الادارة
Basic parameters
Get there: More > Administration
Important
ضبط جميع 'المعاملات' بالترتيب حسب ظهورها.
المكتبات
أثناء تنصيب نظام كوها الخاص بك يجب عليك إضافة معلومات حول كل مكتبة ستشارك نظامك. سوف يتم استخدام هذه البيانات في العديد من أجزاء كوها.
Get there: More > Administration > Basic Parameters > Libraries
When visiting this page you are presented with a list of the libraries that have already been added to the system.
Adding a library
لإضافة مكتبة جديدة:
Click 'New library'
أعلى النموذج يسأل عن اساسيات المكتبة
لا يجب أن يحتوي رمز المكتبة على أي مسافات وأن يتكون من 10 أحرف أو أقل. سيتم استخدام هذا الرمز كمعرف فريد في قاعدة البيانات
سيتم عرض الاسم في الأوباك حيث يتم عرض اسم المكتبة للعامة ويجب أن يكون اسما له معنى لمستفيديك
بعدها يمكنك إدخال المعلومات الأساسيات لجهات الاتصال حول الفرع
.. screenshot is missing the OPAC info box
يمكن استخدام حقول العنوان وجهة الاتصال لعمل إخطارات مخصصة لكل مكتبة
حقل عنوان البريد الالكتروني غير مطلوب, لكن يجب كتابته لكل مكتبة في نظامك الخاص
Important
تأكد من إدخال عنوان البريد الالكتروني لتتأكد من وصول الملاحظة من و إلىالعنوان الصحيح
If you'd like you can enter a different 'Reply-To' email address. This is the email address that all replies will go to.
Note
If you do not fill in this value Koha will use the address in the ReplytoDefault preference
If you'd like you can also enter a different 'Return-Path' email address. This is the email address that all bounced messages will go to.
Note
If you do not fill in this value Koha will use the address in the ReturnpathDefault preference
إذا تم ملء حقل ال URL فسيتم ربط اسم المكتية في جدول المقتنيات في الأوباك
مربع معلومات الأوباك موجود من أجلك لوضع المعلومات حول المكتبة التي ستظهر في الأوباك عند تحريك الماوس على اسم الفرع في جدول المقتنيات
لا داعي من ملئ حقل IP إلا إذا كنت تخطط لتحد من الوصول لعملاء موظفيك في عنوان IP المخصص لذلك
Important
An IP address is required if you have enabled AutoLocation
If this library has a specific MARC organization code [http://www.loc.gov/marc/organizations/orgshome.html], you can enter it here. If left blank, the code entered in the MARCOrgCode preference will be used for this library.
وأخيرا، إذا كان لديك أي ملاحظات يمكنك وضعها هنا. ولن تظهر في الأوباك
Note
من الحقول المذكورة, يطلب فقط "رمز المكتبة" و"الإسم"
Editing/deleting a library
لن تتمكن من حذف أي مكتبة لديها مستفيدين أو مواد مرتبطة بها.
كل مكتبة لديها رابط "تعديل" تصل إلى اليسار منه. فوق هذا الارتباط لتحرير / تغيير التفاصيل المرتبطة المكتبة في السؤال
Important
لن تتمكن من تحرير 'رمز المكتبة'
Library groups
Library groups are used in searches to limit the search to a group of libraries (for example in a neigbourhood).
Get there: More > Administration > Basic Parameters > Library groups
When visiting this page you are presented with a list of the groups that have already been added to the system.
إضافة مجموعة
Click the 'Add Group' button at the top of the screen
Give the group a title and a description. Only the title is mandatory as it will show up in the staff client and in the OPAC. The description is only used in this page to give an idea of what the group is used for.
You can limit staff from seeing other groups' patrons by checking the box next to the 'Limit patron data access by group' option.
Note
This can be overriden with the user permission view_borrower_infos_ from_any_libraries.
If you would like the group to show up in the library pulldown menu at the top of the OPAC (with OpacAddMastheadLibraryPulldown set to 'Add') and on the advanced search page you can check the 'Use for OPAC search groups' box.
If you want the group to appear in the library pulldown in the staff client advanced search, check the 'Use for staff search groups' box.
Adding a library to a group
Click on the 'Add library' button next to the group to add a library to this group. You will be presented with a list of the libraries that are not already in the group.
Adding a sub-group
If your system is very large, you can create sub-groups. Click on the 'Actions' button next to the group and select the 'Add a sub-group' option. Fill in the title and the description (optional) of the sub-group. The features will be inherited from the parent group.
Deleting a group
To delete a group, click on the 'Actions' button next to the group and select the 'Delete' option.
Item types
كوها يتيح لك أن تنظم مجموعتك حسب انواع المواد وأكواد المجموعات.
Get there: More > Administration > Basic parameters > Item types
أنواع المادة عادةً ما تشير إلى نوع المادة (كتاب ، cd ، dvd الخ) ولكن من الممكن أن تستخدم بأي طريقة أخرى تتناسب مع مكتبتك.
Adding item types
To add a new item type, simply click the 'New item type' button at the top of the Item types page.
In the 'Item type' field, enter a short code for your item type (maximum of 10 characters)
The description is the plain text definition of the item type (for those with multiple languages installed you can translate the item type description in to all of those languages using the 'Translate in to other languages' link)
Item types and can grouped together for searching at the same time. For example you can put DVDs and Bluray in to a group called Movie and then they can be searched together. These groups are defined in the ITEMTYPECAT authorized value.
بإمكانك اختيار صورة ترتبط بنوع المادة الخاصة بك
يمكنك الاختيار من سلاسل مجموعات الصور
يمكنك الربط بصورة بعيدة
او بإمكانك ببساطة أن لا تمتلك أي صورة مرتبطة مع نوع المادة
Important
To have your item type images appear in the OPAC you need to set noItemTypeImages to 'Show'
Get there:More > Administration > Global system preferences > Administration
For items that you are suppressing from the OPAC you can hide their item type from being searched in the OPAC
للمواد التي لا تعمم , اختار خيار 'ليس للإعارة'
المواد المحددة بأنها 'لا تعار' ستظهر في الفهرس ، ولكن لا يمكن أن تعار للمستفيدين
For items that you charge a rental fee for, enter the total fee you charge in the 'Rental charge' field. This will charge the patron on checkout.
Important
لا تقم بادخال الرموز في هذا الحقل, فقط الاعدادو النقاط العشرية (ex. $5.00 يجب ادخال 5 او 5.00)
You can add a default replacement cost for this type of item. If left blank, the replacement price of the item itself will be charged to the user when the item is lost.
- Important
لا تقم بادخال الرموز في هذا الحقل, فقط الاعدادو النقاط العشرية (ex. $5.00 يجب ادخال 5 او 5.00)
You can also add a processing fee that will be added to the replacement cost.
Important
لا تقم بادخال الرموز في هذا الحقل, فقط الاعدادو النقاط العشرية (ex. $5.00 يجب ادخال 5 او 5.00)
If you would like a message or alert to appear when items of this type are checked in you can enter that in the 'Checkin message' box
The Checkin message type can be a Message or an Alert. The only difference between these two is the styling. By default a Message is blue
and an Alert is yellow.
Some SIP devices need you to use a SIP-specific media type instead of Koha's item type (usually lockers and sorters need this media type), if you use a device like this you'll want to enter the SIP media type.
When finished, click 'Save changes'
Note
All fields, with the exception of the 'Item type' will be editable from the Item types list
سوف يظهر نوع مادتك الجديد الآن في القائمة
Editing item types
كل نوع مادة لها زرتحرير بجانبها . لتحرير المادة ببساطة انقر الرابط "تحرير"
Important
You will not be able to edit the code you assigned as the 'Item type' but you will be able to edit the description for the item.
Deleting item types
Each item has a Delete button beside it. To delete an item type, simply click the 'Delete' link.
Important
لن تتمكن من حذف أنواع المادة التي يتم استخدامها من قبل مواد ضمن النظام الخاص بك.
Authorized values
تستخدم القيم الاستنادية في عدة اماكن في كوها. احد الاسباب لاستخدامها هو لاضافة فئة القيمة الاستنادية التي ستتحكم بالقيم التي من الممكن ادخالها في حقول مارك من قبل المفهرسين
Get there: More > Administration > Basic parameters > Authorized values
Existing values
يقوم كوها بتثبيت القيم المحددة مسبقا التي ممكن ان تستخدمها مكتبتك, مثل 'الضائعة'
Asort1
تستخدم لاغراض احصاء التزويد
Asort2
تستخدم لاغراض احصاء التزويد
BOR_NOTES
القيم لرسائل الميتفيد المخصصة التي تظهر على شاشة الإعارة و الأوباك. القيمة في حقل الوصف يجب أن يكون نص الرسالة ويقتصر على 200 محرف.
Bsort1
Values that can be entered to fill in the patron's sort 1 field
Bsort2
Values that can be entered to fill in the patron's sort 2 field
CCODE
مجموعة الرموز (تظهر عندفهرسة بالمواد)
CONTROL_NUM_SEQUENCE
Used to generate control numbers in the advanced cataloguing editor. Enter a string ending with a number as the authorized value and use the description to describe the type of number. For example: 'sprLib0001' 'Springfield library'. In the advanced editor this will activate a new widget that will allow you to choose the type of number and generate the next number in the sequence.
COUNTRY
Used in UNIMARC 102 $a
ضرر
وصف المواد المتضررة ( تظهر عند فهرسة المواد)
DEPARTMENT
Departments are required by and will be used in the Course Reserves module
ETAT
Used in French UNIMARC installations in field 995 $o to identify item status. Similar to NOT_LOAN
HINGS_AS
General holdings: acquisition status designator :: This data element specifies acquisition status for the unit at the time of the holdings report.
HINGS_C
General holdings: completeness designator
HINGS_PF
Physical form designators
HINGS_RD
General holdings: retention designator :: This data element specifies the retention policy for the unit at the time of the holdings report.
HINGS_UT
General holdings: type of unit designator
HSBND_FREQ
Frequencies used by the housebound module. They are displayed on the housebound tab in the patron account in staff.
ITEMTYPECAT
Allows multiple Item types to be searched in a category. Categories can be entered into the Authorized value ITEMTYPECAT. To combine Item types to this category, enter this Search category to any Item types.
For example, an ITEMTYPECAT could be NEW, then in the Item type for NEW BOOKS NEW DVDS, etc the search category could be added NEW. This is helpful when a patron chooses the Search category of NEW, they could get Koha to search multiple Item types with a single search.
LANG
ISO 639-2 standard language codes
LOC
Shelving location (usually appears when adding or editing an item). LOC maps to items.location in the Koha database.
العربة
Is the shelving cart location, used by InProcessingToShelvingCart and ReturnToShelvingCart
PROC
The location to be used for NewItemsDefaultLocation (change description as desired), also the location expected by InProcessingToShelvingCart.
LOST
وصف للعناصر المفقودة (تظهر عند إضافة أو حذف أي عنصر)
Important
Values given to lost statuses should be numeric and not alphabetical in order for statuses to appear properly
MANUAL_INV
القيم لأنواع فواتير الدليل
Important
The value set as the Authorized value for the MANUAL_INV authorized value category will appear as the Description and the Authorized value description will be used as the amount. Enter monetary amounts in the description without currency symbols.
OPAC_SUG
A list of reasons displayed in the suggestion form on the OPAC.
NOT_LOAN
أسباب عدم استخدام العناوين للإعارة
Important
Values given to lost statuses should be numeric and not alphabetical in order for statuses to appear properly
Note
Negative number values will still allow holds (use for on order statuses for example) where as positive numbers will not allow holds or checkouts. A value of 0 means 'for loan'.
ORDER_CANCELLATION_REASON
Reasons why an order might have been cancelled
PAYMENT_TYPE
Populates a dropdown list of custom payment types when paying fines
qualif
Function codes (author, editor, collaborator, etc.) used in UNIMARC 7XX $4 (French)
RELTERMS
French terms of relations
REPORT_GROUP
'REPORT_GROUP' توفر طريقة لفرز وتصفية التقارير الخاصة بك، القيم الافتراضية في هذه الفئة تشمل وحدات كوها (الحسابات، التزويد، الفهرس، الإعارة، المستفيدين)
REPORT_SUBGROUP
Can be used to further sort and filter your reports. This category is empty by default. Values here need to include the authorized value code from REPORT_GROUP in the Description (OPAC) field to link the subgroup to the appropriate group.
RESTRICTED
تقييد حالة المادة
ROADTYPE
'ROADTYPE' يستخدم لأنواع الطريق التي سيتم استخدامها في عناوين المستفيد
SIP_MEDIA_TYPE
اقتراح
اسباب رفض او قبول اقتراحات المستفيين (تظهر عند ادارة الاقتراحات)
SUGGEST_FORMAT
List of Item types to display in a drop down menu on the Purchase suggestion form on the OPAC. When creating the authorized values for SUGGEST_FORMAT, enter a description into this form so it is visible on the OPAC to patrons.
SUGGEST_STATUS
A list of additional custom status values for suggestions that can be used in addition to the default values.
STACK
Shelving control number
TERM
Terms to be used in Course Reserves module. Enter Terms that will show in the drop down menu when setting up a Course reserve. (For example: Spring, Summer, Winter, Fall).
WITHDRAWN
وصف المادة (يظهر عند اضافة او تحرير المادة)
YES_NO
حقل القيمة الاستنادية العامة يستخدم في اي مكان تحتاج إلى سحب أسفل قائمة نعم/لا
Add new authorized value category
بالإضافة للفئات الموجودة التي تأتي بشكل افتراضي مع كوها، المكتبيين بإمكانهم إضافة فئات القيم الاستنادية خاصتهم للتحكم بالبيانات التي أُدخِلت إلى النظام. لإضافة فئة جديدة:
Click 'New category'
حد عدد رمز الفئة 10 حروف ( يكون قصير لجعل الفئة واضحة )
Important
يجب الا يكون في الفئة فراغات او محارف خاصة وألا يكون بينهم فواصل
عند إضافة فئة جديدة يطلب منك إنشاء قيمة استنادية واحدة على الأقل
Enter a code for your Authorized value into the 'Authorized value' field
Important
Authorized value is limited to 80 characters and cannot have spaces or special characters other than underscores and hyphens in it.
استخدم حقل الوصف للقيمة الفعلية التي سيتم عرضها. إذا كنت ترغب في عرض شيء آخر في الأوباك، قم بإدخال "وصف (أوباك)"
إذا كنت ترغب في قصر فئة قيمة الاستناد تلك على مكتبات محددة فقط يمكنك اختيارها من قائمة "محدد الفرع". لعرضها لكل المكتبات قم باختيار "كل الفروع" أعلى القائمة.
If you have StaffAuthorisedValueImages and/or AuthorisedValueImages set to show images for authorized values you can choose the image under 'Choose an icon'
اضغط 'حفظ'
Your new category and value will appear on the list of Authorized values
Add new authorized value
قيم استادية جديدة من الممكن أن تضاف إلى أي فئة جديدة أو حالية . لإضافة قيمة :
اضغط 'قيمة استناد جديدة ل ...'
Enter a code for your authorized value into the 'Authorized value' field
Important
Authorized value is limited to 80 characters and cannot have spaces or special characters other than underscores and hyphens in it.
استخدم حقل الوصف للقيمة الفعلية التي سيتم عرضها. إذا كنت ترغب في عرض شيء آخر في الأوباك، قم بإدخال "وصف (أوباك)"
إذا كنت ترغب في قصر فئة قيمة الاستناد تلك على مكتبات محددة فقط يمكنك اختيارها من قائمة "محدد الفرع". لعرضها لكل المكتبات قم باختيار "كل الفروع" أعلى القائمة.
If you have StaffAuthorisedValueImages and/or AuthorisedValueImages set to show images for authorized values you can choose the image under 'Choose an icon'
اضغط 'حفظ'
ستظهر القيمة الجديدة في القائمة إلى جانب القيم الحالية
Patrons and circulation
الإعدادات للتحكم بعملية الإعارة ومعلومات المستفيد.
Patron categories
فئات المستفيدين تسمح لك ﻷن تنظم معلومات مستفيديك ، القواعد المختلفة ، مجموعات الأعمار ، وأنواع المستفيدين.
Get there: More > Administration > Patrons and circulation > Patron categories
المستفيدون تم تعيينهم لواحدة من ست فئات رئيسية:
بالغ
معظم الأنواع الشائعة للمستفيدين ، عادةً ما تستخدم فئة عامة للـ'مستفيد' .
طفل
الطفل المستفيد بإمكانه أن يكون وصي ليبقى على صلة معهم
موظف
Librarians (and library workers) should be assigned the staff category so that you can set their permissions and give them access to the staff client.
التنظيمية
المستفيدون التنظيميون هم منظمة. المنظمة من الممكن أن تستخدم ككفيل للمستفيدين المهنيين.
محترف
المستفيدون المحترفون يمكن ربطهم بالمستفيدون التنظيميون
إحصائي
نوع المستفيد يستخدم فقط للأغراض الإحصائية، مثل استخدام المادة من المنزل.
إضافة فئه مستخدمين
To add a new patron category click 'New category' at the top of the page
The 'Category code' is an identifier for your new code.
Important
رمز الفئة يتم تحديده إلى 10 محارف (من أرقام وحروف)
Important
هذا الحقل مطلوب من أجل المحافظة على فئة المستفيد الخاص بك. وإذا بقي فارغا سوف يظهر لك وجود خطأ.
أدخل نسخة نص عادي من فئة في حقل "الوصف".
Important
هذا الحقل مطلوب من أجل المحافظة على فئة المستفيد الخاص بك. وإذا بقي فارغا سوف يظهر لك وجود خطأ.
ينبغي أن تملأ فترة التسجيل (في الشهور) إذا كان لديك فترة تسجيل محدودة للمستفيدين الخاصيين بك (بطاقات الطلاب مثلا تنتهي بعد 9 أشهر أو حتى تاريخ محدد)
Important
لا يمكنك إدخال كلاً من الشهر والتاريخ . للدخول إختر أي واحد أو آخر.
Important
هذا الحقل مطلوب من أجل المحافظة على فئة المستفيد الخاص بك. وإذا بقي فارغا سوف يظهر لك وجود خطأ.
من الممكن أن ترتبط بعض فئات المستفيدين بمتطلبات لحد أدنى من العمر (تُحدد بالسنين) ، أدخل هذا العمر في 'العُمر المطلوب'
Important
This value will only be checked if BorrowerMandatoryField defines the dateofbirth as a required field on the patron record
يمكن أيضاً أن تضع عمر أقصى لفئة المستفيدين (بالسنوات) ترتبط بهم ( مثل فئة الأطفال)، أدخل العُمر في 'الحد الأقصى للعمر'
Important
This value will only be checked if BorrowerMandatoryField defines the dateofbirth as a required field on the patron record
إذا قمت بتكليف للمستفيدين الخاصيين برسوم العضوية (مثل أولئك الذين يعيشون في منطقة أخرى) يمكنك إدخالها في حقل 'رسوم التسجيل'.
Important
فقط أدخل الأرقام والفواصل العشرية في هذا الحقل
Note
Depending on your value for the FeeOnChangePatronCategory preference this fee will be charged on patron renewal as well as when they are first enrolled.
اذا أردت أن يصل لمستفيدك اشعارات التأخر، عيّن 'مطلوب اشعارات التأخير' إلى 'نعم'
يمكنك إتخاذ قرار بشأن فئة المستفيد الأساسية إذا ظهرت مواد مفقودة في عميل الموظفين عن طريق الإختيار من القائمة المنسدلة 'المواد المفقودة في عميل الموظفين'
Important
لاحظ أن هذا لا ينطبق إلا في عميل الموظفين، لذا تغيير هذه القيمة على فئات المستفيدين الذين ليس لديهم إمكانية الوصول إلى عميل الموظفين لا يحدث أي فارق
إذا قمت بتكليف المستفيدين من أجل حجز المواد، أدخل مقدار الرسم في حقل 'رسم الحجز'
Important
فقط أدخل الأرقام والفواصل العشرية في هذا الحقل
في حقل 'نوع الفئة' اختر واحدة من فئات المستفيد الأساسية الستة
Important
هذا الحقل مطلوب من أجل المحافظة على فئة المستفيد الخاص بك. وإذا بقي فارغا سوف يظهر لك وجود خطأ.
The Branch limitations let you limit this patron category to only some branches in your library system. Select 'All branches' if you would like any library to be able to use this category.
You can decide if this patron category is blocked from performing actions in the OPAC if their card is expired using the next option. By default it will follow the rule set in the BlockExpiredPatronOpacActions preference
Next you can choose the default privacy settings for this patron category. This setting can be edited by the patron via the OPAC if you allow it with the OPACPrivacy system preference.
You can set the preference for checking the patron's circulation history when checking out an item. The default value for this is set in the CheckPrevCheckout system preference. This setting can be overridden on a per-patron basis in their individual file.
وأخيرا يمكنك تعيين تفضيلات الرسائل المتقدمة بشكل افتراضي إلى فئة المستفيد
Important
Requires that you have EnhancedMessagingPreferences enabled
هام: هذه من الممكن أن تُغير من أجل المستفيدين الأفراد، هذه الاعداد هو فقط افتراضي لجعله أسهل لإعداد الرسائل من أجل فئة كاملة
Note
After setting the default for the patron category you can force those changes to all existing patrons by running the borrowers-force-messaging-defaults script found in the misc/maintenance folder. Ask your system administrator for assistance with this script.
Circulation and fines rules
هذه القواعد تحدد الطريقة التي يتم توزيع المواد لخاصة بك، وكيف / ومتى يتم احتساب الغرامات وكيف يتم التعامل مع الحجوزات المعلقة.
Get there: More > Administration > Patrons and circulation > Circulation and fines rules
يتم تطبيق قواعد محددة من الأكثر تحديدا إلى الأقل تحديدا، وذلك باستخدام الموجود الأول في هذا الطلب:
ذات المكتبة, ذات نوع المستفيد, ذات نوع المادة
نفس المكتبة, نفس نوع المستفيد, كل نوع المادة
ذات المكتبة, كل أنواع المستفيدين, ذات نوع المادة
نفس المكتبة, كل أنواع المستفيدين, كل أنواع المواد
الافتراضي (كل المكتبات)، نفس نوع المستفيد، نفس نوع المادة
الافتراضي (كل المكتبات)، نفس نوع المستفيد، كل أنواع المادة
الافتراضي (كل المكتبات)، كل أنواع المستفيد، نفس نوع المادة
الافتراضي (كل المكتبات)، كل أنواع المستفيد، كل أنواع المادة
The CircControl and HomeOrHoldingBranch also come in to play when figuring out which circulation rule to follow.
If CircControl is set to "the library you are logged in at" circulation rules will be selected based on the library you are logged in at
If CircControl is set to "the library the patron is from" circulation rules will be selected based on the patron's library
If CircControl is set to "the library the item is from" circulation rules will be selected based on the item's library where HomeOrHoldingBranch chooses if item's home library is used or holding library is used.
If منع is set to 'Prevent' then the value of HomeOrHoldingBranch is used in figuring out if the item can be checked out. If the item's home library does not match the logged in library, the item cannot be checked out unless you are a superlibrarian.
Note
إذا كان نظامك من مكتبة واحدة قم باختيار اسم الفرع قبل إنشاء القواعد (أحياناً يمكن أن يؤدي وجود قواعد فقط لخيار "كل المكتبات" إلى حدوث مشكلات في الحجوزات)
Important
على أقل تقدير ستحتاج لتعيين قاعدة إعارة افتراضية. هذه القاعدة يجب أن تُعين لكل أنواع المواد، لكل المكتبات وكل فئات المستفيدين. هذا سيطبق على كل الحالات التي لا تتطابق مع قاعدة محددة. اذا لم يكن لديك قاعدة عند الإعارة لكل المكتبات، كل أنواع المواد وكل انواع المستفيدين عندئذ من الممكن أن ترى مستفيدين قد حُظروا من الحجز. ستحتاج لقاعدة أيضاً لمكتبك التي تتبع لها لكل أنواع المواد ولكل أنواع المستفيدين لتجنب قضية الحجز هذه. كوها يحتاج أن يعرف القاعدة التي سيرجع إليها.
Default circulation rules
باستخدام المصفوفة لاصدار القواعد يمكنك تعريف القواعد التي تعتمد على مجموعات نوع المادة / والمستفيد. لضبط القواعد الخاصة بك، إختر المكتبة بالسحب للأسفل ( أو 'جميع المكتبات' إذا كنت تريد تطبيق هذه القواعد لجميع الأفرع):
من المصفوفة تستطيع أن تختار أي مزيج من فئات المستفيدين وأنواع المواد لتطبق القواعد عليها
أولا اختيار فئة المستفيد التي ترغب في تطبيقها على القاعدة. إذا تركت هذا إلى "الكل" ستطبق على جميع فئات المستفيدين
اختيار 'نوع المادة' التي ترغب هذه القاعدة أن تنطبق عليها. إذا تركت هذا 'الكل' وسوف تطبق على جميع أنواع العناصر
حدد عدد المواد التي يمكن لمستفيد استعارتها مرة واحدة عن طريق إدخال رقم في حقل " الإعارات المسموح بها حاليا"
If you're allowing OnSiteCheckouts then you may also want to set a limit on the number of items patron's can have onsite.
Note
This setting also depends on the ConsiderOnSiteCheckoutsAsNormalCheckouts preference
يتم تحديد المدة الزمنية التي يمكن أن تعار فيها المادة لمستفيد ما ، من خلال إدخال رقم الوحدات (أيام أو ساعات) في صندوق 'مدة الإعارة'.
اختر أي من وحدات الوقت ( الأيام أو الساعات )، التي سيتم بالاستناد عليها حساب مدة الإعارة والغرامات.
كما يمكنك تعريف تاريخ استحقاق ثابت لفئة مستفيد محدد ونوع مادة. يقوم تاريخ الاستحقاق الثابت بتجاهل قواعد الإعارة ويجعل كل المواد من نفس النوع المعرف تستحق في، أو قبل، أو بعد التاريخ لذي تحدده.
'مبلغ الغرامات' يجب أن يحتوي على المبلغ الذي تريد أن تغرمه للمواد المتأخرة .
Important
أدخل فقط الأرقام والنقاط العشرية (بدون رموز العملات).
أدخل الـ 'المدة الزمنية لفرض الغرامة' بالوحدة التي ضبطتها ( مثال: افرض الغرامات كل يوم ، او كل ساعتين)
'When to charge' is most handy in libraries that have a fine charging interval of more than 1 day.
نهاية الفترة
Given a grace period of 2 days and a fine interval of 7 days, the first fine will appear 7 days after the due date, it will always take one fine interval (7 days), before the first fine is charged
بدء الفترة
Given a grace period of 2 days and a fine interval of 7 days, the first fine will appear 2 days after the due date and the second fine 7 days after the due date.
The 'Fine grace period' is the period of time an item can be overdue before you start charging fines.
Important
يمكن أن يتم ضبط هذا فقط لوحدة اليوم، وليس في الساعات
'قيمة الغرامات المُتأخرة' هو الحد الأقصى من مجموع غرامات المستفيد والمواد المرافقة
Important
If this field is left blank then Koha will not put a limit on the fines this item will accrue. A maximum fine amount can be set using the MaxFine system preference.
If you would like to prevent overcharging patrons for a lost items, you can check the box under 'Cap fine at replacement price.' This will prevent the patron's fines from going above the replacement price on the item.
Note
If the 'Overdue fines cap' is also set, the fine will be the lesser of the two, if both apply to the given overdue checkout.
إذا ما كان فرض الغرامات في مكتبتك على المستفيدين يكون من خلال تعليق حساباتهم ، فبإمكانك أن تدخل عدد الايام التي تؤدي لذلك في حقل 'التعليق بالأيام'
Important
يمكن أن يتم ضبط هذا فقط لوحدة اليوم، وليس في الساعات
كما يمكنك تعرف الحد الأقصى لعدد أيام تعليق المستخدم في الإعداد "الحد الأقصى لفترة التعليق"
ثم قرر إذا كان المستفيد قادر على تجديد نوع المادة هذا ، وإذا كان الأمر كذلك، أدخل عدد المرات التي يستطيع التجديد في صندوق 'التجديدات المسموحة'
إذا كنت تسمح بالتجديدات يمكنك التحكم في مدة التجديد (بالوحدة التي قمت باختيارها) في مربع "فترة التجديد"
If you're allowing renewals you can control how soon before the due date patrons can renew their materials with the 'No renewals before' box.
Items can be renewed at any time if this value is left blank. Otherwise items can only be renewed if the item is due after the number in units (days/hours) entered in this box.
To control this value on a more granular level please set the NoRenewalBeforePrecision preference.
You can enable automatic renewals for certain items/patrons if you'd like. This will renew automatically following your circulation rules unless there is a hold on the item
Important
You will need to enable the automatic renewal cron job for this to work.
Important
This feature needs to have the "no renewal before" column filled in or it will auto renew everyday after the due date
إذا ما كان من الممكن للمستفيد ان ينفذ الحجوزات على هذا النوع من المواد ، أدخل الرقم الأعظمي للمواد (من هذا النوع) التي من الممكن أن تحجز في حقل 'الحجوز المسموحة'
بعد ذلك يمكنك أن تقرر إذا كان مسموحا لمزيج المستفيد / المادة وضع حجوزات على المواد الموجودة على الرف (أو المتاحة في المكتبة) أم لا. إذا اخترت "لا" فسيمكن وضع المواد في الحجز إذا كانت معارة فقط
You can also decide if patrons are allowed to place item specific holds on the item type in question. The options are:
السماح: السماح للمستفيدين بخيار اختيار المادة التالية المتاحة أو مادة محددة.
عدم السماح: سيتيح فقط للمستفيدين اختيار المتاح بعد ذلك
قسر: ستتيح للمستفيدين فقط اختيار مادة محددة
Finally, if you charge a rental fee for the item type and want to give a specific patron type a discount on that fee, enter the percentage discount (without the % symbol) in the 'Rental Discount' field
عند الانتهاء، انقر "إضافة" لحفظ التغييرات. لتعديل القاعدة، أنشئ واحدة جديدة بنفس نوع المستفيد. إذا رغبت في حذف القاعدة، قم ببساطة بالنقر على رابط "حذف" إلى يمين القاعدة
عندما تكون سياستك مضبوطة ، فبإمكانك إلغاء ضبطها من خلال وصلة 'إلغاء الضبط' على يسار القاعدة
لتوفير الوقت يمكنك استنساخ القواعد من مكتبة واحدة إلى أخرى عن طريق اختيار الخيار أعلاه استنساخ مصفوفة القواعد.
بعد الاختيار للنسخ ستُقدّم مع رسالة تأكيد.
Default checkout, hold and return policy
يمكنك ضبط حد أقصى لعدد الإعارات وسياسة الحجز ليتم استخدامها في حالة عدم تعريف أي عدد لنوع أو فئة مادة معينة.
من هذه القائمة يمكنك أن تضبط الإفتراضيات للتطبيق على كل أنواع المواد والمستفيدين في المكتبة.
In 'Total current checkouts allowed' enter the total number of items patrons can have checked out at one time
In 'Total current on-site checkouts allowed' enter the total number of items patrons can have checked out on site at a time (OnSiteCheckouts needs to be set to 'Enable')
التحكم حيث يمكن للمستفيدين من وضع الحجوزات باستخدام القائمة 'سياسة الحجز'
من أي مكتبة: المستفيدون من أي مكتبة قد يحجزون هذه المادة. (الإفتراضي إذا لم يعرَّف شيء آخر)
من المكتبة الرئيسية: فقط المستفيدون من مواد المكتبة الرئيسية قد يحجزون هذا الكتاب.
لا حجوز مسموحة: غير مسموح لأي مستفيد أن يحجز هذا الكتاب.
Control if there is a limit to filling a hold based on the item's library
any library
item's home library
item's holding library
Note
The patron's home library should not affect whether a patron can place the hold, instead the hold will only be fillable when an item matching the pickup location becomes available.
التحكم حيث أن المادة تعود بمجرد إرجاعها
إعادة المادة لمكتبتها الرئيسية
تعود المواد إلى المصدر الفرعي
طواف المادة
عندما تطوف مادة فهي تبقى في المكتبة التي أعيدت فيها ، ولا تعود أبداً لـِ 'الرئيسية'
عندما تكون سياستك مضبوطة ، فبإمكانك إلغاء ضبطها من خلال وصلة 'إلغاء الضبط' على يسار القاعدة
Default checkout limit by patron cateogry
لهذه المكتبة، يمكنك تعيين الحد الأقصى لعدد الإعارات التي يمكن أن تقدم لفئة معينة بغض النظر عن نوع المادة.
Note
إذا إذا تم ترك الكمية الإجمالية القابلة للإعارة للفئة معينة من المستفيد فارغة، لا يوجد حد ينطبق، يمكن الاستثناء لحد التعريف الخاص بك لنوع مادة معينة.
For example, if you have a rule in the matrix that says Board patrons are allowed 10 books and 5 DVDs but you want to make it so that Board patrons only have a total of 12 things checked out at once. If you enter 12 here and the patron has 10 books out already they will only be allowed 2 DVDs to equal the 12 total they're allowed.
Default lost item fee refund on return policy
Here, you can specify the default policy for lost item fees on return. This policy will apply to this library. This rule is to be used with the RefundLostOnReturnControl system preference.
Default holds policy by item type
لهذه المكتبة، يمكنك تعديل قواعد أنواع مادة"itemtypes " معينة بغض النظر عن فئة المستفيد.
The various hold policies have the following effects:
From any library: Patrons from any library may put this item on hold. (default if none is defined)
From home library: Only patrons from the item's home library may put this book on hold.
No holds allowed: No patron may put this book on hold.
Important
Note that if the system preference يسمح بتجاوز سياسة الحجز set to 'allow', these policies can be overridden by your circulation staff.
Important
هذه السياسات تعتمد على الفرع الرئيسي للمستفيد، و ليس الفرع الذي ينتمي إليه موظف الحجز.
Control if there is a limit to filling a hold based on the item's library
any library
item's home library
item's holding library
Note
The patron's home library should not affect whether a patron can place the hold, instead the hold will only be fillable when an item matching the pickup location becomes available.
The various return policies have the following effects:
إرجاع المادة لموطنها: المادة سوف تحث أمين المكتبة لنقل المادة إلى مكتبتها الرئيسية
Important
If the AutomaticItemReturn preference is set to automatically transfer the items home, then a prompt will not appear
إعادة المادة إلى الفرع المصدر: المادة سوف تحث أمين المكتبة لإرجاع المادة إلى المكتبة التي تمت الإعارة منها
Important
If the AutomaticItemReturn preference is set to automatically transfer the items home, then a prompt will not appear
تحركات المادة: لن يتم نقل المادة من الفرع الذي تم إرجاعها إليه، بدلا من ذلك سوف تبقى في الفرع إلى أن يتم نقله يدويا أو إرجاعه إلى فرع آخر
For example you might allow holds at your libraries but not what New items or DVDs to be placed on hold by other branches so you can set the 'Hold policy' to 'From home library' so that those items can only be placed on hold if the items' owning library and the patron's home library are the same. You can also block holds completely on specific item types from this form. This is also how you can set up floating item types and types that remain with their home library.
Patron attribute types
Patron attributes can be used to define custom fields to associate with your patron records. In order to enable the use of custom fields you need to set the ExtendedPatronAttributes system preference.
Get there: More > Administration > Patrons and circulation > Patron attribute types
الإستخدام الشائع لهذا الحقل سيكون لأرقام هويات الطلاب أو أرقام شهادات القيادة الخاصة بهم
Adding patron attributes
To add a new patron attribute type, click the 'New patron attribute type' button at the top of the page
في 'كود نوع سمة المستفيد'، أدخل الرمز القصير لتحديد هذا الحقل
Important
ويقتصر هذا الحقل إلى 10 محارف (الأرقام والحروف فقط)
Important
لا يمكن تغيير هذا الإعداد بعد أن يم تعريف السمة
في حقل 'الوصف' أدخل أطول تفسير (نص عادي) لما سيحويه هذا الحقل
ضع علامة في المربع الموجود بجوار 'متكرر' للسماح لسجل المستفيد أن يحتوي على قيم متعددة من هذه السمة.
Important
لا يمكن تغيير هذا الإعداد بعد أن يم تعريف السمة
إذا تم تحديد'المعرف الفريد'، سوف تكون السمة معرف فريد وهو ما يعني، إذا تم إعطاء قيمة إلى سجل المستفيد، لا يمكن أن تعطى نفس القيمة إلى سجل مختلف
Unique attributes can be used as match points on the patron import tool
Important
لا يمكن تغيير هذا الإعداد بعد أن يم تعريف السمة
تحقق من 'السماح لكلمة المرور' لتجعل من الممكن ربط كلمة المرور مع هذه الصفة.
اختر 'عرض في أوباك' لتُعرضَ هذه السمة على صفحة تفاصيل المستفيد في أوباك.
قم بتحديد 'قابل للبحث' لجعل سمة البحث في فريق البحث للمستفيدين.
اختر 'العرض في الإعارة' لتجعل هذه السمة تظهر في أسلوب عرض تفاصيل المستخدم المختصرة على يمين شاشة الإعارة وصفحات المستفيد الأُخرى
فئة القيمة المعتمدة، إذا تم تحديد واحد، فإن صفحة مدخلات سجل المستفيد سيسمح فقط لاختيار القيم من قائمة القيمة المعتمدة.
سوف تحتاج أولا إلى إضافة قائمة القيمة الإستنادية لتظهرفي هذه القائمة
Get there:More > Administration > Basic parameters > Authorized values
Important
لا يتم تطبيق قائمة القيمة الإستنادية أثناء عملية استيراد مستفيد دفعة واحدة.
إذا كنت ترغب في أن يتم استخدام هذه السمة بواسطة فروع محددة فقط يمكنك اختيار الفروع من قائمة "محدد الفروع". قم باختيار "كل المكتبات" لعرضها لكل المكتبات.
Important
Note that items with locations already set on them will not be altered. The branch limitation only limits the choosing of an authorized value based on the home branch of the current staff login. All authorized values for item records (LOC, LOST, CCODE, etc) will show in the OPAC for all patrons.
إذا ما رغبتَ في أن تعرض فقط هذه السمة للمستفيدين من نوع واحد اختر نوع المستفيدين من القائمة المنسدلة لـ 'الفئات'.
If you have a lot of attributes it might be handy to group them so that you can easily find them for editing. If you create an Authorized value for PA_CLASS it will show in the 'Class' pull down and you can then change your attributes page to have sections of attributes
اضغط حفظ لحفظ الصفة الجديدة الخاصة بك
عندما تُضاف سماتك ستظهر في قائمة السمات وفي تسجيلة المستفيد نموذج الإضافة/التعديل
اعداد الفئات لتنظيم السمات ستظهر بهذه الطريقة عل الإضافة/تحرير نموذج المستفيد
Editing/deleting patron attributes
كل سمة مستفيد له تعديل وحذف رابط بجانبه في قائمة السمات.
بعض الحقول في السمة أنشئت لمرة واحدة لن تحرر:
كود نوع سمة المستفيد
مكرر
معرِّف فريد
لن تتمكن من حذف سمة ما اذا كانت قيد الاستخدام.
Library transfer limits
تحديد القدرة على نقل المواد بين المكتبات بناء على المكتبة المرسلة، المكتبة المستلمة، ورمز المجموعة
Get there: More > Administration > Patrons and circulation > Library transfer limits
These rules only go into effect if the preference UseBranchTransferLimits is set to 'enforce'.
قبل أن تبدأ عليك الاختيار أي مكتبة تحدد هذه الحدود ل.
Transfer limits are set based on the collections codes you have applied via the Authorized value administration area.
رموز المجموعة سوف تظهر كألسنة فوق صندوق التأشيرات:
قم باختيار المربعات للمكتبات التي تقبل الاختيار من لنوع المادة الذي قمت باختياره في الأعلى (في المثال أدناه - FIC)
في المثال المذكور أعلاه، مكتبة Centerville سوف تسمح للمستفيدين بإرجاع موادهم من جميع المكتبات ما عدا مكتبتي Liberty و Franklin لفروعهم.
مصفوفة تكاليف النقل
The transport cost matrix lets a library system define relative costs to transport books to one another. In order for the system to use this matrix you must first set the مصفوفة تكاليف النقل preference to 'Use'.
Important
The transport cost matrix takes precedence in controlling where holds are filled from, if the matrix is not used then Koha checks the StaticHoldsQueueWeight.
التكاليف تكون قيمة عشرية بين القيم القصوى التعسفية (مثل 1 أو 100 ) وبين ال 0 وهي أقل قيمة (لا) كلفة. على سبيل المثال ، بإمكانك فقط أن تستخدم المسافة بين كل مكتبة بالميل كـ 'تكلفة' ، إذا كان فعلاً سيؤثر على تكلفة نقلهم. ربما مكتب البريد سيكون أفضل مقياس. المكتبات التي تتشارك بمكتب بريد ستحصل على قيمة من 1 مكاتب البريد المتجاورة ستحصل على قيمة 2، إلخ.
ببساطة لتدخل قيمة النقل أنقر على الخلية التي ترغب بتعديلها ، أزل التحديد عن مربع 'تعطيل' وأدخل 'التكلفة'
بعد ادخال التكلفة الخاصة بك، اكتب على لوحة مفاتيحك 'ادخل' أو انقر زر 'حفظ' أسفل المصفوفة لحفظ التغييرات.
Note
A NULL value will make no difference where the From and To libraries are the same library. However, as a best practice, you should put a 0 in there. For all other To/From combinations, a NULL value will cause that relationship to act as if it has been disabled. So, in summary, don't leave any of the values empty. It's best to always put a number in there ( even if you choose to disable that given To/From option ).
Item circulation alerts
يمكن للمكتبات أن تقرر ما اذا كانت تريد اخطار العملاء بمستجدات الاعارة (حصر المدخلات وحصر المخرجات)
Get there: More > Administration > Patrons and circulation > Item circulation alerts
يتم تعيين هذه التفضيلات التي تعتمد على أنواع المستفيد وأنواع المادة.
Important
هذا التفضيل يمكن تجاوزه بواسطة التغييرات في تفضيلات رسائل المستفيد الفردية.
لإعداد تنبيهات لعملية الإعارة:
اختر مكتبتك من القائمة المنسدلة في أعلى الشاشة
لضبط التفضيلات لجميع المكتبات، والحفاظ على القائمة من خلال التعيين على'افتراضي'
بشكل افتراضي يتم إشعار جميع أنواع المواد والمستفيدين بعمليات الإرجاع والإعارة. لتغيير ذلك، انقر فوق مادة/مستفيد نوع تركيبة والتي ترغب بإيقاف إشعاراتها.
في المثال المذكور أعلاه، الأحداث والأطفال لن يستقبلوا إشعارات الإعارة.
Cities and towns
لتوحيد عملية إدخال المستفيدين ، بإمكانك ان تعرِّف المدن والبلدات داخل منطقتك، بذلك عندما يُضاف مستفيد جديد ، فإن أمين المكتبة ببساطة عليه أن يختار البلدة من القائمة بدلاً من أن يكتبها ويكتب معلومات رمزها البريدي (ZIP) .
Get there: More > Administration > Patrons and circulation > Cities and towns
Adding a city
To add a new city, click the 'New city' button at the top of the page and enter the city name, state, zip/postal code and country.
One you click Submit, your city will be saved and will be listed on the Cities and towns page
المدن تستطيع الإضافة والحذف في أي وقت.
Viewing cities on patron add form
If you have defined local cities using the 'New city' form, then when adding or editing a patron record you will see those cities in a pull down menu to make city selection easy.
هذا سوف يسمح لدخول سهل للمدن المحلية في تسجيلة المستفيد دون المخاطرة من احتمال الأخطاء المطبعية أو رموز بريدية خاطئة.
Catalog administration
اضبط عناصر التحكم هذه قبل البدأ بالفهرسة على نظام كوها الخاص بك.
Get there: More > Administration > Catalog
MARC bibliographic frameworks
Think of frameworks as templates for creating new bibliographic records. Koha comes with some predefined frameworks that can be edited or deleted, and librarians can create their own frameworks for content specific to their libraries.
Get there: More > Administration > Catalog > MARC bibliographic frameworks
Important
Do not delete or edit the Default framework since this will cause problems with your cataloging records - always create a new template based on the Default framework, or alter the other frameworks.
بعد النقر على رابط 'تركيب مارك' على يسار كل قالب يمكنك أن تقرر كم عدد الحقول التي تريد أن تشاهدها في الشاشة الواحدة عن طريق استخدام خيارات تقسيم الصفحة في أعلى الجدول.
Add new framework
لإضافة قالب جديد
Click 'New framework'
إدخال رمز من 4 حروف أو أقل
استخدم حقل الوصف لتدخل المزيد من التعريف المفصل عن قالب مارك الخاص بك.
اضغط 'إرسال'
Once your framework is added click 'MARC structure' to the right of it on the list of frameworks
You will be asked to choose a framework to base your new framework off of, this will make it easier than starting from scratch
Once your framework appears on the screen you can edit or delete each field by following the instructions for editing subfields
Edit existing frameworks
Clicking 'Edit' to the right of a framework will only allow you to edit the description for the framework:
To make edits to the fields associated with the framework you must first click 'MARC Structure' and then follow the instructions for editing subfields
Add subfields to frameworks
To add a field to a framework click the 'New tag' button at the top of the framework definition
هذا سوف يفتح نموذج فارغ للإدخال بيانات حقل مارك
إدخال المعلومات عن الوسم الجديد:
'الوسم' هو رقم حقل المارك
'التسمية للمكتبة' هو النص الذي سوف يظهر في عميل الموظف عند وحدة الفهرسة
'التسمية للأوباك' هو النص الذي سيظهر في OPAC عند عرض نسخة مارك للتسجيلة
اذا هذا الحقل ممكن أن يُكرر , تحقق من مربع 'التكرار'
اذا هذا الحقل الزامي, قم بتحديد مربع 'الالزامية'
اذا كنت تريد هذا الحقل أن يكون مُنسدل مع اجابات مُحتملة محدودة،اختر أي قائمة 'القيمة الاستنادية' تريد أن تستخدمها
When you're finished, click 'Save changes' and you will be presented with your new field
To the right of the new field is a link to 'Subfields,' you will need to add subfields before this tag will appear in your MARC editor. The process of entering the settings for the new subfield is the same as those found in the editing subfields in frameworks section of this manual.
Edit framework subfields
Frameworks are made up of MARC fields and subfields. To make edits to most frameworks you must edit the fields and subfields. Clicking 'Edit' to the right of each subfield will allow you to make changes to the text associated with the field
Each field has a tag (which is the MARC tag) that is uneditable
The 'Label for lib' is what will show in the staff client if you have advancedMARCeditor set to display labels
إن'التسمية للأوباك' هي ما سيتم عرضه في طريقة عرض مارك على الأوباك
اذا قمت بتحديد 'قابل للتكرار' عندئذ سيكون لدى الحقل اشارة زائد بجانبها تسمح لك بإضافة العديد من هذه الوسيمة
اذا قمت بتحديد 'الزامي' لن يتم السماح بحفظ التسجيلة مالم يكن لديك قيمة معينة لهذه الوسيمة
'Authorized value' is where you define an authorized value that your catalogers can choose from a pull down to fill this field in
لتحرير الحقول الفرعية المرتبطة بهذا الوسم، قم بالنقر على "الحقول الفرعية" على يسار الوسم في قائمة "بنية مارك"
من قائمة الحقول الفرعية تستطيع أن تنقر على 'حذف' على يسار كل منها لتحذف الحقول الفرعية
To edit the subfields click 'Edit subfields'
For each subfield you can set the following basic constraint values
نص من أجل المكتبي
ما يظهر قبل الحقل الفرعي في واجهة المكتبي
نص من أجل أوباك
ما يظهر قبل الحقل في الأوباك
إذا ما تُرِك فارغاً ، فإن النص ﻷمناء المكتبات سيستخدم
مكرر
الحقل سيكون لديه اشارة زائد بجانبه تسمح لك بإضافة عدد من هذه الوسيمة
إلزامى
التسجيلة لن يسمح لها أن تُحفظ في التاج حتى تقوم بتعيين قيمة لها
تُدار في تبويب
حدد التبويب الذي سيُعرض به الحقل الفرعي. كل الحقول الفرعية للحقل المُحدد يجب أن يكونوا في نفس التبويب أو أن يُتجاهلوا. التجاهل يعني أن الحقل الفرعي غير مُدار.
For each subfield you can set the following advanced constraint values
قيمة افتراضية
حدد ما الذي ترغب في أن يظهر في الحقل بشكل إفتراضي، وسيكون قابلاً للتعديل، ولكنه يحفظ لكَ الوقت ، إذا ما كنتَ تستخدم نفس الملاحظة مراراً وتكراراً أو نفس القيمة في الحقل بشكل غالب.
Note
If you would like a field to fill in with today's date you can use the YYYY MM DD syntax in the 'Default value'. For example: a default of "Year:YYYY Month:MM Day:DD" (without quotes) will print as "Year:2015 Month:11 Day:30"
الرؤية
يتيح لك تحديد إظهار/ إخفاء هذا الحقل الفرعي، قم ببساطة بتحديد المربعات حيث ترغب في ظهور الحقل وإلغاء تحديدها حيث ترغب في إخفائه
هو URL
إذا تم تحديده ، فهذا يعني أن الحقل الفرعي هو عنوان(URL) وقابل للنقر عليه
رابط
اذا قمت بادخال حقل/حقل فرعي هنا (200b)، يظهر رابط بعد الحقل الفرعي في عرض تفاصيل مارك. هذا العرض يظهر فقط في عميل الموظفين، ليس في الأوباك. اذا قام المكتبي بالنقر على الرابط، سيتم البحث في قاعدة البيانات من أجل الحقل/الحقل الفرعي لنفس القيمة. هذه يمكن أن تُستخدم من أجل موضوعين رئيسيين :
في حقل مثل المؤلف (200f في يونيمارك ) ضع 200f هنا ، وسيكون بإمكانك أن ترى كل التسجيلات الببليوغرافية التي تعود لنفس المؤلف.
في الحقل الذي يوجد فيه رابط بـ (4xx) للوصول إلى تسجيلة ببليوغرافية أخرى. على سبيل المثال ، ضع 011a في 464$x ، سيعثر لك على الدوريات التي تنتمي لهذا الردمد (ISSN).
Warning
تحذير: يجب عدم تغيير هذه القيمة بعد إضافة البيانات إلى فهرسك. إذا كنت بحاجة إلى تغيير هذه القيمة يجب أن تطلب من مدير نظامك تشغيل misc/batchRebuildBiblioTables.pl.
رابط كوها
كوها يتوافق مع صيغ متعددة من مارك. لذلك هو لا يعرف ما يعني 245$a ، ولا ما يعني 200$f ( هذان الحقلان للعنوان في مارك21 واليونيمارك).لذلك ، في هذه القائمة بإمكانك أن تقوم"بتعيين" حقل مارك الفرعي إلى معانيه. ويحافظ كوها بشكل مستمر على التناسق بين الحقول الفرعية ومعانيها. وعندما يرغب المستفيد بالبحث بـِ"العنوان"، فإن الرابط يستخدم للعثور عن ما تم البحث عنه في (245 إذا كان مارك21 ، أو 200 إذا كان يونيمارك).
يمكنك ضبط قيم الخيارات أخرى التالية لكل حقل فرعي
قيمة الاستناد
means the value cannot by typed by the librarian, but must be chosen from a pull down generated by the authorized value list
In the example above, the 504a field will show the MARC504 authorized values when cataloging
مكنز
يعني أن القيمة ليست نصاً حراً ، ولكن يجب أن يُبحث عنها في مكنز/الإستناد الخاص بالفئة المحددة
ملحق مساعد
يعني أن القيمة تم حسابها أو إدارتها من خلال برنامج مساعد . البرنامج المساعد يستطيع القيام غالباً بأي شيء.
أمثلة:
For call numbers there is an option to add a call number browser next to the the call number subfield so that you can identify which call numbers are in use and which are not. Simply choose the cn_browser.pl plugin. Learn more in the cataloging section of this manual.
If you'd like to let file uploads via cataloging you can choose the upload.pl plugin and this will allow you to upload files to Koha to link to your records.
In UNIMARC there are plugins for every 1xx fields that are coded fields. The plugin is a huge help for cataloger! There are also two plugins (unimarc_plugin_210c and unimarc_plugin_225a that can "magically" find the editor from an ISBN, and the collection list for the editor)
To save your changes simply click the 'Save changes' button at the top of the screen
Import/export frameworks
بجانب كل إطار يوجد رابط لاستيراد أو تصدير الإطار
Export framework
لتصدير إطار قم ببساطة بالنقر على رابط "تصدير" على يسار عنوان الإطار
حين تقوم بالنقر على "تصدير" ستظهر لك رسالة لاختيار التصدير الذي تريد تصدير الملف به
يمكن استيراد الإطار الذي تم تصديره بهذه الطريقة إلى أي من تثبيتات كوها الأخرى باستخدام خيار استيراد الإطار
Import framework
An easy way to create a new framework is to import one created for your or another Koha installation. This framework would need to be exported from the other system using the instructions above to be available for import here.
To import a framework you first need to create a new framework. Once you have that framework, click 'Import' to the right of the new framework.
ستظهر لك رسالة بالعثور على ملف على حاسوبك لاستراده إلى الإطار
ٍسيطلب منك تأكيد إجراءاتك قبل استيراد الملف
بمجرد تحميل ملفك سترى صورة لتأكيد عمل النظام
بمجرد اكتمال استيرادك سيتم نقلك إلى أداة تحرير الإطار حيث يمكنك إجراء أي تغييرات تحتاجها في الإطار الذي قمت باستيراده
Koha to MARC mapping
While Koha stores the entire MARC record, it also stores common fields for easy access in various tables in the database. Koha to MARC mapping is used to tell Koha where to find these values in the MARC record. In many cases you will not have to change the default values set by in this tool on installation, but it is important to know that the tool is here and can be used at any time.
Get there: More > Administration > Catalog > Koha to MARC mapping
The table shows all the database fields that can be mapped to MARC fields.
To add a new mapping, click on the 'Add' button to the right of the appropriate field.
Write in the MARC field and subfield you would like to map, separated by a comma, to this Koha field and click the 'OK' button.
Note
It is possible to link more than one MARC field to a database field. For example, you could link both 260$a and 264$a to the biblioitems.place field.
If you would like to clear the mapping for a database field, click the 'Remove' button.
Note
All changes are immediate.
Keywords to MARC mapping
هذه الأداة تسمح لك بتعيين حقول مارك إلى مجموعة من الكلمات المفتاحية المحددة مسبقا.
Get there: More > Administration > Catalog > Keywords to MARC mapping
Important
This tool only affects sites that are not using the XSLT stylesheets.
في هذا الوقت فقط الكلمة المفتاحية المستخدمة هي 'عنوان فرعي'.
باستخدام هذه الأداة بإمكانك أن تعرِّف ما هي حقول مارك التي ستطبع في صفحة التفاصيل للتسجيلة الببليوغرافية باستخدام الكلمات المفتاحية. الأمثلة التالية سوف تستخدم الحقول الفرعية.
Using the framework pull down menu, choose the Framework you would like to apply this rule to. For example, the subtitle for books can be found in the 245$b field.
على أية حال العنوان الفرعي لِ الـDVDs يعرض في الحقل الفرعي 245$p
باستخدام هذه الأداة بإمكانك أن تخبر كوها أن يطبع الحقل الصحيح كأنه عنوان فرعي ، عند عرض التسجيلة الببليوغرافية في الأوباك.
يمكن استخدام هذه الأداة لسلسلة معا أيضاً أجزاء من التسجيلة. إذا كنت تريد أن عدد السلسلة لتظهر في عنوان على نتائج البحث لديك ببساطة 490 $v ل'العنوان الفرعي' جنبا إلى جنب مع 245 $b.
Note
سلسل معاً الحقول التي تريد أن تظهر بعد عنوان المادة في الترتيب الذي تريد أن يظهروا به.
سوف تشمل التطويرات المستقبلية كلمة مفتاحية إضافية معينه للحقول.
MARC bibliographic framework test
افحص بنية مارك.
Get there: More > Administration > Catalog > MARC bibliographic framework test
If you change your MARC bibliographic framework it's recommended that you run this tool to test for errors in your definition.
Authority types
Authority types are basically MARC frameworks for authority records and because of that they follow the same editing rules found in the MARC bibliographic frameworks section of this manual. Koha comes with many of the necessary authority frameworks already installed. To learn how to add and edit authority types, simply review the MARC bibliographic frameworks section of this manual.
Get there: More > Administration > Catalog > Authority types
Classification sources
Source of classification or shelving scheme is an Authorized values category that is mapped to field 952$2 and 942$2 in Koha's MARC bibliographic frameworks and stored in the items.cn_source field in the database.
Get there: More > Administration > Catalog > Classification sources
القيم المستخدمة عادة هذا الحقل هي:
ddc - تصنيف ديوي العشري
lcc - تصنيف مكتبة الكونغرس
اذا اخترت لتثبيت مصادر التصنيف خلال تثبيت كوها, سترى قيم أخرى أيضاً:
ANSCR (تسجيل صوتي)
تصنيف SuDOC
التصنيف العشري العالمي
آخر/التصنيف العام
Adding/editing classification sources
You can add your own source of classification by using the 'New classification source' button. To edit use the 'Edit' button.
عند الإنشاء أو التحرير:
ستحتاج إلى إدخال رمز ووصف.
افحص 'المصدر المستخدم?' لاختيار إذا كنت تريد أن تظهر القيمة في القائمة المنسدلة لهذه الفئة.
Select the appropriate filing rule from the drop down list.
Classification filing rules
تقوم قواعد التصنيف بتحديد الترتيب الذي ستتموضع على أساسه المواد على الأرفف.
القيم المهيئة مسبقاً في كوها هي :
ديوى
LCC
عام
Filing rules are mapped to Classification sources. You can setup new filing rules by using the 'New filing rule' button. To edit use the 'Edit' button.
عند الإنشاء أو التحرير:
إدخال رمز الوصف
اختر روتين التصنيف المناسب - ديوي ، العام أو الكونغرس
Record matching rules
قواعد مضاهاة التسجيلة تستخدم عندما يتم استيراد تسجيلات مارك إلى كوها
Get there: More > Administration > Catalog > Record matching rules
The rules that you set up here will be referenced with you Stage MARC records for import.
It is important to understand the difference between 'Match points' and 'Match checks' before adding new matching rules to Koha.
Match points are the criteria that you enter that must be met in order for an incoming record to match an existing MARC record in your catalog. You can have multiple match points on an import rule each with its own score. An incoming record will be compared against your existing records ('one record at a time') and given a score for each match point. When the total score of the match points matches or exceeds the threshold given for the matching rule, Koha assumes a good match and imports/overlays according your specifications in the import process. An area to watch out for here is the sum of the match points. Double check that the matches you want will add up to a successful match.
مثال:
حد المطابقة: 100
Match point on 020$a 1000
Match point on 022$a 1000
Match point on 245$a 500
Match point on 100$a 100
In the example above, a match on either the 020$a or the 022$a will result in a successful match. A match on 245$a title and 100$a author (and not on 020$a or 022$a) will only add up to 600 and not be a match. And a match on 020$a and 245$a will result in 1500 and while this is a successful match, the extra 500 point for the 245$a title match are superfluous. The incoming record successfully matched on the 020$a without the need for the 245$a match. However, if you assigned a score of 500 to the 100$a Match Point, a match on 245$a title and 100$a author will be considered a successful match (total of 1000) even if the 020$a is not a match.
Match checks are not commonly used in import rules. However, they can serve a couple of purposes in matching records. First, match checks can be used as the matching criteria instead of the match points if your indexes are stale and out of date. The match checks go right for the data instead of relying on the data in the indexes. (If you fear your indexes are out of date, a rebuild of your indexes would be a great idea and solve that situation!) The other use for a match check is as a 'double check' or 'veto' of your matching rule. For example, if you have a matching rule as below:
حد المطابقة: 100
Match point on 020$a 1000
Match check on 245$a
Koha will first look at the 020$a tag/subfield to see if the incoming record matches an existing record. If it does, it will then move on to the Match Check and look directly at the 245$a value in the incoming data and compare it to the 245$a in the existing 'matched' record in your catalog. If the 245$a matches, Koha continues on as if a match was successful. If the 245$a does not match, then Koha concludes that the two records are not a match after all. The Match Checks can be a really useful tool in confirming true matches.
When looking to create matching rules for your authority records the following indexes will be of use:
Index name |
Matches MARC tag |
---|---|
LC-cardnumber |
010$a |
الأسم الشخصي |
100$a |
Corporate-name-heading |
110$a |
Meeting-name |
111$a |
العنوان الموحد |
130$a |
Chronological-term |
148$a |
Subject-topical |
150$a |
Name-geographic |
151$a |
Term-genre-form |
155$a |
Table: Authority indexes
Adding matching rules
لإنشاء قاعدة مطابقة جديدة :
Click 'New record matching rule'
اختر اسم فريد و إدخاله في 'رمز حكم المطابقة' حقل
'الوصف' من الممكن أن يكون أي شيء تريد أن تجعله واضحاً بالنسبة لك عن قواعد التي قمتَ باختيارها
'حد المطابقة' - مجموع 'النقاط' التي يجب على التسجيلة أن تكسبها لكي تُعتَبر 'مطابقة'
'Record type' is the type of import this rule will be used for - either authority or bibliographic
نقاط المطابقة يتم ضبطها لتحديد ما هي الحقول التي ستتم المطابقة عليها
'Search index' can be found by looking at the ccl.properties file on your system which tells the zebra indexing what data to search for in the MARC data". Or you can review the index for standard index names used. فهارس البحث في نظام كوها
'النتيجة' - عدد 'النقاط' المستحقة المطابقة لهذا الحقل. إذا كان مجموع كل نتيجة أكبر من الحد الأدنى للمطابقة ، فإن التسجيلات المستوردة تُطابق التسجيلات الحالية
أدخل تاج مارك الذي تود أن تُطابقه في حقل 'التاج'
إدخال الحقل الفرعي لوسم مارك الذي تريد مطابقته على حقل "الحقول الفرعية '
'الأوفست'- للاستخدام مع حقول التحكم, 001-009
'الطول' للاستخدام مع الحقول المضبوطة ، 001-009
كوها يمتلك 'قاعدة تطبيع' واحدة والتي تحذف الأحرف الزائدة مثل الفواصل والفواصل المنقوطة. القيمة التي تدخلها في هذا الحقل لا صلة لها بعملية التطبيع.
'التحقق من التطابق مطلوب '- ؟؟
Sample bibliographic record matching rule: Control number
حد المطابقة: 100
ctype:b استنادات بيبلوغرافية
Note
If you'd like a rule to match on the 001 in authority records you will need the repeat all of these values and change just the record type to 'Authority record'
نقاط المطابقة( فقط الأولى) :
البحث في الكشاف : رقم التحكم
الهدف : 101
وسم: 001
Note
هذا الحقل للتحكم في العدد المعين بواسطة المنظمة التي قامت بإنشاء، استخدام، أو توزيع التسجيلة.
حقول فرعية: a
الأوفست: 0
الطول: 0
قاعدة تسوية: رقم-التحكم
Required match checks: none (remove the blank one)
OAI sets configuration
في هذه الصفحة بإمكانك إنشاء ، تعديل وحذف مجموعات OAI-PMH
أنشئ مجموعة
لانشاء مجموعة:
النقر على رابط 'إضافة ضبط جديد'
ملء الحقول الإجبارية 'setSpec' و 'setName'
ثم يمكنك إضافة الأوصاف لهذه المجموعة. للقيام بذلك، انقر على 'أضف وصف ' واملء مربع النص الذي تم إنشاؤه حديثا. يمكنك إضافة أوصاف كما تشاء.
اضغط على 'زر'حفظ'
Modify/delete a set
لتعديل المجموعة، فقط أنقر على وصلة 'عدل' على نفس السطرمن المجموعة التي تود تعديلها. حيث سيُعرض لك نموذج مشابه لنموذج إنشاء المجموعة ، سيتيح لك تعديل setSpec، setName والمواصفات.
لحذف مجموعة، فقط انقر على الرابط 'حذف' على نفس السطر من المجموعة التي تريد حذفها.
تعريف مخططات
هنا يمكنك ان تحدد كيف يمكن لمجموعة حصاد أن تبنى ( ما هي التسجيلات التي ستنتمي إلى هذه المجموعة) من خلال تعريف التعيينات. التعيينات هي قائمة من الشروط على محتوى التسجيلة. التسجيلة تحتاج أن تطابق شرطاً واحداً فقط لتنتمي للمجموعة.
املئ الحقول 'حقل', 'حقل فرعي' و'قيمة'. مثال اذا كنت تريد أن تُدرج في هذه المجموعة كل التسجيلات التي تمتلك 999$9 مساوي إلى 'XXX'. املئ 'حقل' مع 999, 'حقل فرعي' مع 9 و 'قيمة' مع XXX.
اذا كنت تريد إضافة شرط آخر, انقر على زر 'OR' و كرر المرحلة الأولى.
اضغط على 'حفظ'
لحذف شرط، فقط اترك واحد على الأقل من 'حقل'،'حقل فرعي' أو 'قيمة' فارغة وانقر على 'حفظ'.
Note
يكون الشرط صحيحاً في حال كانت القيمة في الحقل الفرعي المطابق تتساوى بدقة لما قمتَ بتحديده في القيمة. فتسجيلة بالقيم 999$9 = 'XXX YYY' لن تنتمي إلى ضبطك الذي شرطه هو 999$9 = 'XXX'.
وهي حساسة لحالة الحروف: فالتسجيلة التي تحوي 999$9 = 'xxx' لن ينتمي إلى المجموعة حيث الشرط هو 999$9 = 'XXX'.
بناء مجموعة
Once you have configured all your sets, you have to build the sets. This is done by calling the script misc/migration_tools/build_oai_sets.pl.
حقول بحث المواد
From here you can add custom search fields to the item search option in the staff client.
To add a new search term simply click the 'New search field' button
الاسم هو حقل لتعريف مصطلح البحث
الملصق هو ماسوف يظهر في صفحة بحث المادة
يتيح لك حقل مارك اختيار الحقل الذي ترغب في بحثه
حقل مارك الفرعي هو الحقل الفرعي الذي ترغب في بحثه
يمكن استخدام فئات قيم الاستناد لتحويل حقل البحث إلى قائمة منسدلة بدلا من حقل نص حر
بمجرد إضافة حقلك الجديد سيظهر أعلى هذه الصفحة وصفحة بحث المادة
التزويد
وحدة عمليات التزويد في كوها توفر وسيلة للمكتبة حيث يمكن أن تسجل طلبات الشراء مع الموردين وإدارة ميزانيات الشراء.
قبل إستخدامك لوحدة التزويد ، عليك أن تكون على ثقة من أنك قد أتممتَ ضبط كل الإعدادات.
Get there: More > Administration > Acquisitions
Currencies and exchange rates
اذا وضعت أوامر من أكثر من بلد واحد ستحتاج إلى ادخال أسعار صرف العملات لذلك وحدة التزويد ستحسب الاجماليات بشكل صحيح.
Get there: More > Administration > Acquisitions > Currencies and exchange rates
Note
لا يتم تحديث هذه البيانات تلقائيا، لذلك يجب التأكد من المحافظة على حداثتها بحيث تبقى حساباتك صحيحة.
سيتم استخدام رمز الأيزو الذي قمت بإدخاله عند استيراد ملفات مارك عبر أدوات التنظيم، ستحاول الأداة العثور على سعر العملة النشطة حاليا واستخدامها
العملة النشطة هي العملة الرئيسية التي تستخدم في المكتبة. وعملتك النشطة لها علامة الاختيار في العمود 'فعّل'. إذا لم يكن لديك عملة نشطة سترى رسالة خطأ تخبرك باختيار العملة النشطة.
الميزانيات
Budgets are used for tracking accounting values related to acquisitions. For example you could create a budget for the current year (ex. 2015) and then break that into التمويلات for different areas of the library (ex. Books, Audio, etc).
Get there: More > Administration > Acquisitions > Budgets
عند زيارة الادارة الرئيسية للميزانية سوف ترى تبويبان، واحد لتنشيط الميزانيات وآخر لعدم تنشيط الميزانيات.
Adding budgets
Budgets can either be created from scratch, by duplicating the previous year's budget or by closing a previous year's budget.
Add a new budget
If you haven't used Koha before for acquisitions then you'll need to start fresh with a new budget. To add a new budget click the 'New budget' button.
اختر المدة الزمنية التي تمتد عليها هذه الميزانية ، وإذا ما كانت سنة دراسية ، سنة مالية ، أو ميزانية فصلية ...الخ.
The description should be something that will help you identify the budget when ordering
في حقل المبلغ لا تستخدم أي رموز ، ببساطة أدخل مبلغ الميزانية مع الأرقام والكسور العشرية.
تحديد الميزانية بأنها 'نشطة' سيجعلها قابلة للاستخدام عند إجراء الطلبات في وحدة التزويد ، حتى إذا ما تمَّ عمل الطلب بعد نهاية تاريخ الميزانية. هذا سيسمح لك أن تسجل الطلبات التي عُمِلت في فترة لميزانية سابقة.
Locking a budget means that funds will not be able to be modified by librarians
Once you have made your edits, click the 'Save changes' button. You will be brought to a list of your existing budgets.
Duplicate a budget
لنسخ ميزانية من العام السابق، قم بالنقر على رابط اسم الميزانية من قائمة الميزانيات
On the screen listing the budget breakdown click the 'Edit' button at the top and choose to 'Duplicate budget'
كما يمكنك النقر على زر "إجراءات" على يمين الميزانية واختيار "نسخ"
في كلتي الحالتين سيظهر لك نموذج حيث يجب عليك ببساطة إدخال تاريخ البدء وتاريخ الانتهاء الجديدين به وحفظ الميزانية
قم بتحديد مربع "تحددي الميزانية الأصلية غير نشطة" إذا لم يعد يجب استخدام الميزانية الأصلية
قم بتحديد مربع "ضبط كل التمويلات إلى صفر" إذا كنت ترغب في أن تحتوي الميزانية الجديدة على جميع بنيات التمويل مثل الميزانية السابقة لكن بدون تجميعات حتى تقوم يدويا بإدخال مبلغ في التمويل.
لن يقوم ذلك بنسخ ميزانيتك فقط، لكن جميع التمويلات المرتبطة بهذه الميزانية لكي تتمكن من إعادة استخدام الميزانيات والتمويلات من عام إلى عام ولكي تتمكن من نقل الطلبيات غير المستلمة والتمويلات غير المنفقة من ميزانية سابقة إلى الميزانية الجديدة.
إغلاق ميزانية
Close a budget to move or roll over unreceived orders and if desired unspent funds from a previous budget to a new budget. Before closing your budget you might want to duplicate the previous year's budget so that you have somewhere for the unreceived orders to roll to.
قم بالبحث عن الميزانية السابقة ذات الطلبيات غير المستلمة من تبويب الميزانيات النشطة أو الميزانيات غير النشطة وتحديد "إغلاق" أدنى "إجراءات"
Note
In order for the unreceived orders to be automatically moved to the new budget, the fund structures in the previous budget must exist in the new budget. Budgets without unreceived orders cannot be closed.
عند قيامك بتحديد "إغلاق" سيظهر لك نموذج.
قم باستخدام قائمة "تحديد ميزانية" المنسدلة لاختيار الميزانية الجديدة للطلبيات غير المستلمة
قم بتحديد مربع "نقل التمويلات غير المنفقة المتبقة" لنقل المبالغ غير المنفقة من تمويلات الميزانية الجاري إغلاقها إلى الميزانية المحددة
بمجرد القيام بالاختيارات، قم بالنقر على زر "نقل الطلبيات غير المستلمة". سيظهر لك مربع حواري يقول "لقد قمت باختيار نقل جميع الطلبيات غير المستلمة من "الميزانية س" إلى "الميزانية ص". لا يمكن التراجع عن هذا الإجراء. هل ترغب في الاستمرار؟" الميزانية س هي الميزانية التي سيتم إغلاقها والميزانية ص هي الميزانية المحددة.
إذا بدا كل شيء جيداً قم بالنقر على "موافق" وسيتم نقل الطلبيات غير المستلمة والتمويلات غير المنفقة إذا تم تحديدها
انتظر حتى يتم عرض "تقرير بعد نقل الطلبيات غير المستلمة من الميزانية س إلى ص". سيقوم ذلك بإدراج أرقام الطلبية التي تم تجميعها بواسطة التمويل وتفاصيل ما إذا تم نقل الطلبيات غير المستلمة أم أن هناك مشكلة. على سبيل المثال: إذا لم تكن الميزانية الجديدة تحتوي على تمويل بنفس الاسم كالميزانية السابقة فلن يتم نقل الطلبية.
التمويلات
Get there: More > Administration > Acquisitions > Funds
إضافة تمويل
تمت إضافة التمويل إلى الميزانية
Important
A budget must be defined before a fund can be created.
To add a new fund click the 'New' button and then choose which budget you would like to add the fund to.
يجب عليك إدخال المعلومات الأساسية حول تمويلك في النموذج الذي سيظهر لك
الحقول الثلاثة الأولى مطلوبة، والباقي اختيارية.
Fund code is a unique identifier for your fund
The fund name should be something that librarians will understand
يجب إدخال المبلغ بالأرقام والعلامات العشرية فقط، وليس بأي أحرف أخرى.
تحذير عند (%%) أو تحذير عند (مبلغ) يمكن ملؤه ليقوم كوها بتحذيرك قبل إنفاق نسبة مئوية أو مبلغ معين من ميزانيتك. سيمنعك ذلك من الإنفاق الزائد عن الحد.
You can choose to assign this fund to a librarian. Doing so will make it so that only that librarian can make changes to the fund
قم باختيار المكتبة التي ستستخدم هذا التمويل
يمكنك تحديد من يمكنه الطلب من هذا التمويل عن طريق اختيار "المالك"،"المالك والمستخدمين" أو "المالك،المستخدمين والمكتبة" من قائمة "قيد الوصول"
Important
هام: بدون مالك، سيتم تجاهل قيد الوصول، تأكد من إدخال مالك وكذلك اختيار قيد
الملاحظات هي ببساطة لأي ملاحظات وصفية قد ترغب في إضافتها ليعرف موظفو المكتبة متى يمكنهم استخدام هذا التمويل
Planning categories are used for statistical purposes. If you will be using the Asort1 and/or Asort2 authorised values lists to track your orders you need to select them when setting up the fund. Select the Asort1/Asort2 option from the dropdown lists for the Statiscal 1 done on: and Statistical 2 done on: fields.
To learn more about planning categories, check out the Planning category FAQ.
عند الانتهاء، قم باللنقر على "إرسال" وسوف تظهر لك قائمة بكافة تمويلات الميزانية.
The monetary columns in the fund table break down as follows:
Base-level allocated is the 'Amount' value you defined when creating the fund
Base-level ordered is the ordered amount for this fund (without child funds)
Total ordered is the base-level ordered for this fund and all its child funds
Base-level spent is the spent amount for this fund (without child funds)
Total spent is the base-level spent for this fund and all its child funds
Base-level available is 1 - 2
Total available is 1 - 3
To the right of each fund you will find the 'Actions' button under which you will find the 'Edit,' 'Delete,' and 'Add child fund' options.
A child fund simply a sub-fund of the fund listed. An example would be to have a fund for 'Fiction' and under that have a fund for 'New releases' and a fund for 'Science Fiction.' It is an optional way to further organize your finances.
التمويلات ذات التمويلات الفرعية ستظهر بسهم صغير جهة اليسار. عند النقر عليه ستظهر التمويلات الفرعية.
Budget planning
أثناء عرض قائمة التمويلات، قم بالنقر على زر "تخطيط" واختيار كيف ترغب في تخطيط إنفاق ميزانيتك.
إذا ما اخترتَ 'خطط بالشهر' فإنكَ سترى المبلغ المدرج بالميزانية مقسَّم حسب الشهور:
To hide some of the columns you can click the 'hide' link to the right (or below as in the screenshot above) the dates. To add more columns you can click the 'Show a column' link found below the 'Fund remaining' heading.
من هنا ، يمكنك أن تخطط إنفاق ميزانيتك من خلال الإدخال اليدوي للقيم ، أو من خلال النقر على زر 'الملئ التلقائي للصف'. إذا ما اخترت أن يتم الملئ التلقائي للنموذج ، فإن النظام سيقوم بتقسيم المبلغ طبقاً لذلك, قد تضطر الى إجراء بعض التعديلات لتقسيم الطلبات لمزيد من الدقة
عندما يتم إجراء تغييراتك ، أنقر على زر 'حفظ'. إذا ما رغبت أن تُصدِّر بياناتك كملف بصيغة CSV ، أدخل اسم الملف في حقل 'الإخراج إلى الملف المسمى' ومن ثم أنقر على زر 'إخراج'.
EDI accounts
From here you can set up the information needed to connect to your acquisitions vendors.
Note
Before you begin you will need at least one Vendor set up in Acquisitions.
To add account information click the 'New account' button.
In the form that appears you will want to enter your vendor information.
New account information
سوف يحصل كل مورد على حساب واحد.
المكتبة EANs
EAN هو المعرف الذي يمنحه المورد للمكتبة لارسله لهم من أجل معرفة أي الحسابات يسخدم عند ارسال الفاتورة للمكتبة. حساب EDI واحد يمكنه احتواء عدة EANs.
To add an EAN click the 'New EAN' button.
New EAN
In the form that appears enter the information provided by your vendor.
New EAN form
Additional parameters
Get there: More > Administration > Additional parameters
خوادم Z39.50/SRU
Z39.50 is a client/server protocol for searching and retrieving information from remote computer databases, in short it's a tool used for copy cataloging.
SRU- Search/Retrieve via URL - is a standard XML-based protocol for search queries, utilizing CQL - Contextual Query Language - a standard syntax for representing queries.
Using Koha you can connect to any Z39.50 or SRU target that is publicly available or that you have the log in information to and copy both bibliographic and/or authority records from that source.
Get there: More > Administration > Additional parameters > Z39.50/SRU servers
Koha comes with a default list of Z39.50/SRU targets set up that you can add to, edit or delete
To find additional Z39.50 targets you use IndexData's IRSpy: http://irspy.indexdata.com [http://irspy.indexdata.com/] or the Library of Congress's list of targets http://www.loc.gov/z3950/
Add a Z39.50 target
From the main Z39.50 page, click 'New Z39.50 server'
يجب ملء "خادم Z39.50" باسم يساعدك في التعرف على المصدر (كاسم المكتبة)
"اسم المضيف" سيكون عنوان هدف Z39.50
"المنفذ" يخبر كوها حول المنفذ الذي سيتسخدمه للحصول على نتائج من هذا الهدف.
معرِّف المستخدم وكلمة المرور هما فقط المطلوبان للخوادم المحمية بكلمة المرور
Check the 'Preselected' box if you want this target to always be selected by default.
'الرتبة' يتيح لك إدخال المكان الذي تريد ظهور الهدف فيه في القائمة
إذا تم تركه فارغاً ستكون الأهداف مرتبة ترتيباً أبجدياً
'الجملة' هو نوع مارك الذي تستخدمه
"الترميز" يخبر النظام عن كيفية قراءة الأحرف الخاصة
'Timeout'مفيد للأهداف التي تستغرق وقتاً. يمكنك ضبط الوقت المستقطع لكي لا يستمر في تجربة الهدف إذا لم يتم العثور على النتائج خلال وقت معقول.
'نوع التسجيلة' يتيح لك تعريف ما إذا كان هذا الهدف هدفاً بيبلوغرافياً أم استنادياً
'XSLT file(s)' lets enter one or more (comma-separated) XSLT file names that you want to apply on the search results.
When retrieving records from external targets you may wish to automate some changes to those records. XSLT's allow you to do this. Koha ships with some sample XSLT files in the /koha-tmpl/intranet-tmpl/prog/en/xslt/ directory ready for use:
Del952.xsl: حذف المواد (MARC21/NORMARC)
Del995.xsl: حذف المواد (UNIMARC)
Del9LinksExcept952.xsl: Remove $9 links. Skip item fields (MARC21/NORMARC)
Del9LinksExcept995.xsl: Remove $9 links. Skip item fields (UNIMARC)
Suggested bibliographic Z39.50 targets
Koha libraries with open Z39.50 targets can share and find connection information on the Koha wiki: http://wiki.koha-community.org/wiki/Koha_Open_Z39.50_Sources. You can also find open Z39.50 targets by visiting IRSpy: http://irspy.indexdata.com.
الأهداف التالية استخدمت بنجاح من قبل مكتبات اخرى تستخدم نظام كوها (في الأمريكتين)
ACCESS PENNSYLVANIA 205.247.101.11:210 INNOPAC
CUYAHOGA COUNTY PUBLIC webcat.cuyahoga.lib.oh.us:210 INNOPAC
GREATER SUDBURY PUBLIC 216.223.90.51:210 INNOPAC
HALIFAX PUBLIC catalogue.halifaxpubliclibraries.ca:210 horizon
HALTON HILLS PUBLIC cat.hhpl.on.ca:210 halton_hills
مكتبة الكونجرس lx2.loc.gov: 210 LCDB
مكتبة لندن العامة catalogue.londonpubliclibrary.ca:210 INNOPAC
MANITOBA PUBLIC library.gov.mb.ca:210 horizon
MILTON PL cat.mpl.on.ca:210 horizon
NATIONAL LIBRARY OF WALES cat.llgc.org.uk:210 default
NHUPAC 199.192.6.130:211 nh_nhupac
OCEAN STATE LIBRARIES (RI) catalog.oslri.net:210 INNOPAC
OHIOLINK olc1.ohiolink.edu:210 INNOPAC
PUBCAT prod890.dol.state.vt.us:2300 unicorn
SAN JOAQUIN VALLEY PUBLIC LIBRARY SYSTEM (CA) hip1.sjvls.org:210 ZSERVER
SEATTLE PUBLIC LIBRARY ZSERVER.SPL.ORG:210 HORIZON
تورونتو العامة symphony.torontopubliclibrary.ca:2200 اليونيكورن
TRI-UNI 129.97.129.194:7090 voyager
VANCOUVER PUBLIC LIBRARY z3950.vpl.ca:210 Horizon
أهداف استناد Z39.50 المقترحة
الأهداف التالية استخدمت بنجاح من قبل مكتبات اخرى تستخدم نظام كوها (في الأمريكتين)
LIBRARIESAUSTRALIA AUTHORITIES z3950-test.librariesaustralia.nla.gov.au:210 AuthTraining Userid: ANLEZ / Password: z39.50
استنادات اسم مكتبة الكونجرس lx2.loc.gov:210 NAF
استنادات موضوع مكتبة الكونجرس lx2.loc.gov:210 SAF
Add a SRU target
From the main Z39.50/SRU page, click 'New SRU server'
يجب ملء "اسم الخادم" باسم يساعدك في التعرف على المصدر (كاسم المكتبة)
"اسم المضيف" سيكون عنوان هدف Z39.50
"المنفذ" يخبر كوها حول المنفذ الذي سيتسخدمه للحصول على نتائج من هذا الهدف.
معرِّف المستخدم وكلمة المرور هما فقط المطلوبان للخوادم المحمية بكلمة المرور
Check the 'Preselected' box if you want this target to always be selected by default.
'الرتبة' يتيح لك إدخال المكان الذي تريد ظهور الهدف فيه في القائمة
إذا تم تركه فارغاً ستكون الأهداف مرتبة ترتيباً أبجدياً
'الجملة' هو نوع مارك الذي تستخدمه
"الترميز" يخبر النظام عن كيفية قراءة الأحرف الخاصة
'Timeout'مفيد للأهداف التي تستغرق وقتاً. يمكنك ضبط الوقت المستقطع لكي لا يستمر في تجربة الهدف إذا لم يتم العثور على النتائج خلال وقت معقول.
'Additional SRU options' is where you can enter additional options of the external server here, like sru_version=1.1 or schema=marc21, etc. Note that these options are server dependent.
'SRU Search field mapping' lets you add or update the mapping from the available fields on the Koha search form to the specific server dependent index names.
للمزيد من التنقيح لبحثك، يمكنك إضافة أسماء الفهارس التالية إلى تخطيطات حقل بحث SRU. للقيام بذلك، قم بتحرير الخادم والنقر على زر تعديل بجانب هذا الحقل.
عنوان
dc.title
تدمك
bath.isbn
أي
cql.anywhere
مؤلف
dc.author
تدمد
bath.issn
موضوع
dc.subject
معرف قياسي
bath.standardIdentifier
Table: SRU mapping
'XSLT file(s)' lets enter one or more (comma-separated) XSLT file names that you want to apply on the search results.
When retrieving records from external targets you may wish to automate some changes to those records. XSLT's allow you to do this. Koha ships with some sample XSLT files in the /koha-tmpl/intranet-tmpl/prog/en/xslt/ directory ready for use:
Del952.xsl: حذف المواد (MARC21/NORMARC)
Del995.xsl: حذف المواد (UNIMARC)
Del9LinksExcept952.xsl: Remove $9 links. Skip item fields (MARC21/NORMARC)
Del9LinksExcept995.xsl: Remove $9 links. Skip item fields (UNIMARC)
هل تعني؟
Get there: More > Administration > Additional parameters > Did you mean?
Koha can offer 'Did you mean?' options on searches based on values in your authorities.
Important
Did you mean? only works in the OPAC at this time. The intranet options are here for future development.
بإستخدام هذه الصفحة بإمكانك أن تتحكم بالخيارات التي يعطيها كوها للمستفيدين في نتائج بحثهم .
لِتُشغِّل شريط 'هل تقصد؟' في نتائج بحثك تحتاج أن تختار مربع الإختيار بجانب كل إضافة ترغب بإستخدامها. الإضافتان الَّتان ينبغي أن تختار منهما هما:
الإضافة البرمجية المسماة ExplodedTerms تقترح على المستفيد أنه يُحاول أن يبحث عن مصطلح أعرض أو أضيق أو متعلق للبحث المقصود (مثال: في حال بحث المستخدم عن "نيويورك(الولاية)" قد ينقر على وصلة تضييق المصطلحات إذا ما كان مهتماً أيضاً بـ "نيويورك(المدينة)". هذا يتعلق فقط بالمكتبات ذات البيانات الإستنادية عالية الضبط هرمياً.
الإضافة البرمجية AuthorityFile للملف الإستنادي تبحث في الملف الإستنادي وتقترح ما من الممكن أن يجذب إهتمام المستخدم من التسجيلات الببليوغرافية المرتبطة بالإستنادات
إذا ما أردتَ أن تأخذ إحدى الإضافات الأولوية فوق الأخرى ببساطة أسحبها فوق الإضافات الأخرى.
If you choose both plugins you will see several options at the top of your search results
If you choose just the AuthorityFile you'll see just authorities.
Column settings
سوف يساعدك قسم الإدارة في إخفاء أو عرض الأعمدة في الجداول الثابتة عبر برنامج العميل.
Get there: Administration > Additional parameters > Column settings
النقر على النظام الفرعي الذي ترغب في تحرير الجداول له سيعرض الخيارات المتاحة لك.
This area lets you control the columns that show in the table in question. If nothing is hidden you will see no check marks in the 'is hidden by default' column.
And will see all of the columns when viewing the table on its regular page.
If columns are hidden they will have checks in the 'is hidden by default' column.
And hidden when you view the table.
You can also toggle columns using the 'Show/hide columns' button in the top right of the page
Note
Any tables with columns listed here have the option to export to Excel, export to CSV, copy, or print within the table header
تنبيهات صوتية
If you have your AudioAlerts preference set to 'Enable' you will be able to control the various alert sounds that Koha uses from this area.
Get there: More > Administration > Additional parameters > Audio alerts
Each dialog box in Koha has a CSS class assigned to it that can be used as a selector for a sound.
You can edit the defaults by clicking the 'Edit' button to the right of each alert.
You can assign alerts to other CSS classes in Koha by entering that information in the selector box. For example if you enter
body:contains('Check in message')
Then when you visit the checkin page you will hear an alert.
Every page in Koha has a unique ID in the body tag which can be used to limit a sound to a specific page
Any ID selector (where HTML contains id="name_of_id" ) and can also be a trigger as: #name_of_selector
مقدمي خدمة الرسائل النصية القصيرة
Important
This option will only appear if the SMSSendDriver preference is set to 'Email'
From here you can enter as many cellular providers as you need to send SMS notices to your patrons using the email protocol.
Some examples in the US are:
Mobile Carrier |
SMS Gateway Domain |
---|---|
Alltel |
sms.alltelwireless.com |
AT&T |
txt.att.net |
Boost Mobile |
sms.myboostmobile.com |
Project Fi |
msg.fi.google.com |
Republic Wireless |
text.republicwireless.com |
Sprint |
messaging.sprintpcs.com |
T-Mobile |
tmomail.net |
U.S. Cellular |
email.uscc.net |
Verizon Wireless |
vtext.com |
Virgin Mobile |
vmobl.com |
Table: SMS provider examples
To add new providers enter the details in the form and click 'Add new' to save.
These options will appear in the OPAC for patrons to choose from on the messaging tab if you have EnhancedMessagingPreferences enabled.