Adquisiciones

El módulo de adquisiciones de Koha proporciona una forma para que la biblioteca haga los pedidos a sus proveedores y gestione los presupuestos de adquisiciones.

  • Get there: More > Acquisitions

Configuración

Before using the Acquisitions module you will want to make sure that you have completed all of the set up.

First, set your acquisitions system preferences and acquisitions administration to match your library’s workflow. Before setting your EDI accounts and Biblioteca EANs you will need to have entered your vendors.

En la página principal de adquisiciones verá la relación de las partidas presupuestarias de su biblioteca.

image781

Nota

If the total line is confusing for the funds you have set up you can hide it by adding

#funds_total {display:none;}

a la preferencia IntranetUserCSS.

To see all active funds you can click the checkbox next to “Show active and inactive” above the funds table.

Para ver el historial de todas las órdenes de un fondo puede hacer clic en el importe.

image782

Learn more in the Budget/fund tracking section of this manual.

Proveedores

Before any orders can be placed you must first enter at least one vendor.

Add a vendor

To add a vendor click the “New vendor” button on the Acquisitions page

image783

El formulario agregar proveedor se divide en tres partes

  • The first section is for basic information about the vendor

    image784

    • Of these fields, only the vendor name is required, the rest of the information should be added to help with generating claim letters and invoices

  • The second section is for information regarding your contact at the vendor’s office

    image785

    • Ninguno de estos campos son obligatorios, debería introducirse únicamente si usted quiere llevar un registro de la información de contacto dentro de Koha

      • Primary acquisitions contact: check this box if this person is your primary contact regarding acquisitions from this vendor

      • Primary serials contact: check this box if this person is your primary contact regarding serial acquisitions from this vendor

      • Contact when ordering? check this box if you want to be able to send your orders by email directly to this person

      • Contact about late orders? check this box if you want to be able to send your acquisitions claims by email directly to this person

      • Contact about late issues? check this box if you want to be able to send your serials claims by email directly to this person

    • You can add more than one contact per vendor by clicking on the “Add another contact” button

  • La última sección es para información de facturación

    image786

    • Para poder hacer un pedido a un proveedor éste debe estar “Activo”

    • For list prices and invoice prices choose the currency

    • If your library is charged tax mark your tax number as registered

    • Indique si los precios de lista y/o precios de facturas incluyen el impuesto

    • Si el proveedor ofrece un descuento, introduzca el procentaje en el campo “Descuento”

      • Usted pueda introducir descuentos específicos del ítem al hacer un pedido

    • Introduzca la tasa del impuesto si a su biblioteca le cargan impuestos a los pedidos

    • Si usted sabe cuanto tiempo suelen tardar en llegar los pedidos de este proveedor puede introducir un tiempo de entrega. Esto permitirá a Koha estimar cuando llegarán los pedidos a su biblioteca en el informe de pedidos retrasados.

    • Las notas son para uso interno

View/edit a vendor

To view a vendor’s information page you must search for the vendor from the Acquisitions home page. Your search can be for any part of the vendor’s name:

image787

De los resultados, haga clic en el nombre del proveedor que desee ver o editar

image788

Para realizar cambios al vendedor o proveedor, simplemente haga clic en el botón «Editar»

Si el proveedor no tiene cestas asociadas el botón “Borrar” igualmente será visible, permitiendo borrarlo.

image789

Vendor contracts

Puede definir contratos (con fecha de inicio y final) y asociarlos a un proveedor. Esto es usado para que al final del año pueda ver cuanto gastó en un contrato específico con un proveedor. En algunos lugares, los contratos se configuran con un monto mínimo o máximo anual.

Add a contract

At the top of a vendor information Page, you will see a “New contract” button.

image790

El formulario de contrato le pedirá cierta información muy básica sobre el contrato

image791

Importante

Importante: Usted no será capaz de entrar en un contrato de forma retrospectiva, la fecha de finalización no debe ser antes de la fecha de hoy.

Una vez que el contrato se guarda aparecerá debajo de la información del proveedor.

image792

Habrá también una opción cuando se crea una cesta

image793

Managing purchase suggestions

Purchase suggestions can be generated in one of two ways. You can create suggestions via the staff client either for the library or on the patron’s behalf from their record. Depending on your settings in the sugerencia system preference, patrons may also be able to make purchase suggestions via the OPAC.

Nota

You need to be logged in as a staff member with the suggestions_manage acquisitions permission in order to view and work with purchase suggestions.

When a suggestion is waiting for library review, it will appear on the Acquisitions home page next to the vendor search.

image794

También aparecerá en el panel principal del personal bajo las etiquetas de módulo:

image795

Haciendo clic en “Administrar sugerencias” lo llevará a la herramienta de administración de sugerencias. Si no hay sugerencias pendientes puede acceder la herramienta haciendo clic en el enlace “Administrar sugerencias” en el menú a la izquierda de la página de Adquisiciones.

image796

Sus sugerencias serán ordenadas en varias categorías: Aceptadas, Pendientes, Revisadas y/o Rechazadas. Cada propuesta aceptada o rechazada mostrará el nombre del bibliotecario que administró la sugerencia y la razón que dio para aceptar o rechazar la misma (encontrada en “Estado”).

Una sugerencia “aceptada” es la que usted ha marcado como «Aceptada» mediante el siguiente formulario de sugerencias. Una sugerencia “Pendiente” es la que está en espera de una acción por parte de la biblioteca. Una sugerencia “Revisada” es la marcada como “Revisada” utilizando el formulario antes de las sugerencias. Una sugerencia “Ordenada” es la que se ha ordenado a través de la “Sugerencia de compra” enlazada en su cesta. Una sugerencia “Rechazada” es la que se ha marcado como “Rechazada” mediante el formulario debajo de la lista de sugerencias.

Para bibliotecas con muchas sugerencias, existen filtros en el lado izquierdo de la página de Administración de sugerencias para asistirlo en limitar en número de títulos mostrados en pantalla.

image797

Haciendo clic en los encabezados azules expandirá las opciones de filtrado y haciendo clic en “[limpiar]” eliminará los filtros y mostrará todas la sugerencias.

Nota

La página de sugerencias se limitará automáticamente a sugerencias para su biblioteca. Para ver información de todas (u otras) bibliotecas haga clic en el filtro “Información de adquisición” y cambie la biblioteca.

image798

Cuando revise sugerencias “Pendientes” puede elegir marcar la casilla próxima al ítem que quiere aprobar/rechazar y entonces elegir el estado y la razón de su selección. Puede además elegir eliminar completamente la sugerencia marcando la casilla “Eliminar seleccionada”.

image799

Otra opción para bibliotecas con listas de sugerencias largas es aprobarlas o rechazarlas una por una haciendo click en el título de la sugerencia para abrir un resumen de la misma, incluyendo la información de si el ítem fue adquirido.

image800

Clicking “edit” to the right of the suggested title or at the top of the suggestion detail page will open a suggestion editing page.

image801

Desde este formulario puede editar las sugerencias (agregando más detalles o actualizando información incorrecta provista por el usuario). También puede aceptar o rechazar la sugerencia individualmente.

  • Marcar una consulta como “Pendiente” la moverá nuevamente a la pestaña “Pendiente”.

Las razones para aceptar y rechazar sugerencias son definidos por el valor autorizado SUGGEST.

image802

Si usted elige “Otros…” como motivo se le pedirá que ingrese su motivo en un cuadro de texto. Haciendo clic en “Cancelar” a la derecha del cuadro traerá nuevamente el menú desplegable con las razones autorizadas.

image803

You can also assign this suggestion to a fund.

image1280

This edit can trigger a notice (defined in the Notices & slips tool with the TO_PROCESS notice) to the fund owner that there is a suggestion ready for them to manage if you have turned on the cron job to generate these notices.

Once you have clicked “Submit” the suggestion will be moved to the matching tab. The status will also be updated on the patron’s account in the OPAC and an email notice will be sent to the patron using the template that matches the status you have chosen.

image804

Placing orders

Para hacer un pedido debe primero buscar al proveedor o librería al cual desea enviar el pedido.

Importante

If you are planning on using EDIFACT to submit your order you will need to first set up your library’s EDI accounts and EANs.

Crear una cesta

Nota

If you’re using EDI for ordering you will want to download your order record from your vendor before starting the process in Koha.

Para crear una cesta usted dispone de varias opciones en la página de resultados de búsqueda de proveedores:

image805

Para agregar usuarios a la lista haga clic en el botón “Agregar usuarios” a la derecha del nombre de la lista.

Nota

You can also add to an existing basket by clicking the arrow next to the “View” button at the far right of each basket’s information in the results table, and choosing “Add to basket”.

image1406

Luego de hacer clic en “Recibir envío” se le pedirá ingresar el numero de remito del vendedor y la fecha de recepción.

image806

  • Al añadir una cesta deseará darle un nombre para identificarla posteriormente

  • Enter in the billing place and delivery place (this will default the library you’re logged in at)

  • Si desea cambiar el proveedor al cual está ordenando puede utilizar el menú desplegable Proveedor

  • Los campos de notas son opcionales y pueden contener cualquier tipo de información.

  • If you’re ordering standing items (items which arrive regularly) then you will want to check the “Orders are standing” box for this basket.

    • Note that any one basket cannot contain both firm and standing orders.

  • You can choose to create items either upon placing the order, upon receiving the order, or upon cataloging the item. If you choose an option other than the default, it will apply only to this basket. The default is set by the AcqCreateItem system preference.

Si tiene contratos agregados al proveedor al que usted está haciendo el pedido, también tendrá la opción de elegir bajo qué contrato está haciendo el pedido.

image807

When finished, click “Save”.

image808

Once your basket is created, click on “Add to basket” you are presented with several options for adding items to the order.

image1407

Order from an existing record

  • Si está pidiendo otra copia de un ítem existente, puede simplemente buscar el registro en su sistema.

    image809

    • Desde los resultados, haga clic en “Pedir” para ir al formulario de pedido.

      image810

      • Todos los detalles asociados con el ítem se listarán bajo “Detalles de catalogación.”

Order from a purchase suggestion

  • If you allow patrons to make purchase suggestions (learn more in the managing purchase suggestions section of this manual), then you can place orders from those suggestions. In order to keep track of suggestions that have been ordered and received you must place the order using this link.

    Importante

    Suggestions must be accepted before you can order them.

    image811

    • De los resultados, haga clic en “Hacer pedido” junto al ítem que desea pedir y se irá al formulario de pedido incluyendo el enlace a la sugerencia

      image812

      • From this form you can make changes to the catalog details if necessary.

      • Cuando el ejemplar aparezca en su cesta incluirá un enlace a la sugerencia.

        image813

    • Orders added to the basket in this way will notify the patron via email that their suggestion has been ordered (with the “ORDERED” notice in Tools > Notices & slips) and will update the patron’s “your purchase suggestions” page in the OPAC.

Order from a serial subscription

  • Si está utilizando el módulo de Publicaciones periódicas puede vincular la información de pedido de la suscripción a el módulo de adquisiciones eligiendo el pedido “Desde una suscripción”

    • Después de dar clic en en enlace del pedido usted será llevado a la página de búsqueda, de modo que, le ayudará a encontrar su suscripción

      image814

    • Sus resultados aparecerán a la derecha del formulario y cada suscripción tendrán un enlace de “Pedido” a la derecha

      image815

    • Al hacer clic en “Orden” traerá la información de la suscripción en el formulario de pedidos y sin la sección «Agregar ítem» ya que solamente se está pidiendo una suscripción y un ítem no es necesario

      image816

Order from a new (empty) record

  • To order from a record that can’t be found anywhere else, choose the “From a new (empty) record” option.

    image817

    • Se le presentará con un formulario en blanco para rellenar con todos los datos necesarios sobre el ítem que está pidiendo.

      Nota

      If the default form does not have catalog details fields necessary to place an order, enable the UseACQFrameworkForBiblioRecords preference which will allow the ACQ MARC framework to customize the display of fields when ordering.

Duplicate orders (order from existing orders)

  • You can duplicate an existing order line by choosing the “From existing orders (copy)” option.

    • You will be presented with a search form to search your existing orders.

      image1408

    • Check the boxes next to the order(s) you want to duplicate.

      image1409

Order from an external source

  • Si desea buscar en otras bibliotecas para comprar un ítem, use la opción “De una fuente externa”, que le permitirá hacer un pedido a partir de un registro MARC encontrado por una búsqueda Z39.50.

    image818

    • From the results, click the “Order” button next to the item you want to purchase.

      image819

    • Si el ítem que usted está pidiendo de una fuente externa parece ser un duplicado, Koha le advertirá y le dará opciones sobre cómo proceder.

      image820

      • From the warning, you can choose to order another copy on the existing bibliographic record, create a new bibliographic record, or cancel your order of this item.

    • En el formulario de pedido que aparece, no podrá editar los detalles del catálogo.

      image821

Order from a new file

  • If your vendor sent you a record file (a .mrc file for example), you can add orders using the records in that file. Choose the “From a new file” option.

    Nota

    Note that you need the stage_marc_import tool permission in order to be able order from a new file.

    • You will be taken to the Stage MARC records for import tool. Stage your file as described in that section.

    • Once the files are staged, you can click on the “Add staged files to basket” button.

      image1410

    • Next to each title is a checkbox, check the items you would like to order, or choose “Select all” at the top. Depending on your settings in the MarcFieldsToOrder preference, Koha will populate the next screen with with the relevant Quantity, Price, Fund, Statistic 1, and Statistic 2 found within the staged file.

      image1282

    • In the “Item information” tab you can enter information that will be added to every ordered item such as item type, collection code and not for loan status.

      image1283

    • If no information is imported in the fund information from the MARC with the MarcFieldsToOrder preference, the “Default accounting details” tab can be used to apply values related to the accounting.

      image1284

Order from a staged file

  • This option is the same as the previous one, but in this case, your file has already been staged. Whether you choose to “order from a new file” or “order from a staged file” will depend on your acquisitions workflow or your permissions.

    • Once you click on “From a staged file”, you will get a list of all the staged files in your system.

      image822

    • From the list of files you are presented with, click on the “Add orders” button to add the records in the staged file to your order.

      image1281

    • Next to each title is a checkbox, check the items you would like to order, or choose “Select all” at the top. Depending on your settings in the MarcFieldsToOrder preference, Koha will populate the next screen with with the relevant Quantity, Price, Fund, Statistic 1, and Statistic 2 found within the staged file.

      image1282

    • In the “Item information” tab you can enter information that will be added to every ordered item such as item type, collection code and not for loan status.

      image1283

    • If no information is imported in the fund information from the MARC with the MarcFieldsToOrder preference, the “Default accounting details” tab can be used to apply values related to the accounting.

      image1284

Order from titles with highest hold ratios

  • El última opción para hacer pedidos es hacerlo desde una lista de títulos con máxima tasa de reserva.

    • This option will take you to the holds ratio report where you can find items with a high hold ratio and order additional copies. Next to each title will be a button with the number of items to order, click that and it will add the item to your basket.

      image1285

With any of the above ordering options you’re presented with an option to notify patrons of the new item when it’s received. The contents of that notification can be edited in the Notices & slips tool and will have the code of ACQ_NOTIF_ON_RECEIV. In the “Patrons” section you will see an option to “Add user”. Click that button to add patrons who will be notified of the new issue.

Cambios de los usuarios

  • In the window that pops up search for the patrons you’d like to notify and click “Add”

    image1411

  • Una vez que hayas terminado puedes cerrar la ventana y podrás ver la lista de usuarios en la sección “Usuarios”

    image1286

After bringing in the record information (for all order methods except for the staged files), if your AcqCreateItem system preference is set to add an item when ordering you will enter the item information next. You need to fill out at least one item record and then click the “Add item” button at the bottom left of the item form.

image823

Luego de hacer clic en agregar el ítem aparecerá encima del formulario y, entonces, podrá ingresar su siguiente ítem de la misma forma (si pidió más de uno).

image824

If you are ordering several items, you can click on the “Add multiple items” instead of adding them one by one. This will ask you how many items you want to add. Simply enter that number in the box and click on “Add”.

image1412

Una vez que haya ingresado la información sobre el ítem, es necesario ingresar la información contable.

image825

  • La cantidad es completada por el número de ítems que añadió al pedido de arriba.

    • Importante

      If the item is created upon orderinf, you will not be able to edit the quantity manually, you must click “Add item” below the item form to add as many items as you’re ordering.

  • The list of funds is populated by the funds you have assigned in the Acquisitions administration area.

  • The currency pull down will have the currencies you set up in the Acquisitions administration area.

  • El precio del proveedor es el precio antes de aplicar impuestos o descuentos.

  • Si el precio es incierto, marque la casilla de precios inciertos.

    Nota

    Una cesta con al menos un precio incierto no puede cerrarse.

  • If you are charged sales tax, choose that from the “Tax rate” field. This field is populated by the gist system preference.

  • Ingrese el porcentaje de descuento que recibe en este pedido, una vez ingresado, pulse Tab y Koha rellenará el resto de los campos de costo más abajo.

  • Retail price is the recommended retail price (RRP), the price set by the publisher or the manufacturer as a recommendation to booksellers.

  • Replacement cost is the price it will cost to replace the item. This is the price charged to the user when an item is declared lost (if the WhenLostChargeReplacementFee system preference is set to “Charge”).

  • Budgeted cost is the amount that will be removed from the “spent” budget. Whether this number includes or excludes taxes will depend on the “List price” setting for your vendor.

  • Total is the budgeted cost multiplied by the quantity of items ordered.

  • You can add an internal note. This will only appear in the acquisitions module and in the staff interface catalog, under the “Acquisitions details” tab in the detailed record.

  • You can also add a vendor note. This will appear in the acquisitions module as well as on the order when exported as CSV.

  • If you added statistical categories when creating the Fund, those values will appear in the two statistics fields.

Once you have filled in all of the fields click “Save” to add the item to your basket. If your price goes over the amount available in the fund you will be presented with a confirmation.

image826

The confirmation warning will allow you order past your fund amount if you so choose.

Una vez que un ítem se agrega a la cesta se le presentará un resumen de la bolsa.

image827

Desde aquí, puede editar o remover los ejemplares que haya agregado.

  • Choosing to “Cancel the order” will delete the order line but leave the record in the catalog.

  • Choosing to “Cancel order and delete catalog record” removes both the order line and the record in the catalog.

    • El registro catalogado no siempre puede eliminarse. Podrá ver notas explicando por que.

      image829

On the summary page, you also have the several option through the buttons at the top of the basket header.

image830

  • Edit basket: edit the basket information, such as the name or the billing place.

  • Delete this basket: if the basket is empty, you will get a simple confirmation message before deleting the basket. If the basket contains orders, you will get a confirmation message with several options.

    image1413

    • Delete basket and orders: this will delete the basket, cancel the orders, refund the used funds, and delete the items (ordered or received).

    • Delete basket, orders, and records: this will delete all of the above plus the bibliographic records associated with the orders (except the ones which can’t be deleted because they have remaining items, orders or subscriptions attached).

  • Close this basket: closing the basket will enable you to add it to a basket group (this is optional) and receive its items.

  • Export as CSV: this will create a CSV file with all your orders from this basket. You can add several CSV profiles options by going to the CSV profiles tool.

  • E-mail order: this will send the order information to your contact for this vendor. Make sure your contact has a email address in the vendor profile.

If you’re using EDI for your order you can click the “Create EDIFACT order” button when you’re done to send the file to the vendor and close the basket.

image1287

Una vez que esté seguro que su cesta está completa, puede hacer clic en “Cerrar esta cesta” para indicar que esta cesta se ha completado y ha sido enviada al proveedor.

image835

Importante

You must close the basket to be able to receive items when they arrive. Only items in closed baskets will show as ready to receive.

If you have your BasketConfirmations preference set to show a confirmation, you will be asked if you are sure about closing the basket.

image836

When closing the basket you can choose to add the basket to a group for easy printing and retrieval. If you check the box to “Attach this basket to a new basket group” you will be brought to the group list where you can export a PDF of the order.

image832

Importante

A basket with at least one item marked as “uncertain price” will not be allowed to be closed.

image833

Clicking the “Uncertain prices” button will call up a list of items with uncertain prices to quick editing. From that list, you can quickly edit the items by entering new prices and quantities.

image834

Importante

The Uncertain prices page is independent of the basket. It is linked to the vendor so you will see all items on order with uncertain prices for that vendor.

Once your order is entered you can search for it through acquisitions or view the information on the biblio detail page in the staff client (if the AcquisitionDetails preference is set to “Display).

image1288

Crear grupo de cestas

A basket group is simply a group of baskets. In some libraries, you have several staff members that create baskets, and, at the end of a period of time, someone then groups them together to send to the vendor in bulk. That said, it is possible to have one basket in a basket group, or no basket groups at all if that’s the workflow used in your library.

To create a basket group, go to the vendor detail page and click on the “Basket groups” tab on the left side.

image788

image1414

Click on the “New basket group” button.

image1415

  • Basket group name: this is the name the basket group will go by in Koha

  • Billing place: this is the billing address that will appear on the basket group order

  • Delivery place: pick a library where these orders should be sent, this will appear on the basket group order under delivery address You can also enter a different address

  • Delivery comment: this comment will appear on the basket group order

  • Close basket group: if you know that once you’re done with this basket group, you will not be modifying it anymore, you can close it right away

Drag the ungrouped baskets to the “Baskets in this group” box to add baskets to the basket group.

image1416

Click on “Save” to finish creating your basket.

From there, you can export your order as a PDF file to send to your vendor.

image838

Receiving orders

Importante

You must close the basket to be able to receive items when they arrive. Only items in closed baskets will show as ready to receive.

Los pedidos se pueden recibir en la página de información del proveedor

image839

o en la página de resultados de búsqueda del proveedor

image840

After clicking “Receive shipment” you will be asked to enter a vendor invoice number, a shipment received date, a shipping cost and a fund to subtract that shipping amount from.

image841

La página de recepción listará todos los ítems todavía en pedido con el proveedor, independientemente de que cesta es el ítem.

image842

Nota

If you have a lot of orders, you can filter the orders using the “Filter” box on the left, the “Search” box just above the table, of the filter boxes at the top of each table column.

image1417

image1418

You could, for example, scan the ISBN of the book you are receiving in the filter box and the table will only show the corresponding orders.

Just make sure to clear the filter boxes when you’re done, otherwise, the other items won’t appear.

Para recibir un ítem específico, haga clic en el enlace “Recibir” a la derecha del ítem.

image843

Depending on when you chose to create the item (either in the AcqCreateItem system preference, or upon creating your basket), the form will look slightly different.

If you chose to create your item when placing the order, you will have your item information on the left side and financial information on the right side.

image1419

You can check the box next to the item to receive it, or fill out the “Quantity received” field on the left side.

Note You can choose to mark only part of the order as received if he vendor didn’t send your entire order by checking only the boxes next to the items on the left that you want to receive or by entering the right amount in the “Quantity received” field.

You can edit the item if needed by clicking on the “Edit” link. This will allow you to enter in accurate call numbers and barcodes if you’d like to do that at the point of receipt.

You can also alter the cost information (replacement cost and actual cost). The values you enter there will automatically populate the item record by filling in subfield v (Cost, replacement price) and subfield g (Cost, normal purchase price) on the item record after saving.

If you chose to create your item when receiving the order, you will see the item creation form on the left side and the financial information on the right side.

image1420

Important You must fill out the item form and click on “Add item” or “Add multiple items” in order to receive the order. You will not be able to simply change the “Quantity received” amount.

You can alter the cost information (replacement cost and actual cost). The values you enter there will automatically populate the item record by filling in subfield v (Cost, replacement price) and subfield g (Cost, normal purchase price) on the item record after saving.

Finally, if you chose to create your item when cataloging the record, you will only see the financial information on the right.

image843

You can alter the cost information (replacement cost and actual cost).

Note The financial information will not be transferred to the item if the item is created when cataloging.

Once you have made any changes necessary (to the order and/or items, click “Save” to mark the item(s) as received.

image845

Nota

Esta preferencia es utilizada en conjunto con la preferencia AcqItemSetSubfieldsWhenReceived. Si usted tiene configurado el sistema a entrar valores por defecto cuando usted recibe, usted querrá que esos valores se reviertan cuando la recepción se cancela. Esta preferencia le permite hacer eso.

Cuando haya finalizado de recibir ítems puede navegar fuera de esta página o hacer clic en el botón “Finalizar recepción” al fondo de la pantalla.

Received orders will have “(rcvd)” before the title in the basket view.

image850

Note When all the orders in a basket have been received, the basket will be removed from the list of baskets for that vendor. You can click “Show all baskets” to view the inactive baskets.

image1421

image1422

Transferring orders

If the item is no longer available from this vendor you can transfer the order to another vendor’s basket by clicking the “Transfer” link to the right of the title. This will pop up a vendor search box.

image846

De los resultados puede elegir el enlace “Importar” a la derecha del registro que desea agregar a Koha

image847

You will then be presented with the open baskets for that vendor to choose from. To move the item simply click “Choose” to the right of the basket you would like to add the item to.

image848

Una vez que el archivo es subido se presenta un mensaje de confirmación.

image849

You will see transferred orders when viewing the basket.

image850

Cancelling orders

If the item cannot be found anywhere you can cancel the order by clicking “Delete order” to the far right. This will prompt you to enter your reason and confirm cancellation.

image1289

You will also see that the item is cancelled if you view the basket.

image850

Nota

Whilst it is possible to re-open your basket, cancel one or more orders and re-close the basket, this is not recommended. This procedure will update the “basket closed” date, which in turn will cause your “late order” calculations to be incorrect.

Facturas

Cuando se recibe pedidos se generan facturas. Las facturas pueden buscarse haciendo clic en “Facturas” a la izquierda de la página de Adquisiciones.

image851

Luego de buscar, sus resultados aparecerán a la derecha de las opciones de búsqueda.

image852

From the “Actions” button, you can click the “Details” link to see the full invoice or “Close” to note that the invoice is closed/paid for.

image853

In the Adjustments section, you can add adjustments to your invoices. These adjustments can be for adjusting the price that is offset by rounding or adding a credit to the invoice, for example.

image1371

  • Click on “Add an adjustment”

  • Enter the amount of the adjustment

  • Choose a reason, if needed

    Nota

    The reasons are authorized values. Use the category ADJ_REASON to add custom reasons for adjustments.

  • Enter a note, if needed

  • Choose the fund from which the adjustment amount should be taken

  • If “Encumber while invoice open” is checked, the amount of the adjustment will be taken out of the fund immediately. If it isn’t checked, the amount will be subtracted only when the invoice is closed.

  • Click on “Update adjustments” to save your adjustments

If you need to change the adjustment afterwards, you can do so in the table and click on “Update adjustments”.

image1372

Attaching files to invoices

If you’re allowing the uploading of acquisitions files with the AcqEnableFiles preference you will see the option to manage invoice files next to the link to “Go to receipt page”

image1290

To see or attach new files click the “Manage invoice files” link

image854

From here you can find a file to upload and/or see the files you have already attached.

image855

Merging two invoices

From the invoice search results you can also merge together two invoices should you need to. Simply click the checkbox to the left of the invoices you would like to merge and click the “Merge selected invoices” button at the bottom of the page. You will be presented with a confirmation screen:

image856

Click on the row of the invoice number you would like to keep and it will be highlighted in yellow. Enter any different billing information in the fields provided and click “Merge”. The two invoices will become one.

Claims and late orders

Si ha introducido una dirección de correo electrónico para los proveedores en su sistema entonces podrá enviar correos electrónicos de reclamaciones cuando un pedido se retrasa. Antes de poder enviar las reclamaciones tendrá que configurar un aviso de reclamación de adquisiciones.

Upon clicking on the link to “Late orders” from the Acquisitions page you will be presented with a series of filter options on the left hand side. These filters will be applied only closed baskets.

image857

Nota

El desplegable de proveedor solo mostrará los proveedores con cestas cerradas tarde.

Una vez que filtre sus pedidos para mostrarle lo que se considera retrasado se le presentará una lista de estos ítems.

image858

To the right of each late title you will be see a checkbox. Check off the ones you want a claim letter sent to and click “Claim order” at the bottom right of the list. This will automatically send an email to the vendor at the email address you have on file.

Nota

The estimated delivery date is based on the delivery time value entered on the vendor record.

If you would rather use a different acquisition claim letter (other than the default) you can create that in the notices module and choose it from the menu above the list of late items.

image859

Acquisition searches

At the top of the various Acquisition pages there is a quick search box where you can perform either a Vendor search or an Order search.

image860

In the Vendor search you can enter any part of the vendor name to get results.

image861

Using the Orders search you can search for items that have been ordered with or without the vendor.

image862

Puede introducir información en uno o ambos campos y puede ingresar cualquier parte del título y/o nombre de proveedor.

image863

Hacer clic en el signo más (+) a la derecha de la caja de búsqueda de proveedor la expandirá y le permitirá buscar por campos adicionales.

image864

Clicking Advanced search to the right of the search button will give you all of the order search options available.

image865

Budget/fund tracking

On the main acquisitions page there will be a table showing you all of your active funds and a breakdown of what has been ordered or spent against them.

image866

Clicking on the linked amounts under spent or ordered will show you a summary of the titles ordered/received on that budget.

image867

EDI process

Previous sections explain all ordering options, this section pulls out the parts related to EDI or EDIFACT ordering to help those who are only using EDI for ordering.

Importante

Koha uses the EDIFACT standard not the X12 standard for electronic ordering.

EDI questions for vendors

You will want to gather the following information from your vendors before beginning the set up process in Koha.

EDI accounts: This is the basic connection information for your vendor. This will be used to fill in the :ref:`EDI accounts` section.

  • Proveedor: El nombre del proveedor

  • Description: A short description if additional explanation is needed ( especially if you have multiple accounts for one vendor ).

  • Transport: Does the vendor transmit EDI files via FTP, SFTP, or something else the requires special processing?

  • Equipo remoto: La URL o dirección IP del servidor FTP/SFTP

  • Nombre de usuario: El nombre de usuario para el servidor anterior

  • Contraseña: La contraseña para el servidor anterior

  • Directorio de descarga: La ruta en el servidor que contiene archivos para que Koha descargue y procese

  • Directorio de subida: La ruta en el servidor en la que Koha subirá archivos para que procese el proveedor

  • Calificador: Quién asignó el SAN de abajo?

    • Choose one of the following:

      1. EAN Internacional

      (31B) EE.UU Agencia SAN

      1. Asignado por el proveedor

      2. Asignado por el comprador

  • SAN: El identificador para el proveedor

    Buyer qualifier and SAN are optional. Some vendors require a second buyer identifier in addition to the account EAN.

  • Calificador del comprador: Quién asignó el SAN de abajo?

    • Choose one of the following:

      1. EAN Internacional

      (31B) EE.UU Agencia SAN

      1. Asignado por el proveedor

      2. Asignado por el comprador

  • Comprador SAN: El identificador para la biblioteca

  • Quotes enabled: [y/n] Does this vendor support sending and receiving quotes via EDIfact and do you want to send and receive quotes via EDIfact?

  • Orders enabled: [y/n] Does this vendor support sending and receiving orders via EDIfact and do you want to send and receive orders via EDIfact?

  • Invoices enabled:[y/n] Does this vendor support sending and receiving invoices via EDIfact and do you want to send and receive invoices via EDIfact?

  • Sufijo de archivo de orden de compra: El sufijo de archivo para archivos de compra

  • Sufijo de archivo de cita: El sufijo de archivos de citas

  • Invoice file suffix: The file suffix for invoice files

  • Account number(s): (list them all)

  • Account description(s): (the summary of what this number is for)

EANs: Each library using EDIfact needs to specify a buyer identifier know as a SAN or EAN. This will fill in the :ref:`Library EANs <library-eans-label>` setting.

  • Library

  • EAN

    • Choose one of the following:

      1. EAN Internacional

      (31B) EE.UU Agencia SAN

      1. Asignado por el proveedor

      2. Asignado por el comprador

MARC order fields or grid ordering: These values will fill in the :ref:`MarcFieldsToOrder` preference.

  • price: MARC21 field that contains the item price

  • quantity: MARC21 field that contains the number of items for the given record

  • budget_code: MARC21 field that contains the Koha budget code to be debited

  • discount: MARC21 field the contains the discount as a percentage the the price will be discounted by

  • sort1: MARC21 field that will populate custom field sort1

  • sort2: Campo MARC21 que rellenará el campo personalizado sort2

EDI setup

Before you begin ordering using EDI you will want to take the following steps:

EDI ordering

The first step in ordering using EDI happens on the book vendor’s website. Each seller will use different language, but you will need to place your order on their site and then download the MARC order file. Some language that you might see included «basket», «order», «cart», and/or «MARC order.» Once you have this MARC file downloaded to your computer you will want to log in to Koha and continue the process there.

Visit the Stage MARC records for import tool and upload your file. Once presented with the confirmation screen proceed to Acquisitions.

In Acquisitions create a basket for the vendor you ordered from. From the basket, choose to order from a staged file and click “Order” next to the file you downloaded from your vendor and staged in Koha.

From the confirmation screen you will see all of the data in the MARC file related to your order. If you are not seeing fields such as fund and quantity filled in then be sure to confirm that your MarcFieldsToOrder preference is set right.

Una vez que haya prestado todos los ítems al usuario usted puede imprimir un recibo eligiendo uno método de los dos disponibles.

EDIFACT order

This will generate a pending file in the EDIFACT messages in Koha. The pending files will be processed by the EDI cron job and sent to your vendor.

EDI invoicing

When the book vendor is done processing your files they will send an invoice via EDI as well. The EDI cron job will grab invoices and mark items found in the invoice as received and update your funds without any need for manual intervention.

EDIFACT messages

A log of all messages sent and received via EDIFACT can be found under EDIFACT messages.

image1291