Výpůjčky

Výpůjčky jsou přístupné několika způsoby. Na hlavní stránce intranetu se nachází několik přímých odkazů pro půjčování, vracení a přesun jednotek. Pro úplný výpis funkcí modulu Výpůjčky přejděte na na stránku Výpůjčky. Odkaz na ni se nachází zcela vlevo nahoře na každé stránce a také v obsahu hlavní stránky intranetu.

Before circulating your collection you will want to set your Global system preferences, Basic parameters and Patrons and circulation rules.

V modulu výpůjčky můžete také snadno přecházet mezi záložky pod vyhledávacím políčkem pomocí klávesových zkratek:

  • hledání v katalogu: Alt+Q

  • skok na výpůjčku Alt+U

    • toto nebude fungovat u uživatelů Mac

  • vracení: Alt+R

    Poznámka

    Uživatelé Mac používají OPTION namísto ALT

Check out (issuing)

Chcete-li začít proces výpůjčky, musíte zadat čárový kód čtenáře nebo část jeho jména. Možnost výpůjčky se objeví ve třech hlavních místech:

  • Volba Výpůjčky nahoře hlavní stránky služebního intranetu

    image482

  • Volba výpůjčka na liště rychlého vyhledání na stránce výpůjček

    image484

Those two options allow you to search for a patron either by card number, name, user ID, email, etc. If you only have one result, Koha will automatically go to the patron’s file. If your search gives you more than one result, it will ask you to choose which patron you want to check out to.

image1494

Poznámka

  • You can customize the columns of this table in the ‚Table settings‘ section of the Administration module- Under Circulation Tab (table id: table_borrowers)

  • Check mark which columns to hide by default, uncheck columns that should display.

Add new CSV profile form filled with MARC information

  • Výpůjční možnosti ze záznamu čtenáře

    image483

  • If you have enabled batch checkouts then click the batch check out option on the patron record

    image1254

Checking items out

Chcete-li vypůjčit některý výtisk čtenáři, vyhledejte nejdříve čtenáře pomocí jedné z mnoha voleb uvedených výše. Poté se objeví obrazovka vypůjčení.

Checkout screen with checkouts hidden

Pokud je zvoleno nastavení ‚Vždy ukázat výpůjčky automaticky‘ pak uvidíte seznam výpůjček níže v poli výpůjčky.

Checkout screen with checkouts displayed

Poznámka

The previousIssuesDefaultSortOrder system preference controls in which order these previous checkouts appear (earliest to latest, or latest to earliest).

Poznámka

You can customize the columns of this table in the ‚Table settings‘ section of the Administration module (table id: issues-table).

At the top of the check out screen is a box for you to type or scan the item’s barcode into.

Důležité

Many modern barcode scanners will send a ‚return‘ to the browser, making it so that the ‚Check out‘ button is automatically clicked

  • If the barcode is not found you will be prompted to use fast cataloging to add the item. Learn more about fast cataloging later in this manual.

  • If you have itemBarcodeFallbackSearch set to ‚Enable‘, then you can enter a keyword search in this box instead of just a barcode (this will make it possible to check out using title and/or call number).

  • If you have AutoSwitchPatron set to ‚Enable‘, scanning a patron barcode here will take you to that patron’s file.

To see more checkout options click the ‚Checkout settings‘ link to expand the checkout area.

Checkout box with checkout settings section opened

Pod políčkem pro zadávání čárových kódů se může nacházet možnost nastavit datum vrácení ručně a nikoliv podle předdefinovaných pravidel.

  • This option will only appear if you have set the SpecifyDueDate system preference to allow staff to override the due date

Below the box for the barcode you will see a checkbox for ‚Automatic renewal‘. This will allow this item to automatically renew if the appropriate cron job is running and there are no holds on the item.

Next is an option to not decrease the loan length based on holds. This overrides the decreaseLoanHighHolds system preference.

If you’re allowing the checkout of items on site to patrons (these are usually items that are not for loan that you would like to check for in library use) then you will see the ‚On-site checkout‘ checkbox after clicking the ‚Checkout settings‘ link to expand your circulation options.

Checkout box with checkout settings section opened and 'Automatic renewal' option selected

At the bottom of the page there is a summary of the patron’s current checked out items along with the due date (and time if the item is an hourly loan). Items checked out today will appear at the top.

Poznámka

Items that are hourly loan items will include the time with the due date.

Table of patron's current checkouts

Pokud jste vypůjčili jednotku pouze prezenčně, bude na přehledu výpůjček označena červenou barvou.

Section of the patron's current checkouts table showing only onsite checkouts

Poznámka

The todaysIssuesDefaultSortOrder system preference controls in which order these new checkouts appear (earliest to latest, or latest to earliest).

The ‚Export‘ button at the top of the table allows you to export the patron’s current checkouts in either Microsoft Excel or CSV format, or even copy or print their checkouts.

Export checkouts options (Excel, CSV, copy or print)

Also at the bottom of the page is the list of items the patron has on hold.

Table of patron's current holds

If you have the SuspendHoldsIntranet system preference set to ‚allow‘, you can suspend or resume patrons holds using the options at the bottom of the holds list .

Poznámka

If you have your AutoResumeSuspendedHolds system preference set to „Don’t allow“, you will not have the option to put an end date on the hold suspension

Pokud jsou vloženy nějaké zprávy týkající se čtenáře, zobrazí se vpravo od políčka pro půjčování.

Checkout box with notes and messages next to it

If the patron has a hold waiting at the library, that too will appear to the right of the check out box making it easy for the circulation staff to see that there is another item to give to the patron.

Checkout screen with a hold waiting message next to the checkout box

The details of the checkouts will appear on the record detail page in the staff client as well.

Item table in a record detail page showing which items are checked out and to whom

Printing receipts

Pokud jste čtenáři půjčili všechny položky, můžete vytisknout potvrzení zvolením jedné ze dvou metod.

If you have the CircAutoPrintQuickSlip preference set to ‚open a print quick slip window‘ you can simply hit enter on your keyboard or scan a blank piece of paper with your barcode scanner. The idea being that you’re „checking out“ a blank barcode which triggers Koha to print the ‚Quick slip.‘

Můžete také klepnout na tlačítko Tisk v horní části obrazovky a vybrat „Tisk lístku“ nebo „Tisk rychlého lístku“.

image494

Pokud vyberete ‚Tisk‘ -> ‚Všechny výpůjčky‘, budou vytištěny všechny aktuální výpůjčky čtenáře. Pokud vyberete ‚Tisk‘ -> ‚ Dnešní výpůjčky‘, budou vytištěny pouze dnešní výpůjčky.

‚Print summary‘ will generate a full page summary for the patron’s circulation information and ‚Print overdues‘ will print out a slip that lists all items that are overdue.

What prints on the slips can be customized by altering the slip templates under the Notices & slips tool.

Clear patron information

When you’re done checking an item out if you have the DisplayClearScreenButton preference set to ‚Show‘ you can clear the current patron by clicking the X in the top right of the patron’s info to remove the current patron from the screen and start over.

image495

If you have the CircAutoPrintQuickSlip preference set to ‚clear the screen‘ then you simply need to hit enter or scan a blank barcode and the screen will be cleared of the current patron.

Batch checkouts

If you would like to perform a batch check out you can do so by turning on the BatchCheckouts system preference and assigning the proper patron categories via the BatchCheckoutsValidCategories preference. This will allow you to use an RFID pad that reads multiple barcodes or perform a batch check out for training internal use.

image1257

From this screen you can scan several barcodes or load a file of barcodes. If those items cannot be checked out they will provide a warning on the following screen

image496

If you are using a statistical patron type then you’ll see that local use was recorded for each item you scanned.

image497

Check out messages

Pokud půjčujete jednotku, která má v podpoli 3 pole 952 (nebo jiného pole, které používáte pro záznam jednotek) uvedeny další součásti (přílohy), objeví se zpráva, která Vás na to upozorní.

image498

Jsou chvíle, kdy Koha zabrání knihovníkovi půjčit čtenáři výtisky. Když se to stane, objeví se varování oznamující knihovníkovi důvody, proč čtenář nemůže mít další výpůjčky.

  • Čtenář dluží příliš mnoho pokut

    image499

    • You can set the amount at which patron checkouts are blocked with the noissuescharge system preference

  • Patron has a restriction on their account

    image500

    • This can be set by the librarian editing a patron record and adding a restriction or by the Overdue/Notice Status Triggers

    • Pokud má zaměstnanec správné oprávnění, mohou toto omezení dočasně přehlížet

      image501

  • Čtenář potřebuje potvrdit svoji adresu

    image502

    • To může nastavit knihovník úpravou čtenářova záznamu a přidání ` příznak <#patronflags>`__

  • Čtenář ztratil svoji průkazku (kartu)

    image503

    • To může nastavit knihovník úpravou čtenářova záznamu a přidání ` příznak <#patronflags>`__

Check out warnings

Někdy se může stát, že půjčování vyvolá varovnou zprávu, která se objeví ve žlutém rámečku ještě nad políčkem pro půjčování. Tato varování je třeba odsouhlasit předtím, než budete pokračovat v půjčování.

  • Čtenář má neuhrazené platby

    image504

  • Jednotka je rezervována pro jiného čtenáře

    image505

  • Jednotka by měla být v regálu s rezervacemi připravená pro jiného čtenáře

    image506

  • Tuto jednotku už má čtenář vypůjčenou

    image507

  • Jednotku má půjčenou jiný čtenář

    image508

    • This warning will allow you to place a hold on the item for the patron you’re trying to check it out to.

  • Jednotku nelze vypůjčit

    image509

  • Patron has too many things checked out and AllowTooManyOverride is set to ‚Allow‘

    image510

  • Patron has too many things checked out and AllowTooManyOverride is set to „Don’t allow“

    image511

  • Jednotka nemůže být proudložena

    image512

  • Čárový kód nebyl nalezen

    image513

  • Vypůjčená jednotka je označena jako ztracená

    • Depending on the value in your IssueLostItem preference, you may just see a warning

      image514

      nebo potvrzovací políčko

      image515

  • Půjčovaná jednotka není doporučená pro čtenáře tohoto věku

    image516

  • Item being checked out meets the decreaseLoanHighHolds system preference criteria

    image517

Prodlužování

Checked out items can be renewed (checked out for another period of time) based on your circulation rules and renewal preferences.

If you allow it, patrons can renew their own items via the OPAC, but sometimes you’ll need to help them by renewing their items via the staff client.

Tuto jednotku má vypůjčenou jiný čtenář. %s Vrátit a vypůjčit? %s

The first is to visit their details page or checkout page and review their checkout summary at the bottom.

image518

In the Renew column you will see how many times each item has been renewed and a checkbox to renew the item for the patron. Check the boxed of the items you would like to renew and click the ‚Renew or return checked items‘ button, or to renew all items checked out to the patron simply click the ‚Renew all‘ button.

image519

Sometimes renewals will be blocked based on your circulation rules, to override this block you must have your AllowRenewalLimitOverride preference set to ‚Allow‘. If you allow renewal limit overrides, you will see a checkbox at the bottom left of the circulation summary. Check that box and then choose the items you would like to renew.

image520

Zaškrtnutím tohoto políčka, budou přidány zaškrtávací políčka do sloupce prodloužení tam, kde jednotku dříve nešlo prodloužit.

Stránka „Vrátit“ pod Výpůjčním menu

image521

Naskenujte nebo vypiště čárový kód položky, kterou chcete přesunout

image522

Hned po načtení souboru se zobrazí potvrzující zpráva.

image523

Pokud vyberete ‚Zavřít‘, zobrazí se formulář.

image524

Jakmile je jednotka vypůjčena, objeví se pod informacemi o čtenáři.

image525

Check in (returning)

Vraácení vytisků je možné z různých míst

  • Zaškrtávací políčko v horní části hlavního intranetu

    image526

  • Možnost vrácení na liště rychlého vyhledání na stránce výpůjček

    image527

  • Odkaz na vrácení výpůjčky z přehledu čtenářových výpůjček (a na stránce přeled výpůjček)

    image528

  • Stránka „Vrátit“ pod Výpůjčním menu

    image529

Checking items in

Chcete-li vrátit výtisk, sejměte čárový kód výtisku v návratové schránce. Přehled všech vrácených výtisků se objeví pod návratovou schránkou.

image530

Poznámka

  • You can customize the columns of this table in the ‚Table settings‘ section of the Administration module (table id: checkedintable).

Pokud chcete provádět vracení jednotek, které byly vloženy do biblioboxu, zatímco knihovna byla uzavřena, můžete zaškrtnout políčko „Vracení knih z biblioboxu“. Systém pak nastaví jako datum vrácení předchozí otevírací den knihovny.

  • This requires that you have your closings added to the calendar tool

Můžete také zvolit možnost odpuštění všech poplatků za pozdní vrácení jednotek zaškrnutím ‚Odpustit upomínky‘ ještě před začátkem skenování kódů.

If you have the SpecifyReturnDate preference set to ‚Allow‘ you will be able to arbitrarily set the return date from below the check in box.

image1258

Check in messages

Při vracení jednotek se můžou zobrazit následující zprávy:

  • Pokud vracíte jednotky v knihovně, jiné než v domácí pobočce, zobrazí se zpráva s dotazem zda převést knihu do domácí knihovny

    image531

    • Po vrácení této jednotky se její stav v katalogu změní na „na cestě“

      image532

    • Chcete-li mít označenou jednotku jako zpátky na domácí pobočce, vracejte jednotky v domovské pobočce

      image533

      • Objeví se zpráva, že výtisk není vypůjčen, ale status v katalogu bude změněn na „dostupné“. Tento krok je nezbytný k označení výtisku jako přijatého domovskou knihovnou.

  • Pokud přijímáte výtisk, který by měl mít několik částí, zobrazí se zpráva informující vás o počtu kusů, který byste měli mít v ruce

    image534

  • Pokud přijímáte jednotku, která má rezervace, budete vyzváni k potvrzení rezervace

    image535

    • Kliknutím na tlačítko „Potvrdit rezervaci“ se označí výtisk jako čekající na vyzvednutí z knihovny

      image536

    • Clicking the ‚Print slip and confirm‘ button will mark the item as waiting for pickup at the library and present the library with a receipt to print and place on the book with the patron’s information

    • Ignorování rezervace ponechá rezervaci na výtisku, ale ponechá jeho status „Dostupný“ (což ale neruší rezervaci)

  • Pokud přijímáte jednotku, která má rezervaci v jiné pobočce, budete vyzváni k potvrzení a přepravy jednotky

    image537

    • Clicking the ‚Confirm hold and transfer‘ button will mark the item as in transit to the library where the hold was placed

      image538

    • Clicking the ‚Print slip, transfer and confirm‘ button will mark the item as in transit to the library where the hold was placed and present the library with a receipt to print and place on the book with the patron’s information

    • Ignorování rezervace ponechá rezervaci na výtisku, ale ponechá jeho status „Dostupný“ (což ale neruší rezervaci)

  • If you have the system showing you fines at the time of checkin (FineNotifyAtCheckin) you will see a message telling you about the fine and providing you a link to the payment page for that patron

    image539

Circulation messages

Jedná se o krátké zprávy, které mohou knihovníci nechat pro čtenáře, nebo pro své kolegy a objeví se při práci s modulem Výpůjčky.

Setting up messages

Circulation messages are set up as authorized values. To add or edit circulation messages you want to work with the BOR_NOTES value.

image540

The ‚Description‘ field can hold a canned message that you would like to appear on the patron’s record.

Důležité

Pole „Popis“ je omezeno na 80 znaků, ale pole zprávy pro čtenáře pojme více. Zadejte 80 znaků do pole Popis a zbytek zadejte do čtenářova záznamu.

Adding a message

When on the patron’s check out tab you will see a link to ‚Add a new message‘ to the right of the check out box and a button at the top to ‚Add message‘.

image541

When you click either of these options you will be asked to choose if the message is for the librarians or the patron and the message you would like to leave.

image542

Poznámka

Zpráva pro čtenáře se také zobrazí knihovníkům.

Viewing messages

Zprávy o výpůjčkách jsou určené pro zaměstnance a/nebo čtenáře a objeví se na čtenářově výpůjční obrazovce vpravo výpůjčního políčka. Zprávy vypsané tučně a červeně jsou určeny jen pro pracovníky knihoven, zatímco zprávy v pravidelných kurzívních písmech jsou určeny pro čtenáře i knihovníka.

image543

Výpůjční zprávy určené pro čtenáře se také objeví, když se přihlásíte do OPACu.

image544

Rezervace

Koha allows patrons to put things on hold. A ‚Hold‘ is a way to reserve an item. Depending on your circulation and fines rules and hold preference settings patrons will be able to place items on hold for pickup at the library at a later date/time.

Placing holds in staff client

There are several ways to place holds from the staff client. The most obvious is using the ‚Place hold‘ button at the top of any bibliographic record.

image545

You can also click the smaller ‚Place hold‘ link found at the top of your catalog search results, or the ‚Holds‘ link found below each result.

image546

Budete požádáni o vyhledání čtenáře čárovým kódem nebo jeho libovolnou částí jeho jména, aby se zahájil proces rezervace.

image547

Pokud byste chtěli nejdřív hledat čtenáře a pak bibliografický záznam pro rezervaci, můžete otevřít čtenářův záznam a klikněte na tlačítko „Vyhledat rezervace“ v horní části čtenářova záznamu.

image548

Po kliknutí na tlačítko se dostanete na stránku vyhledávání v katalogu, kde můžete najít knihu/y, které chcete zarezervovat. Pod každým názvem ve výsledcích uvidíte možnost „Rezervovat pro uživatele“.

image549

Pokud chcete umístit rezervaci na více výtisků, jednoduše zaškrtněte políčka nalevo od nich, a klepněte na šipku vpravo od tlačítka „Zadat rezervaci“.

image550

Podle množství jednotek, na které chcete najednout zadat rezervaci se vám zobrazí příslušný formulář. Pokud zadáváte rezervaci na jeden záznam, zobrazí se seznam všech jednotek, které můžete rezervovat.

image551

  • Zadejte poznámky, které platí pro tuto rezervaci

  • Vyberte knihovnu, ve které si uživatel vyzvedne jednotku

  • If you have the AllowHoldItemTypeSelection preference set to ‚Allow‘ and the record had more than one item type attached you will see an option to choose to limit the hold to a specific item type

    image1259

  • Pokud čtenář podat rezervaci, která začne platit až jiný den než dnes, zadejte to v poli „Rezervace začíná od“

  • Pokud čtenář uvedl, že už nechce jednotku po určitém datu, nebo máte-li limity rezervací na délku rezervace, můžete zadat datum vypršení platnosti rezervace v poli „Rezervace až do data“

    • To have expired holds cancelled automatically you will need to have the Expired holds cron job set to run on a regular basis.

  • Dále zvolte, zda chcete umístit rezervaci na další dostupný výtisk nebo na určitý výtisk klepnutím na přepínač vedle jednotlivých výtisků.

Pokud dáváte rezervace na více výtisků, objeví se vám další dostupné výběry pro všechny tituly. Pokud žádné výtisky nejsou jsou k dispozici pro rezervace, bude to zobrazeno na obrazovce pro potvrzení.

image552

Once your hold is placed, if you’d like to have Koha forget that you used the ‚Search to hold‘ function, you can choose to have Koha ‚forget‘ the patron’s name by clicking the arrow to the right of the ‚Place hold‘ button on the search results and choosing the ‚Forget‘ option.

image553

Managing holds

Holds can be altered and cancelled from the holds tab found on the left of the bibliographic record.

image554

Ze seznamu rezervací můžete změnit pořadí rezervací, místo vyzvednutí, pozastavit a/nebo zrušení rezervace.

image555

Poznámka

If you have your AutoResumeSuspendedHolds preference set to „Don’t allow“ then you will not have the option to put an end date on the hold suspension.

Poznámka

If you have your AllowHoldDateInFuture preference set to „Don’t allow“ you will not have the option to edit the date the hold was placed (the column labelled Date).

Poznámka

If you have the HoldsSplitQueue system preference set you will see the holds list split across different tables by either pickup library, itemtype or both.

Poznámka

Depending on how you have your HidePatronName system preference set the list may show card numbers instead of names in the patron column like in the image above.

Chcete-li změnit nebo odstranit vlastní rezervace, stačí provést výběr z roletky „Priority“nebo klepnutím na šipky vpravo od Roletky „Priority“.

image556

Pokud roletku priorit na přeskupení nebo odstranění rezervací, musíte kliknout na tlačítko „Aktualizovat rezervace“, aby se změny uložily.

Klepnutím na šipku dolů napravo od rezervací podrží rezervaci v dolní části seznamu, i když je dáno více pořadavků.

Např. vaše knihovna má domovské čtenáře, kteří jsou oprávněni držet výpůjčky po celé měsíce. To by nebylo spravedlivé vůči jiným čtenářům, pokud by domovský čtenář by mohl si vypůjčit zbrusu novou knihu a mít jí několik měsíců. Z tohoto důvodu by žádosti domovských čtenářů zůstaly na konci fronty, dokud všichni ostatní, kteří si chtěli knihu přečíst, tak již neučinili.

image557

If a patron asks to have their hold suspended and you have the SuspendHoldsIntranet system preference set to ‚allow‘ you can do so by clicking the ‚Suspend‘ button to far right. If the patron gives you a date for the items to become unsuspended you can enter that in the date box and click the ‚Update hold(s)‘ button to save your changes.

image558

Chcete-li odstranit nebo zrušit rezervaci klikněte na červený křížek vpravo v řádku frezevace. Chcete-li hromadně odstranit/zrušit rezervace, můžete vybrat „del“ z rozbalovacího menu vlevo od každého řádku a potom klepněte na tlačítko „Aktualizovat rezervace“ v dolní části seznamu.

image559

If your library uses the patron clubs feature, use the clubs tab to place a hold for a club. To place a hold for a club, click the clubs tab, search for and select the club name, and click the ‚Place hold‘ button.

image1460

Receiving holds

When items that are on hold are checked in or out the system will remind the circulation librarian that the item is on hold and offer them options for managing the hold.

Když přijímáte jednotku, na kterou je rezervace, systém vás požádá, abyste buď potvrdili a přepravili jednotku

image560

nebo jen potvrdit rezervaci

image561

Clicking the ‚Confirm‘ button will mark the item as on hold for the patron. If the item needs to be transferred the item will also be marked as in transit to the proper branch. Clicking ‚Ignore‘ will retain the hold, but allow you to check the item out to another patron. Choosing to confirm and print will present you with a printable page that you can slip inside the book with the necessary hold and/or transfer information.

Hned po potvrzení se rezervace zobrazí ve Čtenářském záznamu a na zobrazení výpůjček pod záložkou Rezervace

Table of patron's current holds

From here if the patron would like you suspend their holds you can do so one by one or in bulk.

Záznam výtisku také ukazuje, že výtisk je rezervován.

image563

Může se stát, že někým rezervovanou jednotku přijde danému čtenáři vypůjčit jeho rodinný příslušník. V tomto případě je potřeba se před vypůjčením jednotky někomu jinému ujistit, že byla původní rezervace zrušena. Pokud se budete pokoušet vypůjčit jednotku, která je již někým rezervována, objeví se varování.

image564

Zde můžete půjčovat jednotky u pultu a rušit čtenářské rezervace.

Přesuny

Pokud pracujete v knihovně s několika obočkami, můžete přesunout jednotku z jedné knihovny do druhé za použití Přesunovacího nástroje. K přesunu jednoty

  • Get there: Circulation > Transfer

Přepravit jednotku

  • Kliknněte na „Přeprava“ na stránce výpůjček

    image565

    • Zadejte knihovnu, do které chcete jednotku převést

    • Naskenujte nebo vypiště čárový kód položky, kterou chcete přesunout

  • Klikněte na tlačítko ‚Odeslat‘

    image566

  • Výtisk nyní ohlašuje, že je „na cestě“

    image567

  • Pokud jednotka dorazí do jiné pobočky, knihovník musí jednotku přijmout a stvrdit, že již není „v přepravě“

  • Jednotka nebude neustále stěhována do nové pobočky

    image568

    • The item shows the same ‚Home library‘ but has updated the ‚Current location‘ to note where it resides at this time

Set library

By default you will enter the staff client as if you are at your home library. This library will appear in the top right of the staff client.

image569

Jedná se o knihovnu, kde probíhají všechny výpůjčky. Pokud jste na připojeni do jiné knihovny, budete se muset nastavit na vaší knihovnu před výpůjčkou. Pro to klikněte na „Nastavit“ v pravém horním rohu na stránce výpůjček.

image570

Hned po uložení vašich změn se nahoře vpravo objeví nová Knihovna.

Fast add cataloging

Sometimes circulation librarians need to quickly add a record to the system for an item they are about to check out. This is called ‚Fast add‘. To allow circulation librarians access to the Fast add cataloging tool, simply make sure they have the fast_cataloging permissions. There are two ways to add titles via fast add. If you know that you’re about to check out an item that isn’t in you catalog you can go to the Circulation module and click ‚Fast cataloging.‘

image571

katalogizační interfejs se otevře s krátkým katalogizačním záznamem:

image572

Po přidání Vašich katalogizačních údajů budete vyzváni k zadání údajů o jednotce. Vložte čárový kód jednotky, kód sbírky, atd. a jednotku před jejím půjčováním uložte.

Jiný způsob k rychlé katalogizaci je z obrazovky výpůjček. Zadáte-li čárový kód, která Koha nemůže najít, vyzve vás k použití rychlé katalogizace, pro přidání výtisku do Koha abyste ho mohli půjčit.

image573

Kliknutím na tlačítko ‚Rychlá katalogizace‘ se dostanete k formuláři rychlé katalogizace, kde můžete vložit informace o titulu

image574

Po kliknutí na ‚Uložit‘ se Vám otevře záznam jednotky, kde již bude vyplněn čárový kód, který jste předtím zadali.

image575

Po kliknutí na tlačítko „Přidat jednotku“, bude tato jednotka automaticky půjčena uživateli, kterému jste se ji původně zkoušeli vypůjčit.

image576

Circulation reports

Most reports can be found via the Reports module, but some of the more common circulation reports are available right from the Circulation module.

  • Get there: Circulation > Circulation reports

Holds queue

This report will show you all holds waiting to be pulled off the shelf at your library.

image577

Poznámka

  • You can customize the columns of this table in the ‚Table settings‘ section of the Administration module (table id: holds-table).

To generate this report, you must have the Build holds queue cron job running. This cron job is a script that should be run periodically if your library system allows borrowers to place on-shelf holds. This script decides which library should be responsible for fulfilling a given hold request.

It’s behavior is controlled by the system preferences StaticHoldsQueueWeight, RandomizeHoldsQueueWeight and UseTransportCostMatrix.

If you do not want all of your libraries to participate in the on-shelf holds fulfillment process, you should list the libraries that *do* participate in the process here by inputting all the participating library’s branchcodes, separated by commas ( e.g. „MPL,CPL,SPL,BML“ etc. ).

By default, the holds queue will be generated such that the system will first attempt to hold fulfillment using items already at the pickup library if possible. If there are no items available at the pickup library to fill a hold, build_holds_queue.pl will then use the list of libraries defined in StaticHoldsQueueWeight. If RandomizeHoldsQueueWeight is disabled (which it is by default), the script will assign fulfillment requests in the order the branches are placed in the StaticHoldsQueueWeight system preference.

For example, if your system has three libraries, of varying sizes ( small, medium and large) and you want the burden of holds fulfillment to be on larger libraries before smaller libraries, you would want StaticHoldsQueueWeight to look something like „LRG,MED,SML“.

Chcete-li zátěž na plnění rezervací rozprostřít rovnoměrně na celý knihovní systém, jednoduše zvolte RandomizeHoldsQueueWeight. Je-li tato předvolba zvolena, bude pořadí, ve kterém budou knihovny žádány aby plnily objednávky, náhodné při každé změně fronty.

An alternative to static and randomized is using the Tansport cost matrix. It takes precedence in controlling where holds are filled from and allows you to define the ‚cost‘ of transport between any two libraries. To use the Transport cost matrix simply set your UseTransportCostMatrix preference to ‚Use‘.

Objednávky ke stažení z regálu

This report will show you all of the items that have holds on them that are available at the library for pulling. If the items are available at multiple libraries then all libraries with that item available will see the hold to pull until one library triggers the hold.

If enabled, clicking the Mark item as lost button will mark item as lost and notify the requesting patron depending on the value of the CanMarkHoldsToPullAsLost system preference.

image578

Poznámka

  • You can customize the columns of this table in the ‚Table settings‘ section of the Administration module (table id: holds-to-pull).

You can choose which LOST value to set the item to with the UpdateItemWhenLostFromHoldList system preference.

Můžete omezit výsledky, které vidíte pomocí políčka Zpřesnit na levé straně stránky:

image579

Rezervace čekající na vyzvednutí

Tato zpráva zobrazí všechny rezervace, které čekají na čtenáře, aby si je vyzvedli.

image580

Poznámka

  • You can customize the columns of this table in the ‚Table settings‘ section of the Administration module (table id: holdst).

Items that have been on the hold shelf longer than you normally allow (based on the ReservesMaxPickUpDelay preference value) will appear on the ‚Holds over‘ tab, they will not automatically be cancelled unless you have set the cron job to do that for you, but you can cancel all holds using the button at the top of the list.

image581

Poznámka

  • You can customize the columns of this table in the ‚Table settings‘ section of the Administration module (table id: holdso).

Poměry rezervací pro optimalizaci počtu jednotek

Poměry rezervací mohou pomoci při akvizici. Ukazují, kolik existuje požadavků vzhledem k počtu jednotek a ukazují, kdy je potřeba dokoupit další exempláře. Ve výchozím nastavení tento výstup ukáže všechny dokumenty, které mají poměr rezervací na jednotku alespoň 3.

image582

Poznámka

  • You can customize the columns of this table in the ‚Table settings‘ section of the Administration module (table id: holds-ratios).

Příchozí přesuny

Tato zpráva zobrazí seznam všech výtisků, které Koha považuje „na cestě“ do vaší knihovny.

image583

Pokud vaše převody jsou zpožděné v příchodu do vaší knihovny, uvidíte zprávu o tom, jak dlouho vaše výtisky jsou zpožděné.

image584

Důležité

An item is considered late based on the number of days you have entered in the TransfersMaxDaysWarning system preference.

Article requests

Article requests are somewhat similar to holds, but are not requests for an item to check out. Instead, article requests are requests for a photocopy of a particular section of a book or an article from a serial issue. This is very common in academic libraries where researchers may request a copy of a single article found in a journal.

Setting up article requests

First, enable your system preference for ArticleRequests.

Set to ‚Enable‘ patrons to place article requests.

Next you will need to decide how your patrons will make requests, either record only, item only, or both record and item level.

You can set 3 different system preferences for mandatory fields to be filled in depending on how your records are requested.

Next you will want to go into your circulation and fines rules matrix and select each rule for which you want to allow requests.

You can allow requests to be made at the record level, item level, yes (which means both) and no (which means no article requests may be placed).

Placing article requests

Now you can place requests on both the staff client and OPAC.

In the staff client, on the record details page, you will see a ‚Request article‘ button at the top and an ‚Article requests‘ tab to the left. The two options lead to the same page.

image1394

Just like a hold, you will be prompted to enter the patron’s card number or name.

image1395

Fill in the form.

image1396

Poznámka

Remember, the mandatory fields are set through the three system preferences ArticleRequestsMandatoryFields, ArticleRequestsMandatoryFieldsItemsOnly, and ArticleRequestsMandatoryFieldsRecordOnly.

If allowed, choose the specific item to request.

Then, click on ‚Place request‘.

From the OPAC, patrons can place requests themselves either from the results list

image1397

or by going to the detailed record.

image1398

As with a hold, if the patron is not logged in, they will be asked to do so.

The form is the same as the one in the staff interface.

image1399

If allowed, the patron can choose the specific item to request.

From their acocunt, the patron will be able to follow the progress of their request from ‚pending‘

image1400

to ‚processing‘.

image1401

The patron will also receive an email notification when the status of the request changes.

Once the request is completed the patron will receive an email notification and the article request will no longer appear in their account.

Managing article requests

Once the article request has been placed, staff will see new requests at the bottom of the home page on the staff client. (In the same location as tags, comments and modifications).

image1402

From there staff will be able to select requests to process.

image1403

The first step would be for a staff member to process the request, that moves the request to the processing tab and alerts other staff members that the request is in process. In the actions column, click on the dropdown menu and select ‚Process request‘. This will move the request to the processing tab.

image1404

Next staff will go to the shelf and make a copy of the requested article.

Once that is complete, staff can print the article request slip (this can be customized in notices and slips under AR_SLIP) and staple or paper clip it to the article. In the actions column, you can select the dropdown and select print slip.

Finally, staff will select the complete article request from the actions dropdown menu which will send a notice to the patron who made the request letting them know the request is ready for pickup.

This removes the article request from the processing tab.

Poznámka

Actions can also be made in bulk by checking the boxes next to the requests to process or by clicking ‚Select all‘, and choosing the new status from the actions menu on top of the table.

image1405

Překročené lhůty

Důležité

U knihoven s velkým počtem čtenářů, může být tato zpráva zabrat značné množství času po spuštění.

Poznámka

Large libraries can choose to filter the report before it runs by setting the FilterBeforeOverdueReport system preference to ‚Require‘.

Tato zpráva zobrazí všechny výtisky, jejichž výpůjční lhůta je překročena ve vaší knihovně.

image585

Poznámka

  • You can customize the columns of this table in the ‚Table settings‘ section of the Administration module (table id: circ-overdues).

Zprávu lze filtrovat pomocí volby menu na levé straně sestavy.

Poznámka

Tlačítko „Zobrazit všechny vypůjčené jednotky“ v podstatě přejde ze zprávy překročení výpůjční doby na zprávu o výpůjčkách. To vám ukáže všechny vypůjčené tituly bez ohledu na termín vrácení.

Překročené lhůty s účtovaným poplatkem (upomínky)

Tato zpráva vám ukáže všechny včas nevrácené výpůjčky v knihovně, a pokuty které na ně naběhly.

image586

If you would like to limit the report you can use the pull down menu at the top to limit to a specific shelving location at your branch. To see overdues with fines at other branches you will have to change your branch or log in at that branch.

Důležité

If you do not charge fines and/or don’t have the fines cron job running you will see no data on this report.

Nevyřízené prezenční výpůjčky

If you are using the on site checkouts functionality (OnSiteCheckouts) then you’ll have a report to view all items that are currently checked out on site.

image1260

This will list the due date (overdues in red), who has the item, item information and what library the item is at.

Tracking in-house use

Many libraries track the use of items within the library.

Poznámka

This is different from tracking on-site usage. In-house use is the use of items in the library by patrons without them having to check them out. On-site use is the use of items on site that must first be checked out. To learn more about on site usage please review the OnSiteCheckouts preference.

Tracking the use of items in the library without checking them out can be done in Koha one of two ways. The first is to create one or more Statistical Patrons. When collecting items that have been used within the library, you will want to check them out to your statistical patron:

image587

Namísto označení jednotky jako „vypůjčená“ bude systém nahrávat, že položka byla použita uvnitř v domě:

image588

Tyto kroky opakujte pro všechny jednotky, které byly použity v knihovně, abyste měli přesné statistiky pro jejich použití.

The other way to record local use of items is to set your RecordLocalUseOnReturn preference to ‚Record.‘ Then whenever you check an item in that is not checked out and not on hold a local use will be recorded.

image589

Poznámka

If you have RecordLocalUseOnReturn set to ‚Record‘ you can still use your statistical patrons to record local use as well.

Self checkout

Koha comes with a very basic self checkout module. To enable this module you need to set the WebBasedSelfCheck system preference to ‚Enable.‘ To use this module you have to log in as a staff member with self_check permissions.

Poznámka

Create a staff patron specifically for this action so that you don’t leave a real staff client logged into a computer all day

There is no link to the Self checkout module, but a simple addition to the OPACUserJS system preference can add one.

$(document).ready(function(){
    $("#login .btn").parent().after("<p><a href=\"http://YOUR_KOHA_OPAC_URL/cgi-bin/koha/sco/sco-main.pl\" target=\"_blank\">Self-Checkout</a></p>");
});

**Important**

The code above has line breaks added to make it more readable,
please be sure to enter the above as one line in when putting it in
the system preference.

Tento odkaz se pak objeví v dolní části protokolu na stránce:

image591

You can also access this module by going to: http://YOUR_KOHA_OPAC_URL/cgi-bin/koha/sco/sco-main.pl

When on the self checkout page, depending on the value in your SelfCheckoutByLogin system preference you will be asked to enter your cardnumber

image592

or your username and password

image593

Jakmile jste přihlášeni k selfcheck modulu, budete požádáni na skenování jednotek, které si půjčujete

image594

Jak skenujete jednotky, budou se objevovat pod polem čárového kódu

image595

When you are finished scanning items it is important to click the ‚Finish‘ button. This will prompt you to print a receipt and log you out of the self check module.

image596

Při pokusu o výpůjčky jednotek, mohou být některé případy, kdy se objeví chybová hlášení a čtenář bude poslán za knihovníkem. To se stane, i když umožňujete překonání výpůjčních funkcí. Pouze knihovník může překonat blokování výpůjčky a tak čtenáři musí jít za knihovníkem pro pomoc v těchto situacích.

image597

Self check-in

In order to use the self check-in module, you must first set the :ref: SelfCheckInModule <selfscheckinmodule-label> system preference to ‚Enable‘.

Then, you will have to create a patron with the self_checkin_module permission.

Poznámka

Create a staff patron specifically for this action so that you don’t leave a real staff client logged into a computer all day. You can give this patron only the aforementionned permission so it cannot be used for anything else.

Once this is done, you can head over to the self check-in page: http://YOUR_KOHA_OPAC_URL/cgi-bin/koha/sci/sci-main.pl

Log in with your staff patron with self check-in permissions

Once the computer or kiosk is set and the self check-in user logged in, patrons will be able to check-in their items themselves.

image1331

The patron will either scan the item’s barcode, if the computer is attached to a barcode scanner, or type in their item’s barcode in the box and click ‚Add‘ or press enter.

Poznámka

Most barcode scanners will automatically hit return after scanning.

Once they have scanned or entered all their items‘ barcodes, they can click on the ‚Check-in‘ button to return all the items at once.

Důležité

If the patron doesn’t click the ‚Check-in‘ button, the items will not be returned and will stay in their account.

Důležité

The self check-in module will not warn user if the item is late, if they have fines, if the item is on hold for someone else, or if they have messages in their account.

image1332

They can then click ‚Finish‘ to return to the main self check-in page.

image1333

Poznámka

If the patron doesn’t click ‚Finish‘, the screen will refresh after the timeout period specified in the SelfCheckInTimeout system preference.

Poznámka

Even if the patron doesn’t click ‚Finish‘ the item will still be checked in from their account.

You can cutomize the look of your self check-in screens by using the SelfCheckInUserCSS system preference or the SelfCheckInUserJS system preference.

You can add content, like instructions on how to use the self check-in system for example, by using the SelfCheckInMainUserBlock system preference.

Statistics about the transactions made through the self check-in module are logged into the action_logs table in the Koha database. You can therefore build a custom report to get the statistics you need.

Offline circulation utilities

Koha allows for you to continue circulation actions while offline by using any one of three utilities.

Offline circulation in Koha

If the AllowOfflineCirculation preference is set to ‚Enable‘ the library staff can continue to perform circulation actions within Koha when the system is offline. You will want to visit http://your-koha-staff-client-url/cgi-bin/koha/circ/offline.pl at least once while online and bookmark that page. That is the page you will go to when you are offline.

Důležité

The offline interface uses HTML LocalStorage, which depending on the browser and user setting, is limited to 2.5MB or 5MB per domain. This means that larger systems will not be able to synchronize their data and are recommended to use either the Firefox or Windows application for offline circulation.

Nastavit

Předtím, než bude systém nedostupný, běžte do modulu Výpůjčky a klikněte na odkaz „Vestavěný klient pro offline výpůjčky“

image598

Synchronizujte vaše data na každém počítači, který používáte pro půjčování a vracení. To provedete kliknutím na odkaz „Synchronizovat“ na pravé straně stránky.

image599

Důležité

The offline interface uses HTML LocalStorage, which depending on the browser and user setting, is limited to 2.5MB or 5MB per domain. This means that larger systems will not be able to synchronize their data and are recommended to use either the Firefox or Windows application for offline circulation.

To Vám umožní stáhnout kopii čtenářských dat a dat o výpůjčkách do prohlížeče. Klikněte na tlačítko „Stáhnout záznamy“ nahoře a potřebná data budou stažena.

image600

Jakmile budou stažena potřebná data, zobrazí se u každé sady datum poslední synchronizace.

image1261

Toto by se mělo provádět pravidelně, pro případ, kdyby nečekaně vypadlo připojení.

Půjčování

V případě, že je systém nedostupný, využijte stránku s klientem pro offline výpůjčky, kde budete moci i nadále provádět výpůjčky a vracení.

Půjčování se provádí vyhledáním čtenářů pomocí čárového kódu, nebo částí jména v horní částí stránky „Půjčování“. Poté budou vypsány informace o čtenáři, včetně výpůjček a poplatků, které jsou zapsány v lokální synchronizované databázi.

image601

Načtěte čárový kód jednotky, kterou chcete vypůjčit a zadejte termín vrácení. Bez zadání data pro vrácení nelze pokračovat.

image602

Jakmile je jednotka vypůjčena, objeví se pod informacemi o čtenáři.

image603

Koha offline uploading

Once the system is back online visit the ‚Synchronize‘ page on the Offline circulation module and click ‚Upload transactions‘

image604

Poté co je soubor nahrán, můžete kliknout na odkaz „Offline výpůjčky čekající na potvrzení“ a nechat systém Koha zpracovat akce provedené offline.

image605

After clicking ‚View pending offline circulation actions‘ you will be brought to a summary of all of the actions you loaded in to Koha in your *.koc file.

image606

  • Jen pokud jsou záznamy ze všech výpujčních počítačů jsou nahrány, bude možno je všechny zkontrolovat nebo vybrat jen ty, které chcete zpracovat přes Koha.

  • Click on the ‚Process‘ button and Koha will record every stored transaction one by one. For each transaction, the status will change to:

    • „Úspěšné.“ pokud byla transakce zpracována bez problémů

    • „Uživatel nenalezen.“ pokud je zadáno chybné číslo průkazky

    • „Exemplář nebyl nalezen.“ pokud čárový kód exempláře není správný

    • „Jednotka nebyla vypůjčena.“ pokud vracíte dostupnou jednotku

Jen pokud jsou ukončeny, máte souhrn všech svých transakcí

image607

Firefox plugin

There is an offline circulation tool that you can add to your Firefox browser as an addon. To do so, just go to https://addons.mozilla.org/en/firefox/addon/koct/ page and click on the „install now“ button. You may have to confirm the installation, just click on „install now“ and then restart Firefox to complete the installation.

Once you have installed the plugin and restarted Firefox, you will see the Koha logo in the download bar at the bottom right of Firefox.

image608

Kliknutím na logo se otevře nástroj ve vlastním okně.

image609

The plugin connsists of three sections:

  • The ‚Check out‘ section is where you check out items

  • The ‚Check in‘ section is where you check in items

  • The ‘Transactions’ section is where you can track the transactions done while in offline mode

    • The transactions will keep information until you empty it.

      image610

      If you’d like to clear the transactions, click the ‚Clear‘ box before hitting the ‚OK‘ button.

The first thing you want to do then is to set up the plugin. Proceed to the settings page, linked in the top right of the page or under ‘Configuration page’ in the Transactions section.

image611

Answer the 5 questions presented:

  • Serrver = URL služebního intranetu

  • Uživatelské jméno = jméno u vašeho služebního loginu

  • Heslo = vaše služební heslo

  • Branch code = the code for the branch where you are located

  • Commit Type = If you select ‘Send data to Koha’, your account will need to be approved by an administrator. If you select ‘Apply directly to Koha’, your account will not need to be approved.

    Důležité

    Chcete-li uložit nastavení, budete muset zavřít okno plugin a znovu jej otevřít kliknutím na logo Koha v liště doplňků.

    Poznámka

    Můžete si vytvořit účet zaměstnance věnovaný offline výpůjčkám. Tak, bez ohledu na to, kdo je u výpůjčního pultu, mohou všichni používat stejný přihlašovací login. Vedle těchto řádků, můžete použít skupinové přihlášení, který již stejně máte pro výpůjčky.

Once you have everything set up you can start checking items in and out.

Výpůjčky:

A screenshot of the KOCT Checkout section

  • Under the ‚Checkout‘ heading

  • Skenujte čárový kód čtenáře

  • Skenujte čárový kód jednotky

  • Click ‚Checkout‘

Vracení:

image613

  • Under the ‚Checkin‘ heading

  • Skenujte čárový kód jednotky

  • Click ‚Checkin‘

Each time, you check out or check in an item, a new transaction is recorded in the local plugin database. This is recorded in the Transactions section bellow.

image615

Poznámka

Status bude „místní“, pokud jste v režimu offline a nezpracováváte transakce v Koha

When your Internet connection comes back up you will want to get these transactions in to Koha. Before processing these transactions you should be aware of a few issues.

Because you are not connected to your Koha database when using this plugin holds will need additional processing. If an item you check in while offline has a hold, the hold is kept on the item. Since, you can’t confirm holds found during the processing of every check in, the holds stay on the item and will need to be managed later. If you only checked in a few items you can just keep a record of them all. If you checked in a lot of items you can use the Holds queue once it rebuilds to see what holds made it to the shelf erroneously.

Podobně, pokud čtenářova karta vypršela, nástroj offline výpůjčky o tom neví, takže výpůjčka bude provedena bez ohledu na zablokování čtenářova účtu.

Máte dvě možnosti pro přidání tohoto do Koha

A screenshot of the KOCT Checkout section

  • Apply to Koha

    • If you checked in/out on more than one computer at the same time, what you want is to process every transaction consistently. Let’s say for instance that one patron checked a book out on one computer and then checked the same book in on another computer. To be consistent, you need to record the check out first and then the check in. Not the opposite! To do so, you need to group every transaction in one place, sort them all and then, process everything. So, you need to use the „Apply to Koha“ option from every plugin/computer you worked with. This way, the log will go to Koha and be accessible from the Offline Circulation page.

      image616

    • Get there: Circulation > Pending offline circulation actions

      image617

    • Jen pokud jsou záznamy ze všech výpujčních počítačů jsou nahrány, bude možno je všechny zkontrolovat nebo vybrat jen ty, které chcete zpracovat přes Koha.

    • Klikněte na tlačítko „Zpracovat“ a Koha nahraje všechny transakce jednu po druhé. Pro každou transakci se status změní na:

      • „Úspěšné.“ pokud byla transakce zpracována bez problémů

      • „Uživatel nenalezen.“ pokud je zadáno chybné číslo průkazky

      • „Exemplář nebyl nalezen.“ pokud čárový kód exempláře není správný

      • „Jednotka nebyla vypůjčena.“ pokud vracíte dostupnou jednotku

    • Jen pokud jsou ukončeny, máte souhrn všech svých transakcí

      image618

  • Použít přímo

    • Pokud jste provedli všechny výpůjční transakce na jednom počítači, pak vše je už setříděno, takže si můžete vybrat „Použít přímo“

    • Sloupec status bude aktualizován abyste věděli jestli transakce byly zapracovány

      • „Úspěšné.“ pokud byla transakce zpracována bez problémů

      • „Uživatel nenalezen.“ pokud je zadáno chybné číslo průkazky

      • „Exemplář nebyl nalezen.“ pokud čárový kód exempláře není správný

      • „Jednotka nebyla vypůjčena.“ pokud vracíte dostupnou jednotku

Offline circ tool for Windows

The Offline circulation utility can be downloaded at: https://github.com/bywatersolutions/koha-offline-circulation/releases

To generate a borrowers.db file for loading in to the Windows tool you will need to run the file generator via a cron job.

Upload offline circ file

The offline circulation tool for Windows will generate a KOC file that you can upload into Koha once your system comes back up.

Na výpůjčním menu klikněte „Načíst offline výpůjční soubor (.koc)“

image621

Browse your computer for the *.koc file

image622

Hned po načtení souboru klikněte na ‚Zpracovat soubor‘

image623

Pokud je toto dokončeno, budete moci nahrávat jiný soubor nebo obsluhovat čekající offline výpůjčky.

image624

After clicking ‚View pending offline circulation actions‘ you will be brought to a summary of all of the actions you loaded in to Koha in your *.koc file.

image625

  • Jen pokud jsou záznamy ze všech výpujčních počítačů jsou nahrány, bude možno je všechny zkontrolovat nebo vybrat jen ty, které chcete zpracovat přes Koha.

  • Klikněte na tlačítko „Zpracovat“ a Koha nahraje všechny transakce jednu po druhé. Pro každou transakci se status změní na:

    • „Úspěšné.“ pokud byla transakce zpracována bez problémů

    • „Uživatel nenalezen.“ pokud je zadáno chybné číslo průkazky

    • „Exemplář nebyl nalezen.“ pokud čárový kód exempláře není správný

    • „Jednotka nebyla vypůjčena.“ pokud vracíte dostupnou jednotku

Jen pokud jsou ukončeny, máte souhrn všech svých transakcí

image626