Výpůjčky

Get there: More > Administration > System preferences > Circulation

Article requests

ArticleRequests

Asks: ___ patrons to place article requests.

Výchozí: Neumožnit

Hodnoty:

• Neumožnit

• Umožnit

Popis:

• This preference controls whether or not patrons can request articles.

• This is the main switch for the article request functionality.

ArticleRequestsLinkControl

Asks: ___ article request link on search results.

Default: Use algorithm to show or hide

Hodnoty:

• Always show

• Use algorithm to show or hide

Popis:

• On the OPAC results page, either always show the ‚Request article‘ link or check the branch, patron and item type combination to determine whether or not an article can be requested from this particular record before displaying the link.

ArticleRequestsMandatoryFields

Asks: For records that are record level or item level requestable, make the following fields mandatory: ___

Default: None selected

Hodnoty:

• [Označit vše]

• Autor

• Kapitoly

• Datum

• Vydání

• Stránky

• Název

• Svazek

Popis:

• This preference controls what fields must be filled in before an article request can be placed for either a record level or item level request. Choosing [Select all] indicates that all fields listed (Author, Chapters, Date, Issue, Pages, Title, Volume) must be completed before the article request can be placed.

ArticleRequestsMandatoryFieldsItemsOnly

Asks: For records that are only item level requestable, make the following fields mandatory: ___

Default: None selected

Hodnoty:

• [Označit vše]

• Autor

• Kapitoly

• Datum

• Vydání

• Stránky

• Název

• Svazek

Popis:

• This preference controls what fields must be filled in before an article request can be placed for an item level request only. Choosing [Select all] indicates that all fields listed (Author, Chapters, Date, Issue, Pages, Title, Volume) must be completed before the article request can be placed.

ArticleRequestsMandatoryFieldsRecordOnly

Asks: For records that are only record level requestable, make the following fields mandatory: ___

Default: None selected

Hodnoty:

• [Označit vše]

• Autor

• Kapitoly

• Datum

• Vydání

• Stránky

• Název

• Svazek

Popis:

• This preference controls what fields must be filled in before an article request can be placed for a record level request only. Choosing [Select all] indicates that all fields listed (Author, Chapters, Date, Issue, Pages, Title, Volume) must be completed before the article request can be placed.

ArticleRequestsOpacHostRedirection

Asks: ___ redirection from child to host based on MARC21 773$w when the child has no items when requesting articles on the OPAC.

Výchozí: Nepovolit

Hodnoty:

• Vypnout

• Umožnit

Popis:

• When enabled, if a patron attempts to place an article request from an analytic record the system will automatically populate some details in the request from using data from the host record.

ArticleRequestsSupportedFormats

Asks: The following article request formats are supported: ___

Default: PHOTOCOPY

Values: Valid choices are currently PHOTOCOPY and SCAN

Popis:

• This system preference controls the choices available in the ‚Format‘ drop- down menu when placing an article request.

• The valid choices are PHOTOCOPY and SCAN.

• Separate choices with a pipe (|), for example PHOTOCOPY|SCAN

• The first choice in the list will be the default choice in the article request form.

Batch checkout

BatchCheckouts

Asks: ___ batch checkouts

Výchozí: Nepovolit

Hodnoty:

• Povolit

• Zakázat

Popis:

• This system preference is the main switch for the batch checkout functionality

• Make sure to add the patron categories allowed to have batch checkouts in BatchCheckoutsValidCategories

See also:

• BatchCheckoutsValidCategories

• SCOBatchCheckoutsValidCategories

BatchCheckoutsValidCategories

Asks: Patron categories allowed to checkout in a batch: ___

Hodnoty:

• Values are the patron categories; multiple categories can be selected.

Default: none

Popis:

• Check the patron categories for which batch checkouts are allowed

• BatchCheckouts must be enabled for this preference to have any effect

See also:

• BatchCheckouts

• SCOBatchCheckoutsValidCategories

Checkin policy

AutomaticConfirmTransfer

Asks: ___ automatically confirm a transfer when the modal is dismissed without clicking ‚Yes‘.

Výchozí: Ne

Hodnoty:

• Ne

• Ano

Popis:

• This system preference is used to control the transfer behavior when a staff member clicks away from the transfer confirmation pop-up.

• When set to „Don’t“, clicking away from the pop-up will leave the item as is.

• When set to „Do“, clicking away from the pop-up will confirm the transfer and put the item in transit.

• It is only possible to click away from the pop-up if the TransfersBlockCirc system preference is set to „Don’t block“.

BlockReturnOfLostItems

Asks: ___ returning of items that have been lost.

Default: Don’t block

Hodnoty:

• Blokovat

• Neblokovat

Popis:

• This preference controls whether and item with a lost status (952$1 in MARC21) can be checked in or not.

BlockReturnOfWithdrawnItems

Asks: ___ returning of items that have been withdrawn.

Výchozí: Blokovat

Hodnoty:

• Blokovat

• Neblokovat

Popis:

• Toto nastavení určuje, zda jednotka se statusem „vyřazená“ (952$0 v MARC21) může být zapůjčena či ne.

CalculateFinesOnBackdate

Asks: ___ calculate and update overdue charges when an item is returned with a backdated return date.

Výchozí: Ano

Hodnoty:

• Ano

• Ne

Popis:

• This system preference is similar to CalculateFinesOnReturn but is used when checkins are backdated either through the book drop mode or the specified return date (see SpecifyReturnDate).

Počítej pokuty při návratu

Asks: ___ calculate and update overdue charges when an item is returned.

Výchozí: Ano

Hodnoty:

• Ano

• Ne

Popis:

• If this preference is set to „Do“ and the fines cron job is off then Koha will calculate fines only when items are returned. If you have the fines cron job on and this preference set to „Do“ then this preference will calculate fines based on the cron (usually run nightly) and then again when you check the item in. This option is best for those who are doing hourly loans. If this preference is set to „Don’t“ then fines will only be accrued if the fines cron job is running.

Varování

If you are doing hourly loans, this should be set to ‚Do‘.

Varování

The finesMode system preference must be set to ‚Calculate and charge‘ in order for this system preference to have any effect.

HidePersonalPatronDetailOnCirculation

Asks: ___ hide patrons phone number, email address, street address and city in the circulation page

Výchozí: Ne

Hodnoty:

• Ne

• Ano

Popis:

• This preference controls the display of the patron’s phone number, email address, and physical address from the left side of the screen (under their picture, if they have one) on the circulation page.

• When set to ‚Do‘, this information will only be visible on the patron’s detail page.

HoldsAutoFill

Asks: ___ automatically fill holds instead of asking the librarian.

Výchozí: Ne

Hodnoty:

• Ano

• Ne

Popis:

• If set to ‚Do‘, the holds confirmation pop-up will not appear upon checking in an item placed on hold.

HoldsAutoFillPrintSlip

Asks: ___ automatically display the holds slip dialog for auto-filled holds.

Výchozí: Ne

Hodnoty:

• Ano

• Ne

Popis:

• If set to ‚Do‘, the holds slip print pop-up will appear automatically upon checking in an item placed on hold.

• HoldsAutoFill must be set to ‚do‘ for this preference to have any effect.

HoldsNeedProcessingSIP

Asks: ___ holds automatically if matching item is returned via SIP protocol.

Default: Fulfill

Hodnoty:

• Fulfill

• Don’t fulfill

Popis:

• This system preference controls whether or not holds are automatically filled by items returned via SIP (sorter, auto check-in stations, etc.)

SkipHoldTrapOnNotForLoanValue

Asks: Never trap items with ‚not for loan‘ values of ___ to fill holds.

Popis:

• This system preference is used to completely exclude items with ‚not for loan‘ values from filling holds.

• Enter NOT_LOAN authorized values separated by pipes (|).

StoreLastBorrower

Asks: ___ the last patron to return an item.

Default: Don’t store

Hodnoty:

• Don’t store

• Store

Popis:

• This preference allows you to store the last patron to borrow an item even if the patron has chosen to have their reading history anonymized.

Poznámka

This setting is independent of opacreadinghistory and AnonymousPatron.

TransfersBlockCirc

Asks: ___ staff from continuing to checkin items when a transfer is triggered.

Výchozí: Blokovat

Hodnoty:

• Neblokovat

• Blokovat

Popis:

• This system preference controls whether or not the transfer pop-up blocks further checkins.

• If this is set to „Don’t block“, the AutomaticConfirmTransfer system preference determines what happens if the pop-up is dismissed without confirming the transfer.

TrapHoldsOnOrder

Asks: ___ items that are not for loan but holdable (notforlan < 0) to fill holds.

Default: Trap

Hodnoty:

• Don’t trap

• Trap

Popis:

• This system preference controls whether or not items that have a NOT_LOAN authorized value smaller than 0 (which means that the item can be put on hold, but not checked out), should be used to fill holds.

UpdateItemLocationOnCheckin

Asks: This is a list of value pairs. The first value is followed immediately by colon, space, then the second value.

Popis:

• This system preference affects the item’s current and permanent locations when the item is checked in (whether it was checked out or not).

• If the location value on the left of the colon (:) matches the item’s current location, it will be updated to match the location value on the right of the colon (:).

• The values are the LOC authorized values.

• For example, STAFF: GEN will move an item from the staff office to the general collection when the item is checked in.

• Special terms

  • PROC: Processing center. When using PROC, only the current location will be affected.

  • CART: Shelving cart. When using CART, only the current location will be affected.

  • _PERM_: This will use the item’s permanent location, whatever that location is.

  • _BLANK_: Used on the left as a first value, it will add a location if there is none. Used on the right as a second value, it will remove the location.

  • _ALL_: Used on the left as a first value, it will affect all items and override all other rules.

Varování

Requires YAML syntax to work

This means

• Make sure there is NO space between the first value and the colon

• Make sure there IS a space between the colon and the second value

• Make sure each pair is on its own line

• If using PROC or CART, use the cart_to_shelf cron job to return the items to their permanent location after a determined number of hours.

UpdateNotForLoanStatusOnCheckin

Version

The system preference was expanded in version 23.11 of Koha to include item types. In previous versions, only use not for loan value pairs.

Asks: This is a list of item types and value pairs. When an item is checked in, if it’s item type matches, and if the value on the left matches the item’s not for loan value it will be updated to the value on the right.

Popis:

• This system preference affects the item’s ‚not for loan‘ status when the item is checked in (whether it was checked out or not).

• For each item type, there can be multiple not for loan status pairs.

• If the status value on the left of the colon (:) matches the item’s current status, it will be updated to match the status value on the right of the colon (:).

• The values are the NOT_LOAN authorized values.

• The item type codes are from the item types.

• For example, ‚-1: 0‘ will cause an item that was set to ‚Ordered‘ to now be available for loan

• The _ALL_ code can be used in place of an item type code to apply to all item types. This will not override other rules, if any are defined for specific item types.

• This system preference can also be used to only display the not for loan status. To do so, enter ONLYMESSAGE on the right of the colon.

Example:

_ALL_:
 -1: 0

CR:
 1: 0

BK:
 -1: ONLYMESSAGE

• For all item types, except BK, a value of -1 will be changed to 0.

• For CR item type, a value of 1 will be changed to 0.

• For BK item type, a value of -1 will show the description of the -1 not for loan status, without changing it.

Varování

Requires YAML syntax to work

This means

• The item type code should be followed by a colon

• Make sure all not for loan value pairs for an item type are preceded by a space

• Make sure there is NO space between the first value and the colon

• Make sure there IS a space between the colon and the second value

• Make sure each pair is on its own line

Checkout policy

AgeRestrictionMarker

Asks: Restrict patrons with the following target audience values from checking out inappropriate materials: ___

Popis:

• This preference defines certain keywords that will trigger Koha to restrict checkout based on age. These restrictions can be overridden by the AgeRestrictionOverride preference. Enter in this field a series of keywords separated by bar (|) with no spaces. For example PG|R|E|EC|Age| will look for PG followed by an age number, R followed by an age number, Age followed by an age number, and so on. These values can appear in any MARC field, but Library of Congress recommends the 521$a (Target Audience Note). Whatever field you decide to use you must map the word agerestriction in the biblioitems table to that field in the Koha to MARC Mapping. When cataloging you can enter values like PG 13 or E 10 in the 521$a and Koha will then notify circulation librarians that the material may not be recommended for the patron based on their age.

  Důležité

  You must map the word agerestriction in the biblioitems table to the MARC field where this information will appear via the Koha to MARC Mapping administration area.

AgeRestrictionOverride

Výchozí: Nepovolit

Asks: ___ staff to check out an item with age restriction.

Hodnoty:

• Povolit

  

• Zakázat

  

Popis:

• When the AgeRestrictionMarker preference is set, Koha will try to warn circulation librarians before checking out an item that might have an age restriction listed in the MARC record. This preference asks if you would like the staff to be able to still check out these items to patrons under the age limit.

AllFinesNeedOverride

Výchozí: Požadovat

Asks: ___ staff to manually override all fines, even fines less than noissuescharge.

Hodnoty:

• Nepožadovat

• Požadovat

Popis:

• Tato vám ponechá možnost rozhodnout se, zda chcete být vždy varováni, že čtenář má nevyrovnané pokuty při půjčování. Máte-li nastaveno na „Vyžadovat“, pak bez ohledu na to, kolik peněz čtenář dluží vyskočí varování, že čtenář dluží peníze.

AllowFineOverride

Výchozí: Nepovolit

Asks: ___ staff to manually override and check out items to patrons who have more than noissuescharge in fines.

Hodnoty:

• Povolit

• Zakázat

Popis:

• Tato předvolba vám dává možnost rozhodnout, zda knihovníci mohou půjčovat i čtenářům, kteří dluží více peněz, než si obvykle necháváte na jejich účtu. Pokud je nastaveno na „Povolit“ knihovníci budou varováni, že čtenáři dluží peníze, ale to nezabraňuje ve výpůjčce na čtenáře.

AllowItemsOnHoldCheckoutSCO

Výchozí: Nepovolit

Asks: ___ checkouts of items reserved to someone else in the SCO module. If allowed do not generate RESERVE_WAITING and RESERVED warning. This allows self checkouts for those items.

Hodnoty:

• Povolit

• Zakázat

  Důležité

  This system preference relates only to Koha’s web based self checkout.

Popis:

• When this preference is set to ‚Allow‘ patrons will be able to use Koha’s web based self checkout to check out a book to themselves even if it’s on hold for someone else. If you would like Koha to prevent people from checking out books that are on hold for someone else set this preference to „Don’t allow“.

AllowItemsOnHoldCheckoutSIP

Asks: ___ checkouts of items reserved to someone else via SIP checkout messages.

Výchozí: Nepovolit

Hodnoty:

• Povolit

• Zakázat

  Důležité

  This system preference relates only to SIP-based self-checkout, not Koha’s web based self checkout.

Popis:

• When this preference is set to ‚Allow‘ patrons will be able to use your external self check machine to check out a book to themselves even if it’s on hold for someone else.

• If you would like Koha to prevent people from checking out books that are on hold for someone else set this preference to ‚Don’t allow‘.

Povolit

Výchozí: Povolit

Asks: ___ patrons to check out multiple items from the same record.

Hodnoty:

• Povolit

• Zakázat

Popis:

• If this preference is set to ‚Allow‘ then patrons will be able to check out multiple copies of the same title at the same time. If it’s set to „Don’t allow“ then patrons will only be allowed to check out one item attached to a record at a time. Regardless of the option chosen in this preference records with subscriptions attached will allow multiple check outs.

  Důležité

  This will only effect records without a subscription attached.

AllowNotForLoanOverride

Výchozí: Povolit

Asks: ___ staff to override and check out items that are marked as not for loan.

Hodnoty:

• Povolit

• Zakázat

Popis:

• This parameter is a binary setting which controls the ability of staff (patrons will always be prevented from checking these items out) to check out items that are marked as „not for loan“. Setting it to „Allow“ would allow such items to be checked out, setting it to „Don’t allow“ would prevent this. This setting determines whether items meant to stay in the library, such as reference materials, and other library resources can be checked out by patrons.

AllowRenewalLimitOverride

Výchozí: Povolit

Asks: ___ staff to manually override the renewal limit and renew a checkout when it would go over the renewal limit.

Hodnoty:

• Povolit

• Zakázat

Popis:

• This preference is a binary setting which controls the ability of staff to override the limits placed on the number of times an item can be renewed. Setting it to „Allow“ would allow such limits to be overridden, setting it to „Don’t allow“ would prevent this. This is a preference in which if it is set to „allow“ it would allow the library staff to use their judgment for overriding the renew limit for special cases, setting it to „Don’t allow“ prevents an opportunity for abuse by the library staff.

AllowRenewalOnHoldOverride

Asks: ___ staff to renew items that are on hold by manually specifying a due date.

Výchozí: Nepovolit

Hodnoty:

• Povolit

• Zakázat

Popis:

• This preference enables items that are on hold to be renewed with a due date specified by the user.

  It can appear in two locations:

  1. In the „Checkouts“ table on the Patron Details screen. It is possible to select on loan items that would otherwise fulfill a hold request to be renewed. When such an item is selected, an additional date selection box is displayed to allow the user to specify the due date for all on hold items that are to be renewed.

  2. In the Circulation > Renew alert screen. When a barcode of an on loan item that would ordinarily fulfill a hold request is entered, the usual alert is displayed indicating that the item is on hold, it is still possible to override this, and renew. With this preference enabled it is also possible to specify a due date.

AllowReturnToBranch

Výchozí: do jakékoliv knihovny

Asks: Allow materials to be returned to ___

Hodnoty:

• buď do knihovny, odkud materiál pochází anebo do knihovny kde byl vypůjčen.

• jen do knihovny odkud je materiál.

• jen do knihovny, odkud byl materiál vypůjčen.

• do jakékoliv knihovny.

Popis:

• Tato předvolba umožňuje knihovnímu systému rozhodnout, jak bude přijímat vrácené knihy. Některé systémy umožňují vracet v kterékoliv knihovně zúčastněné v systému, (výchozí hodnota tohoto nastavení), ostatní knihovny chtějí omezit vracené knih pouze na konkrétní pobočce. Tato předvolba vám umožní omezit vracení v pobočkách, které stanovíte.

AllowNotForLoanOverride

Výchozí: Povolit

Asks: ___ staff to override and check out items when the patron has reached the maximum number of allowed checkouts.

Hodnoty:

• Povolit

  

• Zakázat

  

Popis:

• If this preference is set to „Allow“ then staff all will be presented with an option to checkout more items to a patron than are normally allowed in the circulation and fines rules. If this preference is set to „Don’t allow“ then no staff member will be able to check out more than the circulation limit.

AutomaticItemReturn

Výchozí: Ano

Asks: ___ automatically transfer items to their home branch when they are returned.

Hodnoty:

• Ano

• Ne

Popis:

• This preference is a binary setting which determines whether an item is returned to its home branch automatically or not. If set to „Don’t“, the staff member checking an item in at a location other than the item’s home branch will be asked whether the item will remain at the non-home branch (in which case the new location will be marked as a holding location) or returned. Setting it to „Do“ will ensure that items checked in at a branch other than their home branch will be sent to that home branch.

AutoReturnCheckedOutItems

požadovat od knihovníků ruční potvrzení zápůjčky, pokud je položka již zapůjčena někomu jinému.

Hodnoty:

• Ano

• Ne

Výchozí: Ano

Popis:

• This preference controls whether Koha asks for a confirmation when trying to check out an item that is already checked out to another patron.

• Set to ‚Do‘, Koha will ask the staff member to confirm the check out.

  

• Set to ‚Don’t‘, Koha will simply return the item from the previous patron’s file and check it out to the actual patron and show a message.

  

CircControl

Výchozí: knihovna, z které kniha pochází

Asks: Use the checkout and fines rules of ___

Hodnoty:

• knihovna, z které kniha pochází

  • The circulation and fines policies will be determined by the item’s library where HomeOrHoldingBranch chooses if item’s home library is used or holding library is used.

• knihovna, z které je čtenář

  • The circulation and fines policies will be determined the patron’s home library

• knihovna, ke které jste připojeni

  • The circulation and fines policies will be determined by the library that checked the item out to the patron

CircControlReturnsBranch

Asks: To determine whether an item is transferred or remains in the library after checkin, use the circulation rules of ___.

Default: the library the item is owned by (homebranch)

Hodnoty:

• the library the item is checked in at (checkin library)

• the library the item is currently held by (holdingbranch)

• the library the item is owned by (homebranch)

Popis:

• This system preference controls which return policy rule (item returns home, item returns to issuing library, or item floats) is used when checking in items.

ConsiderLibraryHoursInCirculation

Version

This system preference was added to Koha in version 24.05.

Asks: When checking out an hourly loan that will be due after the library closes, ___

Default: shorten the loan period and set the checkout to be due at the library’s close time.

Hodnoty:

• shorten the loan period and set the checkout to be due at the library’s close time.

• do not consider the library’s opening hours.

• extend the loan period and set the checkout to be due at the library’s open time.

Popis:

• This system preference determines the fate of an hourly checkout which would be due after the library’s opening hours.

• Set the library’s opening hours in Administration > Libraries.

ConsiderOnSiteCheckoutsAsNormalCheckouts

Asks: ___ on-site checkouts as normal checkouts. If enabled, on-site checkouts will count toward the checkout limit for regular checkouts. The on-site limit will still apply for on-site checkouts. If disabled, both values will be checked separately.

Default: Consider

Hodnoty:

• Consider

• Don’t consider

Popis:

• This preference allows you to decide if checkouts that are considered on-site checkouts are counted toward the total checkouts a patron can have. You can also set your circulation and fines rules to allow only a certain number of normal and on-site checkouts.

DefaultLongOverduePatronCategories

Version

This system preference was added in Koha version 24.05.

Asks: Set the default patron categories to receive overdues to ___

Hodnoty:

• Values are the patron categories; multiple categories can be selected.

• Default: none

Popis:

Důležité

This system preference will only be active if DefaultLongOverdueSkipPatronCategories is empty.

• This system preference is used to limit the automatic long overdue process (enabled by the DefaultLongOverdueLostValue and DefaultLongOverdueDays system preferences) to specific patron categories.

  • For example, you might want to only process long overdues automatically for students but not anybody else.

• If this field is empty, all patron categories will be subject to the long overdue process.

• This system preference is used when the longoverdue cron job is called without the --category parameter.

• This system preference allows libraries to set the values of the longoverdue cron job without having to edit the crontab.

DefaultLongOverdueSkipPatronCategories

Version

This system preference was added in Koha version 24.05.

Asks: Set the default patron categories to not receive overdues to ___

Hodnoty:

• Values are the patron categories; multiple categories can be selected.

• Default: none

Popis:

Důležité

This system preference overrides the DefaultLongOverduePatronCategories system preference. Therefore, if it is filled, all patron categories except the ones listed will be processed, regardless of the values in DefaultLongOverduePatronCategories.

• This system preference is used to exclude specific patron categories from the automatic long overdue process (enabled by the DefaultLongOverdueLostValue and DefaultLongOverdueDays system preferences).

  • For example, you might want to process long overdues automatically for everyone except students.

• If this field is empty, all patron categories will be subject to the long overdue process.

• This system preference is used when the longoverdue cron job is called without the --skip-category parameter.

• This system preference allows libraries to set the values of the longoverdue cron without having to edit the crontab.

HomeOrHoldingBranch

Default: the item’s home library (homebranch).

Asks: Use the checkout and fines rules of ___

Hodnoty:

• the item’s home library (homebranch).

• the item’s holding library (holdingbranch).

Popis:

• Tato systémová nastavení jsou obecná systémová nastavení pro váš systém.

  • If CircControl is set to ‚the library the item is from‘ then the circulation and fines policies will be determined by the item’s library where HomeOrHoldingBranch chooses if item’s home library is used or holding library is used.

  • If IndependentBranches is set to ‚Prevent‘ then the value of this preference is used in figuring out if the item can be checked out. If the item’s home library does not match the logged in library, the item cannot be checked out unless you have the superlibrarian permission.

  Důležité

  It is not recommend that this setting be changed after initial setup of Koha because it will change the behavior of items already checked out.

IssuingInProcess

Výchozí: Povolit

Asks: ___ patrons from checking out an item whose rental charge would take them over the limit.

Hodnoty:

• Povolit

• Prevent

Popis:

• Tato předvolba určuje, zda čtenář si může si vypůjčit knihu, když má pokutu za zpoždění a jakýchkoliv materiál, který si čtenář chce půjčit by mohl poplatkem překročit maximum na účtu, které je stanoveno výpůjční politikou.

Example: Your library has a $5 limit set for ‚fines‘ (i.e., after incurring $5 in fines, a patron can no longer check out items). A patron comes to the desk with 5 items to check out (4 books and a video) The patron has $4 in charges already on their account. One of the videos has a rental charge of $1, therefore making the total fines on the patron’s account suddenly $5 (the limit).

ItemsDeniedRenewal

Asks: Define custom rules to deny specific items from renewal.

Popis:

• This preference allows you to specify items that should not be renewed either from the OPAC or staff client. You can enter any combination of fields (from the items table in the Koha database) followed by a colon then a space then a bracketed list of values separated by commas. e.g:

  ccode: [NEWFIC,NULL,DVD]
  itype: [NEWBK,""]
  

• The word ‚NULL‘ can be used to block renewal on undefined fields, while an empty string „“ will block on an empty (but defined) field.

  Poznámka

  If using automatic renewal notices your notice text should be updated to account for the new reason that renewals may be denied „item_denied_renewal“.

LoadCheckoutsTableDelay

Version

This system preference was added in Koha version 23.11.

Asks: Delay the automatic loading of the checkouts table on the checkouts page by ___ seconds when „Always show checkouts automatically“ is enabled.

Výchozí: 0

Popis:

• This system preference is used to delay the loading of the checkouts table in a patron’s account to prevent too many service queries when checking out a number of items in a row.

• Enter a positive integer, such as 5, to delay the loading of the table and prevent it from reloading after each check out.

maxoutstanding

Výchozí: 5

Asks: Prevent patrons from making holds on the OPAC if they owe more than ___ USD in fines.

noissuescharge

Asks: Prevent patrons from checking out items if they have more than ___ {currency} in fines.

Výchozí: 5

Popis:

• This preference is the maximum amount of money owed to the library before the user is banned from borrowing more items.

• By default, this includes all debit types (overdue fines, account creation fees, hold fees, manual fees, rental fees, etc.), but it’s possible to exclude debit types or to include custom manual debit types using the ‚Included in noissuescharge‘ option when creating or editing a debit type.

See also:

• maxoutstanding

• NoIssuesChargeGuarantees

• NoIssuesChargeGuarantorsWithGuarantees

• AllFinesNeedOverride

• AllowFineOverride

NoIssuesChargeGuarantees

Asks: Prevent a patron from checking out if the patron has guarantees owing in total more than ___ USD in fines.

Popis:

• Allows a library to prevent patrons from checking out items if his or her guarantees owe too much in fines.

NoIssuesChargeGuarantorsWithGuarantees

Asks: Prevent a patron from checking out if the patron has guarantors and those guarantor’s guarantees owing in total more than ___ (currency) in fines.

Popis:

• Allows a library to prevent patrons from checking out items if their guarantees or their guarantees‘ other guarantors owe too much in fines.

• This effectively blocks the entire family.

NoRenewalBeforePrecision

Default: date

Asks: Calculate „No renewal before“ based on ___.

Hodnoty:

• date

• exact time

  Poznámka

  Only relevant for loans calculated in days, hourly loans are not affected.

Popis:

• This preference allows you to control how the ‚No renewal before“ option in the circulation and fines rules administration area.

NoticeBcc

Asks: Send all notices as a BCC to this email address ___

This preference makes it so that a librarian can get a copy of every notice sent out to patrons.

Poznámka

Pokud chcete zadat více než jednu osobu pro příjem skrytých kopií, můžete je jednoduše zadat jako více e-mailových adres oddělených čárkami.

OnSiteCheckoutAutoCheck

Výchozí: Neumožnit

Asks: ___ onsite checkout by default if last checkout was an onsite one.

Hodnoty:

• Neumožnit

• Umožnit

Popis:

• This preference allows you specify that if a preceding checkout was an onsite checkout, then the ‚On-site checkout‘ checkbox will be ticked ready for the next checkout.

OnSiteCheckouts

Výchozí: Nepovolit

Asks: ___ the on-site checkouts feature.

Hodnoty:

• Vypnout

• Umožnit

  

Popis:

• This preference lets you check out items that are ‚not for loan‘ to patrons. A checkbox is added to the checkout screen when this preference is set to ‚Enable‘ labeled ‚On-site checkout‘. This allows you to track who’s using items that are normally not for loan or are in a closed stack setting.

OnSiteCheckoutsForce

Výchozí: Nepovolit

Asks: ___ the on-site for all cases (Even if a user is debarred, etc.).

Hodnoty:

• Vypnout

• Umožnit

  

Popis:

• This preference lets the staff override any restrictions a patron might have and check out items for use within the library. The OnSiteCheckouts preference must first be set to ‚Enable‘ for this preference to be considered.

OPACFineNoRenewalsBlockAutoRenew

Výchozí: Povolit

Asks: If a patron owes more than the value of OPACFineNoRenewals, ___ his/her auto renewals.

Hodnoty:

• Povolit

• Blokovat

OverdueNoticeCalendar

Asks: ___ when working out the period for overdue notices

Default: Ignore calendar

Hodnoty:

• Ignore calendar

  • Notices do not take holidays into account, so they will be sent even if holidays have meant the item is not actually overdue yet

• Use calendar

  • Notices take holidays into account, so they will not be sent if holidays mean the item is not actually overdue yet

OverdueNoticeFrom

Asks: Organize and send overdue notices using the ___.

Default: command-line option

Hodnoty:

• command-line option

• item home library

• checkout library

• patron home library

  Version

  The „patron home library“ option was added in Koha version 23.11.

Popis:

• This system preference determines which library’s information will be used in the overdue notices (if there is information in the notice template such as <<branches.branchname>> or <<branches.branchphone>>, or, in the new syntax, [% branch.branchname %] or [% branch.branchphone %]) and which email address will be used to send the notices.

• This system preference overrides the –frombranch parameter in the overdue_notices.pl cronjob.

• When set to „command-line option“, the library information will be that of the –frombranch parameter in the overdue_notices.pl cronjob or the checkout library if the parameter is absent.

• When set to „item home library“, the library information will be that of the overdue item’s home library.

• When set to „checkout library“, the library information will be that of the library at which the overdue item was checked out.

• When set to „patron home library“, the library information will be that of the library where the patron receiving the notice is from.

OverduesBlockCirc

Výchozí: Žádat o potrvrzení

Asks: ___ when checking out to a borrower that has overdues outstanding

Hodnoty:

• Vyžadovat potvrzení

  • Nenechá vás půjčit knihu čtenářovi, který má překročené výpůjční doby, pokud knihovník nepotvrdí, že je to v pořádku

• Blokovat

  • Blokuje všechny čtenáře s překročenou lhůtou výpůjček, aby si mohli dále půjčovat

• Neblokovat

  • Povolí všem čtenářům s překročenou lhůtou výpůjček, aby si mohli dále půjčovat

OverduesBlockRenewing

Default: allow renewing

Asks: When a patron’s checked out item is overdue, ___

Hodnoty:

• allow renewing

• block renewing for all the patron’s items

• block renewing for only this item

PrintNoticesMaxLines

Asks: Include up to ___ item lines in a printed overdue notice.

Poznámka

Je-li počet upomínaných položek větší než toto číslo, oznámení skončí varováním, které žádá, aby si dlužník ověřil svůj online účet na úplný seznam výpůjček s překročenou lhůtou.

Poznámka

Nastavit 0 pro zahrnutí všech překročených výpůjček v upomínce, bez ohledu na množství.

Důležité

Tato předvolba se týká pouze tištěných upozornění, nikoliv posílaných via e-mail.

RecordStaffUserOnCheckout

Asks: When checking out an item, ___ the user who checked out the item.

Default: don’t record

Hodnoty:

• don’t record

• record

Popis:

• This system preference determines whether the staff account who checks out an item to a patron is recorded along with the checkout.

• When set to ‚record‘ the staff account will be displayed in the staff interface in the patron’s circulation history as well as the record’s checkout history.

RenewAccruingItemInOpac

Asks: If a patron pays off all fines on an overdue item that is accruing fines in the OPAC via a payment plugin, ___ the item automatically.

Default: Don’t renew

Hodnoty:

• Don’t renew

• Prodloužení

Popis:

• This system preference allows you to control whether or not overdue items are renewed if the patron pays the fine online.

  Poznámka

  If the RenewalPeriodBase system preference is set to ‚due date‘, renewed items may still be overdue even after renewal.

RenewAccruingItemWhenPaid

Asks: If a patron pays off all fines on an overdue item that is accruing fines ___ the item automatically.

Default: Don’t renew

Hodnoty:

• Don’t renew

• Prodloužení

Popis:

• This system preference allows you to control whether or not overdue items are renewed if the fine is paid in the staff interface.

  Poznámka

  If the RenewalPeriodBase system preference is set to ‚due date‘, renewed items may still be overdue even after renewal.

RenewalPeriodBase

Výchozí: staré datum návratu výpůjčky

Asks: When renewing checkouts, base the new due date on ___

Hodnoty:

• staré datum návratu výpůjčky

• současné datum

RenewalSendNotice

Výchozí: Neposílat

Asks: ____ a renewal notice according to patron checkout alert preferences.

Hodnoty:

• Neodesílat

• Odeslat

Popis:

• Pokud má v nastavení odesílání čtenář povoleno zasílání zpráv o výpůjčkách (pomocí „Send“), bude dostávat i oznámení o jejich prodloužení. Budete tedy nejspíše chtít upravit i :ref: další zprávu <adding-notices-and-slips-label> označenou kódem RENEWAL (pokud ji tedy již nemáte nastavenou).

  Důležité

  This preference requires that you have EnhancedMessagingPreferences set to ‚Allow‘

RentalFeesCheckoutConfirmation

Default: do not ask

Asks: When checking out an item with rental fees, ___ for confirmation.

Hodnoty:

• ask

• do not ask

Popis:

• If you are charging rental fees for items this preference will make it so that you can show (or not show) a confirmation before checking out an item that will incur a rental charge.

ReturnBeforeExpiry

Výchozí: Nepožadovat

Asks: ___ patrons to return books before their accounts expire (by restricting due dates to before the patron’s expiration date).

Hodnoty:

• Nepožadovat

• Požadovat

Popis:

• Toto nastavení může zabránit čtenáři ve vypůjčení nových položek pokud mu již vypršela platnost čtenářské průkazky. Pokud je toto nastaveno na „Požadovat“ (Require), pak datum požadovaného vrácení nesmí být déle, nežli je platnost průkazky. Pokud je nastavení ponecháno na „Nepožadovat“ (Don’t require), pak lze knihy vracet i po vypršení knihovní průkazky.

StaffSearchResultsDisplayBranch

Default: the library the item is held by

Asks: For search results in the staff client, display the branch of ___

Hodnoty:

• knihovna, z které kniha pochází

• the library the items is held by

SwitchOnSiteCheckouts

Default: Don’t switch

Asks: ___ on-site checkouts to normal checkouts when checked out.

Hodnoty:

• Don’t switch

• Switch

TransfersMaxDaysWarning

Asks: Show a warning on the „Transfers to receive“ screen if the transfer has not been received ___ days after it is sent.

Výchozí: 3

Popis:

• This system preference allows for a warning to appear after a set amount of time if an item being transferred between library branches has not been received. The warning will appear in the Transfers to receive report.

UnseenRenewals

Asks: ___ renewals to be recorded as „unseen“ by the library, and count against the patrons unseen renewals limit.

Výchozí: Nepovolit

Hodnoty:

• Zakázat

• Povolit

Popis:

• This system preference enables the unseen renewals functionality. It allows staff to mark renewals as „unseen“, i.e. the staff didn’t actually see the item.

• If you activate this preference, make sure to add a value in the ‚Unseen renewals allowed (count)‘ column of the circulation and fine rules.

UpdateItemLocationOnCheckout

Version

This system preference was added in Koha version 23.11.

Asks: This is a list of value pairs. The first value is followed immediately by colon, space, then the second value.

Popis:

• This system preference affects the item’s current and permanent locations when the item is checked out.

• If the location value on the left of the colon (:) matches the item’s current location, it will be updated to match the location value on the right of the colon (:).

• The values are the LOC authorized values.

• For example, STAFF: GEN will move an item from the staff office to the general collection when the item is checked out.

• Special terms

  • PROC: Processing center. When using PROC, only the current location will be affected.

  • CART: Shelving cart. When using CART, only the current location will be affected.

  • _PERM_: This will use the item’s permanent location, whatever that location is.

  • _BLANK_: Used on the left as a first value, it will add a location if there is none. Used on the right as a second value, it will remove the location.

  • _ALL_: Used on the left as a first value, it will affect all items and override all other rules.

Varování

Requires YAML syntax to work

This means

• Make sure there is NO space between the first value and the colon

• Make sure there IS a space between the colon and the second value

• Make sure each pair is on its own line

• If using PROC or CART, use the cart_to_shelf cron job to return the items to their permanent location after a determined number of hours.

UpdateNotForLoanStatusOnCheckout

Asks: This is a list of value pairs. When an item is checked out, if the not for loan value on the left matches the items not for loan value it will be updated to the right-hand value.

Popis:

• This system preference affects the item’s ‚not for loan‘ status when the item is checked out.

• If the status value on the left of the colon (:) matches the item’s current status, it will be updated to match the status value on the right of the colon (:).

• The values are the NOT_LOAN authorized values.

• For example, ‚-1: 0‘ will cause an item that was set to ‚Ordered‘ to now be available for loan

• This system preference can also be used to only display the not for loan status. To do so, enter ONLYMESSAGE on the right of the colon. For example

  -1: ONLYMESSAGE
  

  This will simply show the label for -1 without changing the status.

Varování

Requires YAML syntax to work

This means

• Make sure there is NO space between the first value and the colon

• Make sure there IS a space between the colon and the second value

• Make sure each pair is on its own line

UseBranchTransferLimits and BranchTransferLimitsType

Defaults: Don’t enforce and collection code

Asks: ___ branch transfer limits based on ___

UseBranchTransferLimits Hodnoty:

• Navynutit

• Vynutit

BranchTransferLimitsType Hodnoty:

• kód sbírky

• typ jednotky (exempláře)

BranchTransferLimitsType Popis:

• Tato předvolba je binární nastavení, které určuje, zda jednotky (exempláře) jsou převedeny podle typu jednotky nebo kódu sbírky. Tato hodnota určuje, jak vedení knihovny je schopno omezit, jaké jednotky (exempláře) lze přenášet mezi pobočkami.

useDaysMode

Asks: ___ when calculating the date due.

Default: Use the calendar to skip days the library is closed

Hodnoty:

• Use the calendar to skip days the library is closed

• Use the calendar to push the due date to the next open day

• Ignore the calendar

• Use the calendar to push the due date to the next open matching weekday for weekly loan periods, or the next open day otherwise (Note: This preference setting only works with loan periods in multiples of 7).

Popis:

• This preference controls how scheduled library closures affect the due date of a material.

• The ‚Use the calendar to skip all days the library is closed‘ setting allows for a scheduled closure not to count as a day in the loan period.

• The ‚Ignore the calendar‘ setting would not consider the scheduled closure at all

• The ‚Use the calendar to push the due date to the next open day‘ would only affect the due date if the day the item is due would fall specifically on the day of closure.

• The final option, ‚Use the calendar to push the due date to the next open matching weekday for weekly loan periods, or the next open day otherwise‘ allows libraries to accommodate patrons who may only be able to visit the library on a certain day of the week, such as part-time students or patrons who rely on public transport.

Příklad:

• The library has put December 24th and 25th in as closures on the calendar. A book checked out by a patron has a due date of December 25th according to the circulation and fine rules.

  • If this preference is set to ‚Ignore the calendar‘ then the item will remain due on the 25th.

  • If the preference is set to ‚Use the calendar to push the due date to the next open day‘, then the due date will be December 26th.

  • If the preference is set to ‚Use the calendar to skip all days the library is closed‘ then the due date will be pushed to the 27th of December to accommodate for the two closed days.

  • If the preference is set to ‚Use the calendar to push the due date to the next open matching weekday for weekly loan periods, or the next open day otherwise‘ the item would be due back on January 1st. If January 1st was also a closed day then the item would be due back on the next available open day.

The calendar is defined on a branch by branch basis. To learn more about the calendar, check out the Calendar section of this manual.

UseTransportCostMatrix

Výchozí: Neužívat

Asks: ___ Transport Cost Matrix for calculating optimal holds filling between branches.

Hodnoty:

• Nepoužívat

• Použít

Popis:

• If the system is configured to use the Transport cost matrix for filling holds, then when attempting to fill a hold, the system will search for the lowest cost branch, and attempt to fill the hold with an item from that branch first. Branches of equal cost will be selected from randomly. The branch or branches of the next highest cost shall be selected from only if all the branches in the previous group are unable to fill the hold.

  The system will use the item’s current holding branch when determining whether the item can fulfill a hold using the Transport Cost Matrix.

Course reserves

Kurzy

Výchozí: Neužívat

Asks: ___ course reserves

Hodnoty:

• Nepoužívat

• Použít

Popis:

• Modul Kurzy umožňuje přiřadit vzdělávacím kurzům/školním předmětům materiály a pro tyto materiály na přechodnou dobu trvání kurzu změnit pravidla půjčování.

Curbside pickup module

CurbsidePickup

Asks: ___ the curbside pickup module.

Hodnoty:

• Vypnout

• Umožnit

Výchozí: Nepovolit

Popis:

• This system preference is the main switch for the curbside pickup module.

Fines policy

finesCalendar

Asks: ___ when calculating the period for fines.

Default: Use the calendar

Hodnoty:

• Ignore the calendar

• Use the calendar

Popis:

• This preference will determine whether or not fines will be accrued on days where the library is closed. Examples include holidays, library in-service days, etc.

• If set to ‚Use the calendar‘, Koha will skip closed days when calculating the overdue fines.

• If set to ‚Ignore the calendar‘, fines will be calculated directly, with no consideration of closed days.

Důležité

To make use of this setting your system administrator must first access Koha’s :ref:calendar<calendar-label>` and mark closed days as ‚holidays‘ ahead of time.

The calendar is defined on a branch by branch basis. To learn more about the calendar, check out the calendar section of this manual.

FinesIncludeGracePeriod

Výchozí: Zahrnout

Asks: ___ the grace period when calculating the fine for an overdue item.

Hodnoty:

• Nezahrnovat

• Zahrnout

Popis:

• Tato předvolba umožňuje řídit, jak Koha vypočítává pokuty v případě, že existuje doba tolerance (doba odkladu). Pokud se rozhodnete zahrnout tuto dobu tolerance do výpočtu pokut, pak Koha bude účtovat pokutu i za dny v době tolerance, kdy kniha nebyla vrácena. Pokud se rozhodnete nezahrnovat toleranční dobu, pak Koha bude účtovat pokuty pouze za překročené dny po uplynutí doby odkladu.

finesMode

Asks: ___ fines

Default: Don’t calculate

Hodnoty:

• Nepočítat

• Počítat a zpoplatnit

  Důležité

  If this system preference is set to ‚Calculate and charge‘, you must either add the fines cron job to your crontab, or enable CalculateFinesOnReturn

  If the cronjobs/fines.pl cronjob is being run, accruing and final fines will be calculated when the cron runs and accruing fines will be finalized when an item is returned. If CalculateFinesOnReturn is enabled, final fines will be calculated when an item is returned.

HoldFeeMode

Default: only if all items are checked out and the record has at least one hold already.

Asks: Charge a hold fee ___

Hodnoty:

• any time a hold is collected.

• any time a hold is placed.

• only if all items are checked out and the record has at least one hold already.

NoRefundOnLostReturnedItemsAge

Asks: Don’t refund lost fees if a lost item is checked in more than ___ days after it was marked lost.

Popis:

• Enter a number of days after which lost items are not refunded.

Poznámka

Set the refund policy in the default lost item fee refund on return policy rule in the circulation and fines rules.

ProcessingFeeNote

Asks: Set the text to be recorded in the column ‚note‘, table ‚accountlines‘ when the processing fee (defined in item type) is applied.

RefundLostOnReturnControl

Asks: If a lost item is returned, apply the refunding rules defined in the ___

Default: check-in library.

Hodnoty:

• check-in library.

• item holding branch.

• item home branch.

Popis:

• This refers to the default lost item fee refund on return policy rule in the circulation and fines rules.

Poznámka

You can limit the number of days after which a lost item is not refunded using the NoRefundOnLostReturnedItemsAge system preference.

SuspensionsCalendar

Výchozí: nezahrnovat dny, kdy je knihovna zavřená

Asks: Calculate suspension expiration based on days overdue ___

Hodnoty:

• Ignore the calendar

• Use the calendar

Popis:

• This system preference determines whether the calendar is taken into account when making suspension calculations. Suspension rules can be configured within the circulation rules. If set to ‘directly’ the suspension period will ignore any closed days that have been added to the calendar. If set to ‘not including the days the library is closed’ any days marked as closed within the calendar will be skipped when calculating the end date for the suspension.

useDefaultReplacementCost

Výchozí: Neužívat

Žádá: ___ výchozí náhradovou cenu uvedenou u typu jednotky.

Hodnoty:

• Nepoužívat

• Použít

Popis:

• This preference enables the use of the replacement cost set on the item type level

Účtovat

Výchozí: prog

Asks: ___ the replacement price when a patron loses an item.

Hodnoty:

• Poplatek

• Neskrývat

Popis:

• This preference lets you tell Koha what to do with an item is marked lost. If you want Koha can ‚Charge‘ the patron the replacement fee listed on the item they lost or it can do nothing in reference to the patron and just mark the item lost in the catalog.

WhenLostForgiveFine

Výchozí: Nestěhonat

Asks: ___ the fines on an item when it is lost.

Hodnoty:

• Nenutit

• Prominuto

Popis:

• This preference allows the library to decide if fines are charged in addition to the replacement fee when an item is marked as lost. If this preference is set to ‚Forgive‘ then the patron won’t be charged fines in addition to the replacement fee.

Holds policy

AllowHoldDateInFuture

Výchozí: Povolit

Asks: ___ hold requests to be placed that do not enter the waiting list until a certain future date.

Hodnoty:

• Povolit

• Zakázat

AllowHoldItemTypeSelection

Asks: ___ hold fulfillment to be limited by itemtype.

Výchozí: Nepovolit

Hodnoty:

• Povolit

• Zakázat

Popis:

• If this system preference is set to ‚Allow‘, staff and patrons will be able to choose a specific item type when placing a hold in the staff interface or placing a hold in the OPAC.

AllowHoldPolicyOverride

Výchozí: Povolit

Asks: ___ staff to override hold policies when placing holds.

Hodnoty:

• Povolit

• Zakázat

Popis:

• This preference is a binary setting which controls whether or not the library staff can override the circulation and fines rules as they pertain to the placement of holds. Setting this value to „Don’t allow“ will prevent anyone from overriding, setting it to „Allow“ will allow it. This setting is important because it determines how strict the libraries rules for placing holds are. If this is set to „Allow“, exceptions can be made for patrons who are otherwise normally in good standing with the library, but there is opportunity for the staff to abuse this function. If it is set to „Don’t allow“, no abuse of the system is possible, but it makes the system entirely inflexible in respect to holds.

AllowHoldsOnDamagedItems

Výchozí: Povolit

Asks: ___ hold requests to be placed on damaged items.

Hodnoty:

• Povolit

• Zakázat

Popis:

• This parameter is a binary setting which controls whether or not hold requests can be placed on items that are marked as „damaged“ (items are marked as damaged by editing subfield 4 on the item record). Setting this value to „Don’t allow“ will prevent anyone from placing a hold on such items, setting it to „Allow“ will allow it. This preference is important because it determines whether or not a patron can place a request for an item that might be in the process of being repaired or not in good condition. The library may wish to set this to „Don’t allow“ if they were concerned about their patrons not receiving the item in a timely manner or at all (if it is determined that the item is beyond repair). Setting it to „Allow“ would allow a patron to place a hold on an item and therefore receive it as soon as it becomes available.

AllowHoldsOnPatronsPossessions

Výchozí: Povolit

Asks: ____ a patron to place a hold on a record where the patron already has one or more items attached to that record checked out.

Hodnoty:

• Povolit

• Zakázat

Popis:

• Při nastavení na „Nedovolit,“ můžete zabránit čtenářům, aby si rezervovali knihy, které mají vypůjčené, čímž by blokovali jiné jiné čtenáře od této výpůjčky.

AllowRenewalIfOtherItemsAvailable

Výchozí: Nepovolit

Asks: ___ a patron to renew an item with unfilled holds if other available items can fill that hold.

Hodnoty:

• Povolit

• Zakázat

AutomaticCheckinAutoFill

Version

This system preference was added to Koha in version 23.11.

Asks: ___ holds to be automatically filled after being automatically checked in.

Výchozí: Nepovolit

Hodnoty:

• Povolit

• Zakázat

Popis:

• This system preference is used when automatic check-in is enabled.

• Upon check-in, the next hold will be automatically filled and a notification will be sent to the patron to let them know that their hold is waiting.

• This system preference requires the automatic_checkin.pl cronjob.

AutoResumeSuspendedHolds

Výchozí: Povolit

Asks: ___ suspended holds to be automatically resumed by a set date.

Hodnoty:

• Povolit

• Zakázat

Popis:

• If this preference is set to ‚Allow‘ then all suspended holds will be able to have a date at after which they automatically become unsuspended. If you have this preference set to ‚Allow‘ you will also need the Unsuspend Holds cron job running.

  Důležité

  Rezervace se stane opět aktivní po datumu, které určí čtenář.

CanMarkHoldsToPullAsLost

Asks: ___ from the ‚Holds to pull‘ screen

Default: Do not allow to mark items as lost

Hodnoty:

• Allow to mark items as lost

• Allow to mark items as lost and notify the patron

• Do not allow to mark items as lot

Popis:

• This preference lets you choose whether the staff can mark items as lost directly from the ‚Holds to pull‘ list if they can’t find the item on the shelf.

• The actual lost value that will be assigned to the item is defined in the UpdateItemWhenLostFromHoldList system preference.

• If the patron is notified, the message sent will be based on the CANCEL_HOLD_ON_LOST template. It can be customized in the Notices and slips tool.

Varování

This only applies to item-level holds.

canreservefromotherbranches

Výchozí: Povolit

Asks: ___ a user from one library to place a hold on an item from another library

Popis:

• This preference is a binary setting which determines whether patrons can place holds on items from other branches. If the preference is set to „Allow“ patrons can place such holds, if it is set to „Don’t allow“ they cannot. This is an important setting because it determines if users can use Koha to request items from another branch. If the library is sharing an installation of Koha with other independent libraries which do not wish to allow interlibrary borrowing it is recommended that this parameter be set to „Don’t allow“.

Hodnoty:

• Povolit

• Don’t allow (with IndependentBranches)

Potvrdit rezervace

Výchozí: 0

Asks: Confirm future hold requests (starting no later than ___ days from now) at checkin time.

Popis:

• When confirming a hold at checkin time, the number of days in this preference is taken into account when deciding which holds to show alerts for. This preference does not interfere with renewing, checking out or transferring a book.

  Poznámka

  dní). Poznámka: Tento počet dní bude použit i ve výchozím filtru, při vyhledávání rezervací, které je třeba najít na regále. Toto nastavení nemá vliv na půjčování, prodlužování ani přesun jednotek.

  Důležité

  This preference is only looked at if you’re allowing hold dates in the future with AllowHoldDateInFuture or OPACAllowHoldDateInFuture

decreaseLoanHighHolds, decreaseLoanHighHoldsDuration, decreaseLoanHighHoldsValue, decreaseLoanHighHoldsControl, and decreaseLoanHighHoldsIgnoreStatuses

Asks: ___ the reduction of loan period ___ to days for high demand items with more than ___ holds ___ . Ignore items with the following statuses when counting items ___

decreaseLoanHighHolds výchozí: Neumožnit

decreaseLoanHighHoldsControl default: on the record

Hodnoty:

decreaseLoanHighHolds

• Neumožnit

• Umožnit

decreaseLoanHighHoldsControl

• over the number of holdable items on the records

• on the record

decreaseLoanHighHoldsIgnoreStatuses

• [Select All]

• Damaged

• Ztráceno

• Nelze vypůjčit

• Staženo z oběhu

Popis:

• These preferences let you change the loan length for items that have many holds on them. This will not affect items that are already checked out, but items that are checked out after the decreaseLoanHighHoldsValue is met will only be checked out for the number of days entered in the decreaseLoanHighHoldsDuration preference.

  

DefaultHoldPickupLocation

Asks: When placing a hold via the staff interface default the pickup location to the ___ .

Hodnoty:

• item’s holding library

• item’s home library

• logged in library

Default: logged in library

Popis:

• This system preference lets you determine which library is the default pickup location while placing holds in the staff interface.

Varování

This system preference only applies to item-level holds.

DisplayMultiItemHolds

Version

This system preference was added to Koha in version 24.05.

Asks: ___ the ability to place holds on different items at the same time in staff interface and OPAC.

Hodnoty:

• Neumožnit

• Umožnit

Výchozí: Neumožnit

Popis:

• This system preference is used to enable the possibility of placing multiple item-level holds on one record.

• If enabled, staff and patrons will be able to select multiple items in the ‚Hold a specific item‘ section.

• This system preference applies to both the staff interface and the OPAC.

• For this feature to work, circulation rules must allow multiple holds per record.

DisplayMultiPlaceHold

Výchozí: Neumožnit

Asks: ___ the ability to place holds on multiple biblio from the search results

Hodnoty:

• Neumožnit

• Umožnit

emailLibrarianWhenHoldIsPlaced

Výchozí: Neumožnit

Asks: ___ sending an email to the Koha administrator email address whenever a hold request is placed.

Hodnoty:

• Neumožnit

• Umožnit

Popis:

• Tato předvolba umožňuje poslat email knihovnímu personál, vždy když čtenář požádá o rezervaci. Pokud je tato funkce nastavena, bude knihovník okamžitě upozorněn na čtenářovo přání, což je dosti nepraktické pro většinu knihoven. Ve většině knihoven se seznamy rezervací monitorují a spravují ze samostatného rozhraní. To ale znamená, že většina knihoven, které umožňují rezervace na knihy ve skladu (objednávky), dávají přednost tomu, aby tato možnost byla zapnuta, aby byli upozorněni na potřebu vyzvednutí knihy ze skladu.

  Důležité

  In order for this email to send you must have a notice template with the code of HOLDPLACED

  Důležité

  This notice will only be sent if the process_message_queue.pl cron job is being run periodically to send the messages.

EmailPatronWhenHoldIsPlaced

Version

This system preference was added to Koha in version 23.11.

Asks: ___ a patron when they have placed a hold.

Default: Don’t email

Hodnoty:

• Don’t email

• Email

Popis:

• This system preference determines whether an email is sent to the patron after they place a hold.

• The notice sent is based on the HOLDPLACED_PATRON template, which can be customized in the notices and slips tool.

EnableItemGroupHolds

Asks: ___ the ability to place holds on item groups.

Hodnoty:

• Neumožnit

• Umožnit

Výchozí: Neumožnit

Popis:

• This system preference allows users to place holds on item groups.

• This is useful if you need to place holds on a subset of items on a bibliographic record, rather than a specific item or the next available item.

• Requires EnableItemGroups

EnableItemGroups

Výstraha

As of version 23.11 of Koha, this system preference is under cataloging preferences.

See EnableItemGroups.

Asks: ___ the item groups feature to allow collecting groups of items on a record together.

Popis:

• This system preference enables the item groups feature.

• It can be used with EnableItemGroupHolds to allow holds on item groups.

ExcludeHolidaysFromMaxPickUpDelay

Asks: ___ when calculating the period for a hold’s max pickup delay.

Default: Ignore the calendar

Hodnoty:

• Ignore the calendar

• Use the calendar

Popis:

• This system preference determines whether or not closed days in the calendar are taken into account when calculating the time period for patrons to pick up their holds (see ReservesMaxPickUpDelay).

• If set to ‚Ignore the calendar‘, the pickup delay will be calculated directly.

• If set to ‚Use the calendar‘, holidays will be excluded from the pickup delay.

ExpireReservesMaxPickUpDelay

Výchozí: Nepovolit

Asks: ___ holds to expire automatically if they have not been picked by within the time period specified in ReservesMaxPickUpDelay

Hodnoty:

• Povolit

• Zakázat

Popis:

• If set to ‚allow‘ this will cancel holds that have been waiting for longer than the number of days specified in the ReservesMaxPickUpDelay system preference. Holds will only be cancelled if the Expire Holds cron job is running.

ExpireReservesAutoFill

Asks: ___ automatically fill the next hold using the item.

Výchozí: Ne

Hodnoty:

• Ne

• Ano

Popis:

• If ExpireReservesMaxPickUpDelay is set to ‚Allow‘, you can choose to automatically fill the next hold when a hold is cancelled.

• If this system preference is set to „Don’t“, the expired hold will be cancelled, but the item will not be used to fill the next hold, if there is one. Staff must manually check in the item in order to trigger the next hold.

• If this system preference is set to „Do“, the item will be used to fill the next hold, if there is one, without manual input from staff members.

  • If they opted to receive ‚Hold filled‘ notices, a notification will be sent to the next patron to advise them that they can now come pick up their hold.

    Poznámka

    The notice sent is based on the HOLD template, which can be customized in the Notices and slips tool.

  • A notification will also be sent to the email address in ExpireReservesAutoFillEmail to alert staff that the hold is now waiting for someone else.

    Poznámka

    The notice sent is based on the HOLD_CHANGED template, which can be customized in the Notices and slips tool.

Varování

This system preference will not have any effect unless ExpireReservesMaxPickUpDelay is set to ‚Allow‘.

ExpireReservesAutoFillEmail

Asks: Send email notification of the new hold filled with a canceled item to ___.

Popis:

• If ExpireReservesMaxPickUpDelay is set to ‚Allow‘, and ExpireReservesAutoFill is set to ‚Do‘, an email will be sent to alert staff that the hold is now waiting for someone else.

  Poznámka

  The notice sent is based on the HOLD_CHANGED template, which can be customized in the Notices and slips tool.

• If this system preference is empty, the notification will be sent to the library’s reply-to address.

Varování

This system preference will not have any effect unless ExpireReservesAutoFill is set to ‚Do‘.

ExpireReservesMaxPickUpDelayCharge

Výchozí: 0

Asks: If using ExpireReservesMaxPickUpDelay, charge a borrower who allows his or her waiting hold to expire a fee of ___ USD

Popis:

• If you are expiring holds that have been waiting too long you can use this preference to charge the patron for not picking up their hold. If you don’t charge patrons for items that aren’t picked up you can leave this set to the default which is 0. Holds will only be cancelled and charged if the Expire Holds cron job is running.

ExpireReservesOnHolidays

Výchozí: Povolit

Asks: If using ExpireReservesMaxPickUpDelay, ___ expired holds to be canceled on days the library is closed per the calendar.

Hodnoty:

• Povolit

• Zakázat

HoldRatioDefault

Version

This system preference was added to Koha in version 24.05.

Asks: Default the holds ratio report to ___.

Výchozí: 3

Popis:

• This system preference determines the default value for the hold ratios report.

HoldsQueuePrioritizeBranch

Asks: The holds queue should prioritize filling a hold by matching the patron’s home library with an item having a matching ___.

Hodnoty:

• holding library (holdingbranch)

• home library (homebranch)

Default: home library (homebranch)

Popis:

• This system preference determines whether a hold should be filled in priority by an item currently at the library the hold will be collected from (holding library option) or by an item whose home library matches the pickup library (home library option).

• Setting this preference to ‚holding library (holdingbranch)‘ will help minimize the number of items transferred between libraries.

• This preference may be of special interest to library services that float items (who have set the Return policy in the Default holds policy by item type to either ‚Item floats‘ or ‚Item floats by library group‘). These services will likely have many items whose holding library does not match the home library.

• This preference can be used either on its own or in conjunction with the LocalHoldsPriority, LocalHoldsPriorityPatronControl and LocalHoldsPriorityItemControl preferences. After checking LocalHoldsPriority, Koha will look at HoldsQueuePrioritizeBranch to decide how to fill the waiting holds.

  Poznámka

  The difference between HoldsQueuePrioritizeBranch on one hand and LocalHoldsPriority, LocalHoldsPriorityPatronControl, LocalHoldsPriorityItemControl on the other is that the first only affects which item is chosen to fill a hold, whereas the latter apply to which patron is given priority in getting that item.

HoldsSplitQueue

Default: nothing

Asks: In the staff client, split the holds queue into separate tables by ___

Hodnoty:

• pickup library

• pickup library and itemtype

• hold itemtype

• nothing

Popis:

• This feature allows you to separate holds by pickup library or itemtype in the holds page of a record (not in the global holds queue found on the circulation page).

• When using the up and down arrows the priorities will be changed only in the group the holds belongs to.

HoldsSplitQueueNumbering

Default: the actual priority, which may be out of order

Asks: If the holds queue is split, show librarians ___

Hodnoty:

• the actual priority, which may be out of order

• ‚virtual‘ priorities, where each group is numbered separately

Popis:

• This system preference is only effective if HoldsSplitQueue is set to any value except ‚nothing‘.

• This system preference controls the priority numbering on the holds page of a record (not in the global holds queue found on the circulation page).

LocalHoldsPriority, LocalHoldsPriorityPatronControl, LocalHoldsPriorityItemControl

Asks: ___ priority for filling holds to patrons whose ___ matches the item’s ___

LocalHoldsPriority Values:

• Don’t give

• Give

LocalHoldsPriorityPatronControl Values:

• domovská knihovna

• pickup library

LocalHoldsPriorityItemControl Values:

• knihovna vlastnící svazek

• domovská knihovna

Popis:

• This feature will allow libraries to specify that, when an item is returned, a local hold may be given priority for fulfillment even though it is of lower priority in the list of unfilled holds.

• This means that when LocalHoldsPriority is set to ‚Give‘, matching patrons will potentially jump the queue and be given priority for the item over other patrons whose holds were placed earlier.

• Prioritization of items in the holds queue can be refined using the HoldsQueuePrioritizeBranch system preference.

maxreserves

Výchozí: 50

Asks: Patrons can only have ___ holds at once.

OPACAllowHoldDateInFuture

Výchozí: Povolit

Asks: ___ patrons to place holds that don’t enter the waiting list until a certain future date.

Hodnoty:

• Povolit

  • AllowHoldDateInFuture must also be enabled for this to work

• Zakázat

OPACAllowUserToChangeBranch

Asks: Allow users to change the library to pick up a hold for these statuses: ___

Default: none

Values (multiple values allowed):

• [Označit vše]

• In transit

• Pending

• Suspended

Popis:

• This system preference is used to allow patrons to change the pickup location of their holds through their account in the OPAC.

• This system preference allows multiple values. Check all that apply.

• By default, patrons cannot change the pickup location of their holds from the OPAC.

• When one or more status is selected, a ‚Change‘ link will appear under the current pickup library’s name for holds that have that status in the holds tab of the patron’s account.

  

OPACAllowUserToChooseBranch

Výchozí: Povolit

Asks: ___ a user to choose the library to pick up a hold from.

Hodnoty:

• Povolit

• Zakázat

Popis:

• Changing this preference will not prevent staff from being able to transfer titles from one library to another to fill a hold, it will only prevent patrons from saying they plan on picking a book up at a library other than their home library.

• The list of available pickup locations will include all libraries that have ‚Pickup location‘ set to ‚Yes‘ on the library configuration page.

OPACHoldsIfAvailableAtPickup

Výchozí: Povolit

Asks: ___ to pickup holds at libraries where the item is available.

Hodnoty:

• Zakázat

• Povolit

Popis:

• Prevents borrowers from requesting items that are on the shelf at the same branch at which they wish to pick up those items.

OPACHoldsIfAvailableAtPickupExceptions

Asks: Patron categories not affected by OPACHoldsIfAvailableAtPickup: ___

Hodnoty:

• Values are the patron categories; multiple categories can be selected.

Default: none

Popis:

• Patron categories selected here are unaffected by OPACHoldsIfAvailableAtPickup.

RealTimeHoldsQueue

Asks: ___ updating the holds queue in real time.

Výchozí: Nepovolit

Hodnoty:

• Vypnout

• Umožnit

Popis:

• This system preference is used to enable the automatic updating of the holds queue.

• If this system preference is set to ‚Disable‘, the build_holds_queue.pl cronjob should be run regularly to build the holds queue.

ReservesControlBranch

Výchozí: domovská knihovna jednotky (výtisku)

Asks: Check the ___ to see if the patron can place a hold on the item.

Hodnoty:

• domovská knihovna jednotky (výtisku).

• domovská knihovna čtenáře

ReservesMaxPickUpDelay

Výchozí: 7

Asks: Mark a hold as problematic if it has been waiting for more than ___ days.

Popis:

• This preference (based on calendar days, not the Koha holiday calendar) puts an expiration date on an item a patron has on hold. After this expiration date the staff will have the option to release the unclaimed hold which then may be returned to the library shelf or issued to the next patron on the item’s hold list. Items that are ‚expired‘ by this preference are moved to the ‚Holds Over‘ tab on the Holds Awaiting Pickup report.

Poznámka

This can be set at a more granular level in the circulation and fine rules.

ReservesNeedReturns

Výchozí: Ne automaticky

Asks: ___ mark holds as found and waiting when a hold is placed specifically on them and they are already checked in.

Hodnoty:

• Automaticky

• Ne automaticky

Popis:

• This preference refers to ‚item specific‘ holds where the item is currently on the library shelf. This preference allows a library to decide whether an ‚item specific‘ hold is marked as „Waiting“ at the time the hold is placed or if the item will be marked as „Waiting“ after the item is checked in. This preference will tell the patron that their item is ‚Waiting‘ for them at their library and ready for check out.

StaticHoldsQueueWeight, HoldsQueueSkipClosed and RandomizeHoldsQueueWeight

StaticHoldsQueueWeight Výchozí: 0

HoldsQueueSkipClosed Default: open or closed

RandomizeHoldsQueueWeight Výchozí: v tomto pořadí

Asks: Satisfy holds using items from the libraries ___ (as branchcodes, separated by commas; if empty, uses all libraries) when they are ___ ___.

HoldsQueueSkipClosed Values:

• open or closed

• open

RandomizeHoldsQueueWeight Values:

• v náhodném pořadí

  • Pokud StaticHoldsQueueWeight je ponecháno na výchozí hodnotě, Koha bude vybírat náhodně všechny knihovny, jinak to bude jen náhodný výběr knihoven na seznamu.

• v tomto pořadí

  • Pokud StaticHoldsQueueWeight je ponecháno ve výchozí hodnotě, pak toto bude využívat všechny vaše pobočky v abecedním pořadí, jinak to bude používat pobočky v pořadí, v jakém jste je zadali do předvolby StaticHoldsQueueWeight.

Popis:

• These preferences control how the Holds Queue report is generated using a cron job.

  If you do not want all of your libraries to participate in the on-shelf holds fulfillment process, you should list the the libraries that *do* participate in the process here by inputting all the participating library’s branchcodes, separated by commas ( e.g. „MPL,CPL,SPL,BML“ etc. ).

  By default, the holds queue will be generated such that the system will first attempt to hold fulfillment using items already at the pickup library if possible. If there are no items available at the pickup library to fill a hold, build_holds_queue.pl will then use the list of libraries defined in StaticHoldsQueueWeight. If RandomizeHoldsQueueWeight is disabled ( which it is by default ), the script will assign fulfillment requests in the order the branches are placed in the StaticHoldsQueueWeight system preference.

  Například, pokud váš systém má tři knihovny, různých velikostí (malé, střední a velké) a chcete větší zátěž na plnění rezervací na větších knihovnách před menšími knihovnami, měli byste StaticHoldsQueueWeight nastavit takto „LRG, MED, SML „.

  Chcete-li zátěž na plnění rezervací rozprostřít rovnoměrně na celý knihovní systém, jednoduše zvolte RandomizeHoldsQueueWeight. Je-li tato předvolba zvolena, bude pořadí, ve kterém budou knihovny žádány aby plnily objednávky, náhodné při každé změně fronty.

  Důležité

  The Transport Cost Matrix takes precedence in controlling where holds are filled from, if the matrix is not used then Koha checks the StaticHoldsQueueWeight. To use the Transport Cost Matrix simply set your UseTransportCostMatrix preference to ‚Use‘

SuspendHoldsIntranet

Výchozí: Povolit

Asks: ___ holds to be suspended from the intranet.

Hodnoty:

• Povolit

• Zakázat

Popis:

• The holds suspension feature can be turned on and off in the staff client by altering this system preference. If this is set to ‚allow‘ you will want to set the AutoResumeSuspendedHolds system preference.

SuspendHoldsOpac

Výchozí: Povolit

Asks: ___ holds to be suspended from the OPAC.

Hodnoty:

• Povolit

• Zakázat

Popis:

• The holds suspension feature can be turned on and off in the OPAC by altering this system preference. If this is set to ‚allow‘ you will want to set the AutoResumeSuspendedHolds system preference.

Přesouvat

Výchozí: Nesledovat

Asks: ___ items when cancelling all waiting holds.

Hodnoty:

• Výchozí: Nesledovat

• Přesun

Popis:

• When TransferWhenCancelAllWaitingHolds is set to „Don’t transfer“, no branch transfer records are created. Koha will not allow the holds to be transferred, because that would orphan the items at the library where the holds were awaiting pickup, without any further instruction to staff as to what items are at the library or where they need to go. When that system preference set to „Transfer“, branch transfers are created, so the holds may be cancelled.

UpdateItemWhenLostFromHoldList

Asks: Update item’s values when marked as lost from the hold to pull screen.

Popis:

• This is a list of values to update an item when it is marked as lost from the holds to pull screen. For example, write „itemlost: 1“ to set the items. itemlost value to 1 when the item is marked as lost. This will use the authorized value 1 from the LOST authorized value category.

• Examples of keywords:

  • itemlost: lost status, uses the LOST authorized value category

  • notforloan: not for loan status, uses the NOT_LOAN authorized value category

  • withdrawn: withdrawn status, uses the WITHDRAWN authorized value category

  • damaged: damaged status, uses the DAMAGED authorized value category

  • location: location code, uses the LOC authorized value category

  • ccode: collection code, uses the CCODE authorized value category

• This preference requires that the CanMarkHoldsToPullAsLost system preference be set to either ‚Allow‘ option

Varování

Requires YAML syntax to work.

This means

• Make sure there is NO space between the field name and the colon

• Make sure there IS a space between the colon and the value

• Make sure each pair is on its own line

Housebound module

HouseboundModule

Výchozí: Nepovolit

Asks: ___ housebound module

Hodnoty:

• Vypnout

• Umožnit

Popis:

• This preference enables or disables the Housebound module which handles management of circulation to Housebound readers.

Rozhraní

AllowAllMessageDeletion

Výchozí: Nepovolit

Asks: ___ staff to delete messages added from other libraries.

Hodnoty:

• Povolit

• Zakázat

AllowCheckoutNotes

Výchozí: Nepovolit

Asks: ___ patrons to submit notes about checked out items.

Hodnoty:

• Zakázat

• Povolit

This preference if set to allow will give your patrons the option to add a note to an item they have checked out on the OPAC side. This note will be seen on the staff side when the item is checked in.

Offline výpůjčky

Výstraha

This system preference was removed in Koha version 23.11. The offline circulation module was deprecated. Only the Firefox plugin and Windows tool are now supported.

Výchozí: Neumožnit

půjčování a vracení offline (ztracené internetové připojení) v prohlížeči na normálních PC.

Hodnoty:

• Neumožnit

• Umožnit

Popis:

• Setting this preference to ‚Enable‘ allows you to use the Koha interface for offline circulation. This system preference does not affect the Firefox plugin or the desktop application, any of these three options can be used for offline circulation without effecting the other.

AutoSwitchPatron

Asks: ___ the automatic redirection to another patron when a patron cardnumber is scanned instead of an item barcode.

Výchozí: Neumožnit

Hodnoty:

• Neumožnit

• Umožnit

Popis:

• Enabling this system preference allows staff to scan a patron barcode instead of an item barcode in the checkout box to switch patron records.

Varování

This should not be enabled if you have overlapping patron cardnumbers and item barcodes.

CircAutoPrintQuickSlip

Asks: When an empty barcode field is submitted in circulation ___ .

Výchozí: otevřít okno pro rychlý tisk lístku

Hodnoty:

• vymaž obrazovku

• nedělat nic

  Version

  The option to ‚do nothing‘ was added to Koha in version 24.05.

• otevřít okno pro rychlý tisk lístku

• otevřít okno pro rychlý tisk lístku

Popis:

• If this preference is set to open a quick slip (ISSUEQSLIP) or open a slip (ISSUESLIP) for printing it will eliminate the need for the librarian to click the print button to generate a checkout receipt for the patron they’re checking out to. If the preference is set to clear the screen then „checking out“ an empty barcode will clear the screen of the patron you were last working with.

CircConfirmItemParts

Asks: ___ staff to confirm that all parts of an item are present at checkin/checkout.

Výchozí: Nepožadovat

Hodnoty:

• Nepožadovat

• Požadovat

Popis:

• This system preference controls whether a message or an alert asking for confirmation is shown when checking out or checking in an item with accompanying materials.

• The message/alert will appear if the item has a value in the „3 - Materials specified (bound volume or other part)“ item field (952$3)

• If the value is set to „Don’t require“, a simple message will appear at checkin and checkout

  

• If the value is set to „Require“, there will be an alert asking staff to confirm that they checked that all parts are present

  At checkout

  

  At checkin

  

CircSidebar

Default: Deactivate

Asks: ___ the navigation sidebar on all Circulation pages.

Hodnoty:

• Deactivate

• Aktivovat

DisplayClearScreenButton

Asks: ___ to clear the current patron from the screen on the circulation screen.

Hodnoty:

• Show print quick slip and clear buttons

• Show print slip and clear buttons

• Don’t show clear screen button

Default: Don’t show clear screen button

Popis:

• This system preference is used to display a small button in the corner of the checkout box to print either the quick slip or the slip, and go back to the main checkout page

  

ExportCircHistory

Asks: ___ the option to export patron checkouts.

Výchozí: Nezobrazovat

Hodnoty:

• Nezobrazovat

• Zobrazit

Popis:

• This system preference enables the option to export patrons‘ checkouts in MARC or CSV format.

Varování

Contrary to what its name suggests, this option is not available for the patrons‘ checkout history. It is only for current checkouts.

ExportRemoveFields

Asks: The following fields should be excluded from the patron checkout CSV or MARC (ISO 2709) export: ___

Popis:

• This space separated list of fields (e.g. 100a 245b) will automatically be excluded when exporting the patron’s current checkouts.

  

• This system preference requires that ExportCircHistory be enabled.

FilterBeforeOverdueReport

Výchozí: Nepožadovat

Asks: ___ staff to choose which checkouts to show before running the overdues report.

Popis:

• Výkaz překročených výpůjček ukazuje všechny překročené výpůjčky ve vašem knihovního systému. Pokud máte velký knihovní systém, budete chtít nastavit tuto předvolbu na „Vyžadovat“ a tak donutit ty co spouštějí sestavu, aby omezili údaje o pobočce, datumů, čtenářských kategorií, nebo použili jiné filtry. Požadavek, aby byla tato sestava filtrována má zabránit spuštění objemné sestavy, která zpomaluje další operace v systému.

  

Hodnoty:

• Nepožadovat

• Požadovat

FineNotifyAtCheckin

Výchozí: Neoznámit

Asks: ___ librarians of overdue fines on the items they are checking in.

Hodnoty:

• Neoznámit

• Upozornit

Popis:

• With this preference set to ‚Notify‘ all books that have overdue fines owed on them will pop up a warning when checking them in. This warning will need to acknowledged before you can continue checking items in. With this preference set to ‚Don’t notify,^ you will still see fines owed on the patron record, you just won’t have an additional notification at check in.

  

HoldsToPullStartDate

Výchozí: 2

Asks: Set the default start date for the Holds to pull list to ___ day(s) ago.

Popis:

• The Holds to Pull report in circulation defaults to filtering holds placed 2 days ago. This preference allows you to set this default filter to any number of days.

Povolit

Výchozí: Neumožnit

Asks: ___ the automatic use of a keyword catalog search if the phrase entered as a barcode on the checkout page does not turn up any results during an item barcode search.

Hodnoty:

• Neumožnit

• Umožnit

  

Popis:

• Sometimes libraries want to checkout using something other than the barcode. Enabling this preference will do a keyword search of Koha to find the item you’re trying to check out. You can use the call number, barcode, part of the title or anything you’d enter in the keyword search when this preference is enabled and Koha will ask you which item you’re trying to check out.

  Důležité

  While you’re not searching by barcode a barcode is required on every title you check out. Only titles with barcodes will appear in the search results.

itemBarcodeInputFilter

Výchozí: Nefiltrovat

Asks: ___ scanned item barcodes.

Hodnoty:

• Konvertovat z CueCat formátu

• Konvertovat z Libsuite8 formátu

• Nefiltrovat

• EAN-13 nebo nulami doplněný UPC-A formát

• Odstranit mezery z

• Odstranit první číslo z T-prefix stylu

  • Tento formát je běžný, mezi těmi knihovnami, které přecházení ze systému Follett

NoticeCSS

Asks: Include the stylesheet at ___ on Notices.

Důležité

Toto by měla být kompletní URL, začínající na http://

Popis:

• Pokud byste chtěli, aby vaše oznámení byly s ustálenou sadu fontů a barev, můžete použít toto nastavení a nasměrovat Koha na stylu speciálně pro vaše oznámení.

numReturnedItemsToShow

Výchozí: 20

Asks : Show the ___ last returned items on the checkin screen.

PatronAutoComplete

Asks: ___ to guess the patron being entered while typing a patron search for circulation or patron search. Only returns the first 10 results at a time.

Výchozí: Zkusit

Hodnoty:

• Zkusit

• Nezkusit

Popis:

• This system preference enables the auto-complete feature in the patron search in the Patrons and Circulation modules.

• Setting it to „Try“ would enable a staff member to begin typing a name or other value into the field and have a menu pop up with suggestions for completing it. Setting it to „Don’t try“ would disable this feature.

• This preference can make staff members‘ jobs easier or it could potentially slow down the page loading process.

  

previousIssuesDefaultSortOrder

Asks: Sort previous checkouts on the circulation page from ___ due date.

Výchozi: nejstarší k nejnovějšímu

Hodnoty:

• nejstarší k nejnovějšímu

• nejnovější k nejmladšímu

Popis:

• This system preference controls how you want the previous checkouts to appear in the patron’s checkout tab.

• If you choose ‚earliest to latest‘, the oldest checkout will be at the top.

• If you choose ‚latest to earliest‘, the most recent checkout will be at the top.

RecordLocalUseOnReturn

Výchozí: Nezaznamenávat

Asks: ___ local use when an unissued item is checked in.

Hodnoty:

• Nezaznamenávat

• Záznam

Popis:

• Pokud je tato předvolba nastavena na „Nenahrávat“ můžete nahrávat místní používání jednotek jako výpůjčky statistického čtenáře. S nastavením na „Nahrávat“, můžete nahrát místní výpůjčky na statistického čtenáře a / nebo vrácením knihy, která není v současné době vypůjčená.

ShowAllCheckins

Default: Do not show

Asks: ___ all items in the „Checked-in items“ list, even items that were not checked out.

Hodnoty:

• Nezobrazovat

• Zobrazit

Popis:

• When items that are not currently checked out are checked in they don’t show on the list of checked in items. This preference allows you to choose how you’d like the log of checked in items displays.

SpecifyDueDate

Asks: ___ staff to specify a due date for a checkout.

Výchozí: Povolit

Hodnoty:

• Zakázat

• Povolit

Popis:

• This preference allows for circulation staff to change a due date from the automatic due date, defined by circulation and fines rules, to another calendar date during checkout.

• This option would be used for circumstances in which the due date may need to be decreased or extended for any reason.

SpecifyDueDate

Výchozí: Nepovolit

Asks: ___ staff to specify a return date for a check in.

Hodnoty:

• Povolit

• Zakázat

Popis:

• This preference lets you decide if staff can specify an arbitrary return date when checking in items. If an arbitrary return date is specified then fines are recalculated accordingly.

todaysIssuesDefaultSortOrder

Asks: Sort today’s checkouts on the circulation page from ___ due date.

Výchozí: nejnovější po nejstarší

Hodnoty:

• nejstarší k nejnovějšímu

• nejnovější k nejmladšímu

Popis:

• This system preference controls how you want today’s checkouts to appear in the patron’s Checkout tab.

• If you choose ‚earliest to latest‘, the oldest checkout will be at the top.

• If you choose ‚latest to earliest‘, the most recent checkout will be at the top.

UpdateTotalIssuesOnCirc

Výchozí: Ne

Asks: ___ update a bibliographic record’s total issues count whenever an item is issued

Hodnoty:

• Ano

  Důležité

  This increases server load significantly; if performance is a concern, use the cron job to update the total issues count instead.

• Ne

Popis:

• Koha can track the number of times and item is checked out and store that on the item record in the database. This information is not stored by default. Setting this preference to ‚Do‘ will tell Koha to track that info every time the item is checked out in real time. Otherwise you could use the cron job to have Koha update that field nightly.

UseCirculationDesks

Asks: ___ circulation desks with circulation

Výchozí: Neužívat

Hodnoty:

• Nepoužívat

• Použít

Popis:

• This preference enables the ability to manage various circulation desks within a single library.

WaitingNotifyAtCheckin

Výchozí: Neoznámit

Asks: ___ librarians of waiting holds for the patron whose items they are checking in.

Hodnoty:

• Neoznámit

• Upozornit

  

Popis:

• Při příjmu knih můžete zvolit, zda má nebo nemá vyskočit upozornění pro čtenáře, který se vrátil knihu, že má rezervaci čekající na vyzvednutí. Pokud zvolíte hodnotu „Upozornit“ pro předvolbu WaitingNotifyAtCheckin pak pokaždé, když je nalezena rezervace pro čtenáře, který by měl knihu vyzvednout, a který vrací knihu, tak se objeví na vaší na obrazovce upozornění.

WaitingNotifyAtCheckout

Version

This system preference was introduced in Koha version 24.05.

Asks: ___ librarians of waiting holds for the patron whose items they are checking out.

Výchozí: Neoznámit

Hodnoty:

• Neoznámit

• Upozornit

Popis:

• This system preference is used to enable a pop-up in the circulation module alerting staff that the patron they are checking out items to also has holds waiting for them.

  

Poznámka

The pop-up currently appears after each checkout, even checkouts to the same patron.

Item bundles

BundleLostValue

Asks: Use the LOST authorized value ___ to represent ‚missing from bundle‘ at return.

Hodnoty:

• Values are from the LOST authorized value category

Default: Missing from bundle

Popis:

• This system preference is used when circulating item bundles to set the lost status of the item when it is missing from it’s bundle upon checkin.

• The default value for this preference is the ‚Missing from bundle‘ status in the default values for the LOST authorized value category. If you didn’t install the default values, make sure the system preference value refers to an actual lost status.

Výstraha

Prior to Koha version 23.11, you have to enter a numerical value in this system preference, representing a lost status in the LOST authorized values category.

BundleNotLoanValue

Asks: Use the NOT_LOAN authorized value ___ to represent ‚added to bundle‘ when an item is attached to bundle.

Hodnoty:

• Values are from the NOT_LOAN authorized value category

Default: Added to bundle

Popis:

• This system preference is used when creating item bundles, to set the not for loan status of the item when it is added to a bundle so that the item itself cannot be circulated by itself, but only as part as the bundle.

• The default value for this preference is the ‚Added to bundle‘ status in the default values for the NOT_LOAN authorized values category. If you didn’t install the default values, make sure the system preference value refers to an actual not for loan status (the status should be positive so that patrons cannot place holds on the bundled item).

Výstraha

Prior to Koha version 23.11, you have to enter a numerical value in this system preference, representing a not for loan status in the NOT_LOAN authorized values category.

Lost item policy

DefaultLongOverdueChargeValue

Asks: Charge a lost item to the borrower’s account when the LOST authorized value of the item changes to ___

Hodnoty:

• Values are from the LOST authorized value category

Default: none

Popis:

• Leave this field empty if you don’t want to charge the user for lost items. If you want the user to be charged, enter the LOST authorized value you are using in the DefaultLongOverdueLostValue preference.

• This preference is used when the longoverdue cron job is called without the –charge parameter.

Výstraha

Prior to Koha version 23.11, you have to enter a numerical value in this system preference, representing a lost status in the LOST authorized value category.

DefaultLongOverdueLostValue and DefaultLongOverdueDays

Asks: By default, set the LOST authorized value of an item to ___ when the item has been overdue for more than ___ days.

Values for DefaultLongOverdueLostValue:

• Values are from the LOST authorized value category

Default: none

Popis:

• These system preferences are used to enable the automatic overdue item loss process. Leave these fields empty if you don’t want to activate this feature.

• Setting the values to ‚Lost‘ and 30 for example will mark the item with the ‚Lost‘ status after the item is 30 days overdue.

• These system preferences are used when the longoverdue cron job is called without the --lost parameter.

• These system preferences allow users to set the values of the longoverdue cron without having to edit the crontab.

Výstraha

Prior to Koha version 23.11, you have to enter a numerical value in DefaultLongOverdueLostValue, representing a lost status in the LOST authorized value category.

DefaultLongOverdueSkipLostStatuses

Asks: When using the automatic item loss process, skip items with LOST values matching any of ___ .

Hodnoty:

• Values are from the LOST authorized value category

Default: none

Popis:

• This system preference works in conjunction with the DefaultLongOverdueLostValue and DefaultLongOverdueDays system preferences.

• When lost items are not marked as returned and if the library is using DefaultLongOverdueLostValue/DefaultLongOverdueDays or the long overdue cron job, they are still subject to the long overdue cron job. So an item that has already been marked as lost may automatically roll to ‚Long Overdue‘. A library may not want that lost value to change. This becomes especially important with the introduction of claims returned, which uses a variety of lost statuses.

• Leave this field empty if you don’t want to skip any lost statuses.

• Set to a list of comma separated values from the LOST authorized value category, e.g. 5,6,7.

IssueLostItem

Asks: When issuing an item that has been marked as lost, ___.

Hodnoty:

• zobraz zprávu

• požadovat informace

• nedělat nic

Výchozí: zobrazit zprávu

Popis:

• This system preference is used to define if and how staff members are notified that an item with a lost status is being checked out. If they are notified, they can change the status if necessary.

• If the system preference is set to ‚display a message‘, the item will be checked out, but there will be a message displayed reading ‚This item has been lost with a status of „X“.‘

  

• If the system preference is set to ‚require confirmation‘, the item will not be checked out and the staff member will have to click either ‚Yes, check out‘, or „No, don’t check out“ to confirm.

  

• If the system preference is set to ‚do nothing‘, the item will be checked out as normal without any notification to the status.

MarkLostItemsAsReturned

Asks: Mark items as returned when flagged as lost ___

Hodnoty:

• [Select All]

• from the ‚Holds to pull‘ list

• from the batch item modification tool

• from the items tab of the catalog module

• from the longoverdue cronjob

• when cataloging an item

• when marking an item as a return claim

• when receiving a payment for the item

Default:

By default, the following options are selected

• from the ‚Holds to pull‘ list

• from the batch item modification tool

• from the items tab of the catalog module

• from the longoverdue cronjob

• when cataloging an item

• when receiving a payment for the item

Popis:

• This system preference allows the library to choose which of these actions trigger the return of an item from the patron’s account when the item is marked as lost.

• If no option is selected, the lost item will stay checked out in the patron’s account.

UpdateItemLostStatusWhenPaid

Version

This system preference was added to Koha in version 24.05.

Asks: Update item status to ___ when the outstanding balance is paid.

Hodnoty:

• Values are from the LOST authorized value category

Default: none

Popis:

• This system preference can be used to automatically change the lost status of a lost item when the patron pays for the item.

• For example, if the system preference has the value ‚Lost and paid for‘, when a patron pays the replacement cost of the lost item, the item’s lost status will change to ‚Lost and paid for‘.

UpdateItemLostStatusWhenWriteoff

Version

This system preference was added to Koha in version 24.05.

Asks: Update item status to ___ when the outstanding balance is written off.

Hodnoty:

• Values are from the LOST authorized value category

Default: none

Popis:

• This system preference can be used to automatically change the lost status of a lost item if the patron’s charge is written off.

• For example, if the system preference has the value ‚Lost and paid for‘, when staff writes off the replacement cost of the lost item from a patron’s account, the item’s lost status will change to ‚Lost and paid for‘.

Patron restrictions

Povolit

Asks: When returning items ___ remove OVERDUES restriction triggered by sent notices.

Default: don’t

Hodnoty:

Version

Prior to version 23.11 of Koha, the options for this system preference were ‚do‘ or ‚do not‘. As of version 23.11, options were expanded to check for other checkouts in the patron’s account before lifting the restriction.

• don’t

• if patron has no remaining overdue items

• if patron has no remaining items that is cause for debarment

Popis:

• Using the Overdue Notice/Status Triggers you can restrict patrons after they receive an overdue notice. This preference lets you define whether Koha will automatically remove that restriction once the overdue items in question are returned or not.

• The difference between removing restriction when no remaining overdue items exists and doing so only when any of the items would result in debarment is that the latter option will respect possible grace periods of overdue rules also on returns and not only when generating overdue notices.

CumulativeRestrictionPeriods

Asks: ___ the restriction periods.

Default: Don’t cumulate

Hodnoty:

• Don’t cumulate

• Cumulate

Popis:

• This system preference controls whether or not restriction periods should be served concurrently or consecutively.

• If set to „Don’t cumulate“, the patron will be restricted only for the longest period. (For example, if a patron has a restriction of 10 days and another restriction of 15 days, they will be restricted for 15 days.)

• If set to „Cumulate“, the patron will be restricted for the sum of all the restriction period. (For example, if a patron has a restriction of 10 days and another restriction of 15 days, they will be restricted for 25 days.)

PatronRestrictionTypes

Asks: ___ the type of patron restriction to be specified when applying manually.

Výchozí: Nepovolit

Hodnoty:

• Povolit

• Zakázat

Popis:

• This preference allows staff the ability to pick a restriction type when adding a manual restriction to a patron.

RestrictionBlockRenewing

Výchozí: Povolit

Asks: If patron is restricted, ___ renewing of items from the staff interface and via the misc/cronjobs/automatic_renewals.pl cronjob.

Hodnoty:

• Povolit

• Blokovat

Popis:

• This preference affects all forms of renewals made from the staff interface and the automatic renewals cron job.

Recalls

The recalls feature allows users to recall items that are currently checked out.

RecallsMaxPickUpDelay

Asks: Mark a recall as problematic if it has been waiting to be picked up for ___ days.

Výchozí: 7

Popis:

• This system preference defines the number of days a user has to come pick up their recalled item.

• The recalls that have been awaiting pickup for more than this number of days will be highlighted in the circulation module.

• This preference is applied if there is no defined waiting period in the circulation rules.

UseRecalls

Asks: ___ recalls.

Výchozí: Neužívat

Hodnoty:

• Nepoužívat

• Použít

Popis:

• This is the main switch for the recalls feature.

• Make sure you configure circulation and fines rules for recalls once enabled.

Return claims

These system preferences are used by the return claims feature, where staff can mark checkouts as ‚claimed returned‘ when a patron says they returned an item, and track those claims.

AutoClaimReturnStatusOnCheckin

Version

This system preference was added to Koha in version 24.05.

Asks: Automatically resolve the claim and change the resolution to the RETURN_CLAIM_RESOLUTION authorized value ___ upon check in.

Hodnoty:

• Values are from the RETURN_CLAIM_RESOLUTION authorized value category

Default: none

Popis:

• This system preference is used to automatically resolve return claims when the item is checked in.

• If the system preference is empty, the feature is disabled and return claims must be resolved manually.

AutoClaimReturnStatusOnCheckout

Version

This system preference was added to Koha in version 24.05.

Asks: Automatically resolve the claim and change the resolution to the RETURN_CLAIM_RESOLUTION authorized value ___ upon check out.

Hodnoty:

• Values are from the RETURN_CLAIM_RESOLUTION authorized value category

Default: none

Popis:

• This system preference is used to automatically resolve return claims when the item is checked out.

• If the system preference is empty, the feature is disabled and return claims must be resolved manually.

ClaimReturnedChargeFee

Asks: When marking a checkout as „claims returned”,

Hodnoty:

• Ask if a lost fee should be charged (default)

• Charge a lost fee

• Don’t charge a lost fee

Popis:

• This preference allows a library to choose if a lost fee is charged at the time an item being claimed is returned. If set to ask, there is a checkbox to either charge or don’t charge per transaction. If set to charge, Koha will charge the patron the replacement price of the item. If set to don’t charge, Koha will not charge the patron.

ClaimReturnedLostValue

Asks: Use the LOST authorized value ___ to represent returns claims.

Hodnoty:

• Values are from the LOST authorized value category

Default: none

Popis:

• This system preference enables the return claims feature

• This will be the status assigned to items that have been claimed as returned.

Výstraha

Prior to Koha version 23.11, you have to enter a numerical value in this system preference, representing a lost status in the LOST authorized values category.

ClaimReturnedWarningThreshold

Asks: Warn librarians that a patron has excessive return claims if the patron has claimed the return of more than ___ items.

Popis:

• Enter a number if a library would like to set a limit to the number of returns claims that the patron can have before showing a warning on the patron’s screen.

CleanUpDatabaseReturnClaims

Asks: Remove resolved return claims older than ___ days.

Default: (empty)

Popis:

• This system preference is used to delete resolved return claims.

• This system preference requires the cleanup_database.pl cron job with the --return-claims parameter.

SIP2

SIP2AddOpacMessagesToScreenMessage

Version

This system preference was added to Koha in version 23.11.

Asks: ___ OPAC patron messages in the SIP2 screen message field.

Default: Send

Hodnoty:

• Neodesílat

• Odeslat

Popis:

• This system preference determines whether or not the OPAC messages are displayed on the screen when using SIP2.

• OPAC messages will be preceded by „Messages for you: „.

SIP2SortBinMapping

Asks: Use the following mappings to determine the sort_bin of a returned item.

Popis:

• This system preference is used to set the ‚sort bin‘ or CL response for SIP equipment when checking in an item. The mappings entered here will determine which bin the SIP sorter sends an item to.

• This system preference must be filled with a specific syntax.

  • Each mapping should be on its own line.

  • Each mapping should be of the form

    branchcode:item field:comparator:item field value:sort bin number
    

    where

    • ‚branchcode‘ is the library where the checkin is being performed (i.e. library assigned to the SIP user)

    • ‚item field‘ is a database column in the items table

    • ‚comparator‘ is the type of comparison, possible values are:

    • eq (is equal to)

    • < (is less than)

    • <= (is less than or equal to)

    • > (is greater than)

    • >= (is greater than or equal to)

    • ne (is not equal to)

    • ‚item field value‘ is the value to compare against the value in the specified ‚item field‘

      Poznámka

      Specifying ‚item field value‘ with a leading $ and an item field name will use the value of that field in the item for comparison.

      For example, $holdingbranch will compare the item field to the item’s homebranch.

    • ‚sort bin number‘ is the expected return value in the CL field of the SIP response for an item matching the rule.

Tip

The mappings will be taken into account in the order the lines are written, starting with the top one. Think carefully about the logic your mappings should follow and which order to write them in to achieve what you want.

Mapping examples

CPL:itype:eq:BOOK:1

This will return sort bin 1 for an item of itemtype code ‚BOOK‘ returned to the library with branchcode ‚CPL‘.

CPL:itemcallnumber:<:339.6:3

This will return sort bin 3 for an item with a callnumber less than 339.6 returned to the ‚CPL‘ library.

CPL:homebranch:ne:\$holdingbranch:X

This will return sort bin ‚X‘ for an item returned to CPL where the holdingbranch is not equal to the homebranch (i.e. any item belonging to a different library than ‚CPL‘).

Version

Before Koha version 23.11, each line can only have one ‚item field‘ mapping. From 23.11, each line can use multiple item fields mappings.

Having multiple item fields mappings allows for more refined sorting rules. For example, instead of only sorting by item type, a library may now sort by item type and collection code and not for loan status.

There is no limit on the number of item field mappings that can be used in one line.

CPL:itype:eq:BOOK:ccode:eq:TEEN:5

This will return sort bin 5 for an item with the itemtype code ‚BOOK‘ and the collection code ‚TEEN‘ returned to the library with branchcode ‚CPL‘.

Use case

Centerville Library (branchcode ‚CPL‘) has SIP equipment which sorts returned items into 4 bins.

• Bin number 1 is for CPL items to be shelved on floor 1 (items whose location code is ‚FLOOR1‘).

• Bin 2 is for CPL items to be shelved on floor 2 (items whose location code is ‚FLOOR2‘).

• Bin 3 is for CPL items that require specific attention, e.g. they need to be checked before shelving or they are part of a specific collection. The CPL stock team is currently recalling the floor 1 Parent collection using this bin.

• Bin 4 is solely for items that need to be transferred to other libraries (items whose homebranch is not CPL).

Here is the content of their SIP2SortBinMapping system preference.

# Items to be transferred go to bin 4

CPL:homebranch:ne:$holdingbranch:4

# CPL toys, special stock and Floor 1 parent collection go to bin 3

CPL:itype:eq:TOY:3

CPL:notforloan:>=:1:3

CPL:location:eq:FLOOR1:ccode:eq:PARENT:3

# Other floor 1 CPL stock to bin 1

CPL:location:eq:FLOOR1:1

# Floor 2 CPL stock to bin 2

CPL:location:eq:FLOOR2:2

Note that the mapping for bin 4 is at the top. This ensures that items to be transferred to other libraries are dealt with first; the next mappings will therefore only concern CPL items.

Comments are added to the preference by inserting a hash sign at the beginning of the comment line.

UseLocationAsAQInSIP

Asks: Use ___ for AQ field in SIP protocol.

Default: homebranch

Hodnoty:

• homebranch

• permanent_location

Popis:

• This system preference allows you to decide which item information is used as the AQ response for SIP equipment.

• AQ is used in automated sorting bins, for example, as the item’s ‚permanent location‘. For some libraries, that might mean the item’s home library, whereas for others it might mean the item’s permanent location.

Self check-in module (sci-main.pl)

SelfCheckInMainUserBlock

Výstraha

This system preference no longer exists in Koha version 23.11 and above. It has been moved to HTML customizations.

Asks: Include the following HTML on the self check-in screen

Popis:

• HTML entered in this field will appear in the center of the main page of your self checkin screen

SelfCheckInModule

Výchozí: Neumožnit

Asks: ___ the standalone self check-in module (available at: /cgi-bin/koha/sci/sci-main.pl

Hodnoty:

• Neumožnit

• Umožnit

Popis:

• This system preference will activate (or deactivate) the self check- in module

SelfCheckInTimeout

Výchozí: 120

Asks: Reset the current self check-in screen after ___ seconds

Popis:

• Enter the number of seconds after which you want the self check-in screen to refresh and go back to the main page (for example, if a patron forgot to log out).

SelfCheckInUserCSS

Asks: Include the following CSS on all the self check-in screens

Popis:

• The CSS code entered here will override any CSS on the self check-in screens

SelfCheckInUserJS

Asks: Include the following JavaScript on all the self check-in screens

Popis:

• The JavaScript entered here will override any other JavaScript on the self check-in screens

Self check-out module (sco-main.pl)

AutoSelfCheckAllowed, AutoSelfCheckID and AutoSelfCheckPass

Důležité

Most libraries will want to leave this set to ‚Don’t allow‘. This preference turns off the requirement to log into the self checkout machine with a staff username and password by storing the username and password for automatic login.

Asks: ___ the web-based self checkout system to automatically login with this staff login ___ and this password ___.

AutoSelfCheckAllowed default: Don’t allow

AutoSelfCheckAllowed values:

• Povolit

• Zakázat

AutoSelfCheckID value:

• The username of a staff patron with the self_checkout_module permission.

AutoSelfCheckPass value:

• The password of a staff patron with the self_checkout_module permission.

Varování

The patron whose credentials are entered here must be a patron created specifically for this purpose. They will be unable to log into the OPAC.

SCOAllowCheckin

Asks: ___ patrons to return items through web-based self checkout system.

Výchozí: Nepovolit

Hodnoty:

• Povolit

• Zakázat

Popis:

• This preference is used to determine if you want to allow patrons to return items through your self check machines. By default, Koha’s self check-out interface is simply for checking items out.

SCOBatchCheckoutsValidCategories

Version

This system preference was added to Koha in version 24.05.

Asks: Patron categories allowed to check out in a batch while logged into the self checkout system: ___

Hodnoty:

• Values are the patron categories; multiple categories can be selected.

Default: none

Popis:

• This system preference is used to determine which patron categories are allowed to use batch checkout in the self checkout system.

• If this system preference is empty, no one can batch checkout through the self checkout system. Checkouts must be done one at a time.

Poznámka

The BatchCheckouts and WebBasedSelfCheck system preferences must be enabled for this system preference to have any effect.

See also:

• WebBasedSelfCheck

• BatchCheckouts

• BatchCheckoutsValidCategories

SCOLoadCheckoutsByDefault

Version

This system preference was added to Koha in version 23.11.

Asks: ___ the patron’s list of current checkouts by default when they log in to the self checkout module.

Výchozí: Zobrazit

Hodnoty:

• Nezobrazovat

• Zobrazit

Popis:

• This system preference determines whether the patron’s current checkouts are displayed by default when they log into the self checkout module.

• In libraries where the self checkout machine is in a highly visible location, having the current checkouts hidden by default will protect the patron’s privacy.

• Patrons will have the option to see their current checkouts with the ‚Load your checkouts‘ button.

SCOMainUserBlock

Výstraha

This system preference no longer exists in Koha version 23.11 and above. It has been moved to HTML customizations.

Asks: Include the following HTML on the web-based self checkout screen:

Popis:

• The HTML entered in this preference will be used on the main self check-out screen.

SCOUserCSS

Asks: Include the following CSS on all pages in the web-based self checkout:

Popis:

• The CSS entered in this preference will be used on all of your Koha self check-out screens.

SCOUserJS

Asks: Include the following JavaScript on all pages in the web-based self checkout:

Popis:

• The JavaScript entered in this preference will affect all of your Koha self check-out screens.

SelfCheckAllowByIPRanges

Asks: Allow access to the self check from the following IP addresses: ___

Popis:

• This system preference is used to limit access to the self check-out module by IP ranges.

• Use ranges or simple IP addresses separated by spaces, like ‚192.168.1.1 192.168.0.0/24‘.

• If you do not want to limit access by IP range, leave this system preference blank.

SelfCheckHelpMessage

Výstraha

This system preference no longer exists in Koha version 23.11 and above. It has been moved to HTML customizations.

Asks: Include the following HTML in the Help page of the web-based self checkout system:

Popis:

• Clicking the ‚Help‘ link in the top right of the self check-out interface opens up a three step process for using the self check-out module. Adding HTML to this system preference will show that additional help text above what’s already included.

SelfCheckoutByLogin

Asks: Have patrons login into the web-based self checkout system with their ___.

Default: Username and password

Hodnoty:

• cardnumber

• username and password

Popis:

• This preference lets you decide how your patrons will log in to the self checkout module. Either the patron’s card number (barcode) or their username and password (the OPAC/Staff interface login username and password fields in the patron record).

Varování

If using ‚cardnumber‘ and AutoSelfCheckAllowed, you should set SelfCheckAllowByIPRanges to prevent brute force attacks to gain patron information outside the library.

Stvrzenka o selfchecku

Asks: ___ the print receipt popup dialog when self checkout is finished.

Výchozí: Zobrazit

Hodnoty:

• Nezobrazovat

• Zobrazit

Popis:

• This preference controls whether a prompt shows up on the web based self check-out when the patron clicks the ‚Finish‘ button.

SelfCheckTimeout

Asks: Time out the current patron’s web-based self checkout system login after ___ seconds.

Výchozí: 120

Popis:

• Po nečinnosti zařízení po dobu uvedenou v této předvolbě odhlásí samoobslužný výpůjční systém přihlášeného čtenáře a vrátí se na úvodní obrazovku.

ShowPatronImageInWebBasedSelfCheck

Asks: ___ the patron’s picture (if one has been added) when they use the web-based self check-out.

Výchozí: Nezobrazovat

Hodnoty:

• Nezobrazovat

• Zobrazit

Popis:

• If this system preference is set to ‚Show‘, the patron will see their own picture when logging into the web-based self check-out module.

WebBasedSelfCheck

Asks: ___ the web-based self checkout system.

Výchozí: Neumožnit

Hodnoty:

• Neumožnit

• Umožnit

Popis:

• Enabling this preference will allow access to the self check-out module in Koha.

• Your self check-out module is available at: https://YOUR.OPAC.URL/cgi-bin/koha/sco/sco-main.pl

Stock rotation module

StockRotation

Asks: ___ the stock rotation module

Výchozí: Nepovolit

Hodnoty:

• Vypnout

• Umožnit

Popis:

• If set to ‚Enable‘, the stock rotation module will appear under Cataloging > Automation.