Ausleihe

Pfad in Koha: Mehr > Administration > Globale Systemparameter > Ausleihe

Artikelbestellungen

ArticleRequests

Fragt: ___ die Artikelbestellung für Benutzer.

Voreinstellung: Nicht aktivieren

Werte:

• Nicht aktivieren

• Aktiviere

Beschreibung:

• Dieser Parameter regelt, ob Kunden Artikelbestellungen aufgeben dürfen.

• Dies ist die zentrale Einstellung für die Funktion article request.

ArticleRequestsLinkControl

Fragt: ___ Links zur Artikelbestellung in der Trefferliste.

Voreinstellung: nutze einen Algorithmus zum Ein- und Ausblenden

Werte:

• Zeige immer die

• Verwende Algorithmus zur Bestimmung der Sichtbarkeit der

Beschreibung:

• On the OPAC results page, either always show the ‚Request article‘ link or check the branch, patron and item type combination to determine whether or not an article can be requested from this particular record before displaying the link.

ArticleRequestsMandatoryFields

Asks: For records that are record level or item level requestable, make the following fields mandatory: ___

Default: None selected

Werte:

• [Alle auswählen]

• Verfasser

• Kapitel

• Datum

• Heft

• Seiten

• Titel

• Jahrgang

Beschreibung:

• Mit diesem Parameter wird festgelegt, welche Felder ausgefüllt werden müssen, bevor eine Anfrage für einen Artikel auf Datensatz- oder Artikelebene gestellt werden kann. Die Auswahl von [Alle auswählen] bedeutet, dass alle aufgeführten Felder (Verfasser, Kapitel, Datum, Heft, Seitenzahlen, Titel, Band) ausgefüllt werden müssen, bevor die Artikelanfrage gestellt werden kann.

ArticleRequestsMandatoryFieldsItemsOnly

Asks: For records that are only item level requestable, make the following fields mandatory: ___

Default: None selected

Werte:

• [Alle auswählen]

• Verfasser

• Kapitel

• Datum

• Heft

• Seiten

• Titel

• Jahrgang

Beschreibung:

• This preference controls what fields must be filled in before an article request can be placed for an item level request only. Choosing [Select all] indicates that all fields listed (Author, Chapters, Date, Issue, Pages, Title, Volume) must be completed before the article request can be placed.

ArticleRequestsMandatoryFieldsRecordOnly

Asks: For records that are only record level requestable, make the following fields mandatory: ___

Default: None selected

Werte:

• [Alle auswählen]

• Verfasser

• Kapitel

• Datum

• Heft

• Seiten

• Titel

• Jahrgang

Beschreibung:

• Mit dieser Einstellung wird festgelegt, welche Felder ausgefüllt werden müssen, bevor eine Anfrage für einen Artikel auf Datensatzebene gestellt werden kann. Die Auswahl von [Alle auswählen] bedeutet, dass alle aufgeführten Felder (Verfasser, Kapitel, Datum, Heft, Seitenzahlen, Titel, Band) ausgefüllt werden müssen, bevor die Artikelanfrage gestellt werden kann.

ArticleRequestsOpacHostRedirection

Asks: ___ redirection from child to host based on MARC21 773$w when the child has no items when requesting articles on the OPAC.

Voreinstellung: Deaktiviere

Werte:

• Deaktiviere

• Aktiviere

Beschreibung:

• When enabled, if a patron attempts to place an article request from an analytic record the system will automatically populate some details in the request from using data from the host record.

ArticleRequestsSupportedFormats

Fragt: Die folgenden Lieferformate für Artikelbestellungen werden unterstützt: ___

Default: PHOTOCOPY

Werte: Aktuell gültige Formate sind PHOTOCOPY und SCAN

Beschreibung:

• This system preference controls the choices available in the ‚Format‘ drop- down menu when placing an article request.

• Die gültigen Formate sind PHOTOCOPY und SCAN.

• Trennen Sie die unterstützten Formate mit Pipe (|), zum Beispiel PHOTOCOPY|SCAN

• Das erste angegebene Format wird bei der Artikelbestellung voreingestellt.

Batch checkout

BatchCheckouts

Fragt: ___ Stapelverbuchung

Default: Don’t allow

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• Dieser Parameter ist der zentrale für die Funktion Batch-Checkout

• Stellen Sie sicher, dass Sie die Benutzertypen, die die Stapelverbuchung nutzen dürfen, in BatchCheckoutsValidCategories hinterlegt haben

Siehe auch:

• BatchCheckoutsValidCategories

• SCOBatchCheckoutsValidCategories

BatchCheckoutsValidCategories

Fragt: Benutzertypen, für die eine Stapelverbuchung erlaubt ist: ___

Werte:

• Values are the patron categories; multiple categories can be selected.

Standardwert: Keine

Beschreibung:

• Prüfen Sie die Benutzertypen, für die Stapelverbuchungen erlaubt sind

• BatchCheckouts must be enabled for this preference to have any effect

Siehe auch:

• BatchCheckouts

• SCOBatchCheckoutsValidCategories

Checkin policy

AutomaticConfirmTransfer

Asks: ___ automatically confirm a transfer when the modal is dismissed without clicking ‚Yes‘.

Voreinstellung: Keine Zusammenfassung

Werte:

• Don’t

• Do

Beschreibung:

• This system preference is used to control the transfer behavior when a staff member clicks away from the transfer confirmation pop-up.

• Wenn „Bestätige nicht“ eingestellt ist, wird das Element unverändert belassen wenn Sie das Dialogfenster wegklicken.

• Wenn „Bestätige“ eingestellt ist, wird der Transport durch Übergehen des Dialogfensters bestätigt und der Artikel in den Transport gegeben.

• Das Dialogfenster kann nur übergangen werden, wenn der Parameter TransfersBlockCirc auf „Keine Sperre“ gesetzt ist.

BlockReturnOfLostItems

Fragt: ___ die Rückgabe von als verloren markierten Exemplaren.

Default: Don’t block

Werte:

• Sperren

• Don’t block

Beschreibung:

• Dieser Parameter steuert, ob ein Artikel mit dem Status „verloren“ (952$1 in MARC21) zurückgegeben werden kann oder nicht.

BlockReturnOfWithdrawnItems

Fragt: ___ die Rückgabe von Medien die ausgeschieden wurden.

Default: Block

Werte:

• Sperren

• Don’t block

Beschreibung:

• Dieser Parameter steuert, ob ein ausgeschiedener Artikel (952$0 in MARC21) zurückgegeben werden kann oder nicht.

CalculateFinesOnBackdate

Fragt: ___ Mahngebühren, wenn ein Exemplar mit zurückdatiertem Rückgabedatum zurückgegeben wird.

Default: Do

Werte:

• Do

• Don’t

Beschreibung:

• Dieser Parameter ähnelt CalculateFinesOnReturn, wird aber verwendet, wenn Rückgaben entweder durch den Book-Drop-Modus oder das festgelegte Rückgabedatum rückdatiert werden (siehe SpecifyReturnDate).

CalculateFinesOnReturn

Fragt: ___ die Mahngebühren, wenn das Exemplar zurückgegeben wird.

Default: Do

Werte:

• Do

• Don’t

Beschreibung:

• If this preference is set to „Do“ and the fines cron job is off then Koha will calculate fines only when items are returned. If you have the fines cron job on and this preference set to „Do“ then this preference will calculate fines based on the cron (usually run nightly) and then again when you check the item in. This option is best for those who are doing hourly loans. If this preference is set to „Don’t“ then fines will only be accrued if the fines cron job is running.

Warnung

If you are doing hourly loans, this should be set to ‚Do‘.

Warnung

The finesMode system preference must be set to ‚Calculate and charge‘ in order for this system preference to have any effect.

HidePersonalPatronDetailOnCirculation

Fragt: ___ die Telefonnummer, E-Mail-Adresse und die Adressdaten eines Benutzers auf der Ausleihseite.

Voreinstellung: Keine Zusammenfassung

Werte:

• Don’t

• Do

Beschreibung:

• Dieser Parameter steuert die Anzeige von Telefonnummer, E-Mail-Adresse und physischer Adresse des Benutzers auf der linken Seite der circulation page (unter dem Profilbild, falls vorhanden).

• When set to ‚Do‘, this information will only be visible on the patron’s detail page.

HoldsAutoFill

Fragt: ___ von Vormerkungen ohne Bestätigungsaufforderung an das Bibliothekspersonal.

Voreinstellung: Keine Zusammenfassung

Werte:

• Do

• Don’t

Beschreibung:

• Wenn der Parameter auf „Automatische Erfüllung“ eingestellt ist, erscheint das Dialogfenster der Vormerkung nicht, wenn ein vorgemerktes Exemplar zurückgegeben wird.

HoldsAutoFillPrintSlip

Fragt: ___ automatischen Dialog für den Druck von Vormerkungsquittungen bei automatisch erfüllten Vormerkungen.

Voreinstellung: Keine Zusammenfassung

Werte:

• Do

• Don’t

Beschreibung:

• If set to ‚Do‘, the holds slip print pop-up will appear automatically upon checking in an item placed on hold.

• HoldsAutoFill must be set to ‚do‘ for this preference to have any effect.

HoldsNeedProcessingSIP

Fragt: ___ von Vormerkungen, wenn ein vorgemerktes Exemplar über SIP2 zurückgegeben wird.

Default: Fulfill

Werte:

• Fulfill

• Don’t fulfill

Beschreibung:

• This system preference controls whether or not holds are automatically filled by items returned via SIP (sorter, auto check-in stations, etc.)

SkipHoldTrapOnNotForLoanValue

Asks: Never trap items with ‚not for loan‘ values of ___ to fill holds.

Beschreibung:

• This system preference is used to completely exclude items with ‚not for loan‘ values from filling holds.

• Enter NOT_LOAN authorized values separated by pipes (|).

StoreLastBorrower

Asks: ___ the last patron to return an item.

Default: Don’t store

Werte:

• Don’t store

• Store

Beschreibung:

• This preference allows you to store the last patron to borrow an item even if the patron has chosen to have their reading history anonymized.

Bemerkung

This setting is independent of opacreadinghistory and AnonymousPatron.

TransfersBlockCirc

Fragt: ___ bei Triggern einer Transportmeldung die Rückgabe.

Default: Block

Werte:

• Don’t block

• Sperren

Beschreibung:

• This system preference controls whether or not the transfer pop-up blocks further checkins.

• If this is set to „Don’t block“, the AutomaticConfirmTransfer system preference determines what happens if the pop-up is dismissed without confirming the transfer.

TrapHoldsOnOrder

Fragt: ___ Vormerkungen mit Exemplaren, die nicht ausleihbar aber vormerkbar sind (Nicht-Ausleihbar-Status < 0).

Default: Trap

Werte:

• Don’t trap

• Trap

Beschreibung:

• This system preference controls whether or not items that have a NOT_LOAN authorized value smaller than 0 (which means that the item can be put on hold, but not checked out), should be used to fill holds.

UpdateItemLocationOnCheckin

Fragt: Es ist eine Liste von Werte-Paaren. Direkt nach dem ersten Wert folgt ein Doppelpunkt, ein Leerzeichen und dann der zweite Wert.

Beschreibung:

• This system preference affects the item’s current and permanent locations when the item is checked in (whether it was checked out or not).

• Allgemeine Regel: Wenn der Standortcode auf der linken Seite des Doppelpunkts (:) mit dem aktuellen Standort des Exemplars übereinstimmt, wird der Standort entsprechend des Standortcodes auf der rechten Seite des Doppelpunkts (:) aktualisiert.

• The values are the LOC authorized values.

• For example, STAFF: GEN will move an item from the staff office to the general collection when the item is checked in.

• Special terms

  • PROC: Processing center. When using PROC, only the current location will be affected.

  • CART: Shelving cart. When using CART, only the current location will be affected.

  • _PERM_: This will use the item’s permanent location, whatever that location is.

  • _BLANK_: Used on the left as a first value, it will add a location if there is none. Used on the right as a second value, it will remove the location.

  • _ALL_: Used on the left as a first value, it will affect all items and override all other rules.

Warnung

Erfordert YAML-Syntax zum Funktionieren

This means

• Make sure there is NO space between the first value and the colon

• Make sure there IS a space between the colon and the second value

• Achten Sie darauf, dass jedes Paar in einer eigenen Zeile steht

• If using PROC or CART, use the cart_to_shelf cron job to return the items to their permanent location after a determined number of hours.

UpdateNotForLoanStatusOnCheckin

Version

The system preference was expanded in version 23.11 of Koha to include item types. In previous versions, only use not for loan value pairs.

Asks: This is a list of item types and value pairs. When an item is checked in, if it’s item type matches, and if the value on the left matches the item’s not for loan value it will be updated to the value on the right.

Beschreibung:

• This system preference affects the item’s ‚not for loan‘ status when the item is checked in (whether it was checked out or not).

• For each item type, there can be multiple not for loan status pairs.

• Allgemeine Regel: Wenn der Standortcode auf der linken Seite des Doppelpunkts (:) mit dem aktuellen Standort des Exemplars übereinstimmt, wird der Standort entsprechend des Standortcodes auf der rechten Seite des Doppelpunkts (:) aktualisiert.

• The values are the NOT_LOAN authorized values.

• The item type codes are from the item types.

• For example, ‚-1: 0‘ will cause an item that was set to ‚Ordered‘ to now be available for loan

• The _ALL_ code can be used in place of an item type code to apply to all item types. This will not override other rules, if any are defined for specific item types.

• This system preference can also be used to only display the not for loan status. To do so, enter ONLYMESSAGE on the right of the colon.

Example:

_ALL_:
 -1: 0

CR:
 1: 0

BK:
 -1: ONLYMESSAGE

• For all item types, except BK, a value of -1 will be changed to 0.

• For CR item type, a value of 1 will be changed to 0.

• For BK item type, a value of -1 will show the description of the -1 not for loan status, without changing it.

Warnung

Erfordert YAML-Syntax zum Funktionieren

This means

• The item type code should be followed by a colon

• Make sure all not for loan value pairs for an item type are preceded by a space

• Make sure there is NO space between the first value and the colon

• Make sure there IS a space between the colon and the second value

• Achten Sie darauf, dass jedes Paar in einer eigenen Zeile steht

Checkout policy

AgeRestrictionMarker

Fragt: Verhindere, dass Benutzer mit den folgenden Zielgruppenwerten ungeeignete Medien erhalten: ___

Beschreibung:

• This preference defines certain keywords that will trigger Koha to restrict checkout based on age. These restrictions can be overridden by the AgeRestrictionOverride preference. Enter in this field a series of keywords separated by bar (|) with no spaces. For example PG|R|E|EC|Age| will look for PG followed by an age number, R followed by an age number, Age followed by an age number, and so on. These values can appear in any MARC field, but Library of Congress recommends the 521$a (Target Audience Note). Whatever field you decide to use you must map the word agerestriction in the biblioitems table to that field in the Koha to MARC Mapping. When cataloging you can enter values like PG 13 or E 10 in the 521$a and Koha will then notify circulation librarians that the material may not be recommended for the patron based on their age.

  Wichtig

  You must map the word agerestriction in the biblioitems table to the MARC field where this information will appear via the Koha to MARC Mapping administration area.

AgeRestrictionOverride

Default: Don’t allow

Fragt: ___ Mitarbeitern, die Altersbeschränkung bei der Ausleihe zu übergehen.

Werte:

• Erlaube

  

• Erlaube nicht

  

Beschreibung:

• When the AgeRestrictionMarker preference is set, Koha will try to warn circulation librarians before checking out an item that might have an age restriction listed in the MARC record. This preference asks if you would like the staff to be able to still check out these items to patrons under the age limit.

AllFinesNeedOverride

Default: Require

Asks: ___ staff to manually override all fines, even fines less than noissuescharge.

Werte:

• Don’t require

• Erfordere

Beschreibung:

• This preference let’s you decide if you want to always be warned that the patron has fines when checking out. If you have it set to ‚Require‘ then no matter how much money the patron owes a message will pop up warning you that the patron owes money.

AllowFineOverride

Default: Don’t allow

Asks: ___ staff to manually override and check out items to patrons who have more than noissuescharge in fines.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This preference lets you decide if you staff can check out to patrons who owe more money than you usually let them carry on their account. If set to ‚Allow‘ staff will be warned that the patrons owes money, but it won’t stop the staff from checking out to the patron.

AllowItemsOnHoldCheckoutSCO

Default: Don’t allow

Fragt: ___ die Ausleihe von Exemplaren in der Selbstausleihe wenn diese für jemand anderen vorgemerkt sind. Falls erlaubt, generiere keine Warnung für RESERVE_WAITING und RESERVED. Damit wird die Selbstausleihe für diese Exemplare erlaubt.

Werte:

• Erlaube

• Erlaube nicht

  Wichtig

  This system preference relates only to Koha’s web based self checkout.

Beschreibung:

• When this preference is set to ‚Allow‘ patrons will be able to use Koha’s web based self checkout to check out a book to themselves even if it’s on hold for someone else. If you would like Koha to prevent people from checking out books that are on hold for someone else set this preference to „Don’t allow“.

AllowItemsOnHoldCheckoutSIP

Fragt: ___ die Ausleihe von Exemplaren über SIP, die für jemand anderen vorgemerkt sind.

Default: Don’t allow

Werte:

• Erlaube

• Erlaube nicht

  Wichtig

  This system preference relates only to SIP-based self-checkout, not Koha’s web based self checkout.

Beschreibung:

• When this preference is set to ‚Allow‘ patrons will be able to use your external self check machine to check out a book to themselves even if it’s on hold for someone else.

• If you would like Koha to prevent people from checking out books that are on hold for someone else set this preference to ‚Don’t allow‘.

AllowMultipleIssuesOnABiblio

Standardwert: Ja

Asks: ___ patrons to check out multiple items from the same record.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• If this preference is set to ‚Allow‘ then patrons will be able to check out multiple copies of the same title at the same time. If it’s set to „Don’t allow“ then patrons will only be allowed to check out one item attached to a record at a time. Regardless of the option chosen in this preference records with subscriptions attached will allow multiple check outs.

  Wichtig

  Dies gilt nur für Titel, die nicht mit einem Abonnement verknüpft sind.

AllowNotForLoanOverride

Standardwert: Ja

Fragt: ___ dass Mitarbeiter Ausleihsperren übergehen und nicht ausleihbare Exemplare entleihen können.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This parameter is a binary setting which controls the ability of staff (patrons will always be prevented from checking these items out) to check out items that are marked as „not for loan“. Setting it to „Allow“ would allow such items to be checked out, setting it to „Don’t allow“ would prevent this. This setting determines whether items meant to stay in the library, such as reference materials, and other library resources can be checked out by patrons.

AllowRenewalLimitOverride

Standardwert: Ja

Asks: ___ staff to manually override the renewal limit and renew a checkout when it would go over the renewal limit.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This preference is a binary setting which controls the ability of staff to override the limits placed on the number of times an item can be renewed. Setting it to „Allow“ would allow such limits to be overridden, setting it to „Don’t allow“ would prevent this. This is a preference in which if it is set to „allow“ it would allow the library staff to use their judgment for overriding the renew limit for special cases, setting it to „Don’t allow“ prevents an opportunity for abuse by the library staff.

AllowRenewalOnHoldOverride

Fragt: ___ dass Bibliothekspersonal Exemplare, die vorgemerkt sind, verlängern und ein Verlängerungsdatum angeben kann.

Default: Don’t allow

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This preference enables items that are on hold to be renewed with a due date specified by the user.

  It can appear in two locations:

  1. In the „Checkouts“ table on the Patron Details screen. It is possible to select on loan items that would otherwise fulfill a hold request to be renewed. When such an item is selected, an additional date selection box is displayed to allow the user to specify the due date for all on hold items that are to be renewed.

  2. In the Circulation > Renew alert screen. When a barcode of an on loan item that would ordinarily fulfill a hold request is entered, the usual alert is displayed indicating that the item is on hold, it is still possible to override this, and renew. With this preference enabled it is also possible to specify a due date.

AllowReturnToBranch

Default: to any library

Asks: Allow materials to be returned to ___

Werte:

• either the library the item is from or the library it was checked out from.

• only the library the item is from.

• only the library the item was checked out from.

• to any library.

Beschreibung:

• This preference lets the library system decide how they will accept returns. Some systems allow for items to be returned to any library in the system (the default value of this preference) others want to limit item returns to only specific branches. This preference will allow you to limit item returns (checkins) to the branch(es) set in the value.

AllowTooManyOverride

Standardwert: Ja

Fragt: ___ dass Bibliotheksmitarbeiter Ausleihen trotzdem durchführen können, auch wenn der Benutzer die maximal mögliche Anzahl an Ausleihen erreicht hat.

Werte:

• Erlaube

  

• Erlaube nicht

  

Beschreibung:

• If this preference is set to „Allow“ then staff all will be presented with an option to checkout more items to a patron than are normally allowed in the circulation and fines rules. If this preference is set to „Don’t allow“ then no staff member will be able to check out more than the circulation limit.

AutomaticItemReturn

Default: Do

Fragt: ___ Rücktransport von Exemplaren in ihre Heimatbibliothek, die in einer anderen Bibliothek zurückgegeben werden.

Werte:

• Do

• Don’t

Beschreibung:

• This preference is a binary setting which determines whether an item is returned to its home branch automatically or not. If set to „Don’t“, the staff member checking an item in at a location other than the item’s home branch will be asked whether the item will remain at the non-home branch (in which case the new location will be marked as a holding location) or returned. Setting it to „Do“ will ensure that items checked in at a branch other than their home branch will be sent to that home branch.

AutoReturnCheckedOutItems

Fragt: ___ dass Bibliothekspersonal Ausleihen bestätigen muss, wenn das Exemplar bereits an einen anderen Benutzer entliehen ist.

Werte:

• Do

• Don’t

Default: Do

Beschreibung:

• This preference controls whether Koha asks for a confirmation when trying to check out an item that is already checked out to another patron.

• Set to ‚Do‘, Koha will ask the staff member to confirm the check out.

  

• Set to ‚Don’t‘, Koha will simply return the item from the previous patron’s file and check it out to the actual patron and show a message.

  

CircControl

Default: the library the item is from

Fragt: Verwende die Ausleihkonditionen ___

Werte:

• the library the item is from

  • The circulation and fines policies will be determined by the item’s library where HomeOrHoldingBranch chooses if item’s home library is used or holding library is used.

• the library the patron is from

  • The circulation and fines policies will be determined the patron’s home library

• die Bibliothek, unter der Sie angemeldet sind

  • The circulation and fines policies will be determined by the library that checked the item out to the patron

CircControlReturnsBranch

Asks: To determine whether an item is transferred or remains in the library after checkin, use the circulation rules of ___.

Default: the library the item is owned by (homebranch)

Werte:

• the library the item is checked in at (checkin library)

• the library the item is currently held by (holdingbranch)

• the library the item is owned by (homebranch)

Beschreibung:

• This system preference controls which return policy rule (item returns home, item returns to issuing library, or item floats) is used when checking in items.

ConsiderLibraryHoursInCirculation

Version

Dieser Parameter wurde mit der Koha-Version 24.05 eingeführt.

Asks: When checking out an hourly loan that will be due after the library closes, ___

Default: shorten the loan period and set the checkout to be due at the library’s close time.

Werte:

• shorten the loan period and set the checkout to be due at the library’s close time.

• do not consider the library’s opening hours.

• extend the loan period and set the checkout to be due at the library’s open time.

Beschreibung:

• This system preference determines the fate of an hourly checkout which would be due after the library’s opening hours.

• Set the library’s opening hours in Administration > Libraries.

ConsiderOnSiteCheckoutsAsNormalCheckouts

Fragt: ___ als normale Ausleihen. Wenn aktiviert, werden die Vor-Ort-Ausleihen bei der Berechnung der maximalen Ausleihanzahl für normale Ausleihen mit berücksichtigt. Die maximale Ausleihanzahl für Vor-Ort-Ausleihen wird zusätzlich ebenfalls berücksichtigt.

Default: Consider

Werte:

• Consider

• Don’t consider

Beschreibung:

• This preference allows you to decide if checkouts that are considered on-site checkouts are counted toward the total checkouts a patron can have. You can also set your circulation and fines rules to allow only a certain number of normal and on-site checkouts.

DefaultLongOverduePatronCategories

Version

This system preference was added in Koha version 24.05.

Asks: Set the default patron categories to receive overdues to ___

Werte:

• Values are the patron categories; multiple categories can be selected.

• Standardwert: Keine

Beschreibung:

Wichtig

This system preference will only be active if DefaultLongOverdueSkipPatronCategories is empty.

• This system preference is used to limit the automatic long overdue process (enabled by the DefaultLongOverdueLostValue and DefaultLongOverdueDays system preferences) to specific patron categories.

  • For example, you might want to only process long overdues automatically for students but not anybody else.

• If this field is empty, all patron categories will be subject to the long overdue process.

• This system preference is used when the longoverdue cron job is called without the --category parameter.

• This system preference allows libraries to set the values of the longoverdue cron job without having to edit the crontab.

DefaultLongOverdueSkipPatronCategories

Version

This system preference was added in Koha version 24.05.

Asks: Set the default patron categories to not receive overdues to ___

Werte:

• Values are the patron categories; multiple categories can be selected.

• Standardwert: Keine

Beschreibung:

Wichtig

This system preference overrides the DefaultLongOverduePatronCategories system preference. Therefore, if it is filled, all patron categories except the ones listed will be processed, regardless of the values in DefaultLongOverduePatronCategories.

• This system preference is used to exclude specific patron categories from the automatic long overdue process (enabled by the DefaultLongOverdueLostValue and DefaultLongOverdueDays system preferences).

  • For example, you might want to process long overdues automatically for everyone except students.

• If this field is empty, all patron categories will be subject to the long overdue process.

• This system preference is used when the longoverdue cron job is called without the --skip-category parameter.

• This system preference allows libraries to set the values of the longoverdue cron without having to edit the crontab.

HomeOrHoldingBranch

Default: the item’s home library (homebranch).

Fragt: Verwende die Ausleihkonditionen ___

Werte:

• the item’s home library (homebranch).

• the item’s holding library (holdingbranch).

Beschreibung:

• This preference does several things.

  • If CircControl is set to ‚the library the item is from‘ then the circulation and fines policies will be determined by the item’s library where HomeOrHoldingBranch chooses if item’s home library is used or holding library is used.

  • If IndependentBranches is set to ‚Prevent‘ then the value of this preference is used in figuring out if the item can be checked out. If the item’s home library does not match the logged in library, the item cannot be checked out unless you have the superlibrarian permission.

  Wichtig

  It is not recommend that this setting be changed after initial setup of Koha because it will change the behavior of items already checked out.

IssuingInProcess

Standardwert: Nein

Fragt: ___ dass Benutzer ein Exemplar entleihen, dessen Leihgebühr sie über das Gebührenlimit bringen würde.

Werte:

• Nein

• Ja

Beschreibung:

• This preference determines if a patron can check items out if there is an overdue fine on the account and any of the materials the patron wishes to check out will potentially tip the account balance over the maximum fines policy the library has in place.

Example: Your library has a $5 limit set for ‚fines‘ (i.e., after incurring $5 in fines, a patron can no longer check out items). A patron comes to the desk with 5 items to check out (4 books and a video) The patron has $4 in charges already on their account. One of the videos has a rental charge of $1, therefore making the total fines on the patron’s account suddenly $5 (the limit).

ItemsDeniedRenewal

Asks: Define custom rules to deny specific items from renewal.

Beschreibung:

• This preference allows you to specify items that should not be renewed either from the OPAC or staff client. You can enter any combination of fields (from the items table in the Koha database) followed by a colon then a space then a bracketed list of values separated by commas. e.g:

  ccode: [NEWFIC,NULL,DVD]
  itype: [NEWBK,""]
  

• Das Wort ‚NULL‘ kann verwendet werden, um Verlängerungen bei undefinierten Feldern zu verhindern, während eine leere Zeichenkette „“ Verlängerungen bei einem leeren (aber definierten) Feld verhindert.

  Hinweis

  If using automatic renewal notices your notice text should be updated to account for the new reason that renewals may be denied „item_denied_renewal“.

LoadCheckoutsTableDelay

Version

This system preference was added in Koha version 23.11.

Asks: Delay the automatic loading of the checkouts table on the checkouts page by ___ seconds when „Always show checkouts automatically“ is enabled.

Standardwert: 0

Beschreibung:

• This system preference is used to delay the loading of the checkouts table in a patron’s account to prevent too many service queries when checking out a number of items in a row.

• Enter a positive integer, such as 5, to delay the loading of the table and prevent it from reloading after each check out.

maxoutstanding

Default: 5

Sperre Vormerkfunktionen im OPAC für Benutzer mit mehr als ___ EUR Gebühren.

noissuescharge

Asks: Prevent patrons from checking out items if they have more than ___ {currency} in fines.

Default: 5

Beschreibung:

• This preference is the maximum amount of money owed to the library before the user is banned from borrowing more items.

• By default, this includes all debit types (overdue fines, account creation fees, hold fees, manual fees, rental fees, etc.), but it’s possible to exclude debit types or to include custom manual debit types using the ‚Included in noissuescharge‘ option when creating or editing a debit type.

Siehe auch:

• maxoutstanding

• NoIssuesChargeGuarantees

• NoIssuesChargeGuarantorsWithGuarantees

• AllFinesNeedOverride

• AllowFineOverride

NoIssuesChargeGuarantees

Fragt: Verbiete eine Ausleihe an einen Benutzer, der für andere Benutzer bürgt, die zusammen mehr als ___ EUR offene Gebühren haben.

Beschreibung:

• Allows a library to prevent patrons from checking out items if his or her guarantees owe too much in fines.

NoIssuesChargeGuarantorsWithGuarantees

Asks: Prevent a patron from checking out if the patron has guarantors and those guarantor’s guarantees owing in total more than ___ (currency) in fines.

Beschreibung:

• Allows a library to prevent patrons from checking out items if their guarantees or their guarantees‘ other guarantors owe too much in fines.

• This effectively blocks the entire family.

NoRenewalBeforePrecision

Default: date

Fragt: Berechnung von „Keine Verlängerung vor“ auf der Basis von: ___.

Werte:

• date

• exact time

  Hinweis

  Only relevant for loans calculated in days, hourly loans are not affected.

Beschreibung:

• This preference allows you to control how the ‚No renewal before“ option in the circulation and fines rules administration area.

NoticeBcc

Fragt: Schicke alle E-Mail-Benachrichtigungen an die folgende E-Mail-Adresse in BCC: ___.

This preference makes it so that a librarian can get a copy of every notice sent out to patrons.

Hinweis

If you’d like more than one person to receive the blind copy you can simply enter in multiple email addresses separated by commas.

OnSiteCheckoutAutoCheck

Voreinstellung: Nicht aktivieren

Fragt: ___ die Vor-Ort-Ausleihe-Checkbox automatisch, wenn die vorangegangene Ausleihe eine Vor-Ort-Ausleihe war.

Werte:

• Nicht aktivieren

• Aktiviere

Beschreibung:

• This preference allows you specify that if a preceding checkout was an onsite checkout, then the ‚On-site checkout‘ checkbox will be ticked ready for the next checkout.

OnSiteCheckouts

Voreinstellung: Deaktiviere

Asks: ___ the on-site checkouts feature.

Werte:

• Deaktiviere

• Aktiviere

  

Beschreibung:

• This preference lets you check out items that are ‚not for loan‘ to patrons. A checkbox is added to the checkout screen when this preference is set to ‚Enable‘ labeled ‚On-site checkout‘. This allows you to track who’s using items that are normally not for loan or are in a closed stack setting.

OnSiteCheckoutsForce

Voreinstellung: Deaktiviere

Fragt: ___ Vor-Ort-Ausleihen in allen Fällen (Sogar wenn der Benutzer gesperrt ist etc.).

Werte:

• Deaktiviere

• Aktiviere

  

Beschreibung:

• This preference lets the staff override any restrictions a patron might have and check out items for use within the library. The OnSiteCheckouts preference must first be set to ‚Enable‘ for this preference to be considered.

OPACFineNoRenewalsBlockAutoRenew

Standardwert: Ja

Asks: If a patron owes more than the value of OPACFineNoRenewals, ___ his/her auto renewals.

Werte:

• Erlaube

• Sperren

OverdueNoticeCalendar

Fragt: ___ bei der Berechnung des Versandzeitpunkts für Mahnbenachrichtigungen.

Default: Ignore calendar

Werte:

• Ignore calendar

  • Notices do not take holidays into account, so they will be sent even if holidays have meant the item is not actually overdue yet

• Verwende den Kalender

  • Notices take holidays into account, so they will not be sent if holidays mean the item is not actually overdue yet

OverdueNoticeFrom

Asks: Organize and send overdue notices using the ___.

Default: command-line option

Werte:

• command-line option

• item home library

• checkout library

• patron home library

  Version

  The „patron home library“ option was added in Koha version 23.11.

Beschreibung:

• This system preference determines which library’s information will be used in the overdue notices (if there is information in the notice template such as <<branches.branchname>> or <<branches.branchphone>>, or, in the new syntax, [% branch.branchname %] or [% branch.branchphone %]) and which email address will be used to send the notices.

• This system preference overrides the –frombranch parameter in the overdue_notices.pl cronjob.

• When set to „command-line option“, the library information will be that of the –frombranch parameter in the overdue_notices.pl cronjob or the checkout library if the parameter is absent.

• When set to „item home library“, the library information will be that of the overdue item’s home library.

• When set to „checkout library“, the library information will be that of the library at which the overdue item was checked out.

• When set to „patron home library“, the library information will be that of the library where the patron receiving the notice is from.

OverduesBlockCirc

Default: Ask for confirmation

Fragt: ___ Ausleihen an Benutzer mit überfälligen Medien.

Werte:

• Ask for confirmation

  • Will not let you check an item out to patrons with overdues until a librarian confirms that it is okay

• Sperren

  • Block all patrons with overdue items from being able to check out

• Don’t block

  • Allow all patrons with overdue items to continue to check out

OverduesBlockRenewing

Default: allow renewing

Fragt: Wenn ein Benutzer überfällige Medien auf dem Benuterkonto hat, ___

Werte:

• allow renewing

• block renewing for all the patron’s items

• block renewing for only this item

PrintNoticesMaxLines

Asks: Include up to ___ item lines in a printed overdue notice.

Hinweis

Exemplarzeilen in gedruckten Mahnschreiben. Wenn die Anzahl der angemahnten Exemplare größer als die Anzahl der Zeilen ist, endet die Benachrichtigung mit einem Hinweis, das Benutzerkonto auf die vollständige Liste der Exemplare zu prüfen. Bei 0 werden alle überfälligen Exemplare unabhängig von der Gesamtzahl gedruckt.

Hinweis

Set to 0 to include all overdue items in the notice, no matter how many there are.

Wichtig

This preference only refers to the print notices, not those sent via email.

RecordStaffUserOnCheckout

Asks: When checking out an item, ___ the user who checked out the item.

Default: don’t record

Werte:

• don’t record

• record

Beschreibung:

• This system preference determines whether the staff account who checks out an item to a patron is recorded along with the checkout.

• When set to ‚record‘ the staff account will be displayed in the staff interface in the patron’s circulation history as well as the record’s checkout history.

RenewAccruingItemInOpac

Fragt: Wenn ein Benutzer alle offenen Gebühren für ein Exemplar, das noch aktiv gemahnt wird, im OPAC über ein Bezahlplugin bezahlt, ___

Default: Don’t renew

Werte:

• Don’t renew

• Verlängern

Beschreibung:

• This system preference allows you to control whether or not overdue items are renewed if the patron pays the fine online.

  Hinweis

  If the RenewalPeriodBase system preference is set to ‚due date‘, renewed items may still be overdue even after renewal.

RenewAccruingItemWhenPaid

Fragt: Wenn ein Benutzer alle offenen Gebühren für ein Exemplar, das noch gemahnt wird, bezahlt, ___

Default: Don’t renew

Werte:

• Don’t renew

• Verlängern

Beschreibung:

• This system preference allows you to control whether or not overdue items are renewed if the fine is paid in the staff interface.

  Hinweis

  If the RenewalPeriodBase system preference is set to ‚due date‘, renewed items may still be overdue even after renewal.

RenewalPeriodBase

Default: the old due date of the checkout

Fragt: Bei der Verlängerung von Ausleihen basiert das neue Fälligkeitsdatum auf ___

Werte:

• the old due date of the checkout

• the current date

RenewalSendNotice

Voreinstellung: Nicht senden

Fragt: ____ Verlängerungsbenachrichtigung, wenn Ausleihquittungen für den Benutzer aktiviert sind.

Werte:

• Nicht verschicken

• Schicke

Beschreibung:

• If a patron has chosen to receive a check out notice in their messaging preferences and this preference is set to ‚Send‘ then those patrons will also receive a notice when they renew materials. You will want to set up a new notice with the code of RENEWAL (if you don’t already have it) with custom text for renewing items.

  Wichtig

  This preference requires that you have EnhancedMessagingPreferences set to ‚Allow‘

RentalFeesCheckoutConfirmation

Default: do not ask

Asks: When checking out an item with rental fees, ___ for confirmation.

Werte:

• ask

• do not ask

Beschreibung:

• If you are charging rental fees for items this preference will make it so that you can show (or not show) a confirmation before checking out an item that will incur a rental charge.

ReturnBeforeExpiry

Standardwert: Nein

Fragt: ___ dass Benutzer ihre Ausleihen zurückgeben, bevor ihr Benutzerkonto abläuft (indem die Fälligkeitsdaten auf ein Datum vor dem Ablaufdatum gesetzt werden).

Werte:

• Don’t require

• Erfordere

Beschreibung:

• This is preference may prevent a patron from having items checked out after their library card has expired. If this is set to „Require“, then a due date of any checked out item can not be set for a date which falls after the patron’s card expiration. If the setting is left „Don’t require“ then item check out dates may exceed the expiration date for the patron’s library card.

StaffSearchResultsDisplayBranch

Default: the library the item is held by

Fragt: In der Trefferliste in der Dienstoberfläche, zeige ___

Werte:

• the library the item is from

• the library the items is held by

SwitchOnSiteCheckouts

Default: Don’t switch

Fragt: ___ von Vor-Ort-Ausleihe zu normaler Ausleihe bei nochmaliger Ausleihe.

Werte:

• Don’t switch

• Switch

TransfersMaxDaysWarning

Asks: Show a warning on the „Transfers to receive“ screen if the transfer has not been received ___ days after it is sent.

Default: 3

Beschreibung:

• This system preference allows for a warning to appear after a set amount of time if an item being transferred between library branches has not been received. The warning will appear in the Transfers to receive report.

UnseenRenewals

Asks: ___ renewals to be recorded as „unseen“ by the library, and count against the patrons unseen renewals limit.

Default: Don’t allow

Werte:

• Erlaube nicht

• Erlaube

Beschreibung:

• This system preference enables the unseen renewals functionality. It allows staff to mark renewals as „unseen“, i.e. the staff didn’t actually see the item.

• If you activate this preference, make sure to add a value in the ‚Unseen renewals allowed (count)‘ column of the circulation and fine rules.

UpdateItemLocationOnCheckout

Version

This system preference was added in Koha version 23.11.

Fragt: Es ist eine Liste von Werte-Paaren. Direkt nach dem ersten Wert folgt ein Doppelpunkt, ein Leerzeichen und dann der zweite Wert.

Beschreibung:

• This system preference affects the item’s current and permanent locations when the item is checked out.

• Allgemeine Regel: Wenn der Standortcode auf der linken Seite des Doppelpunkts (:) mit dem aktuellen Standort des Exemplars übereinstimmt, wird der Standort entsprechend des Standortcodes auf der rechten Seite des Doppelpunkts (:) aktualisiert.

• The values are the LOC authorized values.

• For example, STAFF: GEN will move an item from the staff office to the general collection when the item is checked out.

• Special terms

  • PROC: Processing center. When using PROC, only the current location will be affected.

  • CART: Shelving cart. When using CART, only the current location will be affected.

  • _PERM_: This will use the item’s permanent location, whatever that location is.

  • _BLANK_: Used on the left as a first value, it will add a location if there is none. Used on the right as a second value, it will remove the location.

  • _ALL_: Used on the left as a first value, it will affect all items and override all other rules.

Warnung

Erfordert YAML-Syntax zum Funktionieren

This means

• Make sure there is NO space between the first value and the colon

• Make sure there IS a space between the colon and the second value

• Achten Sie darauf, dass jedes Paar in einer eigenen Zeile steht

• If using PROC or CART, use the cart_to_shelf cron job to return the items to their permanent location after a determined number of hours.

UpdateNotForLoanStatusOnCheckout

Asks: This is a list of value pairs. When an item is checked out, if the not for loan value on the left matches the items not for loan value it will be updated to the right-hand value.

Beschreibung:

• This system preference affects the item’s ‚not for loan‘ status when the item is checked out.

• Allgemeine Regel: Wenn der Standortcode auf der linken Seite des Doppelpunkts (:) mit dem aktuellen Standort des Exemplars übereinstimmt, wird der Standort entsprechend des Standortcodes auf der rechten Seite des Doppelpunkts (:) aktualisiert.

• The values are the NOT_LOAN authorized values.

• For example, ‚-1: 0‘ will cause an item that was set to ‚Ordered‘ to now be available for loan

• This system preference can also be used to only display the not for loan status. To do so, enter ONLYMESSAGE on the right of the colon. For example

  -1: ONLYMESSAGE
  

  This will simply show the label for -1 without changing the status.

Warnung

Erfordert YAML-Syntax zum Funktionieren

This means

• Make sure there is NO space between the first value and the colon

• Make sure there IS a space between the colon and the second value

• Achten Sie darauf, dass jedes Paar in einer eigenen Zeile steht

UseBranchTransferLimits and BranchTransferLimitsType

Defaults: Don’t enforce and collection code

Asks: ___ branch transfer limits based on ___

UseBranchTransferLimits Values:

• Don’t enforce

• Enforce

BranchTransferLimitsType Values:

• collection code

• item type

BranchTransferLimitsType Description:

• This parameter is a binary setting which determines whether items are transferred according to item type or collection code. This value determines how the library manager is able to restrict what items can be transferred between the branches.

useDaysMode

Fragt: ___ , wenn das Fälligkeitsdatum berechnet wird.

Default: Use the calendar to skip days the library is closed

Werte:

• Verwende den Kalender um Tage an denen die Bibliothek geschlossen hat zu übergehen

• Verwende den Kalender um das Fälligkeitsdatum auf den nächsten Öffnungstag zu schieben

• Ignoriere den Kalender

• Use the calendar to push the due date to the next open matching weekday for weekly loan periods, or the next open day otherwise (Note: This preference setting only works with loan periods in multiples of 7).

Beschreibung:

• This preference controls how scheduled library closures affect the due date of a material.

• The ‚Use the calendar to skip all days the library is closed‘ setting allows for a scheduled closure not to count as a day in the loan period.

• The ‚Ignore the calendar‘ setting would not consider the scheduled closure at all

• The ‚Use the calendar to push the due date to the next open day‘ would only affect the due date if the day the item is due would fall specifically on the day of closure.

• The final option, ‚Use the calendar to push the due date to the next open matching weekday for weekly loan periods, or the next open day otherwise‘ allows libraries to accommodate patrons who may only be able to visit the library on a certain day of the week, such as part-time students or patrons who rely on public transport.

Beispiel:

• The library has put December 24th and 25th in as closures on the calendar. A book checked out by a patron has a due date of December 25th according to the circulation and fine rules.

  • If this preference is set to ‚Ignore the calendar‘ then the item will remain due on the 25th.

  • If the preference is set to ‚Use the calendar to push the due date to the next open day‘, then the due date will be December 26th.

  • If the preference is set to ‚Use the calendar to skip all days the library is closed‘ then the due date will be pushed to the 27th of December to accommodate for the two closed days.

  • If the preference is set to ‚Use the calendar to push the due date to the next open matching weekday for weekly loan periods, or the next open day otherwise‘ the item would be due back on January 1st. If January 1st was also a closed day then the item would be due back on the next available open day.

The calendar is defined on a branch by branch basis. To learn more about the calendar, check out the Calendar section of this manual.

UseTransportCostMatrix

Standardwert: Nicht benutzen

Fragt: ___ die Transportkostentabelle zur Berechnung eines optimalen Vormerkungsservices zwischen den Bibliotheken.

Werte:

• Verwende keine

• Verwenden Sie

Beschreibung:

• If the system is configured to use the Transport cost matrix for filling holds, then when attempting to fill a hold, the system will search for the lowest cost branch, and attempt to fill the hold with an item from that branch first. Branches of equal cost will be selected from randomly. The branch or branches of the next highest cost shall be selected from only if all the branches in the previous group are unable to fill the hold.

  The system will use the item’s current holding branch when determining whether the item can fulfill a hold using the Transport Cost Matrix.

Course reserves

UseCourseReserves

Standardwert: Nicht benutzen

Fragt: ___ das Modul zur Verwaltung von Semesterapparaten

Werte:

• Verwende keine

• Verwenden Sie

Beschreibung:

• Das Modul zur Verwaltung von Semesterapparaten erlaubt es, Exemplare temporär in einen Semesterapparat zu stellen und mit anderen Ausleihkonditionen zu verknüpfen, während sie für den Kurs verwendet werden.

Curbside pickup module

CurbsidePickup

Asks: ___ the curbside pickup module.

Werte:

• Deaktiviere

• Aktiviere

Voreinstellung: Deaktiviere

Beschreibung:

• This system preference is the main switch for the curbside pickup module.

Fines policy

finesCalendar

Fragt: ___ bei der Berechnung von Mahngebühren.

Default: Use the calendar

Werte:

• Ignoriere den Kalender

• Use the calendar

Beschreibung:

• This preference will determine whether or not fines will be accrued on days where the library is closed. Examples include holidays, library in-service days, etc.

• If set to ‚Use the calendar‘, Koha will skip closed days when calculating the overdue fines.

• If set to ‚Ignore the calendar‘, fines will be calculated directly, with no consideration of closed days.

Wichtig

To make use of this setting your system administrator must first access Koha’s :ref:calendar<calendar-label>` and mark closed days as ‚holidays‘ ahead of time.

The calendar is defined on a branch by branch basis. To learn more about the calendar, check out the calendar section of this manual.

FinesIncludeGracePeriod

Default: Include

Fragt: ___ die Gnadenfrist für die Berechnung der Gebühren.

Werte:

• Don’t include

• Include

Beschreibung:

• This preference lets you control how Koha calculates fines when there is a grace period. If you choose to include the grace period when calculating fines then Koha will charge for the days in the grace period should the item be overdue more than those days. If you choose not to include the grace period then Koha will only charge for the days overdue after the grace period.

finesMode

Asks: ___ fines

Default: Don’t calculate

Werte:

• Don’t calculate

• Calculate and charge

  Wichtig

  If this system preference is set to ‚Calculate and charge‘, you must either add the fines cron job to your crontab, or enable CalculateFinesOnReturn

  Wenn cronjobs/fines.pl ausgeführt wird, werden laufenden und finale Mahngebühren berechnet wenn der Cronjob läuft und laufende Mahngebühren werden zu finalen, wenn das Exemplar zurückgegeben wird. Wenn CalculateFinesOnReturn aktiv ist, werden finale Mahngebühren auch bei der Rückgabe berechnet.

HoldFeeMode

Default: only if all items are checked out and the record has at least one hold already.

Asks: Charge a hold fee ___

Werte:

• any time a hold is collected.

• any time a hold is placed.

• only if all items are checked out and the record has at least one hold already.

NoRefundOnLostReturnedItemsAge

Asks: Don’t refund lost fees if a lost item is checked in more than ___ days after it was marked lost.

Beschreibung:

• Enter a number of days after which lost items are not refunded.

Hinweis

Legen Sie die Rückerstattungsregel in den ref:Standardregeln für die Rückerstattung bei Medienverlust <item-fee-refund-on-return-label> im Bereich ref:Ausleihkonditionen <circulation-and-fines-rules-label> fest.

ProcessingFeeNote

Asks: Set the text to be recorded in the column ‚note‘, table ‚accountlines‘ when the processing fee (defined in item type) is applied.

RefundLostOnReturnControl

Wenn ein als verloren markiertes Exemplar zurückgegeben wird, gelten die Rückerstattungsregeln für die ___

Default: check-in library.

Werte:

• check-in library.

• item holding branch.

• item home branch.

Beschreibung:

• Dies bezieht sich auf die Standardregeln für die Rückerstattung bei Medienverlust im Bereich Ausleihkonditionen.

Hinweis

You can limit the number of days after which a lost item is not refunded using the NoRefundOnLostReturnedItemsAge system preference.

SuspensionsCalendar

Default: not including the days the library is closed

Fragt: ___ bei der Berechnung der Sperrtage.

Werte:

• Ignoriere den Kalender

• Use the calendar

Beschreibung:

• This system preference determines whether the calendar is taken into account when making suspension calculations. Suspension rules can be configured within the circulation rules. If set to ‘directly’ the suspension period will ignore any closed days that have been added to the calendar. If set to ‘not including the days the library is closed’ any days marked as closed within the calendar will be skipped when calculating the end date for the suspension.

useDefaultReplacementCost

Standardwert: Nicht benutzen

Fragt: __die im Medientyp definierten Wiederbeschaffungskosten.

Werte:

• Verwende keine

• Verwenden Sie

Beschreibung:

• This preference enables the use of the replacement cost set on the item type level

WhenLostChargeReplacementFee

Default: Charge

Fragt: ___ den Buchersatzpreis, wenn ein Benutzer ein Exemplar verloren meldet.

Werte:

• Gebühr

• Don’t charge

Beschreibung:

• This preference lets you tell Koha what to do with an item is marked lost. If you want Koha can ‚Charge‘ the patron the replacement fee listed on the item they lost or it can do nothing in reference to the patron and just mark the item lost in the catalog.

WhenLostForgiveFine

Default: Don’t forgive

Asks: ___ the fines on an item when it is lost.

Werte:

• Don’t forgive

• Forgive

Beschreibung:

• This preference allows the library to decide if fines are charged in addition to the replacement fee when an item is marked as lost. If this preference is set to ‚Forgive‘ then the patron won’t be charged fines in addition to the replacement fee.

Holds policy

AllowHoldDateInFuture

Standardwert: Ja

Fragt: ___Vormerkungen, die erst zu einem zukünftigen Zeitpunkt in der Vormerkliste erscheinen.

Werte:

• Erlaube

• Erlaube nicht

AllowHoldItemTypeSelection

Fragt: ___ die auf Medientypen bezogene Beschränkung von Vormerkungen.

Default: Don’t allow

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• If this system preference is set to ‚Allow‘, staff and patrons will be able to choose a specific item type when placing a hold in the staff interface or placing a hold in the OPAC.

AllowHoldPolicyOverride

Standardwert: Ja

Fragt: ___, dass Mitarbeiter die Vormerkbeschränkungen beim Eintragen von Vormerkungen übergehen können.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This preference is a binary setting which controls whether or not the library staff can override the circulation and fines rules as they pertain to the placement of holds. Setting this value to „Don’t allow“ will prevent anyone from overriding, setting it to „Allow“ will allow it. This setting is important because it determines how strict the libraries rules for placing holds are. If this is set to „Allow“, exceptions can be made for patrons who are otherwise normally in good standing with the library, but there is opportunity for the staff to abuse this function. If it is set to „Don’t allow“, no abuse of the system is possible, but it makes the system entirely inflexible in respect to holds.

AllowHoldsOnDamagedItems

Standardwert: Ja

Fragt: ___ Vormerkungen auf beschädigte Exemplare vorzunehmen oder auszuführen.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This parameter is a binary setting which controls whether or not hold requests can be placed on items that are marked as „damaged“ (items are marked as damaged by editing subfield 4 on the item record). Setting this value to „Don’t allow“ will prevent anyone from placing a hold on such items, setting it to „Allow“ will allow it. This preference is important because it determines whether or not a patron can place a request for an item that might be in the process of being repaired or not in good condition. The library may wish to set this to „Don’t allow“ if they were concerned about their patrons not receiving the item in a timely manner or at all (if it is determined that the item is beyond repair). Setting it to „Allow“ would allow a patron to place a hold on an item and therefore receive it as soon as it becomes available.

AllowHoldsOnPatronsPossessions

Standardwert: Ja

Fragt: ____ Vormerkungen durch den Benutzer auf Titel, bei denen der Benutzer bereits eines oder mehrere Exemplare des Titels ausgeliehen hat.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• By setting to „Don’t allow,“ you can prevent patrons from placing holds on items they already have out, thus preventing them from blocking anyone else from getting an item.

AllowRenewalIfOtherItemsAvailable

Default: Don’t allow

Fragt: ___ dass Benutzer ein Exemplar verlängern, welches eine Vormerkung erfüllen könnte, auch wenn es weitere verfügbare Exemplare gibt, welche die Vormerkung erfüllen können.

Werte:

• Erlaube

• Erlaube nicht

AutomaticCheckinAutoFill

Version

This system preference was added to Koha in version 23.11.

Asks: ___ holds to be automatically filled after being automatically checked in.

Default: Don’t allow

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This system preference is used when automatic check-in is enabled.

• Upon check-in, the next hold will be automatically filled and a notification will be sent to the patron to let them know that their hold is waiting.

• This system preference requires the automatic_checkin.pl cronjob.

Ausgesetzte Vormerkungen reaktivieren

Standardwert: Ja

Fragt: ___ dass ausgesetzte Vormerkungen automatisch zum angegebenen Datum reaktiviert werden.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• If this preference is set to ‚Allow‘ then all suspended holds will be able to have a date at after which they automatically become unsuspended. If you have this preference set to ‚Allow‘ you will also need the Unsuspend Holds cron job running.

  Wichtig

  The holds will become unsuspended the date after that entered by the patron.

CanMarkHoldsToPullAsLost

Asks: ___ from the ‚Holds to pull‘ screen

Default: Do not allow to mark items as lost

Werte:

• Allow to mark items as lost

• Allow to mark items as lost and notify the patron

• Do not allow to mark items as lot

Beschreibung:

• This preference lets you choose whether the staff can mark items as lost directly from the ‚Holds to pull‘ list if they can’t find the item on the shelf.

• The actual lost value that will be assigned to the item is defined in the UpdateItemWhenLostFromHoldList system preference.

• If the patron is notified, the message sent will be based on the CANCEL_HOLD_ON_LOST template. It can be customized in the Notices and slips tool.

Warnung

This only applies to item-level holds.

canreservefromotherbranches

Standardwert: Ja

Fragt: ___ dass Benutzer einer Bibliothek Vormerkungen auf Exemplare einer anderen Bibliothek setzen können

Beschreibung:

• This preference is a binary setting which determines whether patrons can place holds on items from other branches. If the preference is set to „Allow“ patrons can place such holds, if it is set to „Don’t allow“ they cannot. This is an important setting because it determines if users can use Koha to request items from another branch. If the library is sharing an installation of Koha with other independent libraries which do not wish to allow interlibrary borrowing it is recommended that this parameter be set to „Don’t allow“.

Werte:

• Erlaube

• Don’t allow (with IndependentBranches)

ConfirmFutureHolds

Standardwert: 0

Asks: Confirm future hold requests (starting no later than ___ days from now) at checkin time.

Beschreibung:

• When confirming a hold at checkin time, the number of days in this preference is taken into account when deciding which holds to show alerts for. This preference does not interfere with renewing, checking out or transferring a book.

  Hinweis

  This number of days will be used too in calculating the default end date for the Holds to pull-report. But it does not interfere with issuing, renewing or transferring books.

  Wichtig

  This preference is only looked at if you’re allowing hold dates in the future with AllowHoldDateInFuture or OPACAllowHoldDateInFuture

decreaseLoanHighHolds, decreaseLoanHighHoldsDuration, decreaseLoanHighHoldsValue, decreaseLoanHighHoldsControl, and decreaseLoanHighHoldsIgnoreStatuses

Asks: ___ the reduction of loan period ___ to days for high demand items with more than ___ holds ___ . Ignore items with the following statuses when counting items ___

decreaseLoanHighHolds default: Don’t enable

decreaseLoanHighHoldsControl default: on the record

Werte:

decreaseLoanHighHolds

• Nicht aktivieren

• Aktiviere

decreaseLoanHighHoldsControl

• over the number of holdable items on the records

• on the record

decreaseLoanHighHoldsIgnoreStatuses

• [Select All]

• Damaged

• Vermisst

• Nicht ausleihbar

• Ausgeschieden

Beschreibung:

• These preferences let you change the loan length for items that have many holds on them. This will not affect items that are already checked out, but items that are checked out after the decreaseLoanHighHoldsValue is met will only be checked out for the number of days entered in the decreaseLoanHighHoldsDuration preference.

  

DefaultHoldPickupLocation

Asks: When placing a hold via the staff interface default the pickup location to the ___ .

Werte:

• item’s holding library

• item’s home library

• logged in library

Default: logged in library

Beschreibung:

• This system preference lets you determine which library is the default pickup location while placing holds in the staff interface.

Warnung

This system preference only applies to item-level holds.

DisplayMultiItemHolds

Version

Dieser Parameter wurde mit der Koha-Version 24.05 eingeführt.

Asks: ___ the ability to place holds on different items at the same time in staff interface and OPAC.

Werte:

• Nicht aktivieren

• Aktiviere

Voreinstellung: Nicht aktivieren

Beschreibung:

• This system preference is used to enable the possibility of placing multiple item-level holds on one record.

• If enabled, staff and patrons will be able to select multiple items in the ‚Hold a specific item‘ section.

• This system preference applies to both the staff interface and the OPAC.

• For this feature to work, circulation rules must allow multiple holds per record.

DisplayMultiPlaceHold

Voreinstellung: Nicht aktivieren

Fragt: ___ die Möglichkeit mehrere Titel auf einmal aus der Trefferliste heraus vorzumerken.

Werte:

• Nicht aktivieren

• Aktiviere

emailLibrarianWhenHoldIsPlaced

Voreinstellung: Nicht aktivieren

Fragt: ___ den Versand von E-Mails an den Koha-Administrator, wenn eine Vormerkung gesetzt wurde.

Werte:

• Nicht aktivieren

• Aktiviere

Beschreibung:

• This preference enables Koha to email the library staff whenever a patron requests an item to be held. While this function will immediately alert the librarian to the patron’s need, it is extremely impractical in most library settings. In most libraries the hold lists are monitored and maintained from a separate interface. That said, many libraries that allow on shelf holds prefer to have this preference turned on so that they are alerted to pull an item from the shelf.

  Wichtig

  In order for this email to send you must have a notice template with the code of HOLDPLACED

  Wichtig

  This notice will only be sent if the process_message_queue.pl cron job is being run periodically to send the messages.

EmailPatronWhenHoldIsPlaced

Version

This system preference was added to Koha in version 23.11.

Asks: ___ a patron when they have placed a hold.

Default: Don’t email

Werte:

• Don’t email

• Email

Beschreibung:

• This system preference determines whether an email is sent to the patron after they place a hold.

• The notice sent is based on the HOLDPLACED_PATRON template, which can be customized in the notices and slips tool.

EnableItemGroupHolds

Asks: ___ the ability to place holds on item groups.

Werte:

• Nicht aktivieren

• Aktiviere

Voreinstellung: Nicht aktivieren

Beschreibung:

• This system preference allows users to place holds on item groups.

• This is useful if you need to place holds on a subset of items on a bibliographic record, rather than a specific item or the next available item.

• Requires EnableItemGroups

EnableItemGroups

Achtung

As of version 23.11 of Koha, this system preference is under cataloging preferences.

See EnableItemGroups.

Asks: ___ the item groups feature to allow collecting groups of items on a record together.

Beschreibung:

• This system preference enables the item groups feature.

• It can be used with EnableItemGroupHolds to allow holds on item groups.

ExcludeHolidaysFromMaxPickUpDelay

Asks: ___ when calculating the period for a hold’s max pickup delay.

Default: Ignore the calendar

Werte:

• Ignoriere den Kalender

• Use the calendar

Beschreibung:

• This system preference determines whether or not closed days in the calendar are taken into account when calculating the time period for patrons to pick up their holds (see ReservesMaxPickUpDelay).

• If set to ‚Ignore the calendar‘, the pickup delay will be calculated directly.

• If set to ‚Use the calendar‘, holidays will be excluded from the pickup delay.

ExpireReservesMaxPickUpDelay

Default: Don’t allow

Asks: ___ holds to expire automatically if they have not been picked by within the time period specified in ReservesMaxPickUpDelay

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• If set to ‚allow‘ this will cancel holds that have been waiting for longer than the number of days specified in the ReservesMaxPickUpDelay system preference. Holds will only be cancelled if the Expire Holds cron job is running.

ExpireReservesAutoFill

Asks: ___ automatically fill the next hold using the item.

Voreinstellung: Keine Zusammenfassung

Werte:

• Don’t

• Do

Beschreibung:

• If ExpireReservesMaxPickUpDelay is set to ‚Allow‘, you can choose to automatically fill the next hold when a hold is cancelled.

• If this system preference is set to „Don’t“, the expired hold will be cancelled, but the item will not be used to fill the next hold, if there is one. Staff must manually check in the item in order to trigger the next hold.

• If this system preference is set to „Do“, the item will be used to fill the next hold, if there is one, without manual input from staff members.

  • If they opted to receive ‚Hold filled‘ notices, a notification will be sent to the next patron to advise them that they can now come pick up their hold.

    Bemerkung

    The notice sent is based on the HOLD template, which can be customized in the Notices and slips tool.

  • A notification will also be sent to the email address in ExpireReservesAutoFillEmail to alert staff that the hold is now waiting for someone else.

    Bemerkung

    The notice sent is based on the HOLD_CHANGED template, which can be customized in the Notices and slips tool.

Warnung

This system preference will not have any effect unless ExpireReservesMaxPickUpDelay is set to ‚Allow‘.

ExpireReservesAutoFillEmail

Asks: Send email notification of the new hold filled with a canceled item to ___.

Beschreibung:

• If ExpireReservesMaxPickUpDelay is set to ‚Allow‘, and ExpireReservesAutoFill is set to ‚Do‘, an email will be sent to alert staff that the hold is now waiting for someone else.

  Bemerkung

  The notice sent is based on the HOLD_CHANGED template, which can be customized in the Notices and slips tool.

• If this system preference is empty, the notification will be sent to the library’s reply-to address.

Warnung

This system preference will not have any effect unless ExpireReservesAutoFill is set to ‚Do‘.

ExpireReservesMaxPickUpDelayCharge

Standardwert: 0

Asks: If using ExpireReservesMaxPickUpDelay, charge a borrower who allows his or her waiting hold to expire a fee of ___ USD

Beschreibung:

• If you are expiring holds that have been waiting too long you can use this preference to charge the patron for not picking up their hold. If you don’t charge patrons for items that aren’t picked up you can leave this set to the default which is 0. Holds will only be cancelled and charged if the Expire Holds cron job is running.

ExpireReservesOnHolidays

Standardwert: Ja

Asks: If using ExpireReservesMaxPickUpDelay, ___ expired holds to be canceled on days the library is closed per the calendar.

Werte:

• Erlaube

• Erlaube nicht

HoldRatioDefault

Version

Dieser Parameter wurde mit der Koha-Version 24.05 eingeführt.

Asks: Default the holds ratio report to ___.

Default: 3

Beschreibung:

• This system preference determines the default value for the hold ratios report.

HoldsQueuePrioritizeBranch

Asks: The holds queue should prioritize filling a hold by matching the patron’s home library with an item having a matching ___.

Werte:

• holding library (holdingbranch)

• home library (homebranch)

Default: home library (homebranch)

Beschreibung:

• This system preference determines whether a hold should be filled in priority by an item currently at the library the hold will be collected from (holding library option) or by an item whose home library matches the pickup library (home library option).

• Setting this preference to ‚holding library (holdingbranch)‘ will help minimize the number of items transferred between libraries.

• This preference may be of special interest to library services that float items (who have set the Return policy in the Default holds policy by item type to either ‚Item floats‘ or ‚Item floats by library group‘). These services will likely have many items whose holding library does not match the home library.

• This preference can be used either on its own or in conjunction with the LocalHoldsPriority, LocalHoldsPriorityPatronControl and LocalHoldsPriorityItemControl preferences. After checking LocalHoldsPriority, Koha will look at HoldsQueuePrioritizeBranch to decide how to fill the waiting holds.

  Bemerkung

  The difference between HoldsQueuePrioritizeBranch on one hand and LocalHoldsPriority, LocalHoldsPriorityPatronControl, LocalHoldsPriorityItemControl on the other is that the first only affects which item is chosen to fill a hold, whereas the latter apply to which patron is given priority in getting that item.

HoldsSplitQueue

Default: nothing

Teile die Liste der Vormerkungen in mehrere Tabellen nach ___

Werte:

• pickup library

• pickup library and itemtype

• hold itemtype

• nothing

Beschreibung:

• This feature allows you to separate holds by pickup library or itemtype in the holds page of a record (not in the global holds queue found on the circulation page).

• When using the up and down arrows the priorities will be changed only in the group the holds belongs to.

HoldsSplitQueueNumbering

Default: the actual priority, which may be out of order

Wenn die Liste der Vormerkungen geteilt wird, zeige dem Bibliothekspersonal ___

Werte:

• the actual priority, which may be out of order

• ‚virtual‘ priorities, where each group is numbered separately

Beschreibung:

• This system preference is only effective if HoldsSplitQueue is set to any value except ‚nothing‘.

• This system preference controls the priority numbering on the holds page of a record (not in the global holds queue found on the circulation page).

LocalHoldsPriority, LocalHoldsPriorityPatronControl, LocalHoldsPriorityItemControl

Asks: ___ priority for filling holds to patrons whose ___ matches the item’s ___

LocalHoldsPriority Values:

• Don’t give

• Give

LocalHoldsPriorityPatronControl Values:

• home library

• pickup library

LocalHoldsPriorityItemControl Values:

• holding library

• home library

Beschreibung:

• This feature will allow libraries to specify that, when an item is returned, a local hold may be given priority for fulfillment even though it is of lower priority in the list of unfilled holds.

• This means that when LocalHoldsPriority is set to ‚Give‘, matching patrons will potentially jump the queue and be given priority for the item over other patrons whose holds were placed earlier.

• Prioritization of items in the holds queue can be refined using the HoldsQueuePrioritizeBranch system preference.

maxreserves

Standard: 50

Asks: Patrons can only have ___ holds at once.

OPACAllowHoldDateInFuture

Standardwert: Ja

Fragt: ___ Vormerkungen von Benutzern, die erst zu einem zukünftigen Zeitpunkt in der Vormerkliste erscheinen.

Werte:

• Erlaube

  • AllowHoldDateInFuture must also be enabled for this to work

• Erlaube nicht

OPACAllowUserToChangeBranch

Asks: Allow users to change the library to pick up a hold for these statuses: ___

Standardwert: Keine

Values (multiple values allowed):

• [Alle auswählen]

• In transit

• Pending

• Suspended

Beschreibung:

• This system preference is used to allow patrons to change the pickup location of their holds through their account in the OPAC.

• This system preference allows multiple values. Check all that apply.

• By default, patrons cannot change the pickup location of their holds from the OPAC.

• When one or more status is selected, a ‚Change‘ link will appear under the current pickup library’s name for holds that have that status in the holds tab of the patron’s account.

  

OPACAllowUserToChooseBranch

Standardwert: Ja

Fragt: ___ dass Benutzer die Bibliothek auswählen, in der sie eine Vormerkung abholen möchten.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• Changing this preference will not prevent staff from being able to transfer titles from one library to another to fill a hold, it will only prevent patrons from saying they plan on picking a book up at a library other than their home library.

• The list of available pickup locations will include all libraries that have ‚Pickup location‘ set to ‚Yes‘ on the library configuration page.

OPACHoldsIfAvailableAtPickup

Standardwert: Ja

Fragt: ___ die Abholung von Vormerkungen in Bibliotheken, in denen Exemplare verfügbar sind.

Werte:

• Erlaube nicht

• Erlaube

Beschreibung:

• Prevents borrowers from requesting items that are on the shelf at the same branch at which they wish to pick up those items.

OPACHoldsIfAvailableAtPickupExceptions

Asks: Patron categories not affected by OPACHoldsIfAvailableAtPickup: ___

Werte:

• Values are the patron categories; multiple categories can be selected.

Standardwert: Keine

Beschreibung:

• Patron categories selected here are unaffected by OPACHoldsIfAvailableAtPickup.

RealTimeHoldsQueue

Asks: ___ updating the holds queue in real time.

Voreinstellung: Deaktiviere

Werte:

• Deaktiviere

• Aktiviere

Beschreibung:

• This system preference is used to enable the automatic updating of the holds queue.

• If this system preference is set to ‚Disable‘, the build_holds_queue.pl cronjob should be run regularly to build the holds queue.

ReservesControlBranch

Default: item’s home library

Fragt: Prüfe die Regel der ___ darauf, ob der Benutzer eine Vormerkung auf das Exemplar setzen kann.

Werte:

• item’s home library.

• patron’s home library.

ReservesMaxPickUpDelay

Default: 7

Markiere eine Vormerkung als problematisch, wenn sie länger als ___ Tage zurückliegt.

Beschreibung:

• This preference (based on calendar days, not the Koha holiday calendar) puts an expiration date on an item a patron has on hold. After this expiration date the staff will have the option to release the unclaimed hold which then may be returned to the library shelf or issued to the next patron on the item’s hold list. Items that are ‚expired‘ by this preference are moved to the ‚Holds Over‘ tab on the Holds Awaiting Pickup report.

Bemerkung

This can be set at a more granular level in the circulation and fine rules.

ReservesNeedReturns

Default: Don’t automatically

Fragt: ___ auf Abholbereit setzen, wenn eine Vormerkung auf ein bestimmtes Exemplar gesetzt wird, welches bereits zurückgebucht wurde.

Werte:

• Automatically

• Don’t automatically

Beschreibung:

• This preference refers to ‚item specific‘ holds where the item is currently on the library shelf. This preference allows a library to decide whether an ‚item specific‘ hold is marked as „Waiting“ at the time the hold is placed or if the item will be marked as „Waiting“ after the item is checked in. This preference will tell the patron that their item is ‚Waiting‘ for them at their library and ready for check out.

StaticHoldsQueueWeight, HoldsQueueSkipClosed and RandomizeHoldsQueueWeight

StaticHoldsQueueWeight Default: 0

HoldsQueueSkipClosed Default: open or closed

RandomizeHoldsQueueWeight Default: in that order

Fragt: Vormerkungen mit Exemplaren von folgenden Bibliotheken bedienen ___ (Bibliothekscodes, getrennt mit Komma; wenn leer, werden alle Bibliotheken verwendet), wenn ___ ___.

HoldsQueueSkipClosed Values:

• open or closed

• open

RandomizeHoldsQueueWeight Values:

• in beliebiger Reihenfolge

  • If StaticHoldsQueueWeight is left at the default Koha will randomize all libraries, otherwise it will randomize the libraries listed.

• in dieser Reihenfolge

  • If StaticHoldsQueueWeight is left at the default then this will use all of your branches in alphabetical order, otherwise it will use the branches in the order that you entered them in the StaticHoldsQueueWeight preference.

Beschreibung:

• These preferences control how the Holds Queue report is generated using a cron job.

  Wenn nicht alle Bibliotheken verfügbare Exemplare ausheben und bereitstellen, sollten Sie hier alle *teilnehmenden* Bibliotheken mit ihren Bibliothekskürzeln auflisten, getrennt mit Komma ( z.B. „MPL,CPL,SPL,BML“ usw. ).

  Als Voreinstellung versucht das System eine Vormerkung zunächst mit einem vorhandenen Exemplar in der gewählten Abholbibliothek zu erfüllen. Sind dort keine verfügbaren Exemplare vorhanden, verwendet das Script build_holds_queue.pl die in StaticHoldsQueueWeight definierte Bibliotheksliste um ein Exemplar zu finden. Wenn RandomizeHoldsQueueWeight ausgeschaltet ist (Voreinstellung), versucht das Script die Anforderung in der Reihenfolge zu erfüllen, in der die Bibliotheken im Systemparameter StaticHoldsQueueWeight eingetragen sind.

  Wenn Sie zum Beispiel ein System mit drei Bibliotheken unterschiedlicher Größen haben (small, medium, large ) und Sie die Last der Vormerkungen entsprechend verteilen wollen, können Sie bei StaticHoldsQueueWeight zum Beispiel „LRG,MED,SML“ definieren.

  Wenn Sie die Last der Vormerkungen gleichmäßig auf alle Bibliotheken verteilen wollen, schalten Sie den Systemparameter ‚RandomizeHoldsQueueWeight‘ ein. Auf diese Weise wird jedesmal, wenn die Liste generiert wird, die Reihenfolge der betroffenen Bibliotheken zufällig neu gemischt.

  Wichtig

  The Transport Cost Matrix takes precedence in controlling where holds are filled from, if the matrix is not used then Koha checks the StaticHoldsQueueWeight. To use the Transport Cost Matrix simply set your UseTransportCostMatrix preference to ‚Use‘

SuspendHoldsIntranet

Standardwert: Ja

Fragt: ___ dass Vormerkungen über die Dienstoberfläche ausgesetzt werden können.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• The holds suspension feature can be turned on and off in the staff client by altering this system preference. If this is set to ‚allow‘ you will want to set the AutoResumeSuspendedHolds system preference.

SuspendHoldsOpac

Standardwert: Ja

Fragt: ___ dass Vormerkungen im OPAC ausgesetzt werden.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• The holds suspension feature can be turned on and off in the OPAC by altering this system preference. If this is set to ‚allow‘ you will want to set the AutoResumeSuspendedHolds system preference.

TransferWhenCancelAllWaitingHolds

Default: Don’t transfer

Fragt: ___ der Vormerkungen, wenn alle wartenden Vormerkungen storniert werden.

Werte:

• Don’t transfer

• Transfer

Beschreibung:

• When TransferWhenCancelAllWaitingHolds is set to „Don’t transfer“, no branch transfer records are created. Koha will not allow the holds to be transferred, because that would orphan the items at the library where the holds were awaiting pickup, without any further instruction to staff as to what items are at the library or where they need to go. When that system preference set to „Transfer“, branch transfers are created, so the holds may be cancelled.

UpdateItemWhenLostFromHoldList

Asks: Update item’s values when marked as lost from the hold to pull screen.

Beschreibung:

• This is a list of values to update an item when it is marked as lost from the holds to pull screen. For example, write „itemlost: 1“ to set the items. itemlost value to 1 when the item is marked as lost. This will use the authorized value 1 from the LOST authorized value category.

• Examples of keywords:

  • itemlost: lost status, uses the LOST authorized value category

  • notforloan: not for loan status, uses the NOT_LOAN authorized value category

  • withdrawn: withdrawn status, uses the WITHDRAWN authorized value category

  • damaged: damaged status, uses the DAMAGED authorized value category

  • location: location code, uses the LOC authorized value category

  • ccode: collection code, uses the CCODE authorized value category

• This preference requires that the CanMarkHoldsToPullAsLost system preference be set to either ‚Allow‘ option

Warnung

Requires YAML syntax to work.

This means

• Achten Sie darauf, dass zwischen dem Feldnamen und dem Doppelpunkt KEIN Leerzeichen steht

• Stellen Sie sicher, dass zwischen dem Doppelpunkt und dem Wert ein Leerzeichen steht

• Achten Sie darauf, dass jedes Paar in einer eigenen Zeile steht

Housebound module

HouseboundModule

Voreinstellung: Deaktiviere

Asks: ___ housebound module

Werte:

• Deaktiviere

• Aktiviere

Beschreibung:

• This preference enables or disables the Housebound module which handles management of circulation to Housebound readers.

Benutzeroberfläche

AllowAllMessageDeletion

Default: Don’t allow

Fragt: ___ dass Mitarbeiter Benachrichtigungen anderer Bibliotheken löschen.

Werte:

• Erlaube

• Erlaube nicht

AllowCheckoutNotes

Default: Don’t allow

Fragt: ___ das Senden von Benutzernotizen zu ausgeliehenen Exemplaren.

Werte:

• Erlaube nicht

• Erlaube

This preference if set to allow will give your patrons the option to add a note to an item they have checked out on the OPAC side. This note will be seen on the staff side when the item is checked in.

AllowOfflineCirculation

Achtung

This system preference was removed in Koha version 23.11. The offline circulation module was deprecated. Only the Firefox plugin and Windows tool are now supported.

Default: Do not enable

Asks: ___ offline circulation on regular circulation computers.

Werte:

• Do not enable

• Aktiviere

Beschreibung:

• Setting this preference to ‚Enable‘ allows you to use the Koha interface for offline circulation. This system preference does not affect the Firefox plugin or the desktop application, any of these three options can be used for offline circulation without effecting the other.

AutoSwitchPatron

Asks: ___ the automatic redirection to another patron when a patron cardnumber is scanned instead of an item barcode.

Voreinstellung: Nicht aktivieren

Werte:

• Nicht aktivieren

• Aktiviere

Beschreibung:

• Enabling this system preference allows staff to scan a patron barcode instead of an item barcode in the checkout box to switch patron records.

Warnung

This should not be enabled if you have overlapping patron cardnumbers and item barcodes.

CircAutoPrintQuickSlip

Asks: When an empty barcode field is submitted in circulation ___ .

Default: open a print quick slip window

Werte:

• clear the screen

• do nothing

  Version

  The option to ‚do nothing‘ was added to Koha in version 24.05.

• open a print quick slip window

• open a print slip window

Beschreibung:

• If this preference is set to open a quick slip (ISSUEQSLIP) or open a slip (ISSUESLIP) for printing it will eliminate the need for the librarian to click the print button to generate a checkout receipt for the patron they’re checking out to. If the preference is set to clear the screen then „checking out“ an empty barcode will clear the screen of the patron you were last working with.

CircConfirmItemParts

Asks: ___ staff to confirm that all parts of an item are present at checkin/checkout.

Standardwert: Nein

Werte:

• Don’t require

• Erfordere

Beschreibung:

• This system preference controls whether a message or an alert asking for confirmation is shown when checking out or checking in an item with accompanying materials.

• The message/alert will appear if the item has a value in the „3 - Materials specified (bound volume or other part)“ item field (952$3)

• If the value is set to „Don’t require“, a simple message will appear at checkin and checkout

  

• If the value is set to „Require“, there will be an alert asking staff to confirm that they checked that all parts are present

  At checkout

  

  At checkin

  

CircSidebar

Default: Deactivate

Fragt: ___ die seitliche Navigationsleiste auf allen Seiten der Ausleihe.

Werte:

• Deactivate

• Aktivieren

DisplayClearScreenButton

Asks: ___ to clear the current patron from the screen on the circulation screen.

Werte:

• Show print quick slip and clear buttons

• Show print slip and clear buttons

• Don’t show clear screen button

Default: Don’t show clear screen button

Beschreibung:

• This system preference is used to display a small button in the corner of the checkout box to print either the quick slip or the slip, and go back to the main checkout page

  

ExportCircHistory

Asks: ___ the option to export patron checkouts.

Default: Don’t show

Werte:

• Zeige nicht

• Zeige

Beschreibung:

• This system preference enables the option to export patrons‘ checkouts in MARC or CSV format.

Warnung

Contrary to what its name suggests, this option is not available for the patrons‘ checkout history. It is only for current checkouts.

ExportRemoveFields

Asks: The following fields should be excluded from the patron checkout CSV or MARC (ISO 2709) export: ___

Beschreibung:

• This space separated list of fields (e.g. 100a 245b) will automatically be excluded when exporting the patron’s current checkouts.

  

• This system preference requires that ExportCircHistory be enabled.

FilterBeforeOverdueReport

Standardwert: Nein

Fragt: ___ dass Mitarbeiter auswählen, welche Ausleihen gezeigt werden sollen, bevor der Überfälligkeiten-Report ausgeführt wird.

Beschreibung:

• Koha’s overdue report shows you all of the overdue items in your library system. If you have a large library system you’ll want to set this preference to ‚Require‘ to force those running the report to first limit the data generated to a branch, date range, patron category or other such filter. Requiring that the report be filtered before it’s run prevents your staff from running a system heavy report and slowing down other operations in the system.

  

Werte:

• Don’t require

• Erfordere

FineNotifyAtCheckin

Default: Don’t notify

Fragt: ___ Hinweis im Rückgabefenster, wenn Medien von einem Benutzer mit Mahngebühren zurückgebucht werden.

Werte:

• Don’t notify

• Notify

Beschreibung:

• With this preference set to ‚Notify‘ all books that have overdue fines owed on them will pop up a warning when checking them in. This warning will need to acknowledged before you can continue checking items in. With this preference set to ‚Don’t notify,^ you will still see fines owed on the patron record, you just won’t have an additional notification at check in.

  

HoldsToPullStartDate

Default: 2

Fragt: Setze das voreingestellte Startdatum für die Liste der Vormerkungen auf ___ Tage.

Beschreibung:

• The Holds to Pull report in circulation defaults to filtering holds placed 2 days ago. This preference allows you to set this default filter to any number of days.

itemBarcodeFallbackSearch

Voreinstellung: Nicht aktivieren

Fragt: ___ die automatische Stichwortsuche im Katalog, wenn der als Mediennummer eingegebene Begriff keinen Treffer mit einer Barcodesuche erzielt.

Werte:

• Nicht aktivieren

• Aktiviere

  

Beschreibung:

• Sometimes libraries want to checkout using something other than the barcode. Enabling this preference will do a keyword search of Koha to find the item you’re trying to check out. You can use the call number, barcode, part of the title or anything you’d enter in the keyword search when this preference is enabled and Koha will ask you which item you’re trying to check out.

  Wichtig

  While you’re not searching by barcode a barcode is required on every title you check out. Only titles with barcodes will appear in the search results.

itemBarcodeInputFilter

Default: Don’t filter

Fragt: ___ beim Einlesen von Exemplarbarcodes.

Werte:

• Convert from CueCat format

• Convert from Libsuite8 form

• Don’t filter

• EAN-13 or zero-padded UPC-A from

• Remove spaces from

• Remove the first number from T-prefix style

  • This format is common among those libraries migrating from Follett systems

NoticeCSS

Asks: Include the stylesheet at ___ on Notices.

Wichtig

Dies sollte eine vollständige URL sein, beginnend mit http://

Beschreibung:

• If you would like to style your notices with a consistent set of fonts and colors you can use this preference to point Koha to a stylesheet specifically for your notices.

numReturnedItemsToShow

Standard: 20

Fragt: Zeige die letzten ___ zurückgegebenen Exemplare auf der Rückgabeseite.

PatronAutoComplete

Fragt: ___ bei der Suche nach Benutzern in den Modulen Ausleihe und Benutzer. Gibt nur die ersten 10 Treffer zurück.

Default: Try

Werte:

• Try

• Don’t try

Beschreibung:

• This system preference enables the auto-complete feature in the patron search in the Patrons and Circulation modules.

• Setting it to „Try“ would enable a staff member to begin typing a name or other value into the field and have a menu pop up with suggestions for completing it. Setting it to „Don’t try“ would disable this feature.

• This preference can make staff members‘ jobs easier or it could potentially slow down the page loading process.

  

previousIssuesDefaultSortOrder

Fragt: Sortiere frühere Ausleihen auf der Ausleihseite nach ___ Fälligkeitsdatum.

Voreinstellung: von ältestem zu neuestem

Werte:

• von ältestem zu neuestem

• von neuestem zu ältestem

Beschreibung:

• This system preference controls how you want the previous checkouts to appear in the patron’s checkout tab.

• Wenn Sie „von ältestem zu neuestem“ auswählen, wird die älteste Ausleihe zuerst angezeigt.

• If you choose ‚latest to earliest‘, the most recent checkout will be at the top.

RecordLocalUseOnReturn

Default: Don’t record

Fragt: ___ die Rückgabe eines nicht entliehenen Exemplars als lokale Nutzung für die Statistik aus.

Werte:

• Don’t record

• Datensatz

Beschreibung:

• When this preference is set to „Don’t record“ you can record local use of items by checking items out to the statistical patron. With this preference set to „Record“ you can record local use by checking out to the statistical patron and/or by checking in a book that is not currently checked out.

ShowAllCheckins

Default: Do not show

Fragt: ___ alle Exemplare in der Liste der Rückgaben, auch solche die nicht ausgeliehen waren.

Werte:

• Do not show

• Zeige

Beschreibung:

• When items that are not currently checked out are checked in they don’t show on the list of checked in items. This preference allows you to choose how you’d like the log of checked in items displays.

SpecifyDueDate

Fragt: ___ dass Mitarbeiter ein spezifisches Fälligkeitsdatum für eine Ausleihe definieren.

Standardwert: Ja

Werte:

• Erlaube nicht

• Erlaube

Beschreibung:

• This preference allows for circulation staff to change a due date from the automatic due date, defined by circulation and fines rules, to another calendar date during checkout.

• This option would be used for circumstances in which the due date may need to be decreased or extended for any reason.

SpecifyReturnDate

Default: Don’t allow

Fragt: ___ den Bibliotheksmitarbeitern ein Rückgabedatum festzulegen.

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This preference lets you decide if staff can specify an arbitrary return date when checking in items. If an arbitrary return date is specified then fines are recalculated accordingly.

todaysIssuesDefaultSortOrder

Fragt: Sortiere die Tabelle der heutigen Ausleihen in der Ausleihe nach ___ Ausleihzeitpunkt.

Voreinstellung: von neuestem zu ältestem

Werte:

• von ältestem zu neuestem

• von neuestem zu ältestem

Beschreibung:

• This system preference controls how you want today’s checkouts to appear in the patron’s Checkout tab.

• Wenn Sie „von ältestem zu neuestem“ auswählen, wird die älteste Ausleihe zuerst angezeigt.

• If you choose ‚latest to earliest‘, the most recent checkout will be at the top.

UpdateTotalIssuesOnCirc

Default: Do not

Asks: ___ update a bibliographic record’s total issues count whenever an item is issued

Werte:

• Do

  Wichtig

  This increases server load significantly; if performance is a concern, use the cron job to update the total issues count instead.

• Do not

Beschreibung:

• Koha can track the number of times and item is checked out and store that on the item record in the database. This information is not stored by default. Setting this preference to ‚Do‘ will tell Koha to track that info every time the item is checked out in real time. Otherwise you could use the cron job to have Koha update that field nightly.

UseCirculationDesks

Fragt: ___ die Konfiguration von Ausleihtheken

Standardwert: Nicht benutzen

Werte:

• Verwende keine

• Verwenden Sie

Beschreibung:

• This preference enables the ability to manage various circulation desks within a single library.

WaitingNotifyAtCheckin

Default: Don’t notify

Fragt: ___ Hinweis in der Rückgabe, wenn für den zurückgebenden Benutzer Vormerkungen zur Abholung bereit liegen.

Werte:

• Don’t notify

• Notify

  

Beschreibung:

• When checking in books you can choose whether or not to have a notice pop up if the patron who returned the book has a hold waiting for pick up. If you choose ‚Notify‘ for WaitingNotifyAtCheckin then every time a hold is found for the patron who had the book out last a message will appear on your check in screen.

WaitingNotifyAtCheckout

Version

This system preference was introduced in Koha version 24.05.

Asks: ___ librarians of waiting holds for the patron whose items they are checking out.

Default: Don’t notify

Werte:

• Don’t notify

• Notify

Beschreibung:

• This system preference is used to enable a pop-up in the circulation module alerting staff that the patron they are checking out items to also has holds waiting for them.

  

Bemerkung

The pop-up currently appears after each checkout, even checkouts to the same patron.

Item bundles

BundleLostValue

Asks: Use the LOST authorized value ___ to represent ‚missing from bundle‘ at return.

Werte:

• Values are from the LOST authorized value category

Default: Missing from bundle

Beschreibung:

• This system preference is used when circulating item bundles to set the lost status of the item when it is missing from it’s bundle upon checkin.

• The default value for this preference is the ‚Missing from bundle‘ status in the default values for the LOST authorized value category. If you didn’t install the default values, make sure the system preference value refers to an actual lost status.

Achtung

Prior to Koha version 23.11, you have to enter a numerical value in this system preference, representing a lost status in the LOST authorized values category.

BundleNotLoanValue

Asks: Use the NOT_LOAN authorized value ___ to represent ‚added to bundle‘ when an item is attached to bundle.

Werte:

• Values are from the NOT_LOAN authorized value category

Default: Added to bundle

Beschreibung:

• This system preference is used when creating item bundles, to set the not for loan status of the item when it is added to a bundle so that the item itself cannot be circulated by itself, but only as part as the bundle.

• The default value for this preference is the ‚Added to bundle‘ status in the default values for the NOT_LOAN authorized values category. If you didn’t install the default values, make sure the system preference value refers to an actual not for loan status (the status should be positive so that patrons cannot place holds on the bundled item).

Achtung

Prior to Koha version 23.11, you have to enter a numerical value in this system preference, representing a not for loan status in the NOT_LOAN authorized values category.

Lost item policy

DefaultLongOverdueChargeValue

Asks: Charge a lost item to the borrower’s account when the LOST authorized value of the item changes to ___

Werte:

• Values are from the LOST authorized value category

Standardwert: Keine

Beschreibung:

• Leave this field empty if you don’t want to charge the user for lost items. If you want the user to be charged, enter the LOST authorized value you are using in the DefaultLongOverdueLostValue preference.

• This preference is used when the longoverdue cron job is called without the –charge parameter.

Achtung

Prior to Koha version 23.11, you have to enter a numerical value in this system preference, representing a lost status in the LOST authorized value category.

DefaultLongOverdueLostValue and DefaultLongOverdueDays

Asks: By default, set the LOST authorized value of an item to ___ when the item has been overdue for more than ___ days.

Values for DefaultLongOverdueLostValue:

• Values are from the LOST authorized value category

Standardwert: Keine

Beschreibung:

• These system preferences are used to enable the automatic overdue item loss process. Leave these fields empty if you don’t want to activate this feature.

• Setting the values to ‚Lost‘ and 30 for example will mark the item with the ‚Lost‘ status after the item is 30 days overdue.

• These system preferences are used when the longoverdue cron job is called without the --lost parameter.

• These system preferences allow users to set the values of the longoverdue cron without having to edit the crontab.

Achtung

Prior to Koha version 23.11, you have to enter a numerical value in DefaultLongOverdueLostValue, representing a lost status in the LOST authorized value category.

DefaultLongOverdueSkipLostStatuses

Asks: When using the automatic item loss process, skip items with LOST values matching any of ___ .

Werte:

• Values are from the LOST authorized value category

Standardwert: Keine

Beschreibung:

• This system preference works in conjunction with the DefaultLongOverdueLostValue and DefaultLongOverdueDays system preferences.

• When lost items are not marked as returned and if the library is using DefaultLongOverdueLostValue/DefaultLongOverdueDays or the long overdue cron job, they are still subject to the long overdue cron job. So an item that has already been marked as lost may automatically roll to ‚Long Overdue‘. A library may not want that lost value to change. This becomes especially important with the introduction of claims returned, which uses a variety of lost statuses.

• Leave this field empty if you don’t want to skip any lost statuses.

• Set to a list of comma separated values from the LOST authorized value category, e.g. 5,6,7.

IssueLostItem

Fragt: Wenn ein Exemplar ausgeliehen wird, das als verloren markiert wurde, ___.

Werte:

• display a message

• require confirmation

• do nothing

Default: display a message

Beschreibung:

• This system preference is used to define if and how staff members are notified that an item with a lost status is being checked out. If they are notified, they can change the status if necessary.

• If the system preference is set to ‚display a message‘, the item will be checked out, but there will be a message displayed reading ‚This item has been lost with a status of „X“.‘

  

• If the system preference is set to ‚require confirmation‘, the item will not be checked out and the staff member will have to click either ‚Yes, check out‘, or „No, don’t check out“ to confirm.

  

• If the system preference is set to ‚do nothing‘, the item will be checked out as normal without any notification to the status.

MarkLostItemsAsReturned

Asks: Mark items as returned when flagged as lost ___

Werte:

• [Select All]

• from the ‚Holds to pull‘ list

• from the batch item modification tool

• from the items tab of the catalog module

• from the longoverdue cronjob

• when cataloging an item

• when marking an item as a return claim

• when receiving a payment for the item

Default:

By default, the following options are selected

• from the ‚Holds to pull‘ list

• from the batch item modification tool

• from the items tab of the catalog module

• from the longoverdue cronjob

• when cataloging an item

• when receiving a payment for the item

Beschreibung:

• This system preference allows the library to choose which of these actions trigger the return of an item from the patron’s account when the item is marked as lost.

• If no option is selected, the lost item will stay checked out in the patron’s account.

UpdateItemLostStatusWhenPaid

Version

Dieser Parameter wurde mit der Koha-Version 24.05 eingeführt.

Asks: Update item status to ___ when the outstanding balance is paid.

Werte:

• Values are from the LOST authorized value category

Standardwert: Keine

Beschreibung:

• This system preference can be used to automatically change the lost status of a lost item when the patron pays for the item.

• For example, if the system preference has the value ‚Lost and paid for‘, when a patron pays the replacement cost of the lost item, the item’s lost status will change to ‚Lost and paid for‘.

UpdateItemLostStatusWhenWriteoff

Version

Dieser Parameter wurde mit der Koha-Version 24.05 eingeführt.

Asks: Update item status to ___ when the outstanding balance is written off.

Werte:

• Values are from the LOST authorized value category

Standardwert: Keine

Beschreibung:

• This system preference can be used to automatically change the lost status of a lost item if the patron’s charge is written off.

• For example, if the system preference has the value ‚Lost and paid for‘, when staff writes off the replacement cost of the lost item from a patron’s account, the item’s lost status will change to ‚Lost and paid for‘.

Patron restrictions

AutoRemoveOverduesRestrictions

Asks: When returning items ___ remove OVERDUES restriction triggered by sent notices.

Default: don’t

Werte:

Version

Prior to version 23.11 of Koha, the options for this system preference were ‚do‘ or ‚do not‘. As of version 23.11, options were expanded to check for other checkouts in the patron’s account before lifting the restriction.

• versuche nicht

• if patron has no remaining overdue items

• if patron has no remaining items that is cause for debarment

Beschreibung:

• Using the Overdue Notice/Status Triggers you can restrict patrons after they receive an overdue notice. This preference lets you define whether Koha will automatically remove that restriction once the overdue items in question are returned or not.

• The difference between removing restriction when no remaining overdue items exists and doing so only when any of the items would result in debarment is that the latter option will respect possible grace periods of overdue rules also on returns and not only when generating overdue notices.

CumulativeRestrictionPeriods

Asks: ___ the restriction periods.

Default: Don’t cumulate

Werte:

• Don’t cumulate

• Cumulate

Beschreibung:

• This system preference controls whether or not restriction periods should be served concurrently or consecutively.

• If set to „Don’t cumulate“, the patron will be restricted only for the longest period. (For example, if a patron has a restriction of 10 days and another restriction of 15 days, they will be restricted for 15 days.)

• If set to „Cumulate“, the patron will be restricted for the sum of all the restriction period. (For example, if a patron has a restriction of 10 days and another restriction of 15 days, they will be restricted for 25 days.)

PatronRestrictionTypes

Asks: ___ the type of patron restriction to be specified when applying manually.

Default: Don’t allow

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• This preference allows staff the ability to pick a restriction type when adding a manual restriction to a patron.

RestrictionBlockRenewing

Standardwert: Ja

Asks: If patron is restricted, ___ renewing of items from the staff interface and via the misc/cronjobs/automatic_renewals.pl cronjob.

Werte:

• Erlaube

• Sperren

Beschreibung:

• This preference affects all forms of renewals made from the staff interface and the automatic renewals cron job.

Recalls

The recalls feature allows users to recall items that are currently checked out.

RecallsMaxPickUpDelay

Asks: Mark a recall as problematic if it has been waiting to be picked up for ___ days.

Default: 7

Beschreibung:

• This system preference defines the number of days a user has to come pick up their recalled item.

• The recalls that have been awaiting pickup for more than this number of days will be highlighted in the circulation module.

• This preference is applied if there is no defined waiting period in the circulation rules.

UseRecalls

Asks: ___ recalls.

Standardwert: Nicht benutzen

Werte:

• Verwende keine

• Verwenden Sie

Beschreibung:

• This is the main switch for the recalls feature.

• Make sure you configure circulation and fines rules for recalls once enabled.

Rückgabereklamationen

These system preferences are used by the return claims feature, where staff can mark checkouts as ‚claimed returned‘ when a patron says they returned an item, and track those claims.

AutoClaimReturnStatusOnCheckin

Version

Dieser Parameter wurde mit der Koha-Version 24.05 eingeführt.

Asks: Automatically resolve the claim and change the resolution to the RETURN_CLAIM_RESOLUTION authorized value ___ upon check in.

Werte:

• Values are from the RETURN_CLAIM_RESOLUTION authorized value category

Standardwert: Keine

Beschreibung:

• This system preference is used to automatically resolve return claims when the item is checked in.

• If the system preference is empty, the feature is disabled and return claims must be resolved manually.

AutoClaimReturnStatusOnCheckout

Version

Dieser Parameter wurde mit der Koha-Version 24.05 eingeführt.

Asks: Automatically resolve the claim and change the resolution to the RETURN_CLAIM_RESOLUTION authorized value ___ upon check out.

Werte:

• Values are from the RETURN_CLAIM_RESOLUTION authorized value category

Standardwert: Keine

Beschreibung:

• This system preference is used to automatically resolve return claims when the item is checked out.

• If the system preference is empty, the feature is disabled and return claims must be resolved manually.

ClaimReturnedChargeFee

Asks: When marking a checkout as „claims returned”,

Werte:

• Ask if a lost fee should be charged (default)

• Charge a lost fee

• Don’t charge a lost fee

Beschreibung:

• This preference allows a library to choose if a lost fee is charged at the time an item being claimed is returned. If set to ask, there is a checkbox to either charge or don’t charge per transaction. If set to charge, Koha will charge the patron the replacement price of the item. If set to don’t charge, Koha will not charge the patron.

ClaimReturnedLostValue

Asks: Use the LOST authorized value ___ to represent returns claims.

Werte:

• Values are from the LOST authorized value category

Standardwert: Keine

Beschreibung:

• This system preference enables the return claims feature

• This will be the status assigned to items that have been claimed as returned.

Achtung

Prior to Koha version 23.11, you have to enter a numerical value in this system preference, representing a lost status in the LOST authorized values category.

ClaimReturnedWarningThreshold

Warne das Bibliothekspersonal, wenn für einen Benutzer mehr als ___ Rückgabebehauptungen vorliegen.

Beschreibung:

• Enter a number if a library would like to set a limit to the number of returns claims that the patron can have before showing a warning on the patron’s screen.

CleanUpDatabaseReturnClaims

Asks: Remove resolved return claims older than ___ days.

Default: (empty)

Beschreibung:

• This system preference is used to delete resolved return claims.

• This system preference requires the cleanup_database.pl cron job with the --return-claims parameter.

SIP2

SIP2AddOpacMessagesToScreenMessage

Version

This system preference was added to Koha in version 23.11.

Asks: ___ OPAC patron messages in the SIP2 screen message field.

Default: Send

Werte:

• Nicht verschicken

• Schicke

Beschreibung:

• This system preference determines whether or not the OPAC messages are displayed on the screen when using SIP2.

• OPAC messages will be preceded by „Messages for you: „.

SIP2SortBinMapping

Asks: Use the following mappings to determine the sort_bin of a returned item.

Beschreibung:

• This system preference is used to set the ‚sort bin‘ or CL response for SIP equipment when checking in an item. The mappings entered here will determine which bin the SIP sorter sends an item to.

• This system preference must be filled with a specific syntax.

  • Each mapping should be on its own line.

  • Each mapping should be of the form

    branchcode:item field:comparator:item field value:sort bin number
    

    where

    • ‚branchcode‘ is the library where the checkin is being performed (i.e. library assigned to the SIP user)

    • ‚item field‘ is a database column in the items table

    • ‚comparator‘ is the type of comparison, possible values are:

    • eq (is equal to)

    • < (is less than)

    • <= (is less than or equal to)

    • > (is greater than)

    • >= (is greater than or equal to)

    • ne (is not equal to)

    • ‚item field value‘ is the value to compare against the value in the specified ‚item field‘

      Bemerkung

      Specifying ‚item field value‘ with a leading $ and an item field name will use the value of that field in the item for comparison.

      For example, $holdingbranch will compare the item field to the item’s homebranch.

    • ‚sort bin number‘ is the expected return value in the CL field of the SIP response for an item matching the rule.

Tipp

The mappings will be taken into account in the order the lines are written, starting with the top one. Think carefully about the logic your mappings should follow and which order to write them in to achieve what you want.

Mapping examples

CPL:itype:eq:BOOK:1

This will return sort bin 1 for an item of itemtype code ‚BOOK‘ returned to the library with branchcode ‚CPL‘.

CPL:itemcallnumber:<:339.6:3

This will return sort bin 3 for an item with a callnumber less than 339.6 returned to the ‚CPL‘ library.

CPL:homebranch:ne:\$holdingbranch:X

This will return sort bin ‚X‘ for an item returned to CPL where the holdingbranch is not equal to the homebranch (i.e. any item belonging to a different library than ‚CPL‘).

Version

Before Koha version 23.11, each line can only have one ‚item field‘ mapping. From 23.11, each line can use multiple item fields mappings.

Having multiple item fields mappings allows for more refined sorting rules. For example, instead of only sorting by item type, a library may now sort by item type and collection code and not for loan status.

There is no limit on the number of item field mappings that can be used in one line.

CPL:itype:eq:BOOK:ccode:eq:TEEN:5

This will return sort bin 5 for an item with the itemtype code ‚BOOK‘ and the collection code ‚TEEN‘ returned to the library with branchcode ‚CPL‘.

Use case

Centerville Library (branchcode ‚CPL‘) has SIP equipment which sorts returned items into 4 bins.

• Bin number 1 is for CPL items to be shelved on floor 1 (items whose location code is ‚FLOOR1‘).

• Bin 2 is for CPL items to be shelved on floor 2 (items whose location code is ‚FLOOR2‘).

• Bin 3 is for CPL items that require specific attention, e.g. they need to be checked before shelving or they are part of a specific collection. The CPL stock team is currently recalling the floor 1 Parent collection using this bin.

• Bin 4 is solely for items that need to be transferred to other libraries (items whose homebranch is not CPL).

Here is the content of their SIP2SortBinMapping system preference.

# Items to be transferred go to bin 4

CPL:homebranch:ne:$holdingbranch:4

# CPL toys, special stock and Floor 1 parent collection go to bin 3

CPL:itype:eq:TOY:3

CPL:notforloan:>=:1:3

CPL:location:eq:FLOOR1:ccode:eq:PARENT:3

# Other floor 1 CPL stock to bin 1

CPL:location:eq:FLOOR1:1

# Floor 2 CPL stock to bin 2

CPL:location:eq:FLOOR2:2

Note that the mapping for bin 4 is at the top. This ensures that items to be transferred to other libraries are dealt with first; the next mappings will therefore only concern CPL items.

Comments are added to the preference by inserting a hash sign at the beginning of the comment line.

UseLocationAsAQInSIP

Asks: Use ___ for AQ field in SIP protocol.

Default: homebranch

Werte:

• homebranch

• permanent_location

Beschreibung:

• This system preference allows you to decide which item information is used as the AQ response for SIP equipment.

• AQ is used in automated sorting bins, for example, as the item’s ‚permanent location‘. For some libraries, that might mean the item’s home library, whereas for others it might mean the item’s permanent location.

Self check-in module (sci-main.pl)

SelfCheckInMainUserBlock

Achtung

Dieser Parameter existiert nicht mehr ab Version 23.11. Er befindet sich jetzt unter HTML-Anpassungen.

Asks: Include the following HTML on the self check-in screen

Beschreibung:

• HTML entered in this field will appear in the center of the main page of your self checkin screen

SelfCheckInModule

Voreinstellung: Nicht aktivieren

___ das selbständige Selbstverbuchungs-Modul (unter der Adresse: /cgi-bin/koha/sci/sci-main.pl)

Werte:

• Nicht aktivieren

• Aktiviere

Beschreibung:

• This system preference will activate (or deactivate) the self check- in module

SelfCheckInTimeout

Default: 120

Selbstverbuchungs-Bildschirm zurücksetzen nach ___ Sekunden.

Beschreibung:

• Enter the number of seconds after which you want the self check-in screen to refresh and go back to the main page (for example, if a patron forgot to log out).

SelfCheckInUserCSS

Asks: Include the following CSS on all the self check-in screens

Beschreibung:

• The CSS code entered here will override any CSS on the self check-in screens

SelfCheckInUserJS

Asks: Include the following JavaScript on all the self check-in screens

Beschreibung:

• The JavaScript entered here will override any other JavaScript on the self check-in screens

Self check-out module (sco-main.pl)

AutoSelfCheckAllowed, AutoSelfCheckID and AutoSelfCheckPass

Wichtig

Most libraries will want to leave this set to ‚Don’t allow‘. This preference turns off the requirement to log into the self checkout machine with a staff username and password by storing the username and password for automatic login.

Asks: ___ the web-based self checkout system to automatically login with this staff login ___ and this password ___.

AutoSelfCheckAllowed default: Don’t allow

AutoSelfCheckAllowed values:

• Erlaube

• Erlaube nicht

AutoSelfCheckID value:

• The username of a staff patron with the self_checkout_module permission.

AutoSelfCheckPass value:

• The password of a staff patron with the self_checkout_module permission.

Warnung

Benutzer, deren Anmeldedaten hier eingegeben werden, müssen für diesen Zweck angelegte Benutzer sein. Sie können sich nicht am OPAC anmelden.

SCOAllowCheckin

Fragt: ___ die Rückgabefunktion für Benutzer in der webbasierten Selbstausleihe.

Default: Don’t allow

Werte:

• Erlaube

• Erlaube nicht

Beschreibung:

• Mit diesem Parameter legen Sie fest, ob Sie Ihren Benutzern die Rückgabe von Medien an Ihren Selbstverbuchungsstationen gestatten wollen. Standardmäßig dient die Koha-Selbstausleihschnittstelle nur zur Ausleihe von Medien.

SCOBatchCheckoutsValidCategories

Version

Dieser Parameter wurde mit der Koha-Version 24.05 eingeführt.

Asks: Patron categories allowed to check out in a batch while logged into the self checkout system: ___

Werte:

• Values are the patron categories; multiple categories can be selected.

Standardwert: Keine

Beschreibung:

• This system preference is used to determine which patron categories are allowed to use batch checkout in the self checkout system.

• If this system preference is empty, no one can batch checkout through the self checkout system. Checkouts must be done one at a time.

Bemerkung

The BatchCheckouts and WebBasedSelfCheck system preferences must be enabled for this system preference to have any effect.

Siehe auch:

• WebBasedSelfCheck

• BatchCheckouts

• BatchCheckoutsValidCategories

SCOLoadCheckoutsByDefault

Version

This system preference was added to Koha in version 23.11.

Asks: ___ the patron’s list of current checkouts by default when they log in to the self checkout module.

Standardwert: Ja

Werte:

• Zeige nicht

• Zeige

Beschreibung:

• Dieser Parameter legt fest, ob die aktuellen Ausleihen des Benutzenden standardmäßig angezeigt werden, wenn er sich beim Selbstverbuchungsmodul anmeldet.

• In Bibliotheken, in denen sich der Selbstverbucher an einem gut sichtbaren Ort befindet, wird die Privatsphäre der Kunden dadurch geschützt, dass die aktuellen Ausleihvorgänge standardmäßig ausgeblendet werden.

• Über einen Klick auf die Schaltfläche „Laden Sie Ihre Ausleihen“ können sich Benutzer ihre aktuellen Ausleihen anzeigen lassen.

SCOMainUserBlock

Achtung

Dieser Parameter existiert nicht mehr ab Version 23.11. Er befindet sich jetzt unter HTML-Anpassungen.

Asks: Include the following HTML on the web-based self checkout screen:

Beschreibung:

• In diesem Parameter eingetragener HTML-Code wird auf der Hauptseite der Selbstausleihe verwendet.

SCOUserCSS

Asks: Include the following CSS on all pages in the web-based self checkout:

Beschreibung:

• In diesen Parameter eingetragenes CSS wird auf allen Koha-Selbstverbuchungsseiten verwendet.

SCOUserJS

Asks: Include the following JavaScript on all pages in the web-based self checkout:

Beschreibung:

• In diesen Parameter eingetragener JavaScript-Code wirkt sich auf alle Ihre Koha-Selbstverbuchungsseiten aus.

SelfCheckAllowByIPRanges

Fragt: Erlaube den Zugriff auf die Selbstausleihe von den folgenden IP-Adressen: ___

Beschreibung:

• Dieser Parameter wird verwendet, um den Zugriff auf das Selbstausleihmodul nach IP-Bereichen zu begrenzen.

• Verwenden Sie IP-Bereiche oder einzelne IP-Adressen getrennt mit Leerzeichen, z.B. ‚192.168.1.1 192.168.0.0/24‘

• Wenn Sie den Zugriff nicht nach IP-Bereich begrenzen möchten, lassen Sie diesen Parameter frei.

SelfCheckHelpMessage

Achtung

Dieser Parameter existiert nicht mehr ab Version 23.11. Er befindet sich jetzt unter HTML-Anpassungen.

Asks: Include the following HTML in the Help page of the web-based self checkout system:

Beschreibung:

• Wenn Sie auf den Link „Hilfe“ oben rechts auf der Selbstausleihsystemseite klicken, wird ein dreistufiger Prozess zur Nutzung des Selbstausleihmoduls angezeigt. Durch Hinzufügen von HTML zu diesem Parameter wird der zusätzliche Hilfetext über dem bereits vorhandenen angezeigt.

SelfCheckoutByLogin

Asks: Have patrons login into the web-based self checkout system with their ___.

Default: Username and password

Werte:

• cardnumber

• username and password

Beschreibung:

• This preference lets you decide how your patrons will log in to the self checkout module. Either the patron’s card number (barcode) or their username and password (the OPAC/Staff interface login username and password fields in the patron record).

Warnung

If using ‚cardnumber‘ and AutoSelfCheckAllowed, you should set SelfCheckAllowByIPRanges to prevent brute force attacks to gain patron information outside the library.

SelfCheckReceiptPrompt

Fragt: ___ den Quittungsdruck-Dialog nach Abschluss einer Selbstausleihe.

Standardwert: Ja

Werte:

• Zeige nicht

• Zeige

Beschreibung:

• Dieser Parameter steuert, ob bei der webbasierten Selbstausleihe ein Quittungsdruck-Dialog angezeigt wird, wenn der Kunde auf die Schaltfläche „Fertig stellen“ klickt.

SelfCheckTimeout

Setze den Timeout des Selbstausleihsystems auf ___ Sekunden.

Default: 120

Beschreibung:

• Wenn die Station für die in diesem Parameter definierte Zeit inaktiv ist, meldet das Selbstausleihsystem den aktuellen Benutzer ab und kehrt zum Startbildschirm zurück.

ShowPatronImageInWebBasedSelfCheck

___ Benutzerfoto (wenn eines hinzugefügt wurde) im web-basierten Selbstverbuchungssystem.

Default: Don’t show

Werte:

• Zeige nicht

• Zeige

Beschreibung:

• Wenn dieser Parameter auf „Zeigen“ gesetzt ist, sieht der Benutzer sein eigenes Bild, wenn er sich beim webbasierten Selbstverbuchungsmodul anmeldet.

WebBasedSelfCheck

Fragt: ___ die webbasierte Selbstausleihe.

Voreinstellung: Nicht aktivieren

Werte:

• Nicht aktivieren

• Aktiviere

Beschreibung:

• Die Aktivierung dieses Parameters ermöglicht den Zugriff auf das self check-out-Modul in Koha.

• Your self check-out module is available at: https://YOUR.OPAC.URL/cgi-bin/koha/sco/sco-main.pl

Stock rotation module

StockRotation

Fragt: ___ das Modul für Bestandsrotation.

Voreinstellung: Deaktiviere

Werte:

• Deaktiviere

• Aktiviere

Beschreibung:

• Bei der Einstellung ‚Aktiviere‘ erscheint unter Katalogisierung > Automatisierung das stock rotation module.