Časté dotazy

Návody na instalaci

Question: How can I find out what version of Koha I am using?

Answer: The easiest way to find out your Koha version is taking a look at the About page of the staff interface.

You can also find out from the OPAC by taking a look at the HTML source. It will look something like:

<meta name="generator" content="Koha 23.1100000" /> <!-- leave this for stats -->

Question: Should I use the Debian packages or the tarball to install Koha?

Answer: It is highly recommended that you use packages to install Koha. It is the easiest way to install Koha, and provides many commands to help manage your Koha installation.

Use the Koha on Debian instructions on the Wiki to install Koha on Debian-based systems (including Debian, Ubuntu, and Mint).

The package commands page on the Wiki has an introduction and basic information about the commands available.

Only install Koha using the tarball or git if you have a specific need (such as installing Koha on non-Debian-based systems) and are an experienced GNU/Linux system administrator.

Developers should use KTD (koha-testing-docker) , as it’s the easiest and quickest way to get a development environment running.

OPAC and staff interface

Cookies

Question: What cookies does Koha use?

Answer: The cookies Koha uses on the OPAC and in the staff interface are documented in the Koha Community wiki:

https://wiki.koha-community.org/wiki/Use_of_Cookies

Custom item type/authorized value icons

Question: Can I have my own set of item type images (or authorized value icons)?

Answer: Absolutely. To add additional icons to your system you simply add a new directory to koha-tmpl/intranet-tmpl/prog/img/itemtypeimg/ and to koha-tmpl/opac-tmpl/bootstrap/itemtypeimg and put your icons in the new directory. Your icons will show up in a new tab as soon as they are in the folders.

  • Poznámka

    Remember to put the icons in both places (on the OPAC and the intranet).

Customizing Koha images

Question: Can I customize the images in the OPAC?

Answer: Absolutely. Koha comes with a series of original images that you can alter to meet your needs. The originals can be found in the misc/interface_customization/ directory.

OPAC display fields

Question: What MARC fields print to the different OPAC screens in Koha?

Answer: The XSLT preference must be set as follows for the following fields to show

The OPAC results page shows:

  • 245

  • 100,110,111,700,710,711

  • 100,110,111,700,710,711

  • 250

  • 260

  • 246

  • 856

The OPAC details page shows:

  • 245

  • 100,110,111,700,710,711

  • 100,110,111,700,710,711

  • 440,490

  • 260

  • 250

  • 300

  • 020

  • 022

  • 246

  • 130,240

  • 6xx

  • 856

  • 505

  • 773

  • 520

  • 086

  • 773

  • 780

  • 785

  • plus all of the 5xx fields in the ‚Notes‘ tab at the bottom

Povolí všem čtenářům s překročenou lhůtou výpůjček, aby si mohli dále půjčovat

Question: Can patrons see the barcodes for the items they have checked out.

Answer: Not by default, but with a few edits to the patron record you can make a barcode column appear on the patron’s check out summary in the OPAC. You can set up a patron attribute with the value of SHOW_BCODE and authorized value of YES_NO to make this happen.

Example of adding a patron attribute type with code SHOW_BCODE, the description is "Show barcode on patrons' checkouts in the OPAC" and the authorized value is YES_NO

Then on the patron’s record set the value for SHOW_BCODE to yes.

Example of modifying patron attributes in a patron's file. The mouse cursor is on the 'Yes' option for "Show barcode on patron's checkouts in the OPAC"

Toto přidá sloupec k přehledu výpůjček v OPACu, kde so zobrazí čárové kódy jednotek, které má četnář vypůjčené.

View of the account summary on the OPAC

Kliknutí na záložku „Opožděno“ ukáže pouze jdenotky, které přetáhly výpůjční dobu.

Circulation/notices

Fees and fines

Question: Why am I getting fined 5.00 for every loan?

Answer: The money you are seeing on your patron’s account isn’t a fine, but a rental fee. The optional default item types that come with the Koha sample data might contain a rental fee. To remove this fee, do the following:

  • Click More > Administration

  • Click Item types

  • Note which item types have a 5.00 fee associated with them, select them for editing

  • Remove the fee, and save the item type

Book drop

Question: How is the book drop date determined? Is it the last open date for the checkout library? Is it today’s date minus one? Can the book drop checkin date be set?

Answer: If the library is closed for four days for renovations, for example, there would be more than one day needed for the book drop date. You will only have one book drop date and that will be the last day that the library was open (determined by the holiday calendar) because there is no real way to know what day the books were dropped into the box during the 4 closed days.

If you need to set a different checkin date, you can use the SpecifyReturnDate system preference. This will allow you to set an arbitrary date and any overdue fines will be recalculated accordingly.

Holds to pull and holds queue

Question: What is the difference between the Holds queue and Holds to pull reports?

Answer: The holds to pull report gives a simple list of what holds need to be filled with available items. It shows the ‚live‘ data of your database, so new holds will turn up there immediately. It shows information about each hold including all libraries where items of the requested title are available.

The holds queue report is divided by libraries and will list the hold only for one library where it is available. For libraries with lots of holds and multiple branches this will prevent multiple libraries pulling the item off the shelf at the same time.

The holds queue report is generated by the build_holds_queue.pl cron job. By default it runs hourly, but it might be changed to run at any other interval. There are various configuration options to determine the library to provide the item. For example:

Printing overdue notices

Question: Can I print overdue notices for patrons without email addresses on file?

Answer: Yes. By default Koha will email all overdue notices to patrons without email address to the library.

Additionally the overdue notice cron job has a setting to generate the overdue notices as HTML for printing. An example of this usage would be:

::

overdue_notices.pl -t -html /tmp/noticedir -itemscontent issuedate,date_due,title,barcode,author

In this example, we wanted to use only certain item fields in our notices, so we specified itemscontent fields in the cron entry; that’s not a requirement for the feature.

The command line needs to specify a web-accessible directory where the print notices will go – they get a filename like notices-2018-11-24.html (or holdnotices-2018-11-24.html). The overdue notice itself can be formatted to fit a Z-mailer. Within the notice file, the text is spaced down or over to where it will print properly on the form. The script has code that wraps around the notice file to tell the HTML to obey the formatting, and to do a page break between notices. The system preference PrintNoticesMaxLines can be used to specify the page length for libraries that allow a lot of checkouts which can lead to some notices running onto multiple pages. That system preference says to truncate the print notice at that page length and put in a message about go check your OPAC account for the full list.

The cron entry is gather_print_notices.pl /tmp/noticedir

Unable to renew items

Question: We’re trying to renew some items for our patron. One of the items is on hold and ineligible for renewal, but the other two items refuse to renew even though they should be eligible. When I try to use the override renewal limit, it just returns a little message that says „renewal failed“. Any idea what’s going on here?

Answer: At the very least you will need to set an absolute default circulation rule. This rule should be as standard rule for all libraries, ‚All‘ itemtype‘, and ‚All‘ patron category. That will catch anyone who doesn’t match a specific rule. Patrons who do not match a specific rule will get blocked from placing holds or renewing items, since there was no baseline number of holds or renewals to utilize.

Unable to place holds

Question: Why can’t I place holds when I have all of the preferences turned on?

Answer: You probably need to set a default circulation rule in your circulation and fines rules. This should be a standard rule for all libraries, and all patron categories and item types. That will catch all instances that do not match a specific rule.

The ability to place holds also depends on the ‚On shelf holds allowed‘ setting in the circulation rule that is used. Depending on the setting, it might not be possible to place a hold if any or all items for a record are checked out.

Klávesové zkratky

Question: Do I have to use my mouse to access the checkout, checkin, renewal and catalog tabs at the top of the circulation pages?

Answer: You can jump between the tabs on the quick search box at the top of the screen by using the following hot keys (if the tab is available):

  • jump to the catalog search with Alt+q

  • jump to the checkout with Alt+u

    • tato zkratka nefunguje na počítačích typu Mac

  • jump to the renewal tab with Alt+w

  • jump to the checkin with Alt+r

    Poznámka

    Mac users use the OPTION button in place of Alt

SMS notices/messages

** Otázka **: Chci aby mi Koha zasílala oznámení prostřednictvím SMS, co pro to musím udělat?

Odpověď: Nejprve si musíte vybrat SMS operátora, se kterým budete Kohu používat. Zde je k dispozici seznam: http://search.cpan.org/search?query=sms%3A%3Asend&mode=all. Ne všichni operátoři dostupní pro použití v knihovnách mají Perl ovladače, takže tento seznam rozhodně projděte abyste si ověřili zda je vámi zvolený operátor k dispozici. Pokud se vašeho operátora nechcete ptát, zda mají Perl ovladače, měli byste zvážit použití jiného. Některé obvyklé možnosti využívané v USA (které mají Perl ovladače) jsou:

Alternatively you can configure Koha to send SMS via Email. In order to use this feature you need to set the SMSSendDriver system preference to ‚Email‘ and configure the email gateways for the different SMS cellular providers of your patrons. Be aware that many mobile providers have deprecated support for the SMS::Send::Email feature. It is not recommended for use unless you have a dedicated SMS to Email gateway.

In any case you might want to check if sending SMS to your patrons is legal in your location.

Otázka: A co v Indii?

Answer: India does not yet have too many options here. This is partly due to the Telecom regulatory authority’s (TRAI) stipulations about transactional SMSes and limits on the number of SMSes that may be sent/received per users per day. India specific drivers include:

  • Společnost Unicel Technologies Pvt Ltd (unicel.in)

Email notices/messages

Question: How do I prevent my libraries notices ending up marked as spam?

Answer: This is a complicated topic, but thankfully Koha gives you a good degree of control via various system preferences.

For every email sent out from Koha there are three important addresses for the system to get correct, From, Reply-to and Sender. These are configurable at both the system and library level and should fall back in a suitable manner if any of them are not defined.

  • KohaAdminEmailAddress - This will act as the From address and should be an address in the same domain as the koha server [for example noreply@koha-hosting.org]

  • ReplytoDefault - This will act as the Reply-to address and can be in any domain [for example librarian@mylibrary.com] and this is the address which will be used if/when a patron hits ‚Reply‘ in their email client. Note: This will fall back to KohaAdminEmailAddress when it is not set.

  • ReturnpathDefault - This will act as the Sender address and also needs to be within the koha/email servers domain [for example postmaster@koha-hosting.org] and this is the address which will be used to report if an email bounces for any reason.

There are parallels to all the above preferences at the per branch level which fall back in the same order as mentioned above before falling back to the system level preferences above when required.

If you have the above configured correctly and your emails are still being treated as spam then you likely need to contact your email service provider/dns provider and look into MX, SPF and DKIM records.

Katalogizace

Autority

Question: Why can’t I edit 1xx, 6xx, or 7xx fields in my bibliographic record?

View of the 100 MARC21 field, Main entry personal name, and subfields 100$a, Personal name, and 100$d, dates associated with a name. 100$a, Personal name, is grayed out and has a lock icon in the field.

Answer: These fields are authority controlled and you probably have the RequireChoosingExistingAuthority system preference set to „require“. When it is set to „require“, these fields will be locked and require you to search for an existing authority record to populate the field with. To allow typing in these authority fields set RequireChoosingExistingAuthority to „don’t require“.

Question: Can I use Koha without creating authority records?

Answer: If you don’t want to create authorities for your records at all, you can remove the authority link by blanking the Thesaurus setting for the fields in your MARC bibliographic frameworks. See also: Edit framework subfields

You can also set the RequireChoosingExistingAuthority system preference to „don’t require“ and the AutoCreateAuthorities system preference to „don’t generate“. This will allow you to enter anything in controlled fields, and no authority will be created.

Mapování polí Koha na MARC

Question: What’s the relationship between ‚Koha to MARC mapping‘ and ‚MARC bibliographic frameworks‘?

Answer: Mappings can be defined through ‚MARC bibliographic frameworks‘ OR ‚Koha to MARC mapping‘. ‚Koha to MARC mapping‘ is just a shortcut to speed up linkage. If you change a mapping in one of these modules, the mapping will change in the other as well. In other words, the two modules ‚overwrite‘ each other in order to prevent conflicts from existing in Koha.

Number of items per bibliographic record

Otázka: Existuje limit počtu jednotek, které mohu připojit k bibliografickému záznamu?

Answer: There is no limit to the number of items you can attach to a bibliographic record. For records with a big number of items exporting the MARC record as ISO 2709 might be problematic as this format has a size limit. Item numbers somewhere between 600 and 1000 items on a ‚normal‘ bibliographic record should be OK.

Analytický popis

Question: I am using the EasyAnalyticalRecords feature, but my links in the OPAC and Staff client to ‚Show analytics‘ are not working.

Answer: If you plan on using EasyAnalyticalRecords you will want to make sure to set your UseControlNumber preference to „Don’t use,“ this will prevent broken links.

Akvizice

Planning categories

Question: What is a planning category?

Odpověď: Když plánujete jak v budoucnosti využijete svůj rozpočet, plánujete nejdřív dlouhodobě, to je přirozené.

Takže pokud si naplánujete využít 1000 USD v lednu, 1000 USD v únoru, 3000 USD v březnu a tak dále, můžete udělat to stejné se seznamem hodnot místo měsíců

Seznam s tímto názvem již existuje!

  • < 1 month

  • < 6 months

  • < 1 year

  • < 3 years

  • < 10 years

  • > 10 years

The list is meant to represent when the books acquired were published. Then you plan for it, saying: we want to spend at least 40% of our budgets on books published less than a year ago, 10% on books more than 10 years old, etc.

Upon acquiring new material, you’ll be able to select, for a given item, a value from this list in a drop down. Then, after the material has been acquired, at the end of the year, you’ll be able to compare the goals set with what’s been achieved.

Periodika

Advanced patterns

Otázka: Co je to ‚inner counter‘ v pokročilém rozhraní seriálových vzorců?

Odpověď: Myslím, že nejlépe Vám otázku zodpovím na tomto příkladu:

Zobrazit pouze předplatné

  • Datum vydání prvního čísla:

  • Číslování: Ne {X}, rok {Y}

  • Datum vydání prvního čísla:

Pro rok Y : budete chtít změnu v lednu 2011

Zobrazit/skrýt rozšířené vzorce

  • Vložit do:

  • Every : 12

  • When more than: 9999999

  • Inner counter: 3

  • Set back to: 0

  • Begins with: 2010

Year is going to change after 12 received issues from April 2010, that is in April 2011 if you don’t set inner counter. Set inner counter to 3 will say to Koha: change year after 12-3 = 9 received issues.

Inner counter says to Koha to take into account the first issues of the year, even if they are not received with Koha. If you begin with first issue of the year write nothing or 0.

Výstupy

SQL help

Question: I don’t know SQL, but I want to write a report that does X. Can you tell me how?

Answer: The Koha reports library on the Koha wiki is a good starting point and contains a lot of SQL reports shared by other libraries that can be reused and adapted.

Koha’s database schema is also publicly documented and contains helpful notes on how the columns in the various tables are used.

If you get stuck people on the community mailing lists will often be willing to help you.

Codes stored in the database

Statistics table

Question: What are the possible codes for the type field in the statistics table?

Answer:

  • localuse

    • Registruje do čtenářovy statistiky výtisk, který byl dříve vypůjčen a je nyní vrácen (kategorie typu = „X“).

  • issue

  • vrátit

  • prodloužit

  • prominuto

  • platba

  • KreditXXX

    • XXX ukládá různé druhy úvěrů na poplatky, takže dotaz, který by je měl všechny najít, by měl zahrnovat klausuli „type LIKE ‚Credit%%‘“

Reserves (holds) table

Question: What are the possible codes for the found field in the reserves and old_reserves tables?

Answer:

  • NULL: znamená, že čtenář požádal první výtisk k dispozici, a my jsme nevybrali tento výtisk

  • T = Transit: the hold is linked to an item but is in transit to the pickup library

  • W = Waiting: the hold is linked to an item, is at the pickup library, and is waiting on the hold shelf

  • F = Finished: the hold has been completed, and is done

Reports dictionary table

Question: What are the possible codes for the area field in the reports_dictionary table?

Answer:

  • 1 = Výpůjčky

  • 2 = Katalog

  • 3 = Čtenáři

  • 4 = Akvizice

  • 5 = Účty

Messages table

Question: What are the possible codes for the message_type field in the messages table?

Answer:

  • L = Pro knihovníky

  • B= Pro čtenáře

Serial table

Question: What are the possible codes for the status field in the serial table?

Answer:

  • 1 = Očekávané

  • 2 = Došlo

  • 3 = pozdě

  • 4 = Chybějící

  • 5 = Nedostupný

  • 6 =Odstranit

  • 7 = Reklamováno

  • 8 = Zastaveno

  • 21 = Circulating

  • 22 = Out for binding

  • 23 = Bound

  • Ztracený (nevrácený)

  • Chybí (vyprodáno)

  • Chybějící (poškozené)

  • Chybějící (ztracené)

Borrowers table

Question: What are the possible codes for the privacy field in the borrowers and deleted_borrowers tables?

Answer:

  • Uchovávat vše

  • Výchozí

  • Neuchovávat nic

Patron categories table

Question: What are the possible codes for the category types?

Answer:

  • A = Adult

  • C = Child

  • I = Organization

  • P = Professional

  • S = Staff

  • X = Statistical

Messaging preferences

Question: What are the possible codes in the message_attribute_id field in the borrower_message_preferences table?

Answer:

  • Pokročilé vyhledávání

  • Jednotka vypůjčena

  • Rezervace nejsou povoleny

  • Podrobnosti o jednotce

  • Vrácení není možné

Recalls table

Question: What are the possible codes for the status field in the recalls table?

Answer:

  • requested

    • A new recall request has been made and the item must be returned

  • waiting

    • A recalled item is awaiting pickup at the requester’s chosen branch

  • in_transit

    • An item has been allocated to a recall and is in transit to the requester’s chosen pickup branch

  • overdue

    • A recalled item is overdue to be returned

  • fulfilled

    • A recalled item has been checked out to the recall requester, and the recall is complete

  • expired

    • The recall was not completed before a defined expiration date or the recall requester failed to pick up their waiting recall within the pickup period

  • cancelled

    • The recall request was cancelled.

    • Only requested or overdue recalls can be cancelled.

Action logs modules and actions

Question: What are the possible modules in the action_logs table and what are the possible actions for each?

Answer:

  • ACQUISITIONS

    • Records changes to orders and baskets in acquisitions as well as budget adminitration

    • Possible actions

      • ADD_BASKET: a new basket was created

      • APPROVE_BASKET: an EDI basket was approved

      • CANCEL_ORDER: an order was cancelled

      • CLOSE_BASKET: a basket was closed

      • CREATE_FUND: a fund was created

      • CREATE_INVOICE_ADJUSTMENT: an adjustment was added to an invoice

      • CREATE_ORDER: an order was added to a basket

      • DELETE_FUND: a fund was deleted

      • DELETE_INVOICE_ADJUSTMENT: an adjustment was deleted from an invoice

      • MODIFY_BASKET: a basket was edited (adding or modifying orders)

      • MODIFY_BASKET_HEADER: a basket’s information (such as the basket name or billing place) was edited

      • MODIFY_BASKET_USERS: a basket’s users were edited

      • MODIFY_BUDGET: a budget was edited (this does not include clo)

      • MODIFY_FUND: a fund was edited

      • MODIFY_ORDER: an order was edited

      • RECEIVE_ORDER: an order was received

      • REOPEN_BASKET: a closed basket was reopened

      • UPDATE_INVOICE_ADJUSTMENT: an adjustment to an invoice was edited

    • Enabled by the AcquisitionLog system preference

  • AUTH

    • Records when patrons or staff log in to the OPAC or the staff interface

    • Possible actions

      • FAILURE: a patron or staff member tried to log in with the wrong credentials

      • SUCCESS: a patron or staff member logged in successfully

    • Enabled by the AuthFailureLog and AuthSuccessLog system preferences

  • AUTHORITIES

    • Records changes to authority records

    • Possible actions

      • ADD: authority record was created

      • DELETE: authority record was deleted

      • MODIFY: authority record was modified

    • Enabled by the AuthoritiesLog system preference

  • CATALOGUING

    • Records changes to bibliographic records and items

    • Possible actions

      • ADD: bibliographic record or item was created

      • DELETE: bibliographic record or item was deleted

      • MODIFY: bibliographic record or item was modified, or a cover image was added to the record

    • Enabled by the CataloguingLog system preference

  • CIRCULATION

  • CLAIMS

  • CRONJOBS

    • Records when a cronjob is run

    • Possible actions

      • Run: a cron job was executed

  • FINES

    • Records changes to charges

    • Possible actions

      • CREATE: a charge was added to a patron’s account (manually or automatically)

      • MODIFY: a charge was modified (forgiven)

      • UPDATE: a charge was updated (only in the case of fines that are still accruing)

      • VOID: a payment was voided

    • Enabled by the FinesLog system preference

  • HOLDS

    • Records changes to holds

    • Possible actions

      • CANCEL: a hold was cancelled

      • CREATE: a hold was placed

      • DELETE: a hold was deleted, an item on hold was checked out by the patron

      • FILL: a hold was confirmed and put aside to await pickup

      • MODIFY: a hold was modified (the priority was changed, the expiration date changed, etc.)

      • RESUME: a suspended hold was resumed

      • SUSPEND: a hold was suspended

    • Enabled by the HoldsLog system preference

  • ILL

    • Records changes to ILL requests.

    • Possible actions

      • PATRON_NOTICE: a notice was sent to a patron regarding their ILL request

      • STATUS_CHANGE: the status of an ILL request was modified

    • Enabled by the IllLog system preference.

  • MEMBERS

  • NEWS

    • Records changes to news and HTML customizations.

    • Possible actions

      • ADD: a new news item or HTML customization was created

      • DELETE: a news item or HTML customization was deleted

      • MODIFY: a news item or HTML customization was edited

    • Enabled by the NewsLog system preference.

  • NOTICES

  • RECALLS

    • Records changes to recalls

    • Possible actions

      • CANCEL: a recall was cancelled

      • EXPIRE: a recall expired

      • FILL: a recall was filled (confirmed and set aside to wait for pickup)

      • OVERDUE: the status of a recall was set to ‚overdue‘

    • Enabled by the RecallsLog system preference

  • REPORTS

    • Records changes to reports

    • Possible actions

      • ADD: a new report was created

      • DELETE: a report was deleted

      • MODIFY: a report was edited

    • Enabled by the ReportsLog system preference

  • SEARCH_ENGINE

    • Records changes to mappings

    • Possible actions

      • EDIT_MAPPINGS: mappings were modified (edited, deleted)

      • RESET_MAPPINGS: mappings were reset to the original configuration

  • SERIAL

  • SYSTEMPREFERENCE

Runtime parameters

Question: Is there a way to filter my custom SQL reports before they run?

Answer: If you want to make your reports easy to reuse with different filters and date ranges, you can add runtime parameters to your query. Runtime parameters basically make a filter appear before the report is run.

See report writing tips on runtime parameters.

Hledání

Wildcard searching

Question:What is the difference between a keyword search using the ‚*‘ (asterisk) versus a keyword search using the ‚%‘ (percent)? Both work in the catalog, but return different sets. Why?

Answer: A wildcard is a character (*,?,%,.) that can be used to represent one or more characters in a word. Two of the wildcard characters that can be used in Koha searches are the asterisk (‘*‘) and the percent sign (‚%‘). However, these two characters act differently when used in searching.

The ‚*‘ is going to force a more exact search of the first few characters you enter prior to the ‚*‘. The asterisk will allow for an infinite number of characters in the search as long as the first few characters designated by your search remain the same. For example, searching for authors using the term, Smi*, will return a list that may include Smith, Smithers, Smithfield, Smiley, etc depending on the authors in your database.

The ‚%‘ will treat the words you enter in the terms of „is like“. So a search of Smi% will search for words like Smi. This results in a much more varied results list. For example, a search on Smi% will return a list containing Smothers, Smith, Smelley, Smithfield and many others depending on what is your database.

The bottom line in searching with wildcards: ‚*‘ is more exact while ‚%‘ searches for similar terms.

Title searching

Question: Why does my Zebra title search for ‚Help‘ not turn up ‚The help‘ in the first pages of results?

Answer: In general, the more terms you enter, the better your results will be. Koha doesn’t use stop words, so searching for „the“ and „an“ will work just fine. So „the help“ should bring better results than just a title search for help. Also using „Title, phrase“ would further improve the results as it means that these terms have to appear in this sequence and with no other terms in between.

Some system preferences are known to affect relevancy ranking negatively. These are QueryAutoTruncate and UseICUStyleQuotes.

Note: If multiple results have the same relevancy score, they will be sorted by biblionumber as second criteria.

Reset the Zebra index

Pro resetování jak autoritního tak bibliografického indexu Zebry spusťte následující příkazy.

$ zebraidx -c /etc/koha/zebradb/zebra-authorities-dom.cfg -g iso2709 -d authorities init
$ zebraidx -c /etc/koha/zebradb/zebra-biblios.cfg -g iso2709 -d biblios init

Pokud jste Kohu nainstalovali z balíčků, potom pro resetování indexů Zebry použijte tyto příkazy:

$ sudo zebraidx -c /etc/koha/sites/YOURLIBRARY/zebra-authorities-dom.cfg  -g iso2709 -d authorities init
$ sudo zebraidx -c /etc/koha/sites/YOURLIBRARY/zebra-biblios.cfg  -g iso2709 -d biblios init

Přičemž text YOURLIBRARY nahraďte názvem instance.

Rozšířený obsah

Amazon

All Amazon content

Question: I have all of the Amazon preferences turned on and have entered both of my keys, but none of the content appears in my system, why is that?

Answer: Amazon’s API checks your server time on all requests and if your server time is not set properly requests will be denied. To resolve this issue be sure to set your system time appropriately. Once that change in made Amazon content should appear immediately.

On Debian the the command is date -s „2010-06-30 17:21“ (with the proper date and time for your timezone).

Amazon also requires an ISBN for displaying book covers - make sure that you have the correct ISBN for your title. If you are having trouble with a book that seems like it should have a cover but doesn’t turn one up, give it a try with the 10 digit ISBN in the first 020a. If you have a 10 digit and it’s not turning up, try with the 13 digit ISBN in the first 020a.

Server administration

Bcrypt settings

Question: How do I configure bcrypt_settings in the Koha configuration file?

Answer: You need to generate a key and put it in the koha-conf.xml file.

The following command will generate one:

% htpasswd -bnBC 10 "" password | tr -d ':\n' | sed 's/$2y/$2a/'

Then edit $KOHA_CONF and paste the generated key into <bcrypt_settings>. If that section does not exist, add it before the end of the config section (</config) It should look something like:

<bcrypt_settings>$2a$10$PfdrEBdRcL2MZlEtKueyLegxI6zg735jD07GRnc1bt.N/ZYMvBAB2</bcrypt_settings>

Varování

Do not, under any circumstances, copy the example above in your own configuration! A key is like a password: using one that has been posted online is the opposite of secure. Instead, use the command to generate your own key.

Finally, restart memcached then plack (alias restart_all)

Making Z39.50 target public

Question: How can I configure Zebra to make my database searchable via Z39.50?

Answer: Edit the KOHA_CONF file that your Koha is using. Uncomment the publicserver line like:

<!– <listen id=“publicserver“ >tcp:@:9999</listen> –>

to be:

<listen id=“publicserver“ >tcp:@:9999</listen>

Then restart zebasrv and connect on the port specified (9999).

Shelving location authorized values

Question: When editing an item, the new shelving location I created is not showing up by default in the items where I assigned it to.

Answer: One possible reason is that you created the location in the LOC authorized value category with the code ‚‘ or 0 (zero). This will be treated as ‚no location‘ and not display correctly.

Why do I need authorized values?

Question: Why would I want to define authorized values for MARC tags?

Answer: Authorized values create a ‚controlled vocabulary‘ for your staff. As an example, let us assume that your Koha installation is used by several libraries, and you use MARC 21. You might want to restrict the 850a MARC subfield to the institution codes for just those libraries. In that case, you could define an authorized values category (perhaps called „INST“) and enter the institution codes as the authorized values for that category.

Poznámka

Koha automatically sets up authorized value categories for your item types and branch codes, and you can link these authorized values to MARC subfields when you set up your MARC tag structure.

How do I clean up the sessions table?

Question: Is there a periodic job that can be run to cull old sessions from the table? We don’t want to backup all the useless session data every night.

Answer: You can regularly run the cleanup database cron job.

Or just before doing a backup command (mysqldump), you can truncate session table:

mysql -u<kohauser -p<password <koha-db-name -e 'TRUNCATE TABLE sessions'

q- Dřevotříska

Barcode scanners

Question: What barcode scanners have been known to work with Koha?

Answer: The simple rule of thumb is: does it act like a keyboard device? If so, it will work. (i.e. can you take the scanner, scan a barcode and have it show up in a text editor.)

The main points to check are that it connects to your PC conveniently (can be USB or „keyboard wedge“ which means it connects in line with the keyboard, which is useful with older computers), and that it scans the barcode type that you are using.

It is a good idea to test some ‚used‘ barcodes if you have any, to see whether the scanner can read scuffed or slightly wrinkled ones successfully. Most scanners are capable of reading several barcode types - there are many, and the specification should list the ones it can read. You may need to adjust settings slightly, such as prefix and suffix characters, or whether you want to send an ‚enter‘ character or not.

One more tip - some can be set ‚always on‘ and may come with a stand, some have triggers under the handle, some have buttons on top, some are held like a pen. Think about the staff working with the hardware before choosing, as a button in the wrong place can be very awkward to use.

Tiskárny

Plánovat podle knihoven

General rule of thumb here is that if you can print with the printer from your browser, it will work with Koha.

  • Tisk potvrzení na páskové tiskárně

  • Star Micronics printer (exact model unknown) with a generic/plain text driver.

  • Star SP2000 (Nelsonville)

  • Star TSP-100 futurePRINT (Geauga)

    • „I know there have been a lot of questions on receipt printers so I thought I’d pass on my findings. We have been testing the Star TSP-100 futurePRINT. I found this print to be VERY easy to configure for Koha. I was even able to customize the print job by adding our system logo (a .gif) to the top of every receipt. Also with a bitmap created in Paint was able to add a message at the bottom of each receipt with the contact information, hours and website for the library that the materials were checked out at.“

  • Epson TM 88 IIIP thermal receipt printers

  • Epson TM-T88IV

  • 1x1 labels using a Dymolabelwriter printer

Braille support

Question: Are there any braille embossers or printers which have inbuilt braille converters and are accessible within the UNIX environment?

Answer: You may want to look into BRLTTY.

Další informace