record

• The record-level item type can be used for the circulation rules if the item-level_itypes system preference allows it (this system preference lets you choose between using the record-level or item-level item type for the circulation rules, among other things)

• The record-level item type is indexed and used in the search (see also the AdvancedSearchTypes system preference) as well as the facets (this is useful to find records that don’t have items, like records for online resources, ebooks, pdf files, etc.)

• The record-level item type is used for record-level/ »next available » holds

• The record-level item type is used for record-level article requests

• The record-level item type is displayed in various tables in the staff interface, in the circulation module among other places (it is possible to hide unwanted columns in the “Table settings” section of the Administration module)

Mapped to: biblioitems.itemtype

Indexed in: itemtype (mc-itemtype), itype (mc-itype)

942$e - Edition

This field contains the edition information.

942$h - Classification part

This field contains classification part of the call number. It is used, along with 942$2 and 942$i to create the normalized call number (942$6) used when sorting by call number.

Mapped to: biblioitems.cn_class

Indexed in: cn-class

942$i - Item part

This field contains item part of the call number. It is used, along with 942$2 and 942$h to create the normalized call number (942$6) used when sorting by call number.

Mapped to: biblioitems.cn_item

Indexed in: cn-item

942$k - Call number prefix

This field contains prefix to the call number.

Mapped to: biblioitems.cn_prefix

Indexed in: cn-prefix

942$m - Call number suffix

This field contains suffix to the call number.

Mapped to: biblioitems.cn_suffix

Indexed in: cn-suffix

942$n - Suppress in OPAC

If the OpacSuppression system preference is set to “hide”, this field indicates if the record should be hidden from the OPAC.

In this field, “1” means the record will be hidden in the OPAC, and “0” (or empty) means the record will be visible in the OPAC.

You can use the YES_NO authorized value list in this field if you don’t want to remember the numerical values.

Indexed in: suppress

942$s - Serial record flag

This field is used by the serials module to indicate whether or not the record is associated with a serial subscription.

Mapped to: biblio.serial

Avertissement

This field should not be editable nor edited manually.

Location and item information (952)

Koha uses field 952 to store item (holding) information.

952$0 - Withdrawn status

Uses

• This field is used to set the withdrawn (weeded) status of the item.

• You can use the withdrawn status to weed items without deleting the items.

• In the search results, the withdrawn item will be marked as unavailable.

Effects on circulation

• A withdrawn item will not be able to be checked out.

• A withdrawn item will not be able to be checked in unless the BlockReturnOfWithdrawnItems system preference allows it.

Values

• The withdrawn status is numerical, “0” (or empty) means “not withdrawn” and any other number means “withdrawn”.

• By default, the field is associated with the WITHDRAWN authorized value category so you don’t have to remember the numerical values. The default values in the WITHDRAWN authorized value category are:

  • 1: Withdrawn

Display

• Staff interface

  • Search results (withdrawn items will be marked as unavailable)

  • Holdings table in the record’s detail page

  • “Items” tab of the bibliographic record, “Withdrawn status” under “Statuses”

• OPAC

  • Search results (withdrawn items will be marked as unavailable)

  • Holdings table in the record’s detail page

  • To hide withdrawn items from the OPAC, use the OpacHiddenItems system preference.

Mapped to: items.withdrawn

Indexed in: withdrawn

952$1 - Lost status

Uses

• This field is used to set the lost status of the item.

• You can use the lost status to mark items as lost or missing

• In the search results, the lost item will be marked as unavailable.

• Marking an item lost while it is checked out can charge the replacement cost (952$v) to the patron (see WhenLostChargeReplacementFee), as well as a processing fee (the processing fee is set at the item type level)

• The lost status can be changed automatically after a number of days overdue with the longoverdue.pl cronjob

Effects on circulation

• The ability to check out a lost item depends on the IssueLostItem system preference.

• The ability to check in a lost item depends on the BlockReturnOfLostItems system preference.

Values

• The lost status is numerical, “0” (or empty) means “not lost” and any other number means “lost”.

• By default, the field is associated with the LOST authorized value category so you don’t have to remember the numerical values. The default values in the LOST authorized value category are:

  • 1: Lost

  • 2: Long Overdue (Lost)

  • 3: Lost and Paid For

  • 4: Missing

Display

• Staff interface

  • Search results (lost items will be marked as unavailable)

  • Holdings table in the record’s detail page

  • “Items” tab of the bibliographic record, “Lost status” under “Statuses”

• OPAC

  • Search results (lost items will be marked as unavailable)

  • Holdings table in the record’s detail page

  • It’s possible to configure Koha so that lost items don’t display in the OPAC with the hidelostitems system preference.

Mapped to: items.itemlost

Indexed in: lost

952$2 - Source of classification or shelving scheme

Uses

• This field contains the source of classification used by the record’s call number (952$o).

• The source of classification will be used, along with the call number itself (952$o) to create the normalized call number (952$6) used when sorting by call number.

Values

• There is a choice of classification sources as they are defined in administration.

• If no classification scheme is entered, the system will use the value entered in the DefaultClassificationSource preference.

Display

• This is not displayed either in the OPAC or in the staff interface. The information is only available in the item’s editing form.

Mapped to: items.cn_source

Indexed in: classification-source

952$3 - Materials specified

Uses

• This field is used to add information about accompanying materials or to specify how many pieces the item has.

Effects on circulation

• This information will be displayed when circulation the item so that the circulation staff knows to make sure all the accompanying material is there when checkout out and it’s still there when checking the item back in.

  

Values

• This is a free text field, but it is possible to associate it to an authorized value category in the MARC framework to make it into a drop-down menu.

Display

• Staff interface

  • This information will appear when checking out or checking in an item

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_materials or otherholdings_materials

  • “Items” tab of the bibliographic record, “Materials specified” under “Item information”

• OPAC

  • Holdings table in the record’s detail page (it is hidden by default)

    Note

    Use “Table settings” if you want to show that column - Module: OPAC - Table id: holdingst - Column: item_materials

Mapped to: items.materials

Indexed in: materials-specified

952$4 - Damaged status

Uses

• This field is used to set the damaged status of the item.

• In the search results, the damaged item will be marked as unavailable.

Effects on circulation

• The damaged status does not affect the ability to check out or check in an item.

• The AllowHoldsOnDamagedItems system preference indicates whether or not damaged items can be put on hold.

Values

• The damaged status is numerical, “0” (or empty) means “not damaged” and any other number means “damaged”.

• By default, the field is associated with the DAMAGED authorized value category so you don’t have to remember the numerical values. The default values in the DAMAGED authorized value category are:

  • 1: Damaged

Display

• Staff interface

  • Search results (damaged items will be marked as unavailable)

  • Holdings table in the record’s detail page

  • “Items” tab of the bibliographic record, “Damaged status” under “Statuses”

• OPAC

  • Search results (damaged items will be marked as unavailable)

  • Holdings table in the record’s detail page

  • To hide damaged items from the OPAC, use the OpacHiddenItems system preference.

Mapped to: items.damaged

Indexed in: damaged

952$5 - Use restrictions

Uses

• This field is used to set the restricted status of the item.

• In the search results, the restricted item will be marked as available.

Effects on circulation

• A restricted item will not be able to be checked out.

Values

• The restricted status is numerical, “1” means restricted and “0” (or empty) means unrestricted.

Note

Unlike other statuses, the restricted status can only be 0 (not restricted) or 1 (restricted).

• By default, the field is associated with the RESTRICTED authorized value category so you don’t have to remember the numerical values. The default values in the RESTRICTED authorized value category are:

  • 1: Access Restricted

Display

• Staff interface

  • Search results (restricted items will be marked as available)

  • Holdings table in the record’s detail page

• OPAC

  • Search results (restricted items will be marked as available)

  • Holdings table in the record’s detail page

Mapped to: items.restricted

Indexed in: restricted

952$6 - Koha normalized classification for sorting

Avertissement

This field should not be editable nor edited manually.

Uses

• This field contains the normalized call number used for sorting, based on the item-level call number (952$o) and the classification source (952$2).

Display

• This information is not displayed anywhere in the OPAC or in the staff interface, it is for Koha’s internal use only.

Mapped to: items.cn_sort

Indexed in: cn-sort

952$7 - Not for loan status

Uses

• This field is used to set the not for loan status of the item.

• In the search results, the not for loan item will be marked as unavailable or for reference use only (see Reference_NFL_Statuses)

Effects on circulation

• Items with a not for loan status cannot be checked out (unless AllowNotForLoanOverride allows it)

• Depending on the value, items may or may not be put on hold (see below)

• Depending on TrapHoldsOnOrder and SkipHoldTrapOnNotForLoanValue not for loan items may be used to fill holds

• The UpdateNotForLoanStatusOnCheckin system preference can be used to automatically change not for loan values upon checkin

Values

• The not for loan status is numerical, “0” (or empty) means available.

• Negative values (< 0) mean that the item cannot be checked out, but can be put on hold.

• Positive values (> 0) mean that the item cannot be checked out nor be put on hold.

• By default, the field is associated with the NOT_LOAN authorized value category so you don’t have to remember the numerical values. The default values in the NOT_LOAN authorized value category are:

  • -1: Ordered

  • 1: Not For Loan

  • 2: Staff Collection

Display

• Staff interface

  • Search results (not for loan item will be marked as unavailable or for reference use only (see Reference_NFL_Statuses))

  • Holdings table in the record’s detail page

  • “Items” tab of the bibliographic record, “Withdrawn status” under “Statuses”

• OPAC

  • Search results (not for loan item will be marked as unavailable or for reference use only (see Reference_NFL_Statuses))

  • Holdings table in the record’s detail page

  • To hide not for loan items from the OPAC, use the OpacHiddenItems system preference.

Mapped to: items.notforloan

Indexed in: notforloan

952$8 - Collection

Uses

• This field is used to set the collection of the item.

• Collections in Koha are used to group items in ways other than physically (the physical location can be stored in 952$c). An example of a collection could be “Local authors”.

• Collections can also be used to limit transfers in multi-branch systems (see the Library transfer limits section of the administration) if BranchTransferLimitsType is set to “collection code”

• The collection of an item is used in the search (see the AdvancedSearchTypes system preference) as well as the facets.

Values

• By default, the field is associated with the CCODE authorized value category. The default values in the CCODE authorized value category are:

  • FIC: Fiction

  • NFIC: Non-fiction

  • REF: Reference

Display

• Staff interface

  • Search results

  • The collections will be part of the facets in the search results

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_ccode or otherholdings_ccode

  • Checkouts table in the patron’s file

    Note

    Use “Table settings” if you want to hide that column - Module: Circulation and Patrons - Table id: issues-table - Column: collection

  • Many other places all throughout Koha

• OPAC

  • Search results, if OpacItemLocation allows it

  • The collections will be part of the facets in the search results

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_ccode

  • Many other places throughout the OPAC

Mapped to: items.ccode

Indexed in: collection-code

952$9 - Itemnumber

Avertissement

This field should not be editable nor edited manually.

Uses

• The itemnumber is the internal number assigned to each item by Koha. It is unique and cannot be reattributed even when the item is deleted.

Display

• This information is not displayed anywhere in the OPAC or in the staff interface, it is for Koha’s internal use only.

Mapped to: items.itemnumber

Indexed in: itemnumber

952$a - Home library

Required

Uses

• This field indicates the home library of the item.

• The home library is important for many things in Koha, including, but not limited to

  • circulation rules,

  • transfer limits

• The home library of an item is used in the search as well as the facets (see the DisplayLibraryFacets system preference)

Effects on circulation

• As previously stated, the circulation rules are based on the item’s library (see the HomeOrHoldingBranch system preference)

Values

• Libraries are defined in the libraries section of the administration page.

Display

• Staff interface

  • Search results

  • Depending on the DisplayLibraryFacets system preference, the home library may be part of the facets in the search results

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_homebranch or otherholdings_homebranch

  • This information is displayed in the staff interface, in the “Items” tab of the bibliographic record, “Home library” under “Item information”

  • Checkouts table in the patron’s file

    Note

    Use “Table settings” if you want to hide that column - Module: Circulation and Patrons - Table id: issues-table - Column: homebranch

  • Many other places all throughout Koha

• OPAC

  • Search results (if OpacItemLocation allows it)

  • Depending on the DisplayLibraryFacets system preference, the home library may be part of the facets in the search results

  • Holdings table in the record’s detail page, if OpacLocationBranchToDisplay allows it

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_home_location

  • Many other places throughout the OPAC

Mapped to: items.homebranch

Indexed in: homelibrary

952$b - Current library

Required

Uses

• This field indicates the current library (holding library) of the item.

• The current library is important for many things in Koha, including

  • circulation rules,

  • transfer limits

• The current library of an item is used in the search as well as the facets (see the DisplayLibraryFacets system preference)

Effects on circulation

• As previously stated, the circulation rules are based on the item’s library (see the HomeOrHoldingBranch system preference)

Values

• Libraries are defined in the libraries section of the administration page.

Display

• Staff interface

  • Search results

  • Depending on the DisplayLibraryFacets system preference, the holding library may be part of the facets in the search results

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_holdingbranch or otherholdings_holdingbranch

  • This information is displayed in the staff interface, in the “Items” tab of the bibliographic record, “Current library” under “Item information”

  • Many other places all throughout Koha

• OPAC

  • Search results (if OpacItemLocation allows it)

  • Depending on the DisplayLibraryFacets system preference, the holding library may be part of the facets in the search results

  • Holdings table in the record’s detail page, if OpacLocationBranchToDisplay allows it

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_current_location

  • Many other places throughout the OPAC

Mapped to: items.holdingbranch

Indexed in: holdinglibrary

952$c - Shelving location

Uses

• This field indicates the location of the item (physical place in the library).

• Shelving locations in Koha are used to group items physically. An example of a shelving location could be “Children’s section”.

• The location of an item is used in the search (see the AdvancedSearchTypes system preference) as well as the facets.

• The UpdateItemLocationOnCheckin system preference can be used to automatically change location values upon checkin

Values

• By default, the field is associated with the LOC authorized value category. The default values in the LOC authorized value category are:

  • FIC: Fiction

  • CHLID: Children’s Area

  • DISPLAY: On Display

  • NEW: New Materials Shelf

  • STAFF: Staff Office

  • GEN: General Stacks

  • AV: Audio Visual

  • REF: Reference

  • CART: Book Cart

  • PROC: Processing Center

• The default value for new items can be set using the NewItemsDefaultLocation system preference

Display

• Staff interface

  • Search results

  • The locations will be part of the facets in the search results

  • Holdings table in the record’s detail page (under the home library)

  • This information is displayed in the staff interface, in the “Items” tab of the bibliographic record, “Home library” under “Item information”

  • Checkouts table in the patron’s file

    Note

    Use “Table settings” if you want to hide that column - Module: Circulation and Patrons - Table id: issues-table - Column: location

  • Many other places all throughout Koha

• OPAC

  • Search results (if OpacItemLocation allows it)

  • The locations will be part of the facets in the search results

  • Holdings table in the record’s detail page, the OpacLocationOnDetail system preference indicates in which column this information is located

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC

    • Table id: holdingst

    • Column: item_shelving_location (if OpacLocationOnDetail is set to “separate column”)

  • Many other places throughout the OPAC

Mapped to: items.location

Indexed in: location

952$d - Date acquired

Uses

• This field is used to enter the date of acquisition of the item.

• The acquisition date can be used in the search and the sort function in the search results

• When using the Acquisitions module, this should be filled automatically with the acquisition date

Values

• This should be a date in the YYYY-MM-DD format (there is a handy date picker to ensure the date is in the correct format)

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_dateaccessioned or otherholdings_dateaccessioned

  • “Items” tab of the bibliographic record, “Accession date” under “History”

Mapped to: items.dateaccessioned

Indexed in: date-of-acquisition

952$e - Source of acquisition

Uses

• This field is used to enter the vendor where the item was acquired

• When using the Acquisitions module, this should be filled automatically with the vendor upon receiving

Values

• This is a free text field

• If using the Acquisitions field, the value in this field will be the vendor id rather than the vendor’s name

Display

• This is not displayed either in the OPAC or in the staff interface. The information is only available in the item’s editing form.

Mapped to: items.booksellerid

Indexed in: acqsource

952$f - Coded location qualifier

Uses

• This field is used to enter a three-character code that identifies the specific issues of the item that are located apart from the main holdings of the same item (same as MARC21 852$f).

Values

• This is a free text field

• The field in the database is limited to 10 characters

Display

• This is not displayed either in the OPAC or in the staff interface. The information is only available in the item’s editing form.

Mapped to: items.coded_location_qualifier

Indexed in: coded-location-qualifier

952$g - Cost, normal purchase price

Uses

• This field is used to enter the purchase price of the item

• When using the Acquisitions module, this should be filled automatically with the purchase price upon receiving

Values

• This is a free text field

• The price must be digits, with a period as the decimal, with no currency symbols (e.g. 24.95)

• The field in the database limits to two decimal points (e.g. 24.95 is OK but 24.94875 is not)

Display

• This is not displayed either in the OPAC or in the staff interface. The information is only available in the item’s editing form.

Mapped to: items.price

Indexed in: price

952$h - Serial enumeration / chronology

Uses

• This field is used to enter the issue number of serials or the volume number of series

• When using the Serials module, this should be filled automatically with the issue number

Values

• This is a free text field

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_enumchron or otherholdings_enumchron

  • “Items” tab of the bibliographic record, “Serial enumeration” under “History”

• OPAC

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_enumchron

Mapped to: items.enumchron

952$i - Inventory number

Uses

• This field is used to enter an inventory number for the item

Note

The inventory number is not Koha’s internal itemnumber (which is stored in 952$9)

Values

• This is a free text field

• The field in the database is limited to 32 characters

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_stocknumber or otherholdings_stocknumber

Mapped to: items.stocknumber

Indexed in: number-local-acquisition

952$j - Shelving control number

Uses

• This field is used to enter a shelf number where the item is located

Values

• The stack number should be numerical

• By default, the field is associated with the STACK authorized value category so you don’t have to remember the numerical values. There are no default values.

Display

• This is not displayed either in the OPAC or in the staff interface. The information is only available in the item’s editing form.

Mapped to: items.stack

Indexed in: stack

952$l - Total checkouts

Avertissement

This field should not be editable nor edited manually.

Uses

• This field contains the total number of past and present issues/checkouts of this item

• The number of issues is used to sort search results by popularity

• The number of issues for each item is used to update the total number of issues for the record (942$0)

Display

• Staff interface

  • “Items” tab of the bibliographic record, “Total checkouts” under “History”

Mapped to: items.issues

Indexed in: issues

952$m - Total renewals

Avertissement

This field should not be editable nor edited manually.

Uses

• This field contains the total number of past renewals of this item

Display

• Staff interface

  • “Items” tab of the bibliographic record, “Current renewals” under “Statuses”

Mapped to: items.renewals

Indexed in: renewals

952$n - Total holds

Avertissement

This field should not be editable nor edited manually.

Uses

• This field contains the total number of past and present holds on this item

• The number of holds is used to create a RSS feed for most reserved items

Display

• This is not displayed either in the OPAC or in the staff interface.

Mapped to: items.renewals

Indexed in: renewals

952$o - Full call number

Uses

• This field is used to store the item’s call number

• The call number of an item can used in the search

Values

• The records call number can be copied into the item’s call number, the itemcallnumber system preference indicates which record field to use as the source

Display

• Staff interface

  • Search results

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_itemcallnumber or otherholdings_itemcallnumber

  • “Items” tab of the bibliographic record, “Item callnumber” under “Item information”

  • Checkouts table in the patron’s file

    Note

    Use “Table settings” if you want to hide that column - Module: Circulation and Patrons - Table id: issues-table - Column: callno

  • Many other places all throughout Koha

• OPAC

  • Search results, if OpacItemLocation allows it

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_callnumber

  • Checkouts table in the patron’s online account

  • Many other places throughout the OPAC

Mapped to: items.itemcallnumber

Indexed in: local-classification

952$p - Barcode

Required for circulation

Uses

• This field is used to store the item’s barcode

• The barcode of an item can used in the search

Effects on circulation

• The barcode is essential for circulating items

Values

• This should be a date in the YYYY-MM-DD format (there is a handy date picker to ensure the date is in the correct format)

• This is a free text field

• The field in the database is limited to 20 characters

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_barcode or otherholdings_barcode

  • “Items” tab of the bibliographic record

  • Checkouts table in the patron’s file (in the title column)

Mapped to: items.barcode

Indexed in: barcode

952$q - Date due

Avertissement

This field should not be editable nor edited manually.

Uses

• When the item is checked out, the due date is stored in this field (YYYY-MM-DD)

• This field is used in the “Limit to currently available items” in the facets

Display

• The due date appears in a lot of pages in the circulation module, but it is the due date that comes from the issues, not the item

Mapped to: items.onloan

Indexed in: onloan

952$r - Date last seen

Avertissement

This field should not be editable nor edited manually.

Uses

• When the item is checked out or in, edited, inventoried, or during any other transaction that affects the item, the date is stored in this field (YYYY-MM-DD)

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_lastseen or otherholdings_lastseen

  • “Items” tab of the bibliographic record, “Last seen” under “History”

Mapped to: items.datelastseen

Indexed in: datelastseen

952$s - Date last checked out

Avertissement

This field should not be editable nor edited manually.

Uses

• When the item is checked out, the date is stored in this field (YYYY-MM-DD)

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_datelastborrowed or otherholdings_datelastborrowed

  • “Items” tab of the bibliographic record, “Last borrowed” under “History”

Mapped to: items.datelastborrowed

Indexed in: datelastborrowed

952$t - Copy number

Uses

• This field is used to enter the copy number of the item

Values

• This is a free text field

• The field in the database is limited to 32 characters

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_copynumber or otherholdings_copynumber

  • “Items” tab of the bibliographic record, “Copy number” under “History”

• OPAC

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_copy

Mapped to: items.copynumber

Indexed in: copynumber

952$u - URI

Uses

• This field is used to enter a URL or URN specific to the item

• It is not necessary to enter a URL here if there is already a URL in 856$u at the record-level, unless the URL for the specific item differs from the one in 856$u (for example, if you have an online periodical, you can put the URL to the periodical in 856$u and the URL to the specific issue in 952$u)

Values

• It should be a full URL starting with http:// or https://

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_uri or otherholdings_uri

• OPAC

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_url

Mapped to: items.uri

Indexed in: uri

952$v - Cost, replacement price

Uses

• This field is used to enter the replacement cost that will be charged to the patron who loses the item

• When using the Acquisitions module, this should be filled automatically with the replacement price upon receiving

Values

• This is a free text field

• The price must be digits, with a period as the decimal, with no currency symbols (e.g. 24.95)

• The field in the database limits to two decimal points (e.g. 24.95 is OK but 24.94875 is not)

Display

• Staff interface

  • Checkouts table in the patron’s file (in the price column)

    Note

    Use “Table settings” if you want to hide that column - Module: Circulation and Patrons - Table id: issues-table - Column: price

  • “Items” tab of the bibliographic record, “Replacement price” under “Item information”

Mapped to: items.replacementprice

Indexed in: replacementprice

952$w - Price effective from

Uses

• This field is used to enter the date of the replacement price of the item

• When using the Acquisitions module, this should be filled automatically with the acquisition date upon receiving

• If left empty, it will default to the acquisition date (952$d)

Values

• This should be a date in the YYYY-MM-DD format

Display

• This is not displayed either in the OPAC or in the staff interface. The information is only available in the item’s editing form.

Mapped to: items.replacementpricedate

Indexed in: replacementpricedate

952$x - Non-public note

Uses

• This field is used to enter internal notes about the item

Values

• This is a free text field

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue

    • Table id: holdings_table and/or otherholdings_table

    • Column: holdings_itemnotes_nonpublic or otherholdings_itemnotes_nonpublic

  • “Items” tab of the bibliographic record, “Non-public note” under “History”

Mapped to: items.itemnotes_nonpublic

952$y - Koha item type

Required

Uses

• This field contains the item-level item type.

• The item-level item type is used in various places in Koha.

  • The item-level item type is generally used for the circulation rules unless the item-level_itypes system preference is set to use the record-level item type (this system preference lets you choose between using the record-level or item-level item type for the circulation rules, among other things)

  • The item-level item type is indexed and used in the search (see also the AdvancedSearchTypes system preference) as well as the facets

Effects on circulation

• The item type is used as the basis for circulation rules, it will affect the number of items a patron can take out at the same time, number of holds, etc.)

Values

• The values are managed in item types

Display

• Staff interface

  • Search results

  • The itemtypes will be part of the facets in the search results

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_itype or otherholdings_itype

  • “Items” tab of the bibliographic record, “Item type” under “Item information”

  • Checkouts table in the patron’s file

    Note

    Use “Table settings” if you want to hide that column - Module: Circulation and Patrons - Table id: issues-table - Column: item_type

  • Many other places all throughout Koha

• OPAC

  • The item types will be part of the facets in the search results

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_itemtype

  • Many other places throughout the OPAC

Mapped to: items.itype

Indexed in: itemtype (mc-itemtype), itype (mc-itype)

952$z - Public note

Uses

• This field is used to enter notes about the item

Values

• This is a free text field

Display

• Staff interface

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: Catalogue - Table id: holdings_table and/or otherholdings_table - Column: holdings_itemnotes or otherholdings_itemnotes

  • “Items” tab of the bibliographic record, “Public note” under “History”

• OPAC

  • Holdings table in the record’s detail page

    Note

    Use “Table settings” if you want to hide that column - Module: OPAC - Table id: holdingst - Column: item_notes

Mapped to: items.itemnotes

Indexed in: note

System control numbers (999)

Koha stores its system control numbers in the 999 field in MARC21 and in the 090 field in UNIMARC.

Note

The itemnumber is stored in 952$9 (see above).

999$c - Biblionumber

The biblionumber is the internal number assigned to each record by Koha. It is unique and cannot be reattributed even when the record is deleted.

Mapped to: biblio.biblionumber

Indexed in: local-number (sn, biblionumber)

Avertissement

This field should not be editable nor edited manually.

Note

In UNIMARC, the biblionumber is stored in the 090$9 subfield.

999$d - Biblioitemnumber

The biblioitemnumber is the internal number assigned to each record by Koha. It is unique and cannot be reattributed even when the record is deleted.

Mapped to: biblioitems.biblioitemnumber

Indexed in: biblioitemnumber

Avertissement

This field should not be editable nor edited manually.

Note

In UNIMARC, the biblioitemnumber is stored in the 090$a subfield.

Koha XSLT material type icons

When you have any of the XSLT system preferences (OPACXSLTDetailsDisplay, OPACXSLTResultsDisplay, XSLTDetailsDisplay, and/or XSLTResultsDisplay) along with the DisplayOPACiconsXSLT and DisplayIconsXSLT preferences turned on you will see material type icons on the related screen.

Important

These images are coming from values found in your leader, if your leader is not cataloged properly it might be best to turn off the DisplayOPACiconsXSLT preference (which can be done while leaving the other XSLT preferences turned on).

• Livre [BK]

  • leader6 = a (et une des valeurs de leader7 plus basse)

    • leader7 = a

    • leader7 = c

    • leader7 = d

    • leader7 = m

  • leader6 = t

• Fichier informatique [CF]

  • leader6 = m

• Ressource continue [CR]

  • leader7 = b

  • leader7 = i

  • leader7 = s

• Map [MP]

  • leader6 = e

  • leader6 = f

• Divers [MX]

  • leader6 = p

• Son [MU]

  • leader6 = c

  • leader6 = d

  • leader6 = i

  • leader6 = j

• Matériel visuel [VM]

  • leader6 = g

  • leader6 = k

  • leader6 = r

• Kit

  • leader6 = o

Gestion des commandes d’exemplaires et réservations

If you tend to import your MARC records when you have ordered the book (as opposed to when you receive the books), and allow patrons to place holds on those books, you may need to add item records to the *.mrc file before importing.

The easiest way to import your latest order is to first run your records through MARCEdit. Download your MARC records, saving them to your desktop or some other location you use/will remember. If you have MARCEdit already installed you should simply have to double click on your MARC records, and they will automatically open in MARCEdit.

Important

Ce tutoriel a été rédigé avec la version MARCEdit 5.2.3769.41641 sur Windows XP, les instructions peuvent donc varier si votre version ou système d’exploitation est différent.

• Votre fichier original s’affichera automatiquement en tant que donnée; assurez-vous d’avoir sélectionné MarcBreaker, puis cliquez sur “Exécuter”.

  

• Un résumé des notices s’affichera en bas de l’écran

  

• Cliquez sur “Modifier les notices” pour continuer d’ajouter des notices d’exemplaires

• Votre écran sera alors remplacé par un écran plus large contenant les notices MARC

  

• Click on Tools > Add/Edit Field

  

• Saisissez les informations de l’exemplaire spécifique dans Koha

  

  • Dans la barre du champ, tapez 942

  • In the Field Data box, type \\$c and the item type code (\\$cBOOK in this example)

  • Cochez l’option “Insérez en dernier” (Insert last)

  • Cliquez sur “Ajouter un champ”

• Saisissez les données de la notice d’exemplaire

  

  • Dans la barre de champ, tapez 952

  • In the Field Data box, type $7ORDERED_STATUS$aPERM_LOC$bCURR_LOC$cSHELVING_LOCATION$eSOURCE_OF_ACQ$yITEM_TYPE

    • ex. $7-1$aCPL$bCPL$cNEW$eBrodart$yBOOK

      • Dans l’installation par défaut de Koha, -1 est la valeur pour le statut “commandé”

    • Vous pourrez regarder les autres sous-champs pour lesquels vous souhaitez qu’il y ait les données dedans, par exemple, changer le code de collection pour mettre tous les exemplaires dans la même collection (8), remplit automatiquement la date d’acquisition (d), ou une note publique (z).

    • Assurez-vous d’utiliser le $ pour séparer les sous-champs. L’ajout de chaque sous-champ sur une ligne séparée fera que plusieurs exemplaires seront importés avec vos notices MARC (dans l’exemple au-dessus, quatre exemplaires, chacun avec un de ces sous-champs rectifiés)

    • Make sure you look at the Administration > Authorized Values in Koha to put the correct code into the field

  • Cochez l’option “Insérez en dernier” (Insert last)

  • Cliquez sur “Ajouter un champ”

• Fermez la fenêtre de l’éditeur du champ

• Click on File > Compile into MARC

  

• Choisissez l’emplacement où sauvegarder votre fichier

Now you want to go into your Koha system and follow the instructions for importing MARC records.

Une fois que l’exemplaire a été saisi, vous devrez aller sur la notice d’exemplaire et changer individuellement l’exemplaire pour avoir le code à barres correct et changer le statut de “Commandé” en “Exclu du prêt”.

Note

Si vous choisissez d’acheter vos notices d’exemplaires cataloguées, vous devrez demander à votre fournisseur de mettre les informations nécessaires dans vos notices MARC; ceci fait, vous pourrez importer le fichier édité par le fournisseur, et écraser la notice actuelle, qui sera automatiquement remplacée par les données dont vous avez besoin.