Cron jobs and daemons

Koha is supported by a number of background tasks. These tasks can either be periodically executed tasks (cron jobs) or continuously running tasks called daemons.

A cron job is a Linux command for scheduling a command or script on your server to complete repetitive tasks automatically. Scripts executed as a cron job are typically used to modify files or databases; however, they can perform other tasks that do not modify data on the server, like sending out email notifications.

A daemon is a Linux command that is typically started when the system is booted and runs in the background doing some function. The database used by Koha (either MySQL or MariaDB) is a daemon as is the web server (typically Apache).

Koha has many cron jobs in place that you can enable (search engine indexing, overdue notice generation, data cleanup and more), and a few daemons. This chapter will explain those for you.

Crontab example

An example of a Koha crontab can be found in misc/cronjobs/crontab.example

The example includes sample boilerplate cron job entries for the most commonly-used cron jobs.

Cron jobs

The locations below assume a development install which puts the crons in misc/, if you have a standard install you may want to look in bin/ for these files if you cannot find them in misc/

Backup

Daily backup

Script path: misc/cronjobs/backup.sh

Does: creates a daily backup of the Koha database.

Frecuencia sugerida: diaria

Circulación

Holds queue

Script path: misc/cronjobs/holds/build_holds_queue.pl

Does: updates holds queue report

Required by: Holds queue report

Frecuencia sugerida: cada 1-4 horas

Descripción:

  • Un script que se debe ejecutar periódicamente si su sistema de bibliotecas permite a los usuarios hacer reservas. Este script decide qué biblioteca debe ser responsable del cumplimiento de una solicitud de reserva dada.

    It’s behavior is controlled by the system preferences StaticHoldsQueueWeight and RandomizeHoldsQueueWeight.

    If you do not want all of your libraries to participate in the on-shelf holds fulfillment process, you should list the the libraries that *do* participate in the process here by inputting all the participating library’s branchcodes, separated by commas ( e.g. «MPL,CPL,SPL,BML» etc. ).

    By default, the holds queue will be generated such that the system will first attempt to hold fulfillment using items already at the pickup library if possible. If there are no items available at the pickup library to fill a hold, build_holds_queue.pl will then use the list of libraries defined in StaticHoldsQueueWeight. If RandomizeHoldsQueueWeight is disabled ( which it is by default ), the script will assign fulfillment requests in the order the branches are placed in the StaticHoldsQueueWeight system preference.

    Por ejemplo, si su sistema cuenta con tres bibliotecas, de diferentes tamaños ( pequeño, mediano y grande ) y quiere que la carga de cumplimiento esté en las bibliotecas más grandes más que en las bibliotecas más pequeñas, usted querría que StaticHoldsQueueWeight fuese algo así «LRG,MED,SML».

    Si quiere que la carga de cumplimiento se extienda por igual por todas las bibliotecas del sistema, sólo tiene que activar RandomizeHoldsQueueWeight. Cuando esta preferencia del sistema está activada, el orden en el que las bibliotecas se les pedirá que satisfagan una reserva se asignará aleatoriamente cada vez que se vuelve a generar la lista.

    Leaving StaticHoldsQueueWeight empty is contraindicated at this time. Doing so will cause the build_holds_queue script to ignore RandomizeHoldsQueueWeight, causing the script to request hold fulfillment not randomly, but by alphabetical order.

Expired holds

Script path: misc/cronjobs/holds/cancel_expired_holds.pl

Does: cancels holds where the user has set an expiration date. If the library is using the ExpireReservesMaxPickUpDelay and ExpireReservesMaxPickUpDelayCharge preferences then this script will also cancel holds that have been sitting on the hold shelf for too long and will (if the library does) charge the patron for not picking up the hold.

It is possible to add a cancellation reason with the –reason parameter. Use the cancellation code from the HOLD_CANCELLATION authorized value category

Frecuencia sugerida: diaria

Unsuspend holds

Script path: misc/cronjobs/holds/auto_unsuspend_holds.pl

Does: checks to find holds that should no longer be suspended and removes the suspension if the AutoResumeSuspendedHolds preference is set to “allow”. This puts the patron back in to the queue where they were when the hold was suspended.

Frecuencia sugerida: diaria

Multas

Ruta del script: misc/cronjobs/fines.pl

Does: calculates and charges (or increments) overdue fines per item to patron accounts. The fine calculation is done using the grace period, fine interval, fine amount and other parameters from the circulation and fines rules.

Required by: finesMode system preference

Frecuencia sugerida: todas las noches

Note If the Koha system preference “finesMode” is set to “production”, the fines are charged to the patron accounts. If set to “test”, the fines are calculated but not applied.

Note Fines will not be applied on a holiday.

PARAMETERS - -h|–help

  • get help message

  • -l|–log

    • log the output to a file (optional if the -o parameter is given)

  • -o|–out

    • output directory for logs (defaults to env or /tmp if the directory does not exist)

  • -v|–verbose

    • verbose mode

  • -m|–maxdays

    • how many days back of overdues to process

    • this can improve performance by simply the number of records that need to be processed. It can be safe to limit the overdues processed to those under X days overdues given that circulation policy often caps fines at a maximum after a number of days.

Static fines

Script path: misc/cronjobs/staticfines.pl

Does: charges a single static fine for any/all overdues a patron currently has outstanding. The charge amount is either defined on the command line per borrower category or will use the circulation rules associated with the oldest overdue item the patron has currently checked out (for the first fine period only) Once charged, the fine is static: No new fines will be added until the existing fine is paid off in full.

Frecuencia sugerida: todas las noches

Note If the Koha system preference “finesMode” is set to “production”, the fines are charged to the patron accounts. If set to “test”, the fines are calculated but not applied.

Note Fines won’t be applied on a holiday.

Long overdues

Ruta del script: misc/cronjobs/longoverdue.pl

Qué hace: permite especificar los retrasos para que los ítems cambien a estado de perdidos, y opcionalmente cobrar el precio de sustitución en el registro del ítem.

Frecuencia sugerida: todas las noches

Nota

Staff can control some of the parameters for the longoverdue cron job with the DefaultLongOverdueLostValue and DefaultLongOverdueChargeValue preferences.

Track total checkouts

Script path: misc/cronjobs/update_totalissues.pl

Does: updates the biblioitems.totalissues field in the database with the latest tally of checkouts based on historical issue statistics.

Frecuencia sugerida: todas las noches

Warning

Si la hora en su servidor de base de datos no coincide con la hora en el servidor Koha tendrá que tener esto en cuenta, y probablemente utilizar el argumento –since en vez de el argumento –interval para la actualización incremental.

Nota

This cronjob can be used if there is a performance concern. Otherwise, use the UpdateTotalIssuesOnCirc System Preference.

Generate patron file for offline circulation

Script path: misc/cronjobs/create_koc_db.pl

Does: generates the borrowers.db file for use with the Koha offline circulation tool

Frecuencia sugerida: semanal

Renovación automática

Script path: misc/cronjobs/automatic_renewals.pl

Does: renews items if you’re allowing automatic renewal with your circulation and fines rules.

Frecuencia sugerida: todas las noches

Importante

To run this properly, you must use the –confirm parameter, otherwise it will only run in test mode

PARAMETERS - -h|–help

  • get help message

  • –send-notices

    • sends the AUTO_RENEWALS notice to patrons if the automatic renewal has been done

  • -v|–verbose

    • verbose mode

  • -c|–confirm

    • without this parameter no changes will be made, the script will run in test mode

    • without this parameter, the script will default to verbose mode as well

Automatic checkin

Script path: misc/cronjobs/automatic_checkin.pl

Does: automatically checks in items after the loan period. This is set at the item type level.

Frecuencia sugerida: todas las noches

Recalls

Expire recalls

Script path: misc/cronjobs/recalls/expire_recalls.pl

Does: automatically marks as expired recalls that

  • have been requested, but have not been fulfilled and are past their expiry date

  • recalls that have been awaiting pickup longer than the pickup period in the circulation rules or the period set in the RecallsMaxPickUpDelay system preference

Frecuencia sugerida: todas las noches

Overdue recalls

Script path: misc/cronjobs/recalls/overdue_recalls.pl

Does: sets a recalled item as overdue if it hasn’t been returned by the adjusted due date

Frecuencia sugerida: todas las noches

Usuarios

Batch delete patrons

Script path: misc/cronjobs/delete_patrons.pl

Does: deletes patron records in batch based on date not borrowed since, expired before, last seen, category code, or library branch.

Nota

Dates should be in ISO format, e.g., 2013-07-19, and can be generated with date -d “-3 month” «+%Y-%m-%d».

Importante

The options to select the patron records to delete are cumulative. For example, supplying both –expired_before and –library specifies that patron records must meet both conditions to be selected for deletion.

PARAMETERS

  • –not_borrowed_since Delete patrons who have not borrowed since this date.

  • –expired_before Delete patrons with an account expired before this date.

  • –last_seen Delete patrons who have not been connected since this date. The system preference TrackLastPatronActivity must be enabled to use this option.

  • –category_code Delete patrons who have this category code.

  • –library Delete patrons in this library.

  • -c|–confirm This flag must be provided in order for the script to actually delete patron records. If it is not supplied, the script will only report on the patron records it would have deleted.

  • -v|–verbose Verbose mode.

Anonymize patron data

Script path: misc/cronjobs/batch_anonymise.pl

Does: removes borrowernumbers from circulation history so that the stats are kept, but the patron information is removed for privacy reasons.

Update patron categories

Script path: misc/cronjobs/update_patrons_category.pl

Does: Updates the patron category of patrons matching the given criteria to another specified patron category. This can be used to convert child patrons from a child patron category to an adult patron category when they reach the upper age limit defined in the patron category.

This script replaces the j2a.pl script.

Frecuencia sugerida: todas las noches

DESCRIPTION

This script is designed to update patrons from one category to another using the criteria specified using command line arguments.

PARAMETERS

  • –too_old Update, if patron is over the upper age limit of their current patron category.

  • –too_young Update, if patron is below the minimum age limit of their patron category.

  • –fo=X|–fineover=X Update, if the total fine amount on the patron account is over X.

  • –fu=X|–fineunder=X Update, if the total fine amount on the patron account is below X.

  • –rb=date|regbefore=date Update, if the registration date of the patron is before the given date.

  • –ra=date|regafter=date Update, if the registration date of the patron is after the given date.

  • -d –field name=value Update, if the given condition is met. <name> has to be replaced by a column name of the borrowers table. The condition is met, if the the content of the field equals <value>.

  • –where <conditions> Update, if the SQL <where> clause is met.

  • -v|–verbose Verbose mode: Without this flag only fatal errors are reported.

  • -c|–confirm Commits the changes to the database. No changes will be made unless this argument is added to the command.

  • -b|–branch <branchcode> Update, if the home branch of the patron matches the <branchcode> given.

  • -f|–form <categorycode> Update, if the patron currently has this patron category.

  • -t|–to <categorycode> Update the patrons matching the criteria to this patron category.

USAGE EXAMPLES

«update_patrons_category.pl»

«update_patrons_category.pl» -b=<branchcode> -f=<categorycode> -t=<categorycode> -c» (Processes a single branch, and updates the patron categories from category to category)

«update_patrons_category.pl» -f=<categorycode> -t=<categorycode> -v» (Processes all branches, shows all messages, and reports the patrons who would be affected. Takes no action on the database)

Update patrons” messaging preferences

Script path: misc/maintenance/borrowers-force-messaging-defaults.pl

Does: updates patrons” messaging preferences to the default values set in the patron categories.

Messaging preferences defaults are automatically set when adding a new patron or when importing patrons with the patron import tool. However, if you import patrons directly in the database, these messaging preferences will not be set.

There is no suggested frequency. This is a tool to be used when needed, although if you regularly import patrons directly in the database (through a third-party, for example), you can add it to your crontab.

DESCRIPTION

If the EnhancedMessagingPreferences system preference is enabled after borrowers have been created in the DB, those borrowers won’t have messaging transport preferences default values as defined for their borrower category. So you would have to modify each borrower one by one if you would like to send them “Hold Filled” notice for example.

This script creates/overwrites messaging preferences for all borrowers and sets them to default values defined for the category they belong to (unless you use the options -not-expired or -no-overwrite to update a subset).

PARAMETERS

  • –doit

    Update the patrons. The script will not update patrons” messaging preferences without this option. It will only list the patrons who would have been updated.

  • –not-expired

    Only update patrons who are still active (whose files are not yet expired).

  • –no-overwrite

    Only update patrons without any messaging preferences. This option will skip patrons who have already set their preferences.

  • –category

    Only update patrons from the specified category.

    Advertencia

    This option cannot be repeated.

    For example:

    borrowers-force-messaging-defaults.pl --doit --category PT --category B

    will only update patrons from category B (the last category specified).

  • –since

    Only update patrons enrolled since the specified date.

    Nota

    This option can use specific or relative dates.

    For example:

    borrowers-force-messaging-defaults.pl --doit --since "2022-07-12"

    will only update patrons enrolled since July 12, 2022.

    And:

    borrowers-force-messaging-defaults.pl --doit --since `date -d "1 day ago" '+%Y-%m-%d'

    will only update patrons enrolled since yesterday.

USAGE EXAMPLES

borrowers-force-messaging-defaults.pl --doit

Updates all patrons to give them the default messaging preferences values from their respective category.

borrowers-force-messaging-defaults.pl --doit --not-expired

Updates all patrons whose memberships are not expired to give them the default messaging preferences values from their respective category.

borrowers-force-messaging-defaults.pl --doit --category PT

Updates all patrons in the PT category to give them the default messaging preferences for that category.

borrowers-force-messaging-defaults.pl --doit --no-overwrite --since "2022-03-01"

Updates patrons who do not have any messaging preferences set and who are enrolled since March 1st, 2022.

Avisos

Message queue

Script path: misc/cronjobs/process_message_queue.pl

Does: processes the message queue to send the check out, check in and hold filled emails and SMS message to users and sends outgoing emails to patrons. requires EnhancedMessagingPreferences to be on

Frecuencia sugerida: 1-4 horas

Importante

Item due and Advanced due notices are controlled by the advance_notices cron.

Advanced notice

Script path: misc/cronjobs/advance_notices.pl

Does: prepares «pre-due» notices and «item due» notices for patrons who request them prepares notices for patrons for items just due or coming due soon. requires EnhancedMessagingPreferences to be on

Frecuencia sugerida: todas las noches

Nota

This script does not actually send the notices. It queues them in the message queue for later

Overdue notice

Script path: misc/cronjobs/overdue_notices.pl

Qué hace: prepara los mensajes para alertar a los usuarios de mensajes de retrasos (ambas vías correo electrónico e impresión)

Frecuencia sugerida: todas las noches

Nota

This script does not actually send the notices. It queues them in the message queue for later or generates the HTML for later printing

See also

The misc/cronjobs/advance_notices.pl program allows you to send messages to patrons in advance of their items becoming due, or to alert them of items that have just become due.

Talking Tech

To learn more about setting up this third party product view the Talking Tech chapter.

Sending notices file

Script path: misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl

Does: generates Spec C outbound notifications file for Talking Tech i-tiva phone notification system.

Required by: TalkingTechItivaPhoneNotification

Frecuencia sugerida: todas las noches

Receiving notices file

Script path: misc/cronjobs/thirdparty/TalkingTech_itiva_inbound.pl

Does: processes received results files for Talking Tech i-tiva phone notification system.

Required by: TalkingTechItivaPhoneNotification

Frecuencia sugerida: todas las noches

Notify patrons of expiration

Script path: misc/cronjobs/membership_expiry.pl

Does: sends messages to warn patrons of their card expiration to the message queue cron.

Requires: MembershipExpiryDaysNotice

Frecuencia: mensual

In processing/book cart

Script path: misc/cronjobs/cart_to_shelf.pl

Does: updates all items with a location of CART to the item’s permanent location.

Required by: NewItemsDefaultLocation, and UpdateItemLocationOnCheckin system preferences

Frecuencia sugerida: cada hora

Catálogo

Import webservice batch

Script path: misc/cronjobs/import_webservice_batch.pl

Does: processes import bach queues of type “webservice”. Batches can also be processed through the UI.

Nota

This script is used for OCLC Connexion

Connexion import daemon

Script path: misc/bin/connexion_import_daemon.pl

Does: listens for OCLC Connexion requests and is compliant with OCLC Gateway specification. It takes requests with MARC XML and import batch parameters from a configuration file and forwards it to svc/import_bib

Nota

This script is used for OCLC Connexion

Batch item deletion

Script path: misc/cronjobs/delete_items.pl

Does: generates a query against the items database and deletes the items matching the criteria specified in the command line arguments.

PARAMETERS

  • –verbose Send the «WHERE» clause generated by the collected C<–where> arguments, as well as items affected to Standard Out.

  • –where The C<–where> option may called multiple times. The following argument must be a syntactically valid SQL statement which is part of the C<WHERE> clause querying the items table. These are joined by C<AND>.

  • –commit No items will be deleted unless the C<–commit> flag is present.

EXAMPLES

The following are examples of this script:

delete_items.pl –where «items.withdrawn ! 0» –where «items.withdrawn_on < $(date –date=»13 month ago» –rfc-3339=date)» –commit

delete_items.pl –where «itemlost >= “1”» –where «itemlost <=”4”» –where «itemlost_on < “2014-04-28”» –commit

Check URL quick

Script path: misc/cronjobs/check-url-quick.pl

Nota

This script replaces the deprecated check-url.pl script

Does: checks URLs from biblio records; scans all URLs found by default in 856$u of bibliographic records and displays if resources are available or not.

PARAMETERS

  • –host=http://default.tld Server host used when URL doesn’t have one, i.e. doesn’t begin with “http:”. For example, if –host=mylib.com, then when 856$u contains “img/image.jpg”, the url checked is: http://www.mylib.com/image.jpg.

  • –tags Tags containing URLs in $u subfields. If not provided, 856 tag is checked. Multiple tags can be specified, for example:

    check-url-quick.pl –tags 310 410 856

  • –verbose|v Outputs both successful and failed URLs.

  • –html Formats output in HTML. The result can be redirected to a file accessible by http. This way, it’s possible to link directly to the bibliographic record in edit mode. With this parameter –host-intranet is required.

  • –host-intranet=http://koha-pro.tld Server host used to link to bibliographic record editing page in Koha intranet interface.

  • –timeout=10 Timeout for fetching URLs. By default 10 seconds.

  • –maxconn=1000 Number of simultaneous HTTP requests. By default 200 connections.

Delete records via leader

Script path: misc/cronjobs/delete_records_via_leader.pl

Does: attempts to delete any MARC records where the leader character 5 equals “d”.

PARAMETERS

  • -c|–confirm Script will do nothing without this parameter

  • -v|–verbose Verbose mode

  • -t|–test Test mode, does not delete records. Test mode cannot determine if a record/item will be deleted successfully, it will only tell you what records and items the script will attempt to delete.

  • -i|–delete-items Try deleting items before deleting record. Records with items cannot be deleted.

Update authorities

Script path: misc/cronjobs/merge_authorities.pl

Does: updates biblio data with changes to authorities records

Nota

El nombre de este script es engañoso. Este script no combina autoridades juntas, en cambio, combina datos de autoridad con registros bibliográficos enlazados. Ediciones a los registros de autoridades serán aplicados a registros bibliográficos que utilizan esas autoridades cuando este script se está ejecutando.

Required by: AuthorityMergeLimit system preference

Frecuencia sugerida: todas las noches

Serials update

Ruta del script: misc/cronjobs/serialsUpdate.pl

Qué hace: comprueba si existe un ejemplar «retrasado» en las suscripciones activas, y si existe, el script lo pondrá como retrasado, y agregará el siguiente como «esperado».

Frecuencia sugerida: todas las noches

Automatic item update

Script path: misc/cronjobs/automatic_item_modification_by_age.pl

Does: updates items based on the list of rules set forth in the Modificaciones automáticas de ítems por edad tool

Required by: Modificaciones automáticas de ítems por edad

Frecuencia sugerida: todas las noches

OPAC

RSS feeds

Ruta del script: misc/cronjobs/rss/rss.pl

Does: produces an RSS XML document for any SQL query (not used for search results RSS feed). Learn more.

Frecuencia sugerida: cada hora

Authorities browser

Script path: misc/cronjobs/build_browser_and_cloud.pl

Does: generates content for authorities browse in OPAC

Required by: OpacBrowser system preference

Importante

Esta preferencia y el cron job debería aplicarse solo en los sistemas franceses.

Subject/author clouds

Ruta del script: misc/cronjobs/cloud-kw.pl

Does: generates HTML keywords clouds from Koha Zebra indexes. misc/cronjobs/cloud-sample.conf has a sample of how this script operates.

Frecuencia: Este es el tipo de script que usted puede ejecutar una vez al mes o menos, el contenido generado no va a cambiar mucho con el tiempo.

System administration

Services throttle

Script path: misc/cronjobs/services_throttle.pl

Does: resets the xISBN services throttle

Frecuencia sugerida: todas las noches

Clean up database

Script path: misc/cronjobs/cleanup_database.pl

Does: truncates the sessions table, cleans out old zebraqueue entries, action logs and staged MARC files.

See http://schema.koha-community.org/ for the Koha database schema.

PARAMETERS - –del-exp-selfreg

  • –del-unv-selfreg DAYS

    • Delete all unverified self registrations in borrower_modifications older than DAYS.

  • –deleted-catalog DAYS

    • Purge bibliographic records deleted more than DAYS days ago from tables deletedbiblio, deletedbiblio_metadata, deletedbiblioitems and deleteditems.

  • –deleted-patrons DAYS

    • Purge patrons deleted more than DAYS days ago from the deletedborrowers table.

  • –fees DAYS

    • Purge entries in the accountlines table older than DAYS days, where the amountoutstanding is 0 or NULL.

    • In the case of –fees, DAYS must be greater than or equal to 1.

  • -h|–help

    • Get help message

  • –import DAYS

    • Purge entries from import tables older than DAYS days.

    • This includes import_batches, import_biblios, import_items, import_record_matches and import_records.

    • In import_batches, the batches that are the result of Z39.50 searches are removed with the –z3950 parameter.

    • Defaults to 60 days if no days specified.

  • --list-invites

    DAYS

    • Purge (unaccepted) list share invites from the virtualshelfshares table older than DAYS days

    • Defaults to 14 days if no days specified.

  • –logs DAYS

    • Purge entries from the action_logs table older than DAYS days.

    • Defaults to 180 days if no number of days specified.

  • –log-modules

  • –preserve-logs

  • -m|–mail DAYS

    • Purge entries from the message_queue table that are older than DAYS days.

    • Defaults to 30 days if no days specified.

  • –merged

    • Purge completed entries from the need_merge_authorities table.

  • –oauth-tokens

    • Delete expired OAuth2 tokens

  • –old-issues DAYS

    • Purge checkouts returned more than DAYS days ago from the old_issues table.

  • –old-reserves DAYS

    • Purge holds more than DAYS old from the old_reserves table.

  • –restrictions DAYS

    • Purge patrons restrictions from the borrower_debarments table expired since more than DAYS days.

    • Defaults to 30 days if no days specified.

  • –all-restrictions

    • Purge all expired patrons restrictions from the borrower_debarments table.

  • –searchhistory DAYS

    • Purge entries from the search_history table older than DAYS days.

    • Defaults to 30 days if no days specified

  • –sessions

    • Purge the sessions table.

    • If you use this while users are logged into Koha, they will have to reconnect.

  • –sessdays DAYS

    • Purge only sessions older than DAYS days.

  • –statistics DAYS

    • Purge entries from the statistics tables that are more than DAYS days old.

  • –temp-uploads

    • Delete temporary uploads from the uploaded_files table older than the number of days specified in the UploadPurgeTemporaryFilesDays system preference.

  • –temp-uploads-days DAYS

  • –transfers DAYS

    • Purge transfers completed more than DAYS days ago from the branchtransfers table.

  • –unique-holidays DAYS

    • Delete all unique holidays from the special_holidays table older than DAYS

  • –uploads-missing FLAG

    • Delete upload records for missing files when FLAG is true, count them otherwise

  • -v|–verbose

    • verbose mode

  • –zebraqueue DAYS

    • Purge completed zebraqueue entries older than DAYS days.

    • Defaults to 30 days if no days specified.

  • –z3950

    • Purge records from import tables that are the result of Z39.50 searches.

    • To purge all other import information, see the –import parameter above.

Share usage stats

Script path: misc/cronjobs/share_usage_with_koha_community.pl

Does: sends your info to the Hea website if you’re sharing information via the UsageStats feature

Frecuencia: mensual

Adquisiciones

Limpiar sugerencias antiguas

Script path: misc/cronjobs/purge_suggestions.pl

Does: removes old suggestions from the suggestion management area.

PARAMETERS

  • help|?

    Show help message

  • days

    Define the age of suggestions to be deleted, based on “managed on” date

    Nota

    The system preference PurgeSuggestionsOlderThan can also be used to define the number of days used in the script. If using the system preference, don’t use the “days” parameter.

    Nota

    The number of days is based on the “managed on” date of the suggestion.

  • confirm

    This parameter is mandatory for the script to run.

Email suggestions to process

Script path: misc/cronjobs/notice_unprocessed_suggestions.pl

Does: generates a notice to the fund owner that there are suggestions in need of processing

EDI message processing

Script path: misc/cronjobs/edi_cron.pl

Does: sends and received EDI messages

Frecuencia sugerida: cada 1-4 horas

Remove temporary EDI files

Script path: misc/cronjobs/remove_temporary_edifiles.pl

Does: removes temporary EDI files that are older than 5 days

Informes

Run report

Script path: misc/cronjobs/runreport.pl

Does: runs pre-existing saved reports

PARAMETERS

  • -v|–verbose Verbose output

  • –format=s Selects format. Choice of text, html, csv or tsv

  • -e|–email Whether or not to use e-mail (implied by –to or –from)

  • -a|–attachment Attach the report as a file. Cannot be used with html format

  • –username Username to pass to the SMTP server for authentication

  • –password Password to pass to the SMTP server for authentication

  • –method The type of authentication, i.e. LOGIN, DIGEST-MD5, etc.

  • –to=s E-mail address to send report to

  • –from=s E-mail address to send report from

  • –subject=s Subject for the e-mail

  • –store-results Store the result of the report

  • –csv-header Add column names as first line of csv output

ARGUMENTS

  • reportID Report ID Number from saved_sql.id, multiple ID’s may be specified

Social data

Get report social data

Script path: misc/cronjobs/social_data/get_report_social_data.pl

Does: downloads data from Babelthèque to add to OPAC records

Frecuencia sugerida: todas las noches

Update social data

Script path: misc/cronjobs/social_data/update_social_data.pl

Does: updates OPAC records with Babelthèque social data

Daemons

Daemons are continuously running tasks that help support Koha operation. Your database and web-server are run as daemons. Newer versions of Koha start two different daemons for most koha instances:

  • zebra - this is the index server

  • koha-indexer - this daemon updates the index server with new and modified data (biblios and authorities)

These daemons are started by the script /etc/init.d/koha-common.

Zebra indexer daemon

Script path: /usr/sbin/koha-indexer (invoked from /etc/init.d/koha-common)

The koha-indexer script invokes rebuild_zebra.pl in daemon mode. In this mode, the script will run continuously and check the database for new or modified data every 30 seconds. New or modified records are then sent to Zebra for indexing, which only takes a second or so. The advantage of this approach is a search system which is much more responsive to changes, compared to the cron job approach.

Scripts no aprobados

Éstos no se deberían ejecutar sin modificar:

Script path: misc/cronjobs/update_items.pl

Ruta del script: misc/cronjobs/smsoverdues.pl

Ruta del script: misc/cronjobs/notifyMailsOp.pl

Ruta del script: misc/cronjobs/reservefix.pl

Script path:misc/cronjobs/zebraqueue_start.pl