Administração

Basic parameters

Get there: More > Administration

Important

Configure all ‘parameters’ in the order they appear.

Bibliotecas

Quando configurar o Koha você provavelmente irá adicionar informação sobre cada biblioteca que utiliza o sistema. Estes dados serão utilizados em diversas áreas do Koha.

• Get there: More > Administration > Basic parameters > Libraries

When visiting this page you are presented with a list of the libraries that have already been added to the system.

Nota

You can customize the columns of this table in the ‘Table settings’ section of the Administration module (table id: libraries).

Adding a library

Para adicionar uma nova biblioteca:

• Click ‘New library’

• The top of the form asks for some basics about the library

  

  • Library code (required): the code should not contain any spaces or hyphens and be 10 or fewer characters. This code will be used as a unique identifier in the database.

  • Name (required): the name will be displayed on the OPAC and staff interface wherever the library name displays, and should be a name that makes sense to your patrons and staff.

• Next you can enter basic contact info about the branch

  

  • Address, city, state, zip/postal code, country, phone, fax: the address and contact fields can be used to make notices custom for each library, they will also be displayed in the ‘Libraries’ page of the OPAC, if this library is set as ‘Public’

  • Email: the email address field is not required, but it should be filled for every library in your system

    Nota

    Não esqueça de inserir um endereço de e-mail da biblioteca para garantir que os avisos sejam enviados a partir do endereço correto

    Nota

    If no email address is entered here, the address in the KohaAdminEmailAddress system preference will be used to send notices from this library

  • ILL staff email: if this library uses a specific email address for interlibrary loan management, enter it here

    Nota

    If no email address is entered here, the address in the ILLDefaultStaffEmail system preference will be used to receive ILL requests to this library

  • Reply-To: you can enter a different ‘Reply-To’ email address. This is the email address that all replies will go to.

    Nota

    If no email address is entered here, the address in the ReplytoDefault system preference will be used to receive replies to this library

  • Return-Path: you can enter a different ‘Return-Path’ email address. This is the email address that all bounced messages will go to.

    Nota

    If no email address is entered here, the address in the ReturnpathDefault system preference will be used to receive bounced messages from this library.

  • SMTP server: if this library uses a different SMTP server from the default, specify it here.

  • URL: if this field is populated, the library name will be linked in the holdings table on the OPAC

    

  • OPAC info: this leads to the HTML customization tool, so that you can add additional information about the library. This information will appear in the ‘Libraries’ page in the OPAC, as well as in the holdings table in the OPAC.

    

    Clicking on the library name that has a small ‘i’ icon next to it will open a pop-up with the information.

    

  • IP: this field does not have be filled in unless you plan on limiting access to the staff interface to a specific IP address

    Aviso

    An IP address is required if you have enabled AutoLocation

  • MARC organization code: if this library has a specific MARC organization code, you can enter it here.

    Nota

    If left blank, the code entered in the MARCOrgCode system preference will be used for this library.

  • Notes: if you have any notes you can put them here. These will not show in the OPAC.

  • Pickup location: choose whether this library will display as an available pickup location for holds.

  • Public: choose whether this library will appear in the ‘Libraries’ page on the OPAC, as well as as a limit option in the OPAC advanced search.

Editing/deleting a library

From the libraries table, click ‘Edit’ or ‘Delete’ to edit or delete a library.

Aviso

You will be unable to edit the ‘Library code’.

Aviso

Você não será capaz de excluir uma biblioteca que possui usuários ou exemplares ligados a ela.

Library groups

Library groups can serve four purposes: to limit access to patron data, to limit OPAC searches, to limit staff searches, and/or to define holds behavior.

• Get there: More > Administration > Basic Parameters > Library groups

When visiting this page you are presented with a list of the groups that have already been added to the system.

Adicionar grupo

Click the ‘Add Group’ button at the top of the screen

• Give the group a title and a description. Only the title is mandatory as it will show up in the staff client and in the OPAC. The description is only used in this page to give an idea of what the group is used for.

• You can limit staff from seeing other groups’ patrons by checking the box next to the ‘Limit patron data access by group’ option.

  Note

  This can be overridden with the user permission view_borrower_infos_ from_any_libraries.

• If you want the group to show up in the library pulldown menu at the top of the OPAC (with OpacAddMastheadLibraryPulldown set to ‘Add’) and on the advanced search page you can check the ‘Use for OPAC search groups’ box.

• If you want the group to appear in the library pulldown in the staff client advanced search, check the ‘Use for staff search groups’ box.

• If you want to use this group to define holds rules, check the ‘Is local hold group’ box.

Adding a library to a group

Click on the ‘Add library’ button next to the group to add a library to this group. You will be presented with a list of the libraries that are not already in the group.

Adding a sub-group

If your system is very large, you can create sub-groups. Click on the ‘Actions’ button next to the group and select the ‘Add a sub-group’ option. Fill in the title and the description (optional) of the sub-group. The features will be inherited from the parent group.

Deleting a group

To delete a group, click on the ‘Actions’ button next to the group and select the ‘Delete’ option.

Circulation desks

Koha allows you to define several circulation desks within a single library. For example, if you have an adult circulation desk and a children’s circulation desk, or if you have a different desk for each floor or each department.

Make sure to enable the UseCirculationDesks system preference to use this functionality.

• Get there: More > Administration > Basic parameters > Desks

Adding circulation desks

To add a new circulation desk, click on the ‘New desk’ button at the top of the page.

• In the ‘Desk’ field, enter a name for your desk.

• Choose the library in which this desk is.

• Click ‘Submit’.

Editing a circulation desk

To edit an existing circulation desk, click on the ‘Edit’ button to the right of the desk to modify.

From there, you can change the name and/or the library of the desk.

Deleting a circulation desk

To delete an existing circulation desk, click on the ‘Delete’ button to the right of the desk to remove.

Item types

O Koha permite que você organize seu acervo por tipo de material e código de coleção.

• Get there: More > Administration > Basic parameters > Item types

Item types typically refer to the material type (Book, CD, DVD, etc), but can be used in any way that works for your library.

Note

• You can customize the columns of this table in the ‘Table settings’ section of the Administration module (table id: table_item_type).

Adding item types

To add a new item type, simply click the ‘New item type’ button at the top of the Item types page.

• In the ‘Item type’ field, enter a short code for your item type (maximum of 10 characters)

• The the ‘Parent item type’ field, you can choose an item type that will act as a parent category for this item type. You can then define circulation rules based on those parent item types.

  • For example, you could have DVD and Blu-ray item types, and the DVD would be the parent of the Blu-ray item type.

    

    You can then create a circulation rule for either Blu-ray only or DVD and Blu-ray (DVD (All))

    

• The description is the plain text definition of the item type (for those with multiple languages installed you can translate the item type description in to all of those languages using the ‘Translate in to other languages’ link)

• Item types can be grouped together for searching at the same time. For example you can put DVDs and Blu-rays in to a group called Movie and then they can be searched together. These groups are defined in the ITEMTYPECAT authorized value category.

• You can choose to have an image associated with your item type

  • Você pode escolher a partir de uma série de imagens

  • Você pode linkar a uma imagem remota

  • Ou você pode não ter nenhuma imagem associada a um tipo de material

    Aviso

    If this option is not enabled, you can change the setting of the noItemTypeImages or OPACNoItemTypeImages.

    Nota

    To have your item type images appear in the OPAC you need to set OPACnoItemTypeImages to ‘Show’.

• For items that you are suppressing from the OPAC you can hide their item type from being searched in the OPAC

  Note This will not prevent those items to appear in search results, it will simply remove the item type from the advanced search form.

  If you want to completely hide items from a certain item type, let’s say that you have a professional library with books reserved for staff and you don’t want those to appear in the OPAC, use the OpacHiddenItems system preference.

• For items that do not circulate, check the ‘Not for loan’ options

  • Exemplares marcados como ‘Não circula’ aparecerão no catálogo, mas não poderão ser emprestados para usuário

• For items that are not physical, but for which you still have circulation rules, such as museum passes or ebooks, you can set up automatic checkins.

  • Check the ‘Automatic checkin’ box

  • Schedule the cronjob misc/cronjobs/automatic_checkin.pl.

• For items that you charge a rental fee for, there are several ways that rental fees can be charged to a patron by item type. A flat rental charge (process fee) or a daily/hourly rental charge.

  • For items that a library would charge a flat rental charge (process fee) for, enter the total fee you charge in the ‘Rental charge’ field. This will charge the patron on checkout (and renewal).

  • For items that a rental charge will be charged by the number of days the item is checked out for, enter the daily fee in the ‘Daily rental charge’. This will be charged to the patron upon checkout - the cost per day and how many days this item can be checked out to the patron. This daily rental charge will also be applied if/when a renewal occurs.

    • Check the ‘Daily rentals use calendar’, to exclude holidays from the the rental fee calculation.

  • For items that are loaned out hourly, enter the cost per hour in ‘Hourly rental charge’. Again, the total (hourly cost * number of hours loaned) will be charged to the patron upon checkout and renewal.

    • Check the ‘Hourly rentals use calendar’, to exclude holidays from the the rental fee calculation.

  • Each amount will charge the patron on checkout.

    Important

    Do not enter symbols in this field, only numbers and decimal points (ex. $5.00 should be entered as 5 or 5.00)

• You can add a default replacement cost for this type of item. This is the amount that will be charged to the patron when lost if the item doesn’t have a replacement cost. If the item has a replacement cost, that is the amount that will be charged to the patron.

  Important

  Do not enter symbols in this field, only numbers and decimal points (ex. $5.00 should be entered as 5 or 5.00)

• You can also add a processing fee that will be added to the replacement cost.

  Important

  Do not enter symbols in this field, only numbers and decimal points (ex. $5.00 should be entered as 5 or 5.00)

• If you would like a message or alert to appear when items of this type are checked in you can enter that in the ‘Checkin message’ box

  

  • The check-in message type can be a ‘message’ or an ‘alert’. The only difference between these two is the styling. By default a message is blue

    

    and an alert is yellow.

    

• Some SIP devices need you to use a SIP-specific media type instead of Koha’s item type (usually lockers and sorters need this media type). If you use a device like this you’ll want to enter the SIP media type.

• If this item type is only to be used in certain libraries, you can select them here. Select ‘All libraries’ if this item type is used across the library system.

  Note

  If this is left blank, ‘All libraries’ is assumed.

  Note

  To select more than one library, hold the ‘Ctrl’ key while selecting the libraries.

• When finished, click ‘Save changes’

  Note

  All fields, with the exception of the ‘Item type’ will be editable from the item types list

• Seu novo tipo de material aparecerá na lista

  

Editing item types

Each item type has an Edit button beside it. To edit an item simply click the ‘Edit’ button.

Important

You will not be able to edit the code you assigned as the ‘Item type’ but you will be able to edit the description for the item.

Deleting item types

Each item has a Delete button beside it. To delete an item type, simply click the ‘Delete’ button.

Important

Você não será capaz de excluir tipos de materiais que estão sendo utilizados em exemplares cadastrados no sistema.

Authorized values

Authorized values can be used in several areas of Koha. They are lists of controlled terms, phrases or codes.

For example, one reason you would add an authorized value category would be to control the values that can be entered into MARC fields by catalogers.

• Get there: More > Administration > Basic parameters > Authorized values

Existing authorized values categories

Koha installs with pre-defined authorized values categories that your library is likely to use or that are used by the system.

• AR_CANCELLATION

  • Reasons why an article request might have been cancelled

  • If you chose to install the default values for this category, you will have

    • Item could not be located on shelves (NOT_FOUND)

    • Item was found to be too damaged to fill article request (DAMAGED)

    • Cancelled from the OPAC user page (OPAC)

    You can change those to suit your organization’s needs.

• Asort1

  • Used for acquisitions statistical purposes. You can use this as statistical categories when creating a fund in acquisitions.

• Asort2

  • Used for acquisitions statistical purposes. You can use this as statistical categories when creating a fund in acquisitions.

• BOR_NOTES

  • Values for pre-defined patron messages that appear on the circulation screen and the patron’s account on the OPAC. Write the message you want to appear in the Description field. Note that this field is limited to 200 characters.

    

• Bsort1

  • Values that can be entered to fill in the patron’s sort 1 field

• Bsort2

  • Values that can be entered to fill in the patron’s sort 2 field

• CAND

  • A list used in UNIMARC

• CCODE

  • Collection codes (appears when cataloging and working with items)

  • This is normally mapped to items.ccode in the Koha database.

  • If you chose to install the default values for this category, you will have

    • Fiction (FIC)

    • Non-fiction (NFIC)

    • Reference (REF)

    You can change those to suit your organization’s needs.

    Aviso

    For best results when searching, avoid using hyphens in location codes.

• CONTROL_NUM_SEQUENCE

  • Used to generate control numbers in the advanced cataloging editor. Enter a string ending with a number as the authorized value and use the description to describe the type of number. For example: ‘sprLib0001’ ‘Springfield library’. In the advanced editor this will activate a new widget that will allow you to choose the type of number and generate the next number in the sequence.

• COUNTRY

  • A list of country names used in UNIMARC 102 $a

• DANIFICADO

  • Descriptions for items marked as damaged (appears when cataloging and working with items).

  • This is normally mapped to items.damaged in the database.

  • If you chose to install the default values for this category, you will have

    • Damaged (1)

    You can change those to suit your organization’s needs, but the values must be numerical.

  Aviso

  The authorized values for DAMAGED must be numerical.

• DEPARTMENT

  • Departments are required by and are used in the course reserves module

• ERM_AGREEMENT_STATUS

  • Used to describe the status of an agreement record in the e-resources management module.

  • Can also be used in reporting.

  • Default values are

    • Active (active)

    • In negotiation (in_negotiation)

    • Closed (closed)

      Aviso

      Do not change the authorized value for ‘Closed’ (the description can be changed), it is used to activate the ‘Closure reason’ drop-down menu.

• ERM_AGREEMENT_CLOSURE_REASON

  • Used to describe the closure reason for an agreement record once the has been marked as Closed in the e-resources management module.

  • Can also be used in reporting.

  • Default values are

    • Expired (expired)

    • Cancelled (cancelled)

• ERM_AGREEMENT_RENEWAL_PRIORITY

  • Used to describe the renewal priority for an agreement record in the e-resources management module, in order to flag up how important the renewal of that agreement is.

  • Can also be used in reporting.

  • Default values are

    • For review (for_review)

    • Renew (renew)

    • Cancel (cancel)

• ERM_AGREEMENT_USER_ROLES

  • Used to describe the role of a staff user who is attached to an agreement or license record in the e-resources management module.

  • Default values are

    • ERM librarian (librarian)

    • Subject specialist (subject_specialist)

• ERM_LICENSE_TYPE

  • Used to describe the type of license in the e-resources management module.

  • Can also be used in reporting.

  • Default values are

    • Local (local)

    • Consortial (consortial)

    • National (national)

    • Alliance (alliance)

• ERM_LICENSE_STATUS

  • Used to describe the status of a license record in the e-resources management module. Helps staff flag up licenses in their life cycle. Can also be used in reporting.

  • Can also be used in reporting.

  • Default values are

    • In negotiation (in_negotiation)

    • Not yet active (not_yet_active)

    • Active (active)

    • Rejected (rejected)

    • Expired (expired)

• ERM_AGREEMENT_LICENSE_STATUS

  • Used to describe the status of a license linked to an agreement record in the e-resources management module. Helps staff flag licenses in their life cycle.

  • Can also be used in reporting.

  • Default values are

    • Controlling (controlling)

    • Future (future)

    • Historic (historic)

• ERM_AGREEMENT_LICENSE_LOCATION

  • Used to describe the physical location of an license record in the case where you may still have a paper copy of the license (rather than electronic)

  • Default values are

    • Filing cabinet (filing cabinet)

    • Cupboard (cupboard)

• ERM_PACKAGE_TYPE

  • Used to describe the types of package in the e-resources management module.

  • For local packages only

  • Default values are

    • Local (local)

    • Complete (complete)

• ERM_PACKAGE_CONTENT_TYPE

  • Used to describe the types of material found in a local package in the e-resources management module.

  • For local packages only

  • Default values are

    • Aggregated full (AggregatedFullText)

    • Abstract and index (AbstractAndIndex)

    • E-book (EBook)

    • E-journal (EJournal)

    • Mixed content (MixedContent)

    • Online reference (OnlineReference)

    • Print (Print)

    • Streaming media (StreamingMedia)

    • Unknown (Unknown)

• ERM_TITLE_PUBLICATION_TYPE

  • Used to describe the type of material of a title in the e-resources management module.

  • For local titles only

  • Default values are

    • AudioBook (audiobook)

    • Book (book)

    • Bookseries (bookseries)

    • Database (database)

    • E-book (ebook)

    • Journal (journal)

    • Newsletter (newsletter)

    • Newspaper (newspaper)

    • Proceedings (proceedings)

    • Report (report)

    • Streaming audio (streamingaudio)

    • Streaming video (streamingvideo)

    • Thesis/Dissertation (thesisdissertation)

    • Unspecified (unspecified)

    • Website (website)

• ETAT

  • Used in French UNIMARC installations in field 995 $o to identify item status. Similar to NOT_LOAN

• HINGS_AS

  • General holdings: acquisition status designator :: This data element specifies acquisition status for the unit at the time of the holdings report.

• HINGS_C

  • General holdings: completeness designator

• HINGS_PF

  • Physical form designators

• HINGS_RD

  • General holdings: retention designator :: This data element specifies the retention policy for the unit at the time of the holdings report.

• HINGS_UT

  • General holdings: type of unit designator

• HOLD_CANCELLATION

  • Reasons why a hold might have been canceled. These are used when cancelling holds.

  • If you chose to install the default values for this category, you will have

    • Item could not be located on shelves (NOT_FOUND)

    • Item was found to be too damaged to fill hold (DAMAGED)

    You can change those to suit your organization’s needs.

• HSBND_FREQ

  • Delivery frequencies used by the housebound module. They are displayed on the housebound tab in the patron’s account in the staff interface.

  • If you chose to install the default values for this category, you will have

    • Every week (EW)

    You can change those to suit your organization’s needs.

• ILLSTATUS

  • Interlibrary loan (ILL) request statuses used in the ILL module.

• ITEMTYPECAT

  • Search categories for item types. These values allow multiple item types to be searched at the same time.

  • To combine item types in categories, choose the category in the item type settings.

  • For example, an ITEMTYPECAT value could be ‘NEW’. This search category could be set for the item types ‘NEW BOOKS’ and ‘NEW DVDS’. This will replace NEW BOOKS and NEW DVDS item types in the advanced search form by ‘NEW’. When a patron chooses the searched for the category ‘NEW’, they will search multiple item types with a single search.

• LANG

  • A list of ISO 639-2 standard language codes.

• LOC

  • Shelving locations (usually appears when adding or editing an item).

  • This is normally mapped to items.location in the Koha database.

  • If you chose to install the default values for this category, you will have

    • Audio visual (AV)

    • Book cart (CART)

      • CART is used by UpdateItemLocationOnCheckin

    • Children’s area (CHILD)

    • Fiction (FIC)

    • General stacks (GEN)

    • New materials shelf (NEW)

    • On display (DISPLAY)

    • Processing center (PROC)

      • PROC can be used with NewItemsDefaultLocation and UpdateItemLocationOnCheckin.

    • Reference (REF)

    • Staff office (STAFF)

    You can change those to suit your organization’s needs.

    Aviso

    For best results when searching, avoid using hyphens in location codes.

• EXTRAVIADO

  • Descriptions for the items marked as lost (appears when adding or editing an item).

  • This is normally mapped to items.itemlost in the Koha database.

  • If you chose to install the default values for this category, you will have

    • Lost (1)

    • Long overdue (lost) (2)

    • Lost and paid for (3)

    • Missing (4)

    • Missing from bundle (5)

    You can change those to suit your organization’s needs, but the values must be numerical.

  Aviso

  The authorized values for LOST must be numerical.

• OPAC_SUG

  • A list of reasons displayed in the suggestion form on the OPAC.

  • If you chose to install the default values for this category, you will have

    • The copy on the shelf is damaged (damaged)

    • Upcoming title by popular author (bestseller)

    You can change those to suit your organization’s needs.

• NOT_LOAN

  • Reasons why a title is not for loan (appears when adding or editing an item)

  • This is normally mapped to items.notforloan in the Koha database.

  • If you chose to install the default values for this category, you will have

    • On order (-1)

    • Not for loan (1)

    • Staff collection (2)

    • Added to bundle (3)

    You can change those to suit your organization’s needs, but the values must be numerical.

  Aviso

  The authorized values for NOT_LOAN must be numerical.

  • Negative number values will still allow holds (use for ‘on order’ statuses, for example)

  • Positive numbers will not allow holds or checkouts.

  • A value of 0 means ‘for loan’.

• ORDER_CANCELLATION_REASON

  • Reasons why an order might have been canceled, used in acquisitions

  • If you chose to install the default values for this category, you will have

    • No reason provided (0)

    • Out of stock (1)

    • Restocking (2)

    You can change those to suit your organization’s needs.

• PA_CLASS

  • Values used to group patron attributes together in the patron add form

• PAYMENT_TYPE

  • Populates a dropdown list of custom payment types when paying fines

  • If you chose to install the default values for this category, you will have

    • Cash via SIP2 (SIP00)

    • Visa via SIP2 (SIP01)

    • Creditcard via SIP2 (SIP02)

    You can change those to suit your organization’s needs.

• qualif

  • Function codes (author, editor, collaborator, etc.) used in UNIMARC 7XX $4 (French)

• RELTERMS

  • French terms of relations

• REPORT_GROUP

  • A way to sort and filter your reports. These will appear as tabs in the saved reports page.

  • If you chose to install the default values for this category, you will have

    • Account (ACC)

    • Acquisitions (ACQ)

    • Catalog (CAT)

    • Circulation (CIRC)

    • Patrons (PAT)

    • Serials (SER)

    You can change those to suit your organization’s needs.

• REPORT_SUBGROUP

  • These values can be used to further sort and filter your reports.

  • Values here need to include the authorized value code from REPORT_GROUP in the Description (OPAC) field to link the subgroup to the appropriate group.

    

• RESTRITO

  • Restricted status of an item (appears when adding or editing an item)

  • This is normally mapped to items.restricted in the Koha database.

  • If you chose to install the default values for this category, you will have

    • Restricted access (1)

    You can change those to suit your organization’s needs, but the values must be numerical.

  Aviso

  The authorized values for this category must be numerical.

• RETURN_CLAIM_RESOLUTION

  • Reasons why a return claim has been resolved

  • If you chose to install the default values for this category, you will have

    • Returned by patron (RET_BY_PATRON)

    • Found in library (FOUND_IN_LIB)

    You can change those to suit your organization’s needs.

• ROADTYPE

  • Road types to be used in patron addresses (‘street type’ field in the patron form)

• SIP_MEDIA_TYPE

  • Used when creating or editing an item type to assign a SIP specific media type for devices like lockers and sorters.

  • If you chose to install the default values for this category, you will have

    • Other (000)

    • Book (001)

    • Magazine (002)

    • Bound journal (003)

    • Audio tape (004)

    • Video tape (005)

    • CD/CDROM (006)

    • Diskette (007)

    • Book with diskette (008)

    • Book with CD (009)

    • Book with audio tape (010)

  Aviso

  SIP media types are limited to 3 characters. Make sure your authorized values for SIP_MEDIA_TYPE do not have more than 3 characters.

• STACK

  • Shelving control number (appears when adding or editing an item)

  • This is normally mapped to items.stack in the Koha database.

  Aviso

  The authorized values for this category must be numerical.

• SUGGEST

  • Reasons for acceptance or rejection of suggestions in acquisitions (appears when managing suggestions)

  • If you chose to install the default values for this category, you will have

    • Available via ILL (AVILL)

    • Bestseller (BSELL)

    • Document not corresponding to our acquisition policy (Poldoc)

    • Document too expensive (Expensive)

    • Insufficient budget (Budget)

    • Library copy lost (LCL)

    • Shelf copy damaged (SCD)

    You can change those to suit your organization’s needs.

• SUGGEST_FORMAT

  • List of item types to display in a drop down menu on the suggestion form on the OPAC.

  • If you chose to install the default values for this category, you will have

    • Audiobook (AUDIOBOOK)

    • Book (BOOK)

    • EBook (EBOOK)

    • DVD (DVD)

    • Large print (LP)

    You can change those to suit your organization’s needs.

    Aviso

    Suggestion format types are limited to 30 characters. Make sure your authorized values for this category do not have more than 30 characters.

• SUGGEST_STATUS

  • A list of additional custom status values for suggestions that can be used in addition to the default values.

    Aviso

    The suggestion status is limited to 10 characters. Make sure your authorized value does not have more than 10 characters.

• TERM

  • Terms to be used in Course Reserves module. Enter terms that will show in the drop down menu when setting up a Course reserve. (For example: Spring, Summer, Winter, Fall).

• UPLOAD

  • Categories to be assigned to file uploads. Without a category, an upload is considered temporary and may be removed during automated cleanup.

• DESCARTE

  • Description of a withdrawn item (appears when adding or editing an item)

  • This is normally mapped to items.withdrawn in the Koha database.

  • If you chose to install the default values for this category, you will have

    • Withdrawn (1)

    You can change those to suit your organization’s needs, but the values must be numerical.

  Aviso

  The authorized values for this category must be numerical.

• YES_NO

  • A generic authorized value field that can be used anywhere you need a simple yes/no pull down menu.

  • If you chose to install the default values for this category, you will have

    • Yes (1)

    • No (0)

  Aviso

  In general, binary fields require a 1 or 0 value. If you change these values, make sure the field you intend to attach it to can take other values than 0 or 1.

Adding new authorized value categories

In addition to the existing categories that come by default with Koha, librarians can add their own authorized value categories to control data that is entered into the system.

To add a new category:

• Click ‘New category’

  

• Limit your category code to 32 characters (something short to make it clear what the category is for)

  Aviso

  A category code cannot have spaces or special characters other than underscores and hyphens in it.

Proceed to add a new authorized value to the category.

Adding new authorized values

New authorized values can be added to any existing or new category.

To add a value:

• From the categories list, click the ‘Add’ button on the right of the category

  

  • Alternatively, click on the category name, and then click ‘New authorized value for …’

    

  • If the category has no values yet, click on the ‘Add a new authorized value’ button at the bottom of the page

    

• Fill out the form

  

  • Authorized value: enter a code for your authorized value

    Nota

    Authorized value is limited to 80 characters and cannot have spaces or special characters other than underscores and hyphens in it.

    Some categories, such as SUGGEST_STATUS, may have stricter limits. Refer to the Existing authorized values categories section above for specifid limits.

  • Description: use this field for the actual value that will be displayed.

  • Description (OPAC): if you want a different description to show in the OPAC, enter it here. If this field is empty, the ‘Description’ will be used in both the staff interface and the OPAC.

  • Library limitations: if you would like to limit this authorized value to only specific libraries, you can choose them from this menu. To have it available to all libraries just choose ‘All libraries’ at the top of the list.

  • Choose an icon: you can choose an image that will appear next to the value in the staff interface and OPAC.

    Nota

    This feature doesn’t work everywhere. It’s mostly for item locations (LOC) and collections (CCODE) in the advanced search.

• Clique ‘Salvar’

• O novo valor aparecerá na lista com os valores existentes.

  

Deleting authorized values

To delete an authorized value, click on the ‘Delete’ button at the right of the authorized value.

Once there are no authorized values left in an authorized value category, you can delete the category.

Patrons and circulation

Settings for controlling circulation and patron information.

Patron categories

Categorias de usuários permitem que você organize seus usuários de acordo com suas funções, faixas etárias e tipos.

• Get there: More > Administration > Patrons and circulation > Patron categories

Nota

You can customize the columns of this table in the ‘Table settings’ section of the Administration module (table id: patron_categories).

Adicionar categoria de usuário

To add a new patron category click ‘New category’ at the top of the page

• Category code: an identifier for your new category.

  • The category code is limited to 10 characters (numbers and letters) and must be unique.

  • This field is required in order to save your patron category. If left blank you will be presented with an error.

• Description: a plain text version of the category.

  • The description will be visible throughout Koha.

  • This field is required in order to save your patron category. If left blank you will be presented with an error.

• Enrollment period:

  • In months: should be filled in if you have a limited enrollment period for your patrons. For example, student cards expire after 9 months

  • Until date: you can choose a date when the cards will expire

  • This field is required in order to save your patron category. If left blank you will be presented with an error.

Aviso

You cannot enter both a month limit and a date until for one category. Choose to enter either one or the other.

• Password expiration: enter the number of days after which a patron has to change their password.

• Age required: minimum age (in years) requirement associated with the category. For example, an ‘Adult’ patron category could have a minimum age of 18 years; this means patrons must be at least 18 to be in the patron category.

  • When creating or updating a patron, a warning will appear if the patron is too young for this category.

    

  • This value is used by the update_patrons_category.pl cron job to change the category of patrons who are too young.

• Upper age limit: maximum age (in years) associated with the category. For example, a ‘Children’ patron category could have an upper age limit of 18, meaning patrons can have children cards until they turn 18.

  • When creating or updating a patron, a warning will appear if the patron is too old for this category.

    

  • This value is used by the update_patrons_category.pl cron job to change the category of patrons who are too old.

• Enrollment fee: enter the amount if you charge a membership fee for your patrons (such as those who live in another region).

Aviso

Only enter numbers and decimals in this field.

Nota

Depending on your value for the FeeOnChangePatronCategory system preference, this fee will be charged on patron renewal as well as when they are first enrolled.

• Overdue notice required: choose ‘Yes’ if you want patrons from this category to receive overdue notices. This will enable you to set the overdue notice triggers in the Tools module.

• Lost items in staff interface: decide on a patron category basis if lost items are shown in the staff interface.

  • Shown: lost items are shown in the staff interface.

  • Hidden by default: lost items are hidden, but staff members can click ‘Show all items’ to see them.

Nota

This is only applicable in the staff interface, so changing this value on patron categories who do not have access to the staff interface won’t make any difference.

• Hold fee: enter the fee amount if you charge patrons from this category a fee for placing holds on items.

Aviso

Only enter numbers and decimals in this field.

• Category type: choose one of the six main parent categories

  • Adult: most common patron type, usually used for a general ‘Patron’ category.

  • Child: another common patron type.

  • Staff: library staff

  • Organizational: organizations can be used as guarantors for Professional patrons.

  • Professional: professional patrons can be linked to Organizational patrons.

  • Statistical: this patron type is used strictly for statistical purposes, such as in-house use of items.

  • This field is required in order to save your patron category. If left blank you will be presented with an error.

• Can be guarantee: if the patrons of this category can have guarantors, choose yes. This will make the ‘Patron guarantor’ and ‘Non-patron guarantor’ sections appear in the patron form.

• Branch limitations: if necessary, limit this patron category to only some branches in your library system. Select ‘All branches’ if you would like any library to be able to use this category.

  • To select more than one branch, hold the Ctrl key while making your selection.

• Password reset in OPAC: decide whether patrons of this category are allowed to reset their password through the OPAC’s ‘Forgotten password’ function. By default, it will follow the rule set in the OpacResetPassword system preference.

  • Follow system preference OpacResetPassword.

  • Allowed: patrons of this category will be able to reset their password through the OPAC regardless of the setting in OpacResetPassword.

  • Not allowed: patrons of this category will not be able to reset their password through the OPAC regardless of the setting in OpacResetPassword.

• Password change in OPAC: decide whether patrons of this category are allowed to change their password through the OPAC. By default, it will follow the rule set in the OpacPasswordChange system preference.

  • Follow system preference OpacPasswordChange.

  • Allowed: patrons of this category will be able to change their password through the OPAC regardless of the setting in OpacPasswordChange.

  • Not allowed: patrons of this category will be not able to change their password through the OPAC regardless of the setting in OpacPasswordChange.

• Minimum password length: enter the minimum password length for patrons of this category. Leave blank to use the default length set in the minPasswordLength system preference.

• Require strong password: decide whether to enforce a strong password policy (at least one uppercase letter, one lowercase letter and one digit) for patrons of this category. By default, it will follow the rule set in the RequireStrongPassword system preference.

  • Follow the system preference RequireStrongPassword.

  • Yes: patrons of this category will be required to have a strong password regardless of the setting in RequireStrongPassword.

  • No: patrons of this category will not be required to have a strong password regardless of the setting in RequireStrongPassword.

• Block expired patrons: decide if this patrons from this category are blocked from performing actions in the OPAC if their card is expired. By default it will follow the rule set in the BlockExpiredPatronOpacActions preference.

  • Follow the system preference BlockExpiredPatronOpacActions.

  • Block: patrons of this category whose membership has expired will be blocked from renewing and placing holds in the OPAC, regardless of the setting in BlockExpiredPatronOpacActions.

  • Don’t block: patrons of this category whose membership has expired will not be blocked from renewing and placing holds in the OPAC, regardless of the setting in BlockExpiredPatronOpacActions.

• Check for previous checkouts: if the CheckPrevCheckout system preference is set to either ‘Unless overridden by patron category’ options, you will be able to set the value for this particular patron category here.

  • Yes and try to override system preferences: Koha will check if the patron already checked out this item, unless the patron’s personal settings prevent it.

  • No and try to override system preferences: Koha will not check in the patron already checked out this item, unless the patron’s personal settings permit it.

  • Inherit from system preferences: the setting of the CheckPrevCheckout system preference will be followed.

• Default privacy: choose the default privacy settings for patrons of this category.

  • Default: checkout history will be kept indefinitely, until either the batch_anonymize.pl script is run or there is a manual batch anonymization which is performed.

  • Never: checkout history is anonymized upon return. Statistics are kept, but the link between the checkout, the item and the patron is removed.

  • Forever: checkout history is never anonymized for patrons of this category, regardless of the cron job or manual anonymization.

  • This setting can be edited by the patron via the OPAC if you allow it with the OPACPrivacy system preference.

• Exclude from local holds priority: choose whether holds for patrons of this category are given a priority.

  • Yes: holds for patrons of this category are not given special priority, regardless of the setting in LocalHoldsPriority.

  • No: holds for patrons of this category are subjected to the setting in LocalHoldsPriority.

• Default messaging preferences for this patron category: assign advanced messaging preferences by default to the patron category

  • These default preferences can be changed on an individual basis for each patron. This setting is just a default to make it easier to set up messages when creating new patrons.

Nota

This requires that you have EnhancedMessagingPreferences system preference set to ‘Allow’.

Aviso

These defaults will only be applied to new patrons that are added to the system. They will not edit the preferences of the existing patrons.

If you need to apply the default preferences to existing patrons, you can force those changes by running the borrowers-force-messaging-defaults script found in the misc/maintenance folder. Ask your system administrator for assistance with this script.

Circulation and fines rules

These rules define how your items are circulated, how and when fines are calculated and how holds are handled.

• Get there: More > Administration > Patrons and circulation > Circulation and fines rules

As regras são aplicadas do mais específico para o menos específico, utilizando-se o primeiro encontrado na seguinte ordem:

• same library, same patron category, same item type

• same library, same patron category, all item types

• same library, all patron categories, same item type

• same library, all patron categories, all item types

• default (all libraries), same patron category, same item type

• default (all libraries), same patron category, all item types

• default (all libraries), all patron categories, same item type

• default (all libraries), all patron categories, all item types

The CircControl and HomeOrHoldingBranch also come in to play when figuring out which circulation rule to follow.

• If CircControl is set to “the library you are logged in at” circulation rules will be selected based on the library you are logged in at

• If CircControl is set to “the library the patron is from” circulation rules will be selected based on the patron’s library

• If CircControl is set to “the library the item is from” circulation rules will be selected based on the item’s library where HomeOrHoldingBranch chooses if the item’s home library or its holding library is used.

• If IndependentBranches is set to ‘Prevent’ then the value of HomeOrHoldingBranch is used in figuring out if the item can be checked out. If the item’s home library does not match the logged in library, the item cannot be checked out unless you are a superlibrarian.

  Important

  At the very least you will need to set a default circulation rule. This rule should be set for all item types, all libraries and all patron categories. That will catch all instances that do not match a specific rule. When checking out if you do not have a rule for all libraries, all item types and all patron categories then you may see patrons getting blocked from placing holds.

Defining circulation rules

Using the issuing rules matrix you can define rules that depend on patron category/item type combos.

Nota

The matrix being very wide, you can export the existing rules in Microsoft Excel or CSV format, to look at them, using the ‘Export’ button at the top of the table.

To set your rules, choose a library from the pull down (or ‘Standard rules for all libraries’ if you want to apply these rules to all branches):

No quadro você pode selecionar qualquer combinação de categoria de usuário e tipo de material aos quais as regras se aplicam

• Primeiro escolha qual categoria de usuário que você quer que esta regra seja aplicada. Se você optar por ‘Todos’ será aplicado em todas as categorias

• Choose the item type you would like this rule to apply to. If you leave this to ‘All’ it will apply to all item types for this patron category

  • If an item type has a parent item type, the rule will be displayed as Parent -> Child. The number of current checkouts will be limited to either the maximum for the parent (including sibling types) or the specific type’s rule, whichever is less.

    

    In the example above, there is a rule for the DVD item type with a maximum of 5 checkouts and a rule for Blu-ray, a child of DVD, with a maximum of 2 checkouts. A patron at this library will be able to check out a maximum of 2 Blu-rays in a total of 5 items of either DVD or Blu-ray types.

    To summarize, a patron at this library would be able to take either : - 0 Blu-ray and a maximum of 5 DVDs - 1 Blu-ray and a maximum of 4 DVDs - 2 Blu-ray and a maximum of 3 DVDs

• Add notes about your circulation rule into the notes field. This can be helpful to remember why and when something was last changed.

• Limit the number of items of this type a patron of this category can have checked out at the same time by entering a number in the ‘Current checkouts allowed’ field.

• If you’re allowing on-site checkouts then you may also want to set a limit on the number of items of this type patrons of this category can have on-site.

  • Note

    This setting also depends on the ConsiderOnSiteCheckoutsAsNormalCheckouts preference

• Define the period of time an item of this type can be checked out to a patron of this category by entering the number of units (days or hours) in the ‘Loan period’ box.

• Define if the loan period should include closed days or not in the ‘Days mode’ column. The option chosen here will override the useDaysMode system preference for this particular rule.

  • The ‘Default’ option will take the option defined in the useDaysMode system preference

  • Choose the ‘Calendar’ option if you want to use the calendar to skip the days when the library is closed

  • Choose the ‘Datedue’ option if you want to push the due date to the next open day

  • Choose the ‘Days’ option if you want to ignore the calendar and calculate the due date directly

  • Choose the ‘Dayweek’ option if you want to use the calendar to push the due date to the next open matching weekday for weekly loan periods, or the next open day otherwise

• Choose which unit of time, days or hours, that the loan period and fines will be calculated in in the ‘Unit’ column

• You can also define a hard due date for a specific patron category and item type. The hard due date offers three options:

  • Exactly on: The due date of any item checked out with this rule will be set to the hard due date.

  • Before: Koha will calculate the normal loan period. If the calculated due date would be after or on the hard due date, the hard due date will be used instead.

  • After: Koha will calculate the normal loan period. If the calculated due date would be before the hard due date, the hard due date will be used instead.

• ‘Fine amount’ should have the amount you would like to charge for overdue items.

  Important

  Digite somente números e pontos decimais (não use simbolos de divisas).

• Enter the ‘Fine charging interval’ in the unit you set (ex. charge fines every 1 day, or every 2 hours). The finesCalendar system preference controls whether the days the library is closed will be taken into account or not.

• ‘When to charge’ is most handy in libraries that have a fine charging interval of more than 1 day.

  • End of interval: Given a grace period of 2 days and a fine interval of 7 days, the first fine will appear 7 days after the due date, it will always take one fine interval (7 days), before the first fine is charged.

  • Start of interval: Given a grace period of 2 days and a fine interval of 7 days, the first fine will appear 2 days after the due date and the second fine 7 days after the due date.

• The ‘Fine grace period’ is the period of time an item can be overdue before you start charging fines. The FinesIncludeGracePeriod system preference controls if the grace period will be included when calculating the fine or not.

  Important

  This can only be set for the ‘Day’ unit, not in ‘Hours’

• The ‘Overdue fines cap’ is the maximum fine per item for this patron and item type combination.

  Important

  If this field is left blank then Koha will not put a limit on the fines this item will accrue. A maximum fine amount for all overdues can be set using the MaxFine system preference.

• If you would like to prevent overcharging patrons for a lost items, you can check the box under ‘Cap fine at replacement price.’ This will prevent the patron’s fines from going above the replacement price on the item.

  Note

  If the ‘Overdue fines cap’ is also set, the fine will be the lesser of the two, if both apply to the given overdue checkout.

• If your library ‘fines’ patrons by suspending their account you can enter the number of days their fine should be suspended in the ‘Suspension in days’ field.

  Important

  This can only be set for the ‘Day’ unit, not in ‘Hours’

• Você pode definir o número máximo de dias que um usuário será suspenso no campo ‘Duração máxima da suspensão’

• The ‘Suspension charging interval’ option is just like the ‘Fin charging interval’. For example, you could ‘fine’ a patron one day suspension for every two days overdue.

• Next decide if the patron can renew this item type and if so, enter how many times they can renew it in the ‘Renewals allowed’ box.

• If you allow unseen renewals (see UnseenRenewals), enter how many ‘unseen’ renewals patrons can make. This is not in addition to the regular renewals, but rather how many ‘unseen’ renewals can be made among the total number of renewals.

• If you’re allowing renewals you can control how long the renewal loan period will be (in the units you have chosen) in the ‘Renewal period’ box.

• If you’re allowing renewals you can control how soon before the due date patrons can renew their materials with the ‘No renewals before’ box.

  • Exemplares podem ser renovados a qualquer tempo se este valor for deixado em branco. De outra forma, exemplares só poderão ser renovados caso tenham data de devolução superior a inserida na caixa (seja em dias ou horas).

  • To control this value on a more granular level please set the NoRenewalBeforePrecision preference.

• You can enable automatic renewals for certain items/patrons if you’d like. This will renew automatically following your circulation rules unless there is a hold on the item.

  Important

  You will need to enable the automatic renewal cron job for this to work.

  Important

  This feature needs to have the “no renewal before” column filled in or it will auto renew every day after the due date.

• If you are using automatic renewals, you can use the ‘No automatic renewals after’ to limit the time a patron can have the item. For example: don’t allow automatic renewals after a checkout period of 80 days.

• Similar to the hard due date setting, you can also stop automatic renewals after a specific date using the ‘No automatic renewal after (hard limit)’ setting.

• If patrons of this category can place holds on items of this type, enter the total numbers of items (of this type) that can be put on hold in the ‘Holds allowed’ field.

  • Leave empty to have unlimited holds.

  • If you’d rather put a hold limit per patron category, independent of the item type, see the default checkout and hold policy by patron category section below.

  • If you want to have a hard hold limit, independent of patron category and item type, for this particular library, see the Default checkout, hold, and return policy section below.

  • If you want to have a hard hold limit, independent of patron category, item type, and across all libraries, see the maxreserves system preference.

• You can also set a daily limit on the number of holds a patron can place.

• While the two settings before limit the holds that can be placed across various records, the next setting is used to limit the number of holds that can be placed on one record at the same time. For example, for fiction books you might want to allow only one item to be placed on hold at the same time by the same user. But for serials where items represent different issues more than one hold at the same time is fine.

• Next you can decide how the availability of items influences the ability to place a hold. The ‘On shelf holds allowed’ option has three settings:

  • Yes: This will allow to place holds on items at all times. It doesn’t matter if they are available or checked out.

  • If any unavailable: This will allow to place a hold as soon as one or more items of the record are checked out. It doesn’t matter if there are still one or more items available on the shelf.

  • If all unavailable: This will allow to place a hold as soon as all items on the record are checked out that could fill the hold. This is especially useful for libraries that don’t offer the service of getting items placed on hold off the shelf for patrons.

• Under ‘OPAC item level hold’ you can decide if patrons are allowed to place item specific holds on the item type in question. The options are:

  • Allow: Will allow patrons the option to choose next available or a specific item.

  • Don’t allow: Will only allow patrons to choose next available item.

  • Force: Will only allow patrons to choose a specific item.

• If you want to allow patrons of this category to be able to place article requests on items of this type, choose an option in the ‘Article requests’ column

  • No: patrons of this category will not be able to place article requests on items of this type

  • Yes: patrons of this category will be able to place article requests on items of this type, either on specific items (for example in the case of serial issues) or on entire records (for example in the case of monographs)

  • Record only: patrons of this category will be able to place article requests on records of this type, but not on specific items

  • Item only: patrons of this category will be able to place article requests on items of this type, but not on entire records

  Important

  If you want to use the article request functionality you need to enable it using the ArticleRequests system preference and configure the form using the other related preferences.

• If you charge a rental fee for the item type and want to give this specific patron category a discount on that fee, enter the percentage discount (without the % symbol) in the ‘Rental discount’ field

• If the UseRecalls system preference is enabled, you will have several options to control recalls.

  • Recalls allowed (total): enter the number of current recalls a patron of this category can have on items or records of this item type.

  • Recalls per record (count): enter the number of current recalls a patron of this category can have on any one record of this item type.

  • On shelf recalls allowed: choose if patrons can recall items on records that have available items

    • If any unavailable: if a record has more than one item and at least one is unavailable, the patron will be able to recall items from this record

    • If all unavailable: all items of a record must be unavailable in order for a patron to recall an item from this record

  • Recall due date interval (day): enter the number of days a patron has to return an item that has been recalled

  • Recall overdue fine amount: enter the fine amount a patron will be charged if they don’t return the recalled item by the due date

  • Recall pickup period: enter the number of days a patron has to come pick up the item they have recalled, once it has been marked as awaiting pickup.

    Nota

    This value supercedes the value in the RecallsMaxPickUpDelay system preference.

When finished, click ‘Save’ to save your changes. To modify a rule, simply click the ‘Edit’ button either at the beginning or at the end of the row. The row of the rule being edited will be highlighted in yellow and the values will appear filled in at the bottom of the table. Edit the values at the bottom and click save.

Note

If, while editing a rule, you change either the patron category or the item type, it will create a new rule. You can do this to duplicate rules instead of creating new ones if the values are similar.

Alternatively, you can create a rule with the same patron category and item type and it will edit the existing one, as there can only be one rule per library- patron category-item type combination.

If you would like to delete your rule, click the ‘Delete’ button at the beginning or at the end of the rule row.

To save time you can clone rules from one library to another by choosing the clone option above the rules matrix. Please note that this will overwrite all rules already configured for that library.

Depois de escolher você será presenteado com uma mensagem de confirmação.

Default checkout, hold, and return policy

You can set a default maximum number of checkouts, a default maximum number of holds and a hold policy that will be used if none is defined below for a particular item type or category. This is the fall back rule for defaults.

From this menu you can set a default to apply to all item types and patrons in the library if no other option is set in the forms below.

• In ‘Total current checkouts allowed’ enter the total number of items patrons can have checked out at one time

• In ‘Total current on-site checkouts allowed’ enter the total number of items patrons can have checked out on site at a time (OnSiteCheckouts needs to be set to ‘Enable’)

• In ‘Maximum total holds allowed (count)’ enter the total number of pending holds patrons can have at the same time.

• Controla onde os usuários podem reservar usando o menu ‘Política de reserva’

  • De qualquer biblioteca: Usuários de qualquer biblioteca podem reservar exemplares. (padrão se nada estiver definido)

  • From Local Hold Group: Only patrons from a library in the item home library’s local hold group may put this book on hold.

  • Da biblioteca de origem: Apenas usuários da biblioteca de origem do exemplar podem podem fazer reservas.

  • Reservas não permitidas: Nenhum usuário pode reservar este livro.

• Control where patron can pick up holds using the “Hold Pickup Library Match” menu

  • any library

  • item’s hold group

  • patron’s hold group

  • item’s home library

  • item’s holding library

• Control where the item returns to once it is checked in

  • Item retorna a origem

  • Item retorna a biblioteca

  • Itens extraviados

    • Quando um item for extraviado ele permanece onde foi emprestado e não voltar nunca ‘origem’

• Uma vez que sua política é definida, você pode desativa-la clicando no link “Desativar” à direita.

Default checkout and hold policy by patron category

For this library, you can specify the maximum number of checkouts, on-site checkouts and holds that a patron of a given category can have, regardless of the item type.

Note

If the total amount of checkouts, on-site checkout and holds for a given patron category is left blank, no limit applies, except possibly for a limit you define in the circulation rules above.

Por exemplo, se você possui uma regra que diz que em uma determinada categoria de usuários são permitidos 10 livros e 5 DVDs, mas você deseja que estes usuários só possam fazer um empréstimo de 12 itens, no total, ao mesmo tempo. Se você digitar 12, no campo ‘Total de empréstimos permitidos’, e este usuário já tem 10 livros emprestados, só serão permitidos 2 DVDs para igualar o total de 12.

Default open article requests limit

If ArticleRequests is enabled, you can set a maximum number of open article requests a patron of a category can have at one time.

Nota

This will only appear if the ArticleRequests system preference is enabled.

• Choose the patron category you want to limit.

• Enter the number of open article requests a patron of this category can have at one given time

• Click ‘Add’

Default article request fees

If ArticleRequests is enabled, you can set the fee a patron from a given category (or any category) needs to pay in order to request the article.

Nota

This will only appear if the ArticleRequests system preference is enabled.

• Choose the patron category for which you want to add a fee, or choose ‘All’ to set an overall fee for all patrons

  Nota

  The fee specific to a patron category will supercede the fee for all categories.

  For example, if you set a fee for all categories to 2$ and a fee for Faculty to 3$, Faculty members will be charged 3$ and any other patron will be charged 2$.

• Enter the fee amount (use a period as the decimal and don’t enter any symbols, e.g. enter 5.00 for 5$)

• Click ‘Add’

The fee is charged to the patron when the request is placed.

When placing the request, either through the staff interface or the OPAC, a message appears to inform the staff member or the patron that the patron will be charged for every request and the amount of the fee.

Default lost item fee refund on return policy

Here, you can specify the default policy for lost item fees on return. This policy will apply to this library. This rule is to be used with the RefundLostOnReturnControl system preference.

You can limit the number of days during which a lost item is refundable using the NoRefundOnLostReturnedItemsAge system preference.

Default holds policy by item type

For this library, you can edit hold and return policies for a given item type, regardless of the patron’s category.

The various hold policies have the following effects:

• From any library: Patrons from any library may put this item on hold. (default if none is defined)

• From local hold group: Only patrons from libraries in the same item’s home library hold groups may put this book on hold.

• From home library: Only patrons from the item’s home library may put this book on hold.

• No holds allowed: No patron may put this book on hold.

  Important

  Note that if the system preference AllowHoldPolicyOverride set to ‘allow’, these policies can be overridden by your circulation staff.

  Important

  These policies are applied based on the ReservesControlBranch system preference.

Control where patron can pick up holds using the “Hold Pickup Library Match” menu

• any library

• item’s hold group

• patron’ hold group

• item’s home library

• item’s holding library

The various return policies have the following effects:

• Item returns home: The item will prompt the librarian to transfer the item to its home library

  • Important

    If the AutomaticItemReturn preference is set to automatically transfer the items home, then a prompt will not appear

• Item returns to issuing branch: The item will prompt the librarian to transfer the item back to the library where it was checked out

  • Important

    If the AutomaticItemReturn preference is set to automatically transfer the items home, then a prompt will not appear

• Itens extraviados: O item não poderá ser transferido de outra ramal se tiver emprestado, enquanto ele não foi devolvido ou transferido manualmente

Por exemplo, você poderá permitir reservas em suas bibliotecas, mas não que os novos itens ou DVDs possam ser reservados por outras bibliotecas, para isso você deve definir a ‘Política de reserva’ para ‘Da biblioteca de origem’, desta forma esses itens só poderão ser reservados se a biblioteca dos itens e biblioteca de origem do usuário forem as mesmas. Você também pode bloquear completamente reservas em itens específicos deste formulário. Está é a forma como você pode configurar se itens extraviados e outros tipos de itens devem permanecer nas suas bibliotecas de origens.

Patron attribute types

• Get there: More > Administration > Patrons and circulation > Patron attribute types

Patron attributes can be used to define custom fields to associate with your patron records. In order to enable the use of custom fields you need to set the ExtendedPatronAttributes system preference.

Um uso comum para este campo seria para a idenficação do estudante ou para o número da carteira de motorista.

Adding patron attribute types

To add a new patron attribute type, click the ‘New patron attribute type’ button at the top of the page

• Patron attribute type code: enter a short code to identify this field

  Aviso

  Este campo é limitado a 10 caracteres (apenas números e letras)

  Aviso

  A configuração não pode ser alterada após um atributo ser definido

• Description: enter a longer (plain text) explanation of what this field will contain

• Repeatable: check this box if a patron record can have multiple values of this attribute.

  Aviso

  A configuração não pode ser alterada após um atributo ser definido

• Unique identifier: check this box if a value is given to a patron record, the same value cannot be given to a different record.

  • Unique attributes can be used as match points on the patron import tool

  Aviso

  A configuração não pode ser alterada após um atributo ser definido

• Display in OPAC: check this box to display this attribute on a patron’s details page in the OPAC.

• Editable in OPAC: check this box to enable patrons to edit this information in the OPAC.

• Searchable: check this box to make this attribute searchable in the staff interface’s patron search.

• Mandatory: check this box if the attribute must be filled for every patron

• Display in patron’s brief information: check this box to make this attribute visible in the patron’s short detail display on the left of the checkout screen and other patron pages

  

• Authorized value category: if one is selected, the patron record input page will only allow values to be chosen from the authorized value list.

  • You will first need to add an authorized value list for it to appear in this menu

  Aviso

  An authorized value list is not enforced during batch patron import.

• Library limitations: if you would like this attribute to only be used by specific branches you can choose those branches from this list. Choose ‘All branches’ to show it for all libraries.

  Aviso

  Patrons with attributes already set for them will not be altered. The branch limitation only limits the field based on the library at which the current staff is logged in.

  If an attribute is set for a patron, it will be displayed in their file to all staff. However, only staff from the selected branches will be able to edit it.

• Category: if you’d like to only show this attribute on patrons of one type choose that patron category here

• Class: if you have a lot of attributes it might be handy to group them so that you can easily find them for editing. If you create an authorized value for PA_CLASS it will show in the ‘Class’ drop-down menu and you can then change your attributes page to have sections of attributes

  

Click ‘Save’ to save your new attribute.

Once added, your attribute will appear on the list of attributes and also on the patron record add/edit form

Editing/deleting patron attribute types

Each patron attribute has an edit and a delete button beside it on the list of attributes.

Alguns campos no atributo não serão editáveis após criados:

• Código de tipo de atributo de usuário

• Repetítivel

• Identificador único

Você não será capaz de excluir um atributo se ele não estiver em uso.

Library transfer limits

Limitar a transferência de exemplares entre bibliotecas com base na biblioteca que envia, biblioteca que recebe e o código da coleção do material.

• Get there: More > Administration > Patrons and circulation > Library transfer limits

These rules only go into effect if the preference UseBranchTransferLimits is set to ‘enforce’.

Antes de começar, você precisa selecionar a biblioteca para a qual você está definindo os limites de transferência.

Transfer limits are set based on the collections codes you have applied via the Authorized values administration area.

Collection codes will appear as tabs above the checkboxes:

Check the boxes for the libraries you allow your items to be transferred to for the collection code you have selected at the top (in the example below - FIC)

In the above example, Centerville library will allow patrons from all libraries except Liberty and Franklin to request items from their branch.

Matriz de custo de transporte

The transport cost matrix lets a library system define relative costs to transport books to one another. In order for the system to use this matrix you must first set the UseTransportCostMatrix preference to ‘Use’.

Important

The transport cost matrix takes precedence in controlling where holds are filled from, if the matrix is not used then Koha checks the StaticHoldsQueueWeight.

Custos são valores decimais entre algum valor máximo arbitrário (ex. 1 ou 100) e 0 que é o menor (ou nenhum) custo. Por exemplo, você pode simplesmente utilizar a distância entre cada biblioteca em quilometros como seu ‘custo’, se isto refletir diretamente no custo de transferência. Às vezes as agências de correio podem ser uma medida mais apropriada. Bibliotecas que compartilham uma agência dos correios poderiam ter um custo 1, agências de correio adjacentes teriam um custo 2 etc.

Para adicionar custos com transporte, clique na célula que você deseja alterar, tire a seleção da caixa ‘Desativar’ e insira seu ‘custo’

Após informar o custo, pressione ‘Enter’ e clique em ‘Salvar’ no final da matriz para salvar suas alterações.

Note

A NULL value will make no difference where the From and To libraries are the same library. However, as a best practice, you should put a 0 in there. For all other To/From combinations, a NULL value will cause that relationship to act as if it has been disabled. So, in summary, don’t leave any of the values empty. It’s best to always put a number in there ( even if you choose to disable that given To/From option ).

Item circulation alerts

As bibliotecas podem decidir se querem que os usuários sejam informados automaticamente sobre a circulação de materiais (devoluções e empréstimos).

• Get there: More > Administration > Patrons and circulation > Item circulation alerts

Estas preferências são configuradas com base no tipo de usuários e materiais.

Important

These preference can be overridden by changes in the individual patron’s messaging preferences.

Para configurar alertas de circulação:

• Choose your library from the pull down at the top of the screen

  

  • Para configurar preferências para todas as bibliotecas, deixa o menu configurado para ‘Padrão’

• Por padrão, todos os usuários são notificados sobre empréstimos e devoluções. Para alterar isso, clique no tipo de usuário que você deseja que pare de receber avisos.

  

  • In the above example, Juveniles and Kids will not receive check out notices.

Cities and towns

Para padronizar uma entrada de usuário você pode definir uma lista com as cidades da região, o que permite que novos usuários tenham suas informações de endereço adicionadas sem que o funcionário tenha que digitá-las.

• Get there: More > Administration > Patrons and circulation > Cities and towns

Adding a city

To add a new city, click the ‘New city’ button at the top of the page and enter the city name, state, zip/postal code and country.

One you click Submit, your city will be saved and will be listed on the Cities and towns page

Cidades podem ser editadas ou excluidas em qualquer momento.

Viewing cities on patron add form

If you have defined local cities using the ‘New city’ form, then when adding or editing a patron record you will see those cities in a pull down menu to make city selection easy.

Isto irá permitir a inserção de cidades no registro de usuário sem o risco de erros de localização.

Curbside pickup

The curbside pickup feature is used to set up appointments with patrons for them to pick up their holds. This section is used to configure the pickup windows

• Get there: More > Administration > Patrons and circulation > Curbside pickup

Nota

In order to use this module, you must enable it with the CurbsidePickup system preference.

Setting up curbside pickup

• From the configuration page, click the tab corresponding to the library for which you’re setting up curbside pickup

  

• Fill out the form

  • Enable: check this box to enable curbside pickup at this library

  • Pickup interval: enter the number of minutes each curbside pickup interaction will take

  • Maximum patrons per interval: enter the number of patrons who can pickup in the same interval

  • Patron-scheduled pickup: check this box if you want to allow patrons to set up their own curbside pickup appointment through the OPAC

  • Enable for waiting holds only: check this box if curbside pickup should be limited to patrons who have holds awaiting pickup

• Create curbside pickup slots

  • For each slot, enter the day of the week, the starting and ending hours of the time slot in which patrons can come

    • these can be your opening hours, if you allow curbside pickup throughout the day, or specific time slots in which you allow patrons to come by

    • For the hours, the format must be XX:XX (numbers with a colon) and it must be in 24-hour format (e.g. 1 PM is 13:00)

  • Click ‘Add’

• Click ‘Save configuration’

Do this for every library that offers curbside pickup.

Patron restrictions

If you are using patron restrictions, you can manage the restriction types available from here.

• Get there: More > Administration > Patrons and circulation > Patron restrictions

Adding a restriction type

To add a new restriction type, click the ‘New restriction’ button at the top of the page and enter the new code and a corresponding label.

Once you click Save, your restriction will be saved and will be listed in the table of restriction types.

Locally created restriction types can be set to set as the default restriction type to use when manually adding a restriction to a patron account. This can be achieved using the ‘Make default’ button.

You can also delete any locally created restriction types using the ‘Delete’ so long as they have not be assigned as the default.

Accounting

• Get there: More > Administration > Accounting

This section deals with the parameters used in managing the patron accounts.

Debit types

• Get there: More > Administration > Accounting > Debit types

This is where you define the manual fees you can charge patrons.

When you first get to the page, you will only see the manual fees that are already defined in your system.

You can see the default system fees by clicking “Show all debit types”.

You can go back to seeing only the manual fees by clicking “Filter system debit types”.

System debit types

Several debit types come installed with Koha. Most of them are automatic fees that are added according to the policies you set up elsewhere in Koha.

• ACCOUNT (Account creation fee): this is charged to the patron’s account upon registration. The fee can be changed in the patron category settings under ‘Enrollment fee’.

• ACCOUNT_RENEW (Account renewal fee): this is charged to the patron’s account when their account is renewed. Like the ACCOUNT debit type above, this can be changed in the patron category settings under ‘Enrollment fee’.

• LOST (Lost item): this is charged to the patron’s account when an item in their file is declared lost. The amount depends on the item’s ‘replacement cost’ field or on the item type’s default replacement cost. It can also be added manually in the manual invoices tab.

• MANUAL (Manual fee): this is the default manual fee installed with Koha. This is not charged automatically by Koha, but can be added to a patron’s account manually in the manual invoices tab.

• NEW_CARD (New card fee): this is another default manual fee installed with Koha. This will not be charged automatically by Koha, but can be added to a patron’s account manually in the manual invoices tab.

• OVERDUE (Overdue fine): this is charged automatically to the patron’s account when they have overdue items. The amount for overdue fines are set in the circulation and fines rules.

• PAYOUT (Payment from library to patron): this is used when the library reimburses the patron (for an over payment for example).

• PROCESSING (Lost item processing fee): this is charged automatically to the patron’s account when an item in their file is declared lost. The amount is set by item type under ‘Processing fee (when lost)’.

• RENT (Rental fee): this is charged automatically to the patron’s account upon checkout if the item type has a rental charge.

• RENT_DAILY (Daily rental fee): this is charged automatically to the patron’s account upon checkout if the item type has a daily rental charge.

• RENT_DAILY_RENEW (Renewal of daily rental item): this is charged automatically to the patron’s account upon renewal if the item type has a daily rental charge.

• RENT_RENEW (Renewal of rental item): this is charged automatically to the patron’s account upon renewal if the item type has a rental charge.

• RESERVE (Hold fee): this is charged automatically to the patron’s account upon placing a hold. The amount depends on the ‘Hold fee’ amount in the patron’s category settings.

• RESERVE_EXPIRED (Hold waiting too long): this is charged automatically to the patron’s account if they haven’t picked up their hold after the number of days defined in the ExpireReservesMaxPickUpDelay system preference. The amount is set in the ExpireReservesMaxPickUpDelayCharge system preference.

Adding a new debit type

To add a new debit type:

• Click ‘New debit type’

  

  • Enter a code (limited to 64 letters)

  • Enter the default amount

    Note

    Staff will be able to change this amount when adding the charge to the patron’s account, if necessary

    Note

    Do not enter currency symbols. Only write the amount with a decimal point (for example, 5 or 5.00 instead of $5)

  • Write a description

    This description will be used in the drop-down menu when adding a new charge to a patron’s account as well as in their transaction history

  • If this debit type can be added manually by staff to a patron’s account via the manual invoices, check the ‘Can be added manually?’ check box

  • If this debit type is only to be used in specific branches, you can select the libraries in ‘Libraries limitation’

    Note

    You can select more than one library by pressing the ‘Ctrl’ key while selecting.

  • Clique ‘Salvar’

Editing an existing debit type

You can only modify the debit types you have added, as well as the ‘Manual fee’.

To edit a debit type:

• Click the ‘Edit’ button to the right of the debit type

• Modify any field

• Clique ‘Salvar’

Archiving a debit type

If there is a debit type you don’t need anymore, you can archive it.

Note

There is no way to delete a debit type since they are used in the patron’s accounting section.

To archive a debit type, simply click the ‘Archive’ button to the right of the debit type.

Restoring an archived debit type

If you need to use an archived debit type again, simply click on the ‘Restore’ button to the right of the debit type.

This will make it available again.

Credit types

• Get there: More > Administration > Accounting > Credit types

This is where you define the manual credits you can give patrons.

When you first get to the page, you will only see the credits that are already defined in your system.

You can see the default system credit types by clicking “Show all credit types”.

You can go back to seeing only the manual credit types by clicking “Filter system credit types”.

System credit types

Several credit types come installed with Koha. Most of them are automatic credits that are added according to the policies you set up elsewhere in Koha. They can not be deleted.

• CANCELLATION (Canceled charge): this is used when cancelling a charge in a patron’s account

• CREDIT (Credit): this is used for manual credits to give to your patrons.

• DISCOUNT (A discount applied to a patrons fine): this is used to discount fines and charges.

• FORGIVEN (Forgiven): this is used for manual credits to give to your patrons.

• LOST_FOUND (Lost item fee refund): this is used when a previously lost item is returned. If you refund the lost fees (see Default lost item fee refund on return policy), this credit will be applied to refund the fee.

• OVERPAYMENT (Over payment refund): this is automatically applied to a patron’s account when they paid too much for a fee. This is mostly used when backdating check-ins where the patron has already paid the full fine.

• PAYMENT (Payment): as the name states, this is used to indicate fee payments.

• PURCHASE (Purchase): this is used when a payment is made through the point of sale module.

• REFUND (A refund applied to a patrons fine): this is used when refunding the payment of a fine or charge.

• WRITEOFF (Writeoff): this is used when writing off a fine or charge.

Adding a new credit type

To add a new credit type:

• Click ‘New credit type’

  

  • Enter a code (limited to 64 letters)

  • Write a description

    This description will be used in the drop-down menu when adding a new credit to a patron’s account as well as in their transaction history

  • If this credit type can be added manually by staff to a patron’s account via the manual credit, check the ‘Can be added manually?’ check box

  • If you need this credit type to be sequentially numbered, check the ‘Enable credit number’. The format of the number is defined in the AutoCreditNumber system preference.

  • If this credit type is only to be used in specific branches, you can select the libraries in ‘Libraries limitation’

    Note

    You can select more than one library by pressing the ‘Ctrl’ key while selecting.

  • Clique ‘Salvar’

Editing an existing credit type

You can only modify the credit types you have added.

To edit a credit type:

• Click the ‘Edit’ button to the right of the credit type

• Modify any field

• Clique ‘Salvar’

Archiving a credit type

If there is a credit type you don’t need anymore, you can archive it.

Note

There is no way to delete a credit type since they are used in the patron’s accounting section.

To archive a credit type, simply click the ‘Archive’ button to the right of the credit type.

Restoring an archived credit type

If you need to use an archived credit type again, simply click on the ‘Restore’ button to the right of the credit type.

This will make it available again.

Cash registers

• Get there: More > Administration > Accounting > Cash registers

This feature is enabled through the UseCashRegisters system preference.

If you have no cash registers already defined, you will be invited to create one.

Otherwise, you will see the list of all your cash registers.

In the ‘Actions’ columns, you can choose to edit your cash registers, make one of them default or remove the default status, and archive or restore an archived register.

The default status is only useful in libraries that have more than one register per branch. The default register will be pre-selected when entering a payment. If there is only one cash register per branch, the branch’s cash register will be selected when paying.

Adding a new cash register

• Click on ‘New cash register’

  

• Give your cash register a name

• Optionally you can also add a description

• Choose in which library this cash register is located

• And finally, enter the initial float, i.e. the amount in the cash register

• Click ‘Add’

Catalog administration

Set these controls before you start cataloging on your Koha system.

• Get there: More > Administration > Catalog

MARC bibliographic frameworks

Think of frameworks as templates for creating new bibliographic records. Koha comes with some predefined frameworks that can be edited or deleted, and librarians can create their own frameworks for content specific to their libraries.

• Get there: More > Administration > Catalog > MARC bibliographic frameworks

Important

Do not delete or edit the Default framework since this will cause problems with your cataloging records - always create a new template based on the Default framework, or alter the other frameworks.

Add new framework

Para adicionar uma nova planilha

• Click ‘New framework’

  

  • Digite um código de 4 ou menos caracteres

  • Use o campo de descrição para inserir uma definição mais detalhada da sua planilha

• Clique ‘Enviar’

• Once your framework is added click Actions then ‘MARC structure’ to the right of it on the list of frameworks

  

  • You will be asked to choose a framework to base your new framework on, this will make it easier than starting from scratch

• Once your framework appears on the screen you can edit or delete each field by following the instructions for editing fields and subfields

Edit existing frameworks

Clicking Actions and then ‘Edit’ to the right of a framework will only allow you to edit the description for the framework:

Edit framework fields and subfields

Frameworks are made up of MARC fields (tags) and subfields. To make edits to the fields and subfields associated with the framework you must click on ‘Actions’ and then ‘MARC structure’.

Edit a MARC field (tag)

After clicking on ‘MARC structure’ you will be taken to a screen listing all the available tags for that framework and you can search for the tag you need. To make edits to a MARC field click on ‘Actions’ on the right of the field then ‘Edit tag’.

The next screen shows details of the tag.

• Each field has a tag (which is the MARC tag) that is uneditable

• The ‘Label for lib’ is what will show in the staff interface if you have advancedMARCeditor set to display labels

• O ‘Texto para OPAC’ é o que será exibido na visualização MARC no OPAC

• If you check ‘Repeatable’ then the field will have an icon next to it allowing you to add multiples of that tag

• If you check ‘Mandatory’ the record cannot be saved unless the field has a value. A ‘Required’ flag will display as a prompt

• If you check ‘Important’, the field will generate a warning if it is not filled, but unlike ‘Mandatory’, you will still be able to save your record nonetheless

• If you add default values for indicators here these will be pre-filled to save time when cataloging but can still be edited if required

• ‘Authorized value’ is where you define an authorized value pull down list for your catalogers

  Note

  The authorized value option at field level does not work.

Edit a MARC subfield

To edit the subfields associated with the tag, click ‘Actions’ then ‘Edit subfields’ to the right of the tag on the framework field list. Each subfield has its own tab which contains three sections - Basic constraints, Advanced constraints and Other options.

• For each subfield you can set the following basic constraint options

  

  • Subfield code: this is the MARC subfield code, this wouldn’t normally be changed

  • Text for librarian: what appears before the subfield in the staff interface

  • Text for OPAC: what appears before the field in the OPAC

    • Se ficar em branco, o texto para funcionário será usado no lugar

  • Repeatable: the field will have an icon next to it allowing you to add multiples of the subfield

  • Mandatory: the record cannot be saved unless you have a value assigned to this subfield. A ‘Required’ flag will display as a prompt

  • Important: this indicates that a field is not mandatory, but important. If you try to save a record where an important field is empty, you will get a warning, but the record will still be saved.

  • Managed in tab: defines the tab where the subfield is shown.

    Important

    All subfields of a given field must be in the same tab or ignored. Ignore means that the subfield is not managed.

    Important

    When importing records, subfields that are managed in tab ‘ignore’ will be deleted. If you still wish to keep the subfields, but hide them, use the ‘Visibility’ options below.

• For each subfield you can set the following advanced constraint options

  • Default value: defines what you want to appear in the field by default, this will be editable, but it saves time if you use the same text over and over or the same value in a field often.

    Note

    There are several values that you can use here that will be replaced automatically when a new record is created:

    • <<MM>> - the current month, 2 digits

    • <<DD>> - the current day of month, 2 digits

    • <<YYYY>> - the current year, 4 digits

    • <<USER>> - the username of the currently logged in user

    For example: a default of “<<MM>>/<<DD>>/<<YYYY>>” (without quotes) will print the current date in the form of “01/21/2021”

  • Visibility: allows you to select from where this subfield is visible/hidden, simply check the boxes where you would like the field to show and uncheck the boxes where you would like it hidden.

    Note

    The Editor checkbox controls whether this subfield will display within cataloging editor for this framework. If you check Collapsed the subfield will be hidden in the editor but will be displayed if the field label is clicked to expand all subfields

    

  • Is a URL: if checked, it means that the subfield is a URL and can be clicked

  • Link: if you enter an index name here, a link appears after the subfield in the MARC detail view in the staff interface. If the librarian clicks on the link, a catalog search is done using the index and the content of the subfield.

  • Koha link: this field is used to create a link between the MARC subfield and a column in the items, biblioitems and biblio database tables. Whenever a record is added or changed, this mapping will be used to update the linked database column. The information from the database columns is used as a way to quickly look up important information without having to parse the full MARC record. It is used for displaying information in a lot of pages and can also be used in reports.

    It is possible to map multiple MARC subfields to the same database column. The first existing mapped subfield will be saved into the database. Usage example: For a MARC21 installation with both RDA and AACR2 records where some records store the publication data in 260 and others in 264 both fields can be mapped to the database columns for publisher, publication date and publication year.

    The mappings can be changed on this page or from the Koha to MARC mapping page.

    Warning

    The Koha links should not be changed after data has been added to your catalog. If you need to change or improve them, you must ask your system administrator to run misc/batchRebuildBiblioTables.pl. This will update the values in the database columns for all your records.

• For each subfield you can set the following Other option values

  • Authorized value: means the value cannot by typed, but must be chosen from a pull down generated by the authorized value list

    In the example above, the 504a field will show the MARC504 authorized values when cataloging

    

  • Thesaurus: means that the value is not free text, but must be searched in the authority/thesaurus of the selected category

  • Plugin: means the value is calculated or managed by a cataloguing plugin Cataloguing plugins, or value builders, can do almost anything.

    • Exemplos:

      • For call numbers there is an option to add a call number browser next to the the call number subfield so that you can identify which call numbers are in use and which are not. Simply choose the cn_browser.pl plugin. Learn more in the cataloging section of this manual.

      • If you’d like to let file uploads via cataloging you can choose the upload.pl plugin and this will allow you to upload files to Koha to link to your records.

      • In UNIMARC there are plugins for every 1xx fields that are coded fields. The plugin is a huge help for cataloger! There are also two plugins (unimarc_plugin_210c and unimarc_plugin_225a that can “magically” find the editor from an ISBN, and the collection list for the editor)

      • If you would like to enable an autocomplete search for publishers in 260b and 264b you can set the plugin to marc21_field_260b.pl. When you start typing in a publisher name you will be given search results based on publisher names already in the catalog.

• To save your changes simply click the ‘Save changes’.

Add fields to frameworks

If a framework doesn’t contain a field that you require you may need to add it. To add a field to a framework click the ‘New tag’ button at the top of the framework definition

Isto irá exibir um formulário em branco para entrar com os dados do campo MARC

Digite a informação sobre sua nova tag:

• A ‘Tag’ é o número do campo MARC

• The ‘Label for lib’ is the text that will appear in the staff interface when in the cataloging module

• O ‘Texto para OPAC’ é o texto que irá aparecer no OPAC quando for visualizada a versão MARC do registro

• Se este campo pode ser repetitível, marque a caixa ‘Repetitível’

• Se este campo é obrigatório, marque a caixa ‘Obrigatório’

• If this field is not mandatory but is important, check the ‘Important’ box

  • If the important field is not filled upon saving the record, there will be a warning, but the user will still be able to save the record

• You can enter default values for indicators in the ‘First indicator default value’ and ‘Second indicator default value’ field

• Se você quiser que este campo tenha uma lista de seleção com as possíveis respostas, escolha uma lista de ‘Valores Autorizados’ que você deseja utilizar

  Note

  The authorized value option at field level does not work.

When you’re finished, click ‘Save changes’ and your new tag will be displayed in the framework field list.

You will need to add at least one subfield to your new tag before it will appear in your framework when you are cataloging.

Click on the ‘Actions’ button for your new tag and then ‘Edit subfields’. Click on the ‘New’ tab and enter your subfield code. The process for entering the remainder of the settings for the new subfield is the same as those found in the editing fields and subfields in frameworks section of this manual.

Import/export frameworks

Ao lado de cada quadro é um link para importar ou exportar qualquer quadro.

Export framework

Para remover uma tag de um título em específico, simplesmente clique no botão ‘Remover tag’ à direita do título.

Quando você clica em ‘Exportar’ Você será solicitado a escolher o tamanho para exportar o arquivo em.

Um quadro exportado desta forma podem ser importados para qualquer outra instalação Koha usando a opção de quadro de importação.

Import framework

An easy way to create a new framework is to import one created for your or another Koha installation. This framework would need to be exported from the other system using the instructions above to be available for import here.

To import a framework you first need to create a new framework. Once you have that framework, click Actions then ‘Import’ to the right of the new framework.

Você será solicitado para encontrar um arquivo que você importar para o seu computador para o quadro.

Você será solicitado a confirmar sua ação antes que o arquivo é importado.

Quando o arquivo for carregado, surgirá uma mensagem de confirmação.

Once your import is complete you will be brought to the framework edit tool where you can make any changes you need to the framework you imported.

Koha to MARC mapping

While Koha stores the entire MARC record, it also stores common fields for easy access in various tables in the database. Koha to MARC mapping is used to tell Koha where to find these values in the MARC record. In many cases you will not have to change the default values set by in this tool on installation, but it is important to know that the tool is here and can be used at any time.

• Get there: More > Administration > Catalog > Koha to MARC mapping

The table shows all the database fields that can be mapped to MARC fields.

To add a new mapping, click on the ‘Add’ button to the right of the appropriate field.

Write in the MARC field and subfield you would like to map, separated by a comma, to this Koha field and click the ‘OK’ button.

Note

It is possible to link more than one MARC field to a database field. For example, you could link both 260$a and 264$a to the biblioitems.place field.

If you would like to clear the mapping for a database field, click the ‘Remove’ button.

Note

All changes are immediate.

MARC bibliographic framework test

Checks the MARC structure.

• Get there: More > Administration > Catalog > MARC bibliographic framework test

If you change your MARC bibliographic framework it’s recommended that you run this tool to test for errors in your definition.

Authority types

Authority types are basically MARC frameworks for authority records and because of that they follow the same editing rules found in the MARC bibliographic frameworks section of this manual. Koha comes with many of the necessary authority frameworks already installed. To learn how to add and edit authority types, simply review the MARC bibliographic frameworks section of this manual.

• Get there: More > Administration > Catalog > Authority types

Classification sources

Source of classification or shelving scheme are mapped to field 952$2 and 942$2 in Koha’s MARC bibliographic frameworks and stored in the items.cn_source and biblioitems.cn_source fields in the database.

• Get there: More > Administration > Catalog > Classification sources

Commonly used classification sources are:

• cdd - Classificação Decimal de Dewey

• lcc - Classificação da Library of Congress

Se você optar por instalar fontes de classificação durante a instalação do Koha, você poderá ver outros valores também:

• ANSCR (gravações de áudio)

• Classificação SuDOC

• Classificação Decimal Universal

• Outra/Classificação genérica

Adding/editing classification sources

You can add your own source of classification by using the ‘New classification source’ button. To edit use the ‘Edit’ button.

Quando estiver criando ou editando:

• Enter a code. The code is limited to 10 characters and must be unique.

Nota

The code is not editable once it has been created.

• Enter a description. The description is used in the drop-down lists in the cataloging module.

• Check the ‘Source in use?’ checkbox if you want the value to appear in the drop-down list for this category.

• Select the appropriate filing rule from the drop-down list.

• Select the appropriate splitting rule from the drop-down list.

Classification filing rules

Filing rules determine the order in which items are placed on shelves. Filing rules normalize call numbers in order for Koha to be able to compare them and sort them in the right order.

For example, a Dewey call number such as ‘636.8/07 SHAW’ will become ‘636_800000000000000_07_SHAW’ in order to be sorted.

The sorted call number is saved in the items.cn_sort or biblioitems.cn_sort fields in the database

Os valores pré-configurados no Koha são:

• Dewey

• LCC

• Genérico

Filing rules are mapped to Classification sources. You can setup new filing rules by using the ‘New filing rule’ button. To edit, use the ‘Edit’ button.

Quando estiver criando ou editando:

• Enter a code. The code is limited to 10 characters and must be unique.

Nota

The code is not editable once it has been created.

• Enter a description. The description is used in the drop-down list when creating or editing a classification source.

• Defina uma rotina de preenchimento apropriada - Dewey, genérica ou LCC

  • The Dewey filing routine generates a sorted call number by following these rules:

    • Concatenates classification and item parts.

    • Converts to uppercase.

    • Removes any leading or trailing white spaces, and forward slashes (/)

    • Separates alphabetic prefix from the rest of the call number

    • Splits into tokens on white spaces and periods.

    • Leaves first digit group as is.

    • Converts second digit group to 15-digit long group, padded on right with zeroes.

    • Converts each whitespace to an underscore.

    • Removes any remaining non-alphabetical, non-numeric, non-underscore characters.

  • The generic filing routine generates a sorted call number by following these rules:

    • Concatenates classification and item parts.

    • Removes any leading or trailing white spaces.

    • Converts each whitespace to an underscore.

    • Converts to uppercase.

    • Removes non-alphabetical, non-numeric, non-underscore characters.

  • The LCC filing routine generates a sorted call number by following these rules:

Classification splitting rules

Splitting rules determine how call numbers are split when printed on a spine label.

Nota

Splitting rules are only used if your label layout specifies to split call numbers.

For example, a Dewey call number such as ‘636.8/07 SHAW’ will become

636.807
SHAW

once printed on a spine label.

Os valores pré-configurados no Koha são:

• Dewey

• LCC

• Genérico

Splitting rules are mapped to Classification sources. You can setup new splitting rules by using the ‘New splitting rule’ button. To edit, use the ‘Edit’ button.

Quando estiver criando ou editando:

• Enter a code. The code is limited to 10 characters and must be unique.

Nota

The code is not editable once it has been created.

• Enter a description. The description is used in the drop-down list when creating or editing a classification source.

• Choose an appropriate splitting routine - Dewey, Generic, LCC or RegEx

  • The Dewey splitting routine looks for the three digits and the decimal, puts it on one line with the other parts (Cutter, prefix, etc.) each on a separate line (generally split on spaces).

  • The Generic splitting routine splits on spaces.

  • The LCC splitting routine puts each component on a separate line.

  • The RegEx splitting routine allows you to create a custom splitting routine.

    • Some examples of RegEx splitting routines:

      • Split on spaces:

        s/\s/\n/g
        

      • Split on equal signs (=):

        s/(\s?=)/\n=/g
        

      • Split on forward slashes (/):

        s/(\s?\/)/\n/g
        

      • Remove first split if call number starts with J or K:

        s/^(J|K)\n/$1 /
        

      • Cut after 9 characters:

        s/(^.{9})/$1\n/
        

It is possible to mix and match RegEx splitting routines by clicking the ‘New’ link just under the RegEx input box.

For example, if you want to cut after nine characters AND split on spaces, you can write both and the call number ‘971.42805092 C669r’ will be split

971.42805
092
C669r

Record matching rules

Regras de correspondência de registros são utilizadas no momento da importação de dados no Koha.

• Get there: More > Administration > Catalog > Record matching rules

The rules that you set up here will be referenced with you Stage MARC records for import.

It is important to understand the difference between ‘Match points’ and ‘Match checks’ before adding new matching rules to Koha.

Match points are the criteria that you enter that must be met in order for an incoming record to match an existing MARC record in your catalog. You can have multiple match points on an import rule each with its own score. An incoming record will be compared against your existing records (‘one record at a time’) and given a score for each match point. When the total score of the match points matches or exceeds the threshold given for the matching rule, Koha assumes a good match and imports/overlays according your specifications in the import process. An area to watch out for here is the sum of the match points. Double check that the matches you want will add up to a successful match.

Example:

Threshold of 1000

Match point on 020$a 1000

Match point on 022$a 1000

Match point on 245$a 500

Match point on 100$a 100

In the example above, a match on either the 020$a or the 022$a will result in a successful match. A match on 245$a title and 100$a author (and not on 020$a or 022$a) will only add up to 600 and not be a match. And a match on 020$a and 245$a will result in 1500 and while this is a successful match, the extra 500 point for the 245$a title match are superfluous. The incoming record successfully matched on the 020$a without the need for the 245$a match. However, if you assigned a score of 500 to the 100$a Match Point, a match on 245$a title and 100$a author will be considered a successful match (total of 1000) even if the 020$a is not a match.

Match checks are not commonly used in import rules. However, they can serve a couple of purposes in matching records. First, match checks can be used as the matching criteria instead of the match points if your indexes are stale and out of date. The match checks go right for the data instead of relying on the data in the indexes. (If you fear your indexes are out of date, a rebuild of your indexes would be a great idea and solve that situation!) The other use for a match check is as a ‘double check’ or ‘veto’ of your matching rule. For example, if you have a matching rule as below:

Threshold of 1000

Match point on 020$a 1000

Match check on 245$a

Koha will first look at the 020$a tag/subfield to see if the incoming record matches an existing record. If it does, it will then move on to the Match Check and look directly at the 245$a value in the incoming data and compare it to the 245$a in the existing ‘matched’ record in your catalog. If the 245$a matches, Koha continues on as if a match was successful. If the 245$a does not match, then Koha concludes that the two records are not a match after all. The Match Checks can be a really useful tool in confirming true matches.

When looking to create matching rules for your authority records the following indexes will be of use:

Index name	Matches MARC tag
LC-cardnumber	010$a
Personal-name	100$a
Corporate-name-heading	110$a
Meeting-name	111$a
Title-uniform	130$a
Chronological-term	148$a
Subject-topical	150$a
Name-geographic	151$a
Term-genre-form	155$a

Table: Authority indexes

Adding matching rules

To create a new matching rule :

• Click ‘New record matching rule’

  

  • Escolha um nome único e coloque-o no campo ‘Código da regra de correspondência’

  • ‘Descrição’ pode ser qualquer coisa que deixará claro pra você qual regra você estará selecionando

  • ‘Match threshold’ is the total number of ‘points’ a biblio must earn to be considered a ‘match’

  • ‘Record type’ is the type of import this rule will be used for - either authority or bibliographic

  • Ponto de Correspondência são configurados para determinar quais campos utilizar na correspondência

  • ‘Search index’ can be found by looking at the index configuration on your system. For Zebra you might find the right index names in your ccl.properties file. You can also find useful information in the Koha search indexes chapter of this manual.

  • ‘Score’ - The number of ‘points’ a match on this field is worth. If the sum of each score is equal or greater than the match threshold, the incoming record is a match to the existing record.

  • Enter the MARC tag you want to match on in the ‘Tag’ field.

  • Enter the MARC tag subfield you want to match on in the ‘Subfields’ field. For matching on controlfields like 001 the subfields input field can be left empty.

  • ‘Offset’ - Para uso com os campos de controle, 001-009

  • ‘Comprimento’ - Para uso em campos de controle, 001-009

  • There are currently several options for ‘Normalization rules’:

    • None - no normalization rule will be applied

    • Remove spaces

    • Uppercase

    • Lowercase

    • Legacy default - this option was added to maintain the behavior form before the other normalization rules became available.

    • ISBN - using this option will improve matching on ISBN. If your incoming records ISBN fields contain extra text, like ‘9780670026623 (alk. paper)’, they will still match correctly.

  • ‘Required match checks’ - While match points work on the search index, match checks work directly on the data and can be used as the matching criteria instead of the match points or in addition to them to confirm true matches.

Sample bibliographic record matching rule: Control number

• Limite para correspondências: 100

• Record type: Bibliographic

  • Note

    If you’d like a rule to match on the 001 in authority records you will need the repeat all of these values and change just the record type to ‘Authority record’

• Pontos de correspondência (apenas o único):

• Pesquisar índice: Número de controle

• Score: 100

• Tag: 001

  • Note

    este campo é para o número de controle da organização, usando, ou distribuindo o registro

• Subfields: empty

• Deslocamento: 0

• Comprimento: 0

• Normalization rule: None

• Required match checks: none (remove the blank one)

  

Record overlay rules

Record overlay rules allow for defining rules for how incoming and original MARC records should be merged on a field tag and context basis when a MARC record is updated.

Contexts

Let’s first focus on understanding the concept of contexts.

Contexts are defined by “module” and “filter” enabling separate rule sets for different contexts.

By setting different filter values for these modules, rules are applied only when the filter value matches for a particular module. A wildcard; “*”, can be used to match all possible filter values.

There are three different context modules:

borrower

Allows for defining rules that will be applied if the currently logged in user’s borrower number matches the filter condition.

categorycode

Allows for defining rules that will be applied if the currently logged in users’s category code matches the filter condition.

source

Allows for defining rules that will be applied if the record is updated in a particular part of Koha. The following update methods are supported:

• batchimport

• z39.50

• intranet

• bulkmarcimport

• import_lexile

• batchmod

A context is really nothing but a module and filter combination. Every time a record is updated i Koha, a context is set an filter values populated with context dependent values.

Examples of two different contexts are saving record in the staff client or the currently logged in user having a particular borrower number, for example “12”.

These two contexts are define as:

Module: source, filter: intranet
Module: borrower, filter: 12

Only the rules of one context, that is a module and filter combination, are applied. If multiple contexts matches they are not merged together.

If we have the following rules:

Module: source, filter: *, tag: 650, preset: Protect
Module: source, filter: *, tag: 500, preset: Protect
Module: borrower, filter: 12, tag: *, preset: Overwrite

And the context of the update where the rules are applied is:

source => "intranet" (wildcard match)
borrower => 1 (no match)

Only the first two rules will be applied.

If instead the context of rule evaluation was:

source => "intranet" (wildcard match)
borrower => 12 (an exact match, which is considered more specific than a wildcard match)

Only the second rule would be applied, even though the first two rules also matches they will be discarded since the context match of that rule set is of lower specificity because of the wildcard.

Context specificity is ranked in the following way:

• First all the rules are grouped into rule sets identified by a unique filter and module combination.

• If one or more contexts have a non wildcard filter condition match, the rule set of the context with the module of highest specificity is selected. (The modules are listed in order of specificity above).

• If no exact context match is found, but one or more wildcard matches are, the rule set of the context with the module of highest specificity is selected.

• If no context matches the default behavior is to overwrite, the original record with the incoming record.

Rules

A rule consists of a three different parts:

Context

A module and filter to match against as described above.

Tag

A field tag expression for defining which tag(s) the rule should be applied on. Three different tag expressions are supported:

• An exact tag, for example “650”.

• A regular expression, for example “6..” matching all 6XX tags.

• A wildcard, “*”, matching all tags

When rules for a specific context are evaluated, the most specific match is selected. The tag expressions above are listed in order of specificity.

Actions

Each rule defines a set of actions to take depending on the type of update. There are four types of update events: Added, Appended, Removed and Deleted. For each event an action is specified, whether to perform the update, or to skip it.

By enabling/disabling updates for these different events 16 different update behaviours can be defined. There are presets available for the most common/useful combinations:

Preset	Added	Appended	Removed	Deleted
Protect	Skip	Skip	Skip	Skip
Overwrite	Add	Append	Remove	Delete
Add new	Add	Skip	Skip	Skip
Add and append	Add	Append	Skip	Skip
Protect from deletion	Add	Append	Remove	Delete

Protect

Added: Skip, Appended: Skip, Removed: Skip, Deleted: Skip

The “Protect” preset will prevent all updates on matching fields, protecting them from being overwritten.

Given this rule:

Module: source, filter: *, Tag: 650, Preset: Protect

And the following original and incoming records:

100 1#$aTerrace, Vincent,$d1948-
650 #0$aTelevision serials$zUnited States$vCatalogs.

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

The 650 field of the original record will retain its original value after the update (but since the default behaviour if no rule matches is to overwrite, the 500 field will be added):

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision serials$zUnited States$vCatalogs.

Overwrite

Added: Add, Appended: Append, Removed: Remove, Deleted: Delete

The “Overwrite” preset will allow all updates on matching fields.

Since the default behavior is to overwrite if no rule matches, adding a rule with the overwrite preset only makes sense if there is some other rule with a lower tag specificity with a different behavior, for example a wildcard tag rule.

So given these two rules:

Module: source, filter: *, Tag: *, Preset: Protect
Module: source, filter: *, Tag: 650, Preset: Overwrite

And the following original and incoming records:

500 ##$aIncludes index.
650 #0$aTelevision serials$zUnited States$vCatalogs.

Incoming record:

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

All fields but 650 will be protected on the original record, and the resulting record will be:

500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

Add new

Added: Add, Appended: Skip, Removed: Skip, Deleted: Skip

The “Add new” allow updates only if the incoming field is new, that is there exists no fields with this tag in the original record.

Given this rule:

Module: source, filter: *, Tag: 650, Preset: Add

And the following original and incoming records:

100 1#$aTerrace, Vincent,$d1948-
650 #0$aTelevision serials$zUnited States$vCatalogs.

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

The 650 in the incoming record will not overwrite the 650 field in the original record since the original record contains one or more 650 fields. The 500 field will be added since the default rule is to overwrite. The resulting record will be:

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision serials$zUnited States$vCatalogs.

On the other hand, if the original record was:

100 1#$aTerrace, Vincent,$d1948-

The resulting record will be:

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

This is because there were no 650 fields in the original record, so adding new ones is permitted.

Add and append

Added: Add, Appended: Append, Removed: Skip, Deleted: Skip

In the “Add and append” preset, appending is also permitted, but not removing or deleting.

So if we have the following rule:

Module: source, filter: *, Tag: 650, Preset: Add and append

And the following original and incoming records:

100 1#$aTerrace, Vincent,$d1948-
650 #0$aTelevision serials$zUnited States$vCatalogs.

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

The resulting record will be:

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision serials$zUnited States$vCatalogs.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

Note that the “old” 650 field from the original record was not removed since we only allow adding or appending new values.

If we instead used the “Overwrite” preset the resulting record would instead be:

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

with the 650 field of the original record removed.

Protect from deletion

Added: Add, Appended: Append, Removed: Remove, Deleted: Skip

The preset “Protect from deletion” will allow all update operations except deletion. Deletion is defined as when there are no fields of the matching tag in the incoming record so that all of the fields with this tag would be removed on the original record.

So given the following rule:

Module: source, filter: *, Tag: 650, Preset: Protect from deletion

And the following original and incoming records:

100 1#$aTerrace, Vincent,$d1948-
650 #0$aTelevision serials$zUnited States$vCatalogs.

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

The resulting record will be:

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision pilot programs$zUnited States$vCatalogs.

On the other hand, if the incoming record was:

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.

In this case the deletion of 650 would not be permitted and the value of the field on the original record would be protected. The resulting record would instead be:

100 1#$aTerrace, Vincent,$d1948-
500 ##$aIncludes index.
650 #0$aTelevision serials$zUnited States$vCatalogs.

Custom presets

To work with custom presets, a more complete understanding of the update events is required:

Added

For a matching rule with a tag, the action configured for the “Added” event is applied for new fields in the incoming record if the original record has no fields with that tag. If the action is “Add” they will be added to the original record, if “Skip” they will be thrown away.

Appended

If the two record have common fields with the rule tag, that is one or more fields with identical subfield and identifier values, the action configured for the “Appended” event is applied for fields found in incoming record but not in original record. If the action is “Append” they will be added to the original record, if “Skip” they will be thrown away.

Removed

If the two records have common fields with the rule tag, the action configured for the “Removed” action is applied for fields found in original record but not in incoming record. If the action is “Remove” they will removed from the original record, if “Skip” they will be kept.

Deleted

If the original record have fields with the rule tag, but no fields with this tag is found in the incoming record, the action configured for the “Deleted” event is applied for the fields in the incoming record. If the action is “Delete” the fields will be removed from the original record, if “Skip” they will be kept.

OAI sets configuration

Nesta página você pode criar, editar e excluir conjuntos OAI-PMH

Criar um conjunto

To create a set:

• Clique no link ‘Adicionar um novo conjunto’

• Preencha os campos obrigatórios ‘setSpec’ e ‘setName’

• Depois, você pode adicionar descrições para este conjunto. Para fazer isso, clique em ‘Adicionar descrição’ e preencha a caixa de texto recém-criado. Você pode adicionar quantas descrições desejar.

• Clique no botão ‘Salvar’

Modify/delete a set

Para editar um conjunto, apenas clique no link ‘Editar’ na mesma linha do conjunto que queira editar. O formulário similar a criação do conjunto irá aparece e permitira editar o setSpec e SetName e descrições.

Para excluir um conjunto, clique no link ‘Excluir’ na mesma linha do conjunto que quer excluir.

Define mapeamentos

Here you can define how a set will be build (what records will belong to this set) by defining mappings. Mappings are a list of conditions on record content.

• Preencha os campos ‘Campo’, ‘Subcampo’ e ‘Valor’. Por exemplo se você quer incluir neste conjunto todos os registros que tem 999$9 igual a ‘XXX’. Preencha ‘Campo’ com 999, ‘Subcampo’ com 9 e ‘Valor’ com XXX.

• If you want to add another condition, click on ‘Add’ button and repeat step 1. You can choose between ‘and’ or ‘or’ Boolean operators to link your conditions.

• Clique em ‘Salvar’

Para excluir uma condição, apenas deixe um dos campos ‘Campo’, ‘Subcampo’ ou ‘Valor em branco e ‘Salvar’.

Note

Actually, a condition is true if value in the corresponding subfield is strictly equal to what is defined if ‘Value’. A record having 999$9 = ‘XXX YYY’ will not belong to a set where condition is 999$9 = ‘XXX’.

E é case sensitivo: um registro tem 999$9 = ‘xxx’ não será equivalente a um conjunto que tem a condição 999$9 =’XXX’.

Criar conjuntos

Once you have configured all your sets, you have to build the sets. This is done by calling the script misc/migration_tools/build_oai_sets.pl.

Item search fields

From here you can add custom search fields to the item search option in the staff client.

To add a new search term simply click the ‘New search field’ button

• Name is a field for you to identify the search term

• Label is what will appear on the item search page

• MARC field allows you to pick which field you’d like to search in

• MARC subfield is the subfield you’d like to search in

• Authorized values category can be used to turn this search field in to a pull down instead of a free text field

Once your new field is added it will be visible at the top of this page and on the item search page

Search engine configuration

Once you have switched to Elasticsearch in your SearchEngine system preference, you’ll see a new link for Search engine configuration in the Catalog section of Administration. Here you will manage indexes, facets, and their mappings to MARC fields and subfields.

Aquisições

O módulo de Aquisições do Koha fornece uma forma para os técnicos registrarem encomendas a fornecedores e gerir os orçamentos.

Before using the Acquisitions Module, you will want to make sure that you have completed all of the set up.

• Get there: More > Administration > Acquisitions

Currencies and exchange rates

Se você fez pedidos a partir de diferentes países, você pode definir as unidades monetárias, assim o módulo de aquisições calculará adequadamente os totais.

• Get there: More > Administration > Acquisitions > Currencies and exchange rates

Note

This data is not automatically updated, so be sure to keep it up to date so that your accounting is kept correct.

Note

• You can customize the columns of this table in the ‘Table settings’ section of the Administration module (table id: currency).

O código ISO inserido será utilizado quando houver importação de arquivos MARC através das ferramentas de importação de registros. A ferramenta tentará encontrar e utilizar o preço na moeda corrente.

A unidade monetária ativa é a principal unidade utilizada na sua biblioteca. Sua unidade monetária ativa terá uma seleção na coluna ‘Ativa’. Se você não possui uma unidade monetária ativa você verá uma mensagem de erro pedindo que você defina uma delas como ‘Ativa’.

Orçamentos

Budgets are used for tracking accounting values related to acquisitions. For example you could create a budget for the current year (ex. 2015) and then break that into Funds for different areas of the library (ex. Books, Audio, etc).

• Get there: More > Administration > Acquisitions > Budgets

Na tela principal de administração do orçamento, você verá duas abas: uma para orçamentos ativos, outra para os inativos.

Adding budgets

Budgets can either be created from scratch, by duplicating the previous year’s budget or by closing a previous year’s budget.

Add a new budget

If you haven’t used Koha before for acquisitions then you’ll need to start fresh with a new budget. To add a new budget click the ‘New budget’ button.

• Escolher o período de tempo do orçamento, sendo um ano acadêmico, ou fiscal, ou um semestre, etc.

• The description should be something that will help you identify the budget when ordering

• Na caixa de montante não use qualquer símbolo, apenas insira o montante do orçamento com números e decimais.

• Tornar um orçamento ‘Ativo’ torna-o usável quando se realiza encomendas no módulo de aquisições, mesmo que a encomenda seja colocada depois do termino do orçamento, permitindo guardar encomendas antigas.

• Locking a budget means that funds will not be able to be modified by librarians

Once you have made your edits, click the ‘Save changes’ button. You will be brought to a list of your existing budgets.

Duplicate a budget

To duplicate a budget from a previous year, click on the link for the budget name from the list of budgets

On the screen listing the budget breakdown click the ‘Edit’ button at the top and choose to ‘Duplicate budget’

Você também pode clicar no botão ‘Ações’ a direita do nome do orçamento, na lista de orçamentos, e escolher a opção ‘Duplicar’.

Você será levado a um formulário no qual é preciso inserir a nova data de início e término e salvar o orçamento.

Verifique a caixa ” Marcar o orçamento original como inativo ‘ se o orçamento original não deve mais ser usado.

Marque a caixa para ‘Definir todos os fundos a zero ‘ se quiser que o novo orçamento para conter as mesmas estruturas de fundos como o orçamento anterior mas sem atribuições até que você insira manualmente um montante no fundo.

This will not only duplicate your budget, but all of the funds associated with that budget so that you can reuse budgets and funds from year to year and so that you can move unreceived orders and if desired unspent funds from a previous budget to the new budget.

Fechar um orçamento

Close a budget to move or roll over unreceived orders and if desired unspent funds from a previous budget to a new budget. Before closing your budget you might want to duplicate the previous year’s budget so that you have somewhere for the unreceived orders to roll to.

Encontre o Orçamento anterior com um ordens recebidas sobre os orçamentos ativos ou os orçamentos guia inativo e selecione “Fechar” em “Ações”.

Note

In order for the unreceived orders to be automatically moved to the new budget, the fund structures in the previous budget must exist in the new budget. Budgets without unreceived orders cannot be closed.

Quando terminar, clique em ‘Salvar Alterações’ e você verá seu novo campo.

Use o ‘Select a budget’ desça para baixo para escolher o novo orçamento para as ordens não recebidas.

Marque a caixa de ‘Move restantes fundos não utilizados ‘ para mover os montantes não utilizados de fundos do orçamento que está sendo fechado para o orçamento selecionado.

Depois de ter feito as suas escolhas , clique no botão ‘ ordens unreceived Move’ . Você será presenteado com uma caixa de diálogo que diz: ” Você escolheu para mover todas as ordens unreceived de ‘ Orçamento X ‘ para ‘ Orçamento Y’ . Essa ação não pode ser revertida. Você deseja continuar?’ Orçamento X é o orçamento a ser fechado e Orçamento Y é o orçamento selecionado.

Se tudo parece correto , clique em ‘ OK’ e as ordens unreceived e, se selecionado, os fundos não utilizados serão movidos .

Aguarde até aparecer ‘O relatório de transferência dos pedidos não recebidos do orçamento X para o Y’. Deste modo aparecerá uma lista dos número dos pedidos (agrupados por fundos) que foram impactados e detalhes se o pedido não recebido foi transferido ou se houve algum problema na transferência. Por exemplo, se o novo orçamento não possui um fundo com o mesmo nome do orçamento anterior, o pedido não será transferido de um para outro.

Fundos

• Get there: More > Administration > Acquisitions > Funds

Add a fund

Um fundo é adicionado a um orçamento.

Important

A budget must be defined before a fund can be created.

To add a new fund click the ‘New’ button and then choose which budget you would like to add the fund to.

No formulário que aparece insira o básico acerca do seu fundo.

Os três primeiros campos são necessário, o resto é opcional

• Fund code is a unique identifier for your fund

• The fund name should be something that librarians will understand

• Montante deve apenas conter números e decimais, sem outros caracteres.

• Warning at (%) or Warning at (amount) can be filled in to make Koha warn you before you spend a certain percentage or amount of your budget. This will prevent you from overspending.

• You can choose to assign this fund to a librarian. Doing so will make it so that only that librarian can make changes to the fund

• Escolher a biblioteca que usará este fundo

• You can restrict who can order from this fund by choosing either the ‘owner’, ‘owner and users’ or ‘owner, users and library’ from the ‘Restrict access to’ menu

  

  • Important

    Without an owner, the access restriction will be ignored, be sure to enter an owner as well as choose a restriction

• As notas são simplesmente para todas as notas descritivas que você pode querer adicionar para que os bibliotecários saber quando usar este fundo

• Planning categories are used for statistical purposes. If you will be using the Asort1 and/or Asort2 authorized values lists to track your orders you need to select them when setting up the fund. Select the Asort1/Asort2 option from the dropdown lists for the Statistical 1 done on: and Statistical 2 done on: fields.

• To learn more about planning categories, check out the Planning category FAQ.

Quando completo, clique no botão para submeter e será mostrada a lista de todos os fundo para o orçamento.

The monetary columns in the fund table break down as follows:

1. Base-level allocated is the ‘Amount’ value you defined when creating the fund

2. Base-level ordered is the ordered amount for this fund (without child funds)

3. Total ordered is the base-level ordered for this fund and all its child funds

4. Base-level spent is the spent amount for this fund (without child funds)

5. Total spent is the base-level spent for this fund and all its child funds

6. Base-level available is 1 - 2

7. Total available is 1 - 3

To the right of each fund you will find the ‘Actions’ button under which you will find the ‘Edit,’ ‘Delete,’ and ‘Add child fund’ options.

A child fund simply a sub-fund of the fund listed. An example would be to have a fund for ‘Fiction’ and under that have a fund for ‘New releases’ and a fund for ‘Science Fiction.’ It is an optional way to further organize your finances.

Fundos com fundos dependentes irão mostrar uma pequena seta à esquerda. Clicando-a os fundos dependentes irão aparecer na tabela.

Budget planning

Na tela de controle dos fundos clique no botão de ‘Planejamento’ e escolha como deseja gastar o orçamento.

If you choose ‘Plan by MONTHS’ you will see the budgeted amount broken down by months:

To hide some of the columns you can click the ‘hide’ link to the right (or below as in the screenshot above) the dates. To add more columns you can click the ‘Show a column’ link found below the ‘Fund remaining’ heading.

A partir daqui você pode planejar o seu orçamento inserindo manualmente os valores ou clicando no botão de auto-preenchimento. Se você optar por preencher automaticamente o formulário, o sistema tentará dividir o montante da melhor maneira possível (pode ser necessário alguns ajustes para dividir os valores de forma mais acurada).

Uma vez que as alterações sejam feitas, clique no botão ‘Salvar’. Se você gostaria de exportar os seus dados como um arquivo CSV, pode fazer isso inserindo o nome do arquivo no campo ‘Exportar para um arquivo chamado’ e clicando no botão ‘Exportar’.

EDI accounts

From here you can set up the information needed to connect to your acquisitions vendors.

Note

Before you begin you will need at least one Vendor set up in Acquisitions.

To add account information click the ‘New account’ button.

In the form that appears you will want to enter your vendor information.

See the EDI questions for vendors section of the acquisitions module chapter for a description of each field.

Each vendor will have one account.

Library EANs

A library EAN is the identifier the vendor gives the library to send back to them so they know which account to use when billing. One EDI account can have multiple EANs.

To add an EAN click the ‘New EAN’ button.

In the form that appears enter the information provided by your vendor.

See the EDI questions for vendors section of the acquisitions module chapter for a description of each field.

Additional parameters

• Get there: More > Administration > Additional parameters

Servidores Z39.50/SRU

Z39.50 is a client/server protocol for searching and retrieving information from remote computer databases, in short it’s a tool used for copy cataloging.

SRU- Search/Retrieve via URL - is a standard XML-based protocol for search queries, utilizing CQL - Contextual Query Language - a standard syntax for representing queries.

Using Koha you can connect to any Z39.50 or SRU target that is publicly available or that you have the log in information to and copy both bibliographic and/or authority records from that source.

• Get there: More > Administration > Additional parameters > Z39.50/SRU servers

Koha comes with a default list of Z39.50/SRU targets set up that you can add to, edit or delete

To find additional Z39.50 targets you use IndexData’s IRSpy: http://irspy.indexdata.com or the Library of Congress’s list of targets http://www.loc.gov/z3950/

Add a Z39.50 target

• From the main Z39.50 page, click ‘New Z39.50 server’

  

  • O ‘Servidor Z39.50’ pode ser preenchido com um nome que irá ajuda-lo e identificar sua fonte (como o nome da biblioteca, por exemplo).

  • ‘Hostname’ é o endereço do servidor Z39.50..

  • ‘Porta’ indica ao Koha de qual porta ele deve aguardar a chegada de resultados da busca no servidor..

  • ‘Usuário’ e ‘Senha’ são requeridos apenas por servidores protegidos por senha.

  • Check the ‘Preselected’ box if you want this target to always be selected by default.

  • ‘Rank’ lets you enter where in the list you’d like this target to appear.

    • Caso permaneça em branco, os servidores ficarão em ordem alfabética.

  • ‘Attributes’ lets you define PQF attributes to be added to all queries.

  • ‘Syntaxe’ é a estrutura MARC que você utiliza.

  • ‘Encoding’ mostra ao sistema como ler caracteres especiais.

  • ‘Timeout’ pode ser útil para servidores que demoram demais. Você pode definir um tempo máximo de espera, assim o sistema não fica eternamente esperando por resultados.

  • ‘Tipo de registro’ permite definir se o registro é bibliográfico ou de autoridade

  • ‘XSLT file(s)’ lets enter one or more (comma-separated) XSLT file names that you want to apply on the search results.

    • When retrieving records from external targets you may wish to automate some changes to those records. XSLT’s allow you to do this. Koha ships with some sample XSLT files in the /koha-tmpl/intranet-tmpl/prog/en/xslt/ directory ready for use:

      • Del952.xsl: Remova os itens (MARC21/NORMARC)

      • Del995.xsl: Remova os itens (UNIMARC)

      • Del9LinksExcept952.xsl: Remove $9 links. Skip item fields (MARC21/NORMARC)

      • Del9LinksExcept995.xsl: Remove $9 links. Skip item fields (UNIMARC)

Suggested bibliographic Z39.50 targets

Koha libraries with open Z39.50 targets can share and find connection information on the Koha wiki: http://wiki.koha-community.org/wiki/Koha_Open_Z39.50_Sources. You can also find open Z39.50 targets by visiting IRSpy: http://irspy.indexdata.com.

Os servidores a seguir foram utilizados com sucesso por outras bibliotecas que utilizam o Koha (nas Américas):

• ACCESS PENNSYLVANIA 205.247.101.11:210 INNOPAC

• CUYAHOGA COUNTY PUBLIC webcat.cuyahoga.lib.oh.us:210 INNOPAC

• GREATER SUDBURY PUBLIC 216.223.90.51:210 INNOPAC

• HALIFAX PUBLIC catalog.halifaxpubliclibraries.ca:210 horizon

• HALTON HILLS PUBLIC cat.hhpl.on.ca:210 halton_hills

• LIBRARY OF CONGRESS lx2.loc.gov: 210 LCDB

• LONDON PUBLIC LIBRARY catalog.londonpubliclibrary.ca:210 INNOPAC

• MANITOBA PUBLIC library.gov.mb.ca:210 horizon

• MILTON PL cat.mpl.on.ca:210 horizon

• NATIONAL LIBRARY OF WALES cat.llgc.org.uk:210 default

• NHUPAC 199.192.6.130:211 nh_nhupac

• OCEAN STATE LIBRARIES (RI) catalog.oslri.net:210 INNOPAC

• OHIOLINK olc1.ohiolink.edu:210 INNOPAC

• PUBCAT prod890.dol.state.vt.us:2300 unicorn

• SAN JOAQUIN VALLEY PUBLIC LIBRARY SYSTEM (CA) hip1.sjvls.org:210 ZSERVER

• SEATTLE PUBLIC LIBRARY ZSERVER.SPL.ORG:210 HORIZON

• TORONTO PUBLIC symphony.torontopubliclibrary.ca:2200 unicorn

• TRI-UNI 129.97.129.194:7090 voyager

• VANCOUVER PUBLIC LIBRARY z3950.vpl.ca:210 Horizon

Suggested authority Z39.50 targets

Os servidores a seguir foram utilizados com sucesso por outras bibliotecas que utilizam o Koha (nas Américas):

• LIBRARIESAUSTRALIA AUTHORITIES z3950-test.librariesaustralia.nla.gov.au:210 Usuário: ANLEZ / Senha: z39.50

• LIBRARY OF CONGRESS NAME AUTHORITIES lx2.loc.gov:210 NAF

• LIBRARY OF CONGRESS SUBJECT AUTHORITIES lx2.loc.gov:210 SAF

Add a SRU target

• From the main Z39.50/SRU page, click ‘New SRU server’

  

  • O ‘Servidor Z39.50’ pode ser preenchido com um nome que irá ajuda-lo a identificar sua fonte (como o nome da biblioteca, por exemplo).

  • ‘Hostname’ é o endereço do servidor Z39.50..

  • ‘Porta’ indica ao Koha de qual porta ele deve aguardar a chegada de resultados da busca no servidor..

  • ‘Usuário’ e ‘Senha’ são requeridos apenas por servidores protegidos por senha.

  • Check the ‘Preselected’ box if you want this target to always be selected by default.

  • ‘Rank’ lets you enter where in the list you’d like this target to appear.

    • Caso permaneça em branco, os servidores ficarão em ordem alfabética.

  • ‘Syntaxe’ é a estrutura MARC que você utiliza.

  • ‘Encoding’ mostra ao sistema como ler caracteres especiais.

  • ‘Timeout’ pode ser útil para servidores que demoram demais. Você pode definir um tempo máximo de espera, assim o sistema não fica eternamente esperando por resultados.

  • ‘Additional SRU options’ is where you can enter additional options of the external server here, like sru_version=1.1 or schema=marc21, etc. Note that these options are server dependent.

  • ‘SRU Search field mapping’ lets you add or update the mapping from the available fields on the Koha search form to the specific server dependent index names.

    • Para refinar ainda mais suas pesquisas, você pode adicionar os seguintes nomes de índice para os mapeamentos de campo de busca SRU. Para fazer isso, edite o servidor e clique no botão Modificar próximo a este campo.

      Título	dc.title
      ISBN	bath.isbn
      Qualquer	cql.anywhere
      Autor	dc.author
      ISSN	bath.issn
      Assunto	dc.subject
      ID padrão	bath.standardIdentifier

      Table: SRU mapping

  • ‘XSLT file(s)’ lets enter one or more (comma-separated) XSLT file names that you want to apply on the search results.

    • When retrieving records from external targets you may wish to automate some changes to those records. XSLT’s allow you to do this. Koha ships with some sample XSLT files in the /koha-tmpl/intranet-tmpl/prog/en/xslt/ directory ready for use:

      • Del952.xsl: Remova os itens (MARC21/NORMARC)

      • Del995.xsl: Remova os itens (UNIMARC)

      • Del9LinksExcept952.xsl: Remove $9 links. Skip item fields (MARC21/NORMARC)

      • Del9LinksExcept995.xsl: Remove $9 links. Skip item fields (UNIMARC)

Você quis dizer

Get there: More > Administration > Additional parameters > Did you mean?

Koha can offer ‘Did you mean?’ options on searches based on values in your authorities.

Important

Did you mean? only works in the OPAC at this time. The intranet options are here for future development.

Usando esta página você pode controlar quais opções o Koha dá aos usuários no resultado de busca.

Habilitando a barra ‘Você quis dizer`nos resultados de pesquisa você precisa marcar quais plugins você deseja usar. Os dois plugins que você pode escolher são:

• O plugin ExplodedTerms sugere que o usuário tente buscar por termos gerais/específicos/relacionados para uma determinada pesquisa (ex. um usuário pesquisando por “New York (Estado)” pode clicar no link por termos específicos e se ele se interessar por “New York (Cidade)”). Isto só é relevante para bibliotecas com dados de autoridade de hierarquia consolidados.

• O plugin AuthorityFile busca no arquivo de autoridades e sugere aos usuários os principais registros bibliográficos relacionados as 5 principais autoridades

Se você deseja que um plugin tenha prioridade sobre outro, você precisa simplesmente o arrastar sobre ele.

If you choose both plugins you will see several options at the top of your search results

If you choose just the AuthorityFile you’ll see just authorities.

Table settings

This administration area will help you hide or display columns on fixed tables throughout the staff interface and OPAC.

• Get there: Administration > Additional parameters > Table settings

Clicando no módulo que você gostaria de editar as tabelas para lhe mostrar as opções disponíveis para você .

This area lets you control the columns that show in the table in question. If nothing is hidden you will see no check marks in the ‘is hidden by default’ column.

And will see all of the columns when viewing the table on its regular page.

If columns are hidden they will have checks in the ‘is hidden by default’ column.

And hidden when you view the table.

The ‘Cannot be toggled’ column is used to prevent individual users from showing or hiding this column when viewing the table.

Individual users can toggle columns using the ‘Columns’ button at the top of the table.

For example, in the Currencies table, the ‘Currency’ and ‘Rate’ columns cannot be toggled. When the user clicks on the ‘Columns’ button, they are not able to choose whether these two columns are hidden or visible.

Note that using the ‘Columns’ button show or hide columns will only toggle them for the current user and session. Once the user logs out, the columns will go back to their default settings as set in the table settings administration page. It will not affect any other user.

Module	Tables
Aquisições	Basket summary (orders) Order search results (histsearcht) Late orders (late_orders) Suggestions (suggestions) Funds table on the main acquisition page (accounts)
Administração	Patron categories (patron_categories) Currencies (currency) Item types (table_item_type) Libraries (libraries)
Authorities	There aren’t any tables that can be configured from the Authorities module.
Catalog	Acquisition details (acquisitiondetails-table) Checkout history (checkoutshistory-table) Holdings/items (holdings_table) Holdings/items from other libraries (otherholdings_table) (when SeparateHoldings is enabled)
Cataloging	Item table above edit item form (Items Editor) Z39.50 search results (resultst)
Circulation	Checkouts (issues-table) Patron search results (table_borrowers) Holds to pull (holds-to-pull) Holds awaiting pickup (holds waiting over X days) (holdso) Holds awaiting pickup (holds waiting) (holdst) Hold ratios (holds-ratios) Overdues report (circ-overdues) Checkins (checkedintable) Holds queue (holds-table)
Course reserves	Courses (courses page, course_reserves_table) Reserves (reserves page, course_reserves_table)
Interlibrary loans	Requests (ill-requests)
Patrons	Patron checkout history (checkouthistory-table) Accounting > Transactions (account-fines) Holds history (holdshistory-table) Patron search results (memberresultst) Details > Checkouts (issues-table) Patron lists (patron-list-table) Accounting > Make a payment (pay-fines-table)
Point of sale	Point of sale (invoices)
Tools	Log viewer (logst) Notices and slips (lettert) Stock rotation rotas (stock_rotation) Stock rotation items (stock_rotation_manage_items)
OPAC	Course reserves (course-items-table) Courses (course_reserves_table) Holdings/Items (holdingst) Serials issues on subscription tab (subscriptionst)
Reports	Items lost (lostitems-table) Orders by fund (funds-table) Saved SQL reports (table_reports)
Serials	Acquisition details (orders)

Nota

Patrons in the OPAC can’t toggle column visibility. For OPAC tables this feature only allows to control the visibility of columns.

Nota

Any tables with columns listed here also have the option to export to Excel, export to CSV, copy, or print within the table header.

Alarmes de Áudio

If you have your AudioAlerts preference set to ‘Enable’ you will be able to control the various alert sounds that Koha uses from this area.

• Get there: More > Administration > Additional parameters > Audio alerts

Each dialog box in Koha has a CSS class assigned to it that can be used as a selector for a sound.

You can edit the defaults by clicking the ‘Edit’ button to the right of each alert.

You can assign alerts to other CSS classes in Koha by entering that information in the selector box. For example if you enter

body:contains('Check in message')

Then when you visit the check-in page you will hear an alert.

Every page in Koha has a unique ID in the body tag which can be used to limit a sound to a specific page

Any ID selector (where HTML contains id=”name_of_id” ) and can also be a trigger as: #name_of_selector

SMS cellular providers

Important

This option will only appear if the SMSSendDriver preference is set to ‘Email’

From here you can enter as many cellular providers as you need to send SMS notices to your patrons using the email protocol.

Some examples in the US are:

Mobile carrier	SMS gateway domain
Alltel	sms.alltelwireless.com
AT&T	txt.att.net
Boost Mobile	sms.myboostmobile.com
Project Fi	msg.fi.google.com
Republic Wireless	text.republicwireless.com
Sprint	messaging.sprintpcs.com
T-Mobile	tmomail.net
U.S. Cellular	email.uscc.net
Verizon Wireless	vtext.com
Virgin Mobile	vmobl.com

Table: SMS provider examples

To add new providers enter the details in the form and click ‘Add new’ to save.

These options will appear in the OPAC for patrons to choose from on the messaging tab if you have EnhancedMessagingPreferences enabled.

Share your usage statistics

You can share your Koha usage statistics with the Hea community. Sharing your usage statistics helps with the development of Koha as the community regularly checks these statistics to make decisions.

Note that statistics are anonymized and no patron information is shared.

Worldwide statistics can be viewed at https://hea.koha-community.org/

• Share my Koha usage statistics:

  • The default choice is ‘Undecided’, this make the message appear on the administration main page.

  • Choose ‘yes’ if you want to share your usage statistics

  • Choose ‘no’ if you don’t want to share your statistics and you don’t want to see the message on the administration page

• Your country: choose the country where your library is located

• Library name: enter your library’s name

• Library type: choose your library’s type

• Library URL: enter your library’s Web site URL

• Last update: here your will see the last date when your data was uploaded to the Hea website

• Geolocation: use the map on the right to put the marker where your main library is situated. The coordinates will appear in the Geolocation field.

• Libraries information: if you have more than one branch, you can choose ‘yes’ here to put all your branches on the map

• See your public page: this is the URL to your information on the Hea website.

Click ‘Update your statistics usage’ to save the information.

Share content with Mana KB

Mana KB is a worldwide knowledge base used to share content specific to libraries. Koha is currently connected to Mana Kb in order to share serial subscription models and reports. This section is used to configure your connexion with Mana KB.

Get there: More > Administration > Additional parameters > Share content with Mana KB

In the form, choose whether you want to use Mana KB to share content or not. The default is “No, let me think about it”. If you do want to use Mana KB, change the option to “Yes”. If you do not want to share with Mana KB, choose “No”, this will remove the blue rectangle from the Administration home page.

The rest of this section assumes you chose “Yes”.

Choose whether you want to share your subscription models automatically. This means that every time you create a subscription in the serials module, it will be automatically shared with Mana KB and other libraries will be able to copy it.

In order to configure Mana KB, you must get a Mana KB token to authenticate your Koha installation on the Mana KB server.

Enter your name or your organization’s name in the “Your name” field.

Enter your email in the “Email” field. Make sure you have access to this email inbox since you will receive further information by email.

Once you send your information to Mana KB, you will get a Mana KB token.

In the email your receive, click on the confirmation link and confirm you are not a robot to finish the Mana KB setup.

Additional fields

This section is used to add custom fields to serial subscriptions or order baskets.

To add a new field, first choose which table you want to add it to.

• Order baskets (aqbasket): a field added to aqbasket will appear upon the creation of a new order basket or the modification of an existing order basket in the acquisitions module.

  

• Subscriptions (subscription): a field added to subscription will appear when creating a new subscription or when editing an existing subscription in the serials module.

  

Click on “Create field”

Fill out the form

• Name: this is the name of the field as you want it to appear.

• Authorized value category: if you want to add a drop-down menu to the field choose an authorized value category here (you can also create a new authorized value category if you need to).

• MARC field: for additional subscription fields, it is possible to link the field to a MARC field. The additional field will be automatically populated with the corresponding record’s value for this MARC field.

Nota

You can only choose one of the two options (authorized value OR MARC field)

Aviso

If you choose the MARC field, make sure you enter it in this format: field$subfield

For example: 590$a

• Searchable: check this box if you want to be able to search baskets or subscriptions based on this field

  • Order basket searchable additional fields will be available in the orders advanced search form

  • Subscription searchable additional fields will be available in the subscription advanced search form

Examples of additional fields

Example 1: Additional subscription field using authorized values

You might want to track which department you’re ordering this serial for

• In the ‘Name’ field, enter ‘Department’

• In the ‘Authorized value category’ field, choose DEPARTMENT

• Check the ‘Searchable’ box

When you are adding a subscription, the field will be in the ‘Additional fields’ section with its authorized values drop-down menu.

When you view the subscription, the field will appear under ‘Additional fields’.

Because we made the field searchable, it will also be in the serials subscription search.

Example 2: Additional field using MARC field

This is particularly useful if you want to view bibliographic information in the subscription detail page. In this example, we will add the 521$a field, which is, in MARC21, the target audience note.

• In the ‘Name’ field, enter ‘Target audience’

• In the ‘MARC field’ field, enter ‘521$a’

Nota

You will not be able to edit this field from the subscription form. If you need to add or change the value in this field, you must go through the cataloging module.

When you view the subscription, the field and the information from the bibliographic record will appear under ‘Additional fields’.