OPAC

Search results

To search the OPAC you can either choose to enter your search words in the box at the top of the OPAC or click on the “Advanced search” link to perform a more detailed search.

Library catalog search box at the top of the page in the OPAC

Note

For more on searching check the Searching chapter in this manual.

Results overview

Search results list in the OPAC, facets are on the left

After performing a search, the number of results found for the search will appear above the results.

By default, the search results are sorted based on the OPACdefaultSortField and OPACdefaultSortOrder system preference values. To change the sort order of these results, you can choose another sorting method from the drop-down menu on the right.

The sorting drop-down menu offers various options to sort the search results, such as relevance, popularity, author, call number, publication or copyright date, acquisition date, and title

Under each title in the results list, there will be a series of values from the record’s leader (field 000).

A single search result in the OPAC, visible is a checkbox on the left, some bibliographic information, the title being a link, availability of items, star ratings, place hold option, place recall option, save to lists option and add to cart option

Note

These values have nothing to do with the item types or collection codes you have applied to your records or items. This data is all pulled from the record’s control fields.

This can be turned on or off with the DisplayOPACiconsXSLT system preference.

Below each title, there will be the availability for the items attached to the record.

Note

Even if you filtered on one library location, all locations that hold the item will appear on the search results.

Avertissement

An item’s hold status does not affect whether or not the item is “available” until the item is in “waiting” status. Items with on-shelf holds will show as available until a staff member has pulled them from the shelf and checked the item in make it show “waiting”.

If any enhanced content system preferences are turned on, there may be cover images next to the search results.

If Did you mean? options are set, there will be a yellow bar across the top of your results will other related searches.

image943

If you performed an advanced search you see an option to go back and edit your advanced search blow the list of results pages.

image1295

Filtres

To filter your results click on the links below the “Refine your search” menu on the left of your screen

image944

Depending on your setting for the DisplayLibraryFacets system preference you will see filters for your home, holding or both libraries.

image1296

Après avoir cliqué sur une facette, vous pouvez supprimer ce filtre et revenir à la liste complète des résultats en cliquant sur le petit “x” qui apparaît sur la droite de la facette.

image1297

Search RSS feeds

You will be able to subscribe to your search results as an RSS feed by clicking the RSS icon in your address bar or next to the number of results. To learn more about what RSS feeds are check out this tutorial video.

Search results list in the OPAC, facets are on the left

L’intérêt de vous abonner à un flux RSS consiste à être informé des nouveaux documents qui s’ajoutent dans le catalogue dans le domaine de votre choix.

Bibliographic record

Lorsque vous cliquez sur un titre des résultats de recherche, vous serez basculé sur la notice bibliographique détaillée. Cette page est organisée en plusieurs parties.

En haut de l’écran s’affiche le titre et le GMD:

image946

Le nom des titres est affiché juste en dessous. Ils sont définis dans les champs 1xx et 7xx. Si vous cliquez sur l’auteur, ceci lancera une recherche de tous les documents de cet auteur.

image947

Si vous avez un fichier d’autorité, vous verrez une petite loupe à droite des autorités de l’auteur (ou des autres). Si vous cliquez sur cette loupe, cela vous basculera directement sur la notice d’autorité.

image948

If you have your DisplayOPACiconsXSLT preference set to “show” you will see a material type that is determined by values in your fixed fields (learn more in the XSLT material type icons cataloging guide.

image949

Vous verrez ensuite les zones de description de la notice:

image950

Parmi ces informations, vous trouverez les vedettes sujet sur lesquelles vous pouvez cliquer pour rechercher d’autres titres associés ou des sujets similaires

image951

If your record has a table of contents or summary it will appear next to the “Summary” or “Table of contents” label

image952

If your record has data in the 856 fields you’ll see the links to the right of the “Online resources” label

image953

Si le titre que vous êtes en train de consulter est sur une liste publique, vous verrez une liste à droite de la mention “Liste(s) où l’exemplaire apparaît”. Et si votre notice est associée à des tags (mots-clés), ils apparaîtront sous la mention “Tags de cette bibliothèque”

image954

Dans les onglets situés sous les détails de la notice, vous trouverez toutes les informations de l’exemplaire

image955

Note

  • You can customize the columns of this table in the “Table settings” section of the Administration module (table id: holdingst).

Any notes (5xx fields) that have been cataloged will appear under “Title notes”

image956

If the bibliographic record is linked to a subscription in the Serials module, there will be a “Subscriptions” tab with the subscription and issues information.

image1498

Note

  • You can customize the columns of this table in the “Table settings” section of the Administration module (table id: subscriptionst).

Si vous autorisez les commentaires, ils s’afficheront dans l’onglet suivant

image957

If the OPACAuthorIdentifiers system preference is turned on, and that your author authority records have standard identifiers, there will be an “Author identifiers” tab showing the identifiers with links to the author record on the source website.

The detailed view of a bibliographic record, the selected tab at the bottom is Author identifiers, both authors are listed with their Scopus ID

Enfin, si vous avez activé FRBR et que vous avez d’autres éditions du titre dans votre collection, vous les verrez dans l’onglet “Editions”.

image958

A droite des détails, vous trouverez une série de cases. La première case contient plusieurs boutons aidant à naviguer dans les résultats de recherche. Depuis ici, vous pouvez voir le prochain ou le précédent résultat de votre recherche ou revenir aux résultats.

image959

Clicking “Browse results” at the top of the right column will open up your search results on the detail page

image960

Below the search buttons you’ll find the links to place a hold, print the record, save the record to your lists, add it to your cart or send to a device (using a QR code).

Another option that will appear on this right hand side bar, if a library is allowing purchase suggestions (see the suggestion system preference), is the ability to “Suggest for Purchase”. Clicking this link will bring the user to the purchase suggestion form to fill out.

List of options: Place hold, Place recall, Print, Request article, Save to your lists, Add to your cart, Suggest for purchase, Save record, More searches

Clicking “More searches” will show the list of libraries you entered in your OPACSearchForTitleIn preference

image962

Under the “Save record” label you will find a series of file formats you can save the record as. This list can be customized by altering the OpacExportOptions system preference.

image963

Il est possible d’activer jusqu’à trois modes d’affichage du détail bibliographique : “Normal”, MARC et ISBD. Pour cela, cliquez sur les onglets situés tout en haut de la notice

image964

Lists and the cart

A cart is a temporary holding place for records you’re interested in finding during this session. That means that once you log out of the OPAC or close the browser you lose the items in your cart. A list is a more permanent location for saving items. To learn more about lists, check the Lists in the staff client chapter of this manual.

Listes

Patrons can manage their own private lists by visiting the “your lists” section of their account.

image965

Creating lists

Lists can also be created by choosing the “New list” option in the “Add to” menu on the search results

image966

To create a list the patron simply needs to click the “New list” link and populate the form that appears

image967

The only field required is the “List name,” but the patron can also choose how they want the list sorted and if the list is public or private.

  • A private list is managed by you and can be seen only by you (depending on your permissions settings below)

  • A public list can be seen by everybody, but managed only by you (depending on your permissions settings below)

    Important

    If you aren’t allowing patrons to create public lists with the OpacAllowPublicListCreation preference then patrons will only be able to create private lists.

    image968

  • Pour finir, décidez quelles autorisations seront sur la liste. Vous pouvez autorisez ou interdire:

    • à une autre personne d’ajouter des entrées

    • à une autre personne de supprimer ses propres entrées

      • Note

        Le propriétaire d’une liste est toujours autorisé à ajouter des entrées, mais il doit avoir les droits pour les retirer.

    • n’importe qui à supprimer d’autres entrées proposées.

Adding titles to lists

Les titres peuvent être ajoutés aux listes à partir des résultats de recherche et/ou de la notice bibliographique. Les options pour ajouter des documents à la liste, apparaissent sous chaque résultat et dans la partie supérieure de la page des résultats

image969

To add a single title to a list, click the “Save to lists” option and then choose the list you’d like to add the title to. To add multiple titles to a list check the boxes on the left of the titles you want to add and then choose the list you want to add the titles to from the “Add too” pull down at the top of the screen.

Viewing lists contents

To view the contents of a list, click on the list name under the “Lists” button.

image970

Le contenu de la liste sera similaire aux pages de résultats de recherche sauf qu’il y aura différentes options situées en haut de la liste.

image971

À la droite du titre de la liste, il y a une icône de fil RSS qui vous permettra de vous abonner aux mises à jour de la liste.

Si vous utilisez les options situées au-dessus de la liste, vous pouvez réserver plusieurs documents , télécharger le contenu de la liste, envoyer par e-mail la liste ou l’imprimer.

  • To place a hold on one or more list items check the box to the left of the item and click the “Place hold” link at the top

  • To download the list contents click the “Download list” link and choose the format you’d like to download the list in

  • To email the list contents to someone, click the “Send list” link and enter in your email details in the form that pops up

    image972

  • To print the contents of your list out click the “Print list” link

Managing lists

Once the list is saved patrons can begin adding items to it. From the “your lists” tab on the patron record the patron can edit and delete the lists they have created by clicking the appropriate link to the right of the list name.

image973

Pour modifier le titre des listes ou le tri des adhérents, cliquez sur le lien “Modifier”.

image974

Lorsque vous cliquez sur “Supprimer” à côté d’une liste, il vous sera demandé de confirmer la suppression de la liste.

image975

La liste ne sera pas supprimée tant que vous n’aurez pas cliqué sur le bouton “Confirmer” situé à droite de la liste que vous souhaitez supprimer.

If the library is allowing you to share private lists with the OpacAllowSharingPrivateLists preference then you will see the “Share” link on your list of lists and the “Share list” link at the top of each individual list. Clicking this will ask you to enter the email address of a patron.

image1298

Une fois l’adresse e-mail saisie, un message de confirmation s’affichera

image976

et un message sera envoyé à cet adhérent.

Panier

Adding titles to the cart

Vous pouvez ajouter des titres au panier à partir des résultats de recherche et/ou de la notice bibliographique. Les options pour ajouter des exemplaires au panier, apparaissent sous chaque résultat et en haut de la page

image977

Clicking the “Add to cart” button will add the one title to your cart. To add multiple titles at once, check the box to the left of each result and then choose “Cart” from the “Add to” pull down at the top of the screen. Once titles are added to the cart you will be presented with a confirmation

image978

A partir des résultats, vous verrez les exemplaires qui sont déjàdans votre panier et vous pourrez supprimer ces exemplaires de votre panier en cliquant sur “Supprimer” (remove).

image1299

Managing the cart

Une fois tous les titres ajoutés dans votre panier, vous pouvez gérer le contenu en cliquant sur le bouton “Panier” situé en haut de l’écran. Votre panier s’ouvre dans une nouvelle fenêtre.

image979

Il y a plusieurs boutons situés dans la partie supérieure du panier.

First is the “More details” button. Clicking this will show you additional information about the titles in your cart (ISBNs, subjects, publisher info, notes and more).

image1300

Next is the option to send the contents of your cart to an email address. This is handy if you want to send the resources you found at the library to your home email account to refer to later or to send to a patron researching a specific topic. Clicking this link will open up a new window that asks for the email address and message to send.

image980

Important

Le contenu du panier peut être envoyé par e-mail uniquement par des utilisateurs connectés. De ce fait, cela évite que la fonction e-mail du panier soit utilisée pour spammer.

In addition to sending your cart you can download the contents of your cart in several pre-defined formats or using a CSV profile that you defined in the tools module.

image981

Enfin, vous pouvez imprimer le contenu de votre panier en cliquant sur le lien “Imprimer”.

In addition to the various different ways to save the contents of your cart, there are ways to add value to the data in your cart. By selecting one or more titles from the cart you can add them to a list (click “Add to a list”), place hold(s) (click “Place hold”), or tag them (click “Tag”). All of these operations follow the same procedure as they do when performing them in the OPAC.

Placing holds

Patrons can place holds on items via the OPAC if they’re logged in and you have the OPACHoldRequests preference set to “Allow”. If the item can be placed on hold the option to place it on hold will appear in several different places.

  • When viewing a list or search results page you’ll see the option to place hold on multiple items by checking the boxes to the left of the results and clicking “Place hold” at the top

    image982

  • Sur une liste ou sur la page de résultats de recherche, le lien “Réserver” se situe en bas des informations du titre

    A single search result in the OPAC, visible is a checkbox on the left, some bibliographic information, the title being a link, availability of items, star ratings, place hold option, place recall option, save to lists option and add to cart option

  • Si vous consultez un titre individuel, vous verrez l’option pour réserver située dans le cadre sur le côté droit de l’écran

    image984

Peu importe à partir de quelles options vous réservez, vous serez amené sur le même écran de réservation.

image985

  • Cochez la case à gauche des documents que vous souhaitez réserver

  • Le titre inclut un lien direct pour la page détaillée de la notice

  • La priorité indique la position de la réservation dans la liste d’attente

  • If allowed by your OPACAllowUserToChooseBranch preference the patron can choose where they’d like to pick up their hold. The list of available pickup locations will include all libraries that have “Pickup location” set to “Yes” on the library configuration page.

  • Si vous souhaitez voir plus d’options, cliquez sur “Afficher plus d’options”

    Place hold form with more options

    • If you have the AllowHoldItemTypeSelection preference set to “Allow” and the record had more than one item type attached you will see an option to choose to limit the hold to a specific item type

      image1301

  • If allowed by your OPACAllowHoldDateInFuture preference, the “Hold starts on date” column will show. This field allows the patron to have their hold start on a future date.

  • By default holds placed in the system remain until canceled, but if the patron fills in a “Hold not needed after” date then the hold has an expiration date.

    • Important

      Expired holds are removed by the expired holds cron job, this is not an automatic process and must be set up by your system administrator

  • If allowed by the OpacHoldNotes preference then patrons can leave notes about their holds for the library by clicking the “Edit notes” button

    Image

  • If the EnableItemGroupHolds system preference is set to “Enable” and the record has item groups, the patron can choose to place a hold on the next available item of a group, rather than the next available item on the whole record or a specific item.

  • Depending on the rules you set regarding item specific holds in your circulation and fines rules the patron will be allowed to choose whether to place the hold on the next available copy and/or a specific copy.

    image987

After clicking the “Place hold” button the patron will be brought to their account page where they’ll see all of the items they have on hold.

Requesting recalls

If your library accepts recalls (see setting up recalls for more information), patrons will be able to place recalls on items.

The option to request a recall appears in various places in the OPAC:

  • In the results list after a search, the “Place recall” option appears at the bottom of each recallable result.

    A single search result in the OPAC, visible is a checkbox on the left, some bibliographic information, the title being a link, availability of items, star ratings, place hold option, place recall option, save to lists option and add to cart option

  • In the detailed record. the “Place recall” option appears on the right side of the screen (or bottom in mobile view) in the options

    List of options: Place hold, Place recall, Print, Request article, Save to your lists, Add to your cart, Suggest for purchase, Save record, More searches

Either of those links will lead to the recall form.

The form to request a recall in the OPAC

  • Pick up location: the patron can choose where they’d like to pick up their recalled item.

  • Recall not needed after: if the patron not need this item after a certain date, they can enter it here. The recall will be automatically expired (with the expire_recalls.pl cronjob) after that date.

  • Recall next available item or Recall a specific item: the patron can choose to recall any item or a specific one. If they choose “Recall a specific item”, they will be asked to select the item in the list.

Once the patron confirms their recall request, they will have get a message saying the the patron who currently has the item will be notified. The request will be added to the recalls tab in their account summary, as well as in their recall history list.

Enhanced content

Taguer (mots-clés)

Depending on your settings for the TagsEnabled, TagsInputOnList and TagsInputOnDetail preferences you may be able to add tags to bibliographic records from the search results and/or bibliographic records. If you are allowing patrons to add tags from the search results screen you will see an input box below each result and a “Tag” option at the top of the screen.

image988

Pour ajouter un tag à un titre, saisissez les tags (mots-clés) (séparés par des virgules) dans la barre de saisie “Nouveau tag”, et cliquez sur “Ajouter”. Un message de confirmation s’affichera.

image989

A partir des résultats, il est possible de taguer des titres par groupe en cochant les cases sur la gauche et en cliquant sur le bouton “Tag”. Une barre de saisie apparaîtra pour que vous ajoutiez des tags à tous les titres que vous avez sélectionnés.

image990

Emojis can also be included using the emoji picker when adding tags

image1341

Commentaires

Patrons can leave comments in the OPAC if you have the OPACComments preference set to allow this. Each bibliographic record has a comments tab below the bibliographic information.

image991

Si l’adhérent est connecté sur l’OPAC, il verra un lien pour ajouter un commentaire sur un document. En cliquant dessus cela ouvrira une fenêtre avec un cadre de saisie.

image992

Une fois le commentaire rédigé, cliquez sur le bouton “Valider”. L’adhérent verra son commentaire en attente, et les autres adhérents verront qu’il n’y a aucun commentaire sur le document.

image993

Once the comment is approved the patron will see the number of comments on the “Comments” tab and their comment labeled amongst the other comments. If the ShowReviewerPhoto system preference is set to “Show”, the patron’s photo pulled from the Libravatar library will be displayed next to their comment.

The 'Comment' tab in the OPAC, show Your comment, the date of the comment, the comment itself, with an 'Edit' link and the patron's avatar

Other patrons will see the comment with the name of the patron who left the comment (unless you have set the ShowReviewer preference to not show patron names).

image995

If you have your OpacShowRecentComments set to show then you’ll see the approved comments on that page.

image996

Depuis cette page, les adhérents peuvent s’abonner aux commentaires récents utilisant le RSS s’ils le souhaitent.

Zotero

Zotero is a Firefox add on that allows for the saving and generating of a bibliography. Learn more about and download Zotero at http://zotero.org.

A partir des résultats à l’OPAC, si Zotero est installé, vous verrez un icône sous forme de dossier dans la barre d’adresse à droite de l’URL. Cliquez sur le dossier afin de remonter la liste des titres de la recherche et de les ajouter à Zotero.

image997

Sélectionnez les titres que voulez ajouter à Zotero et cliquez sur le bouton “OK”. Vous pourrez voir les titres ajoutés dans votre bibliothèque Zotero.

image998

Custom RSS feeds

Using the RSS feeds cron job you can generate an RSS feed for any SQL query (for example a new acquisitions RSS feed). The cron job is run on the command line to produce an RSS XML document.

Le résultat pourra être classé dans un répertoire accessible depuis OPAC (ou l’intranet) afin que les utilisateurs puissent télécharger le flux RSS.

Un exemple d’utilisation peut être trouvé à: misc/cronjobs/rss.pl lastAcquired.conf

Normally the RSS cron job should be run periodically (e.g., daily) to keep the feed up-to-date.

Les listes du fichier de configuration (par exemple lastAcquired.conf) inclut:

  • nom du fichier modèle à utiliser

  • chemin du fichier exporté

  • Requête SQL

The RSS cron job runs the SQL query, then feeds the output of the query through the template to produce the output file.

Important

To use custom RSS feeds you need to turn on the RSS cron job.

OPAC self registration

If you allow it, patrons can register for their own accounts via the OPAC. If you have the PatronSelfRegistration preference set to “Allow” then patrons will see a link to register below the log in box on the right of the main OPAC page.

image999

When the patron clicks the “Register here” link they will be brought to a registration page. The options on the registration page can be controlled by editing the PatronSelfRegistrationBorrowerMandatoryField and the PatronSelfRegistrationBorrowerUnwantedField preferences.

image1000

Once the patron has confirmed submitted their registration they will either be sent an email to confirm their account (if you have the PatronSelfRegistrationVerifyByEmail preference to require this) or presented with their new username and password. If the PatronSelfRegistrationPrefillForm system preference is set to “Show and prefill”, they will be presented with the prefilled login form.

image1001

Les adhérents qui s’inscrivent de cette façon n’auront pas de numéro de carte jusqu’à ce que la bibliothèque leur en assigne un, mais ils auront accès immédiatement à l’OPAC. Pour cette raison, il est conseillé de:

Les adhérents peuvent soit se présenter à la bibliothèque pour une vérification de leur identité avant de recevoir un numéro de carte qui leur permettra d’emprunter des documents; soit la bibliothèque conçoit des numéros de cartes à partir des règles internes, et les fournit aux adhérents auto-inscrits. La bibliothèque peut alors changer la catégorie d’adhérent en une plus appropriée (adulte, résident, non-résident, étudiant etc…) et ajouter un numéro de carte/code à barres.

Your account

If the opacuserlogin system preference is set to “Allow”, patrons can log in and access their account.

Once logged in patrons are brought to their account summary.

If patrons access the home page while logged in, and OPACUserSummary is set to “Show”, they will see a small summary of their account instead of the login fields.

A small box with the number of checkouts, overdues, holds and pending charges has replaced the login fields

From any page on the OPAC, clicking on their name at the top right of the page will bring a patron back to their account.

Réinitialiser votre mot de passe

If you have the OpacResetPassword system preference set to “Allow”, patrons can reset their password by clicking the “Forgot your password?” link found under the login box.

Under the login fields, there is a 'Forgot your password' link

Once clicked, they will be presented with a form asking for their username and their email address.

The password recovery form

Avertissement

Patrons must have an email address on file to reset their password. If they don’t have an email address already in their file, they will get an error message

An error message says No account was found with the provided information. Please contact the library if you need further assistance.

The system will then email the patron instructions for resetting their password.

Confirmation message says You will receive an email shortly. Please click the link in this email to finish the process of resetting your password. This link is valid for 2 days starting now. Return to the main page

The content of the email can be customized with the Notices and slips tool. The code of the letter is PASSWORD_RESET.

Your summary

From the “your summary” tab, patrons will see all of the items they have checked out with the overdue items highlighted in red.

View of the account summary on the OPAC

If OpacRenewalAllowed set to “Allow”, patrons will be able to renew their checkouts from the OPAC.

If the patron has pending charges exceeding the value set in OPACFineNoRenewals, a note will display explaining that renewals cannot be made.

Warning message saying Please note You cannot renew your books online. Reason: Your fines exceed 1.00.

A note will display if the patron cannot place holds due to their charges exceeding the value set in the maxoutstanding system preference.

Warning message saying Please note Your account has outstanding fees & charges of 12.50. Holds are blocked because your fine balance is over the limit.

If AllowPatronToControlAutoRenewal is set to “Allow patrons”, patrons will be able to choose whether or not they want their checkouts to be renewed automatically. If they choose ‘Yes’, items for which automatic renewal is enabled in the circulation rules will renew as expected. If they choose ‘No’, the automatic renewals that would have applied to this patron’s checkouts will not take place.

An option to update auto-renewal preferences

If you have HTML entered in the OPACMySummaryHTML preference then you will see that to the right of the “Fines” column.

If your patrons would like to see the items barcodes on their list of checked out items you can set up a patron attribute with the value of SHOW_BCODE and authorized value of YES_NO.

image1005

Puis, sur le compte de l’adhérent définir la valeur pour SHOW_BCODE sur YES.

image1006

Cela ajoutera une colonne au tableau de résumé de l’OPAC qui affichera les code à barres des documents empruntés.

image1007

If you would like your patrons to leave a note on an item they have checked out allowcheckoutnotes preference must be set to allow.

In the patron’s summary of checkouts, there will be an added column to allow the patron to leave a note (for example: missing first page, or DVD is scratched). This note once confirmed by the patron will appear to the staff at the bottom of the staff interface’s home page, and also when the item is checked in.

image1391

If their guarantee has allowed it via their privacy, or alternatively, if the staff is allowed to change this privacy setting in the staff interface with the AllowStaffToSetCheckoutsVisibilityForGuarantor system preference and this setting is turned on, when the guarantor logs in they will see a tab labeled « Relatives” checkouts » on their summary tab.

The Relatives' checkouts tab in a patron's summary page on the OPAC

Si vous cliquez sur l’onglet “Retards”, cela affichera tous les documents en retard.

The Overdues tab in a patron's summary page on the OPAC

The “Fines” tab will show just a total of what the patron owes. Clicking on the total will take them to the “your fines” tab where they will see a complete breakdown of their fines and bills. If you don’t charge fines at your library you can turn the display of these tabs off by setting the OPACFinesTab preference to “Don’t allow.”

The Charges tab in a patron's summary page on the OPAC

If their guarantee has allowed it via their privacy, or alternatively, if the staff is allowed to change this privacy setting in the staff interface with the AllowStaffToSetFinesVisibilityForGuarantor system preference and this setting is turned on, when the guarantor logs in they will see a tab labeled « Relatives” charges » on their summary tab.

The Relatives' charges tab in a patron's summary page on the OPAC

The “Holds” tab shows the patron the status of all of the items they have on hold.

The Holds tab in a patron's summary page on the OPAC

Patrons can cancel or suspend (depending on the value of your SuspendHoldsOpac system preference) their own holds if they are not in transit or already waiting for them. When they click “Suspend” they will be presented with the option to choose a date for their hold to resume.

Suspend hold pop up modal asking until which date to suspend the hold (clear date to suspend indefinitely) and to confirm the suspension

Ils peuvent également suspendre toutes leurs réservations pour une période non définie ou jusqu’à une date précise, s’ils remplissent les options de suspension situées en bas de la page.

Note

If you have your AutoResumeSuspendedHolds preference set to « Don’t allow » then you will not have the option to put an end date on the hold suspension

If your library allows recalls, the patron can see the recalls they have requested and their various statuses in the “Recalls” tab.

The Recalls tab in a patron's summary page on the OPAC

The patron can cancel a recall by clicking the “Cancel” button, provided that it is not already awaiting pickup.

Patron flags

Si vous avez activé un piège sur le compte adhérent, ils pourront voir l’un des messages d’erreur suivant en haut de page de leur compte.

  • Carte perdue

    image1011

  • Changement d’adresse de l’adhérent

    image1012

    • Note

      this error message will not include a link to the update form if you have OPACPatronDetails set to “Don’t allow”

  • Adhérent suspendu

    image1013

Your fines

If your library charges fines the next tab on the left is “your fines”. Opening this tab will show the patron an entire history of their accounting at the library.

image1014

If you are allowing patrons to pay their fines using PayPal with the EnablePayPalOpacPayments preference there will be checkboxes to the left of each fine with an outstanding amount.

image1306

Au bas de l’écran, l’usager pourra voir l’option de payer avec PayPal pour les amendes qu’il aura sélectionnées.

image1015

After paying they will be presented with a confirmation

image1307

And you will see that the fine was paid using PayPal on the staff side.

image1308

Your personal details

If you have your OPACPatronDetails preference set to “Allow”, your patrons will see a form filled in with their contacting information by clicking on the “Your personal details” tab. You can control what fields patrons see and can modify via the OPAC by setting the PatronSelfModificationBorrowerUnwantedField and PatronSelfModificationMandatoryField preferences.

Personal details tab

Patrons can edit their details in this form and click “Submit changes” to have their edits sent to the library for review before their record is updated. Staff will see all patrons requesting modification to their record listed below the modules on the main dashboard along with anything else awaiting library attention.

Prompt on staff interface homepage to view patrons requesting modifications

If the OPACPatronDetails preference is set to “Don’t allow” then patrons will simply see their details and a message stating that they should contact the library for changes.

Your tags

If your library has TagsEnabled set to “Allowed” then the next tab on the left will be “your tags”. This tab will show patrons all of the tags in the system as a cloud and then all of the tags they have applied in a list format. From here patrons have the ability to remove tags that they have added if they want.

image1019

Change your password

Next, if you have OpacPasswordChange set to “Allow” the next tab will be “change your password,” where patrons can change their password for logging into the OPAC. Patrons will be presented with a standard form asking them to enter their old password and then their new password twice.

image1020

Your search history

If you have your EnableOpacSearchHistory preference set to “Allow” then your patrons can access their search history via the “your search history” tab.

image1021

L’historique de recherche affiche tous les termes recherchés par l’adhérent. Si vous cliquez sur l’un des termes, vous relancerez une recherche sur ce terme. L’historique de recherche peut être supprimé par l’adhérent en cliquant sur le lien “Supprimer votre historique de recherche” situé en haut de l’historique ou en cliquant sur la petite “x” rouge située à côté du lien “Historique de recherche” en haut à droite de l’écran.

image1022

Your checkout history

Depending on your library’s setting for opacreadinghistory your patrons may see the “your checkout history” tab next. This will show the patron their entire borrowing history unless they have asked the library to not keep that information via the “your privacy” tab which will appear if you have the OPACPrivacy preference set to “Allow.”

View of the patron's checkout history on the OPAC

Your privacy

The “your privacy” tab will appear if you have both the opacreadinghistory and the OPACPrivacy preferences set to “Allow.” This tab will allow the patrons to decide how the library keeps their circulation history data.

image1024

L’adhérent a le choix parmi ces trois options:

  • Pour toujours : Garde pour toujours ma liste de lecture.

  • Défaut : Conserve mon historique de lecture conformément aux lois en vigueur. C’est l’option par défaut. La bibliothèque se chargera de conserver votre historique de lecture pour la durée autorisée par la loi.

  • Jamais : Efface immédiatement mon historique de lecture. Cela effacera de votre historique tous vos documents empruntés au moment où vous les rendez.

Depending on the patron’s suggestions the contents of the “Your reading history” tab and the “Circulation History” tab in the staff client may change.

Quelque soit le choix de l’adhérent, celui-ci peut supprimer à tout moment son historique de lecture en cliquant sur le bouton “Suppression immédiate”.

image1025

Cliquer sur ce bouton ne supprimera pas les prêts en cours mais effacera l’historique de lecture antérieur de l’adhérent.

Important

In order for the patron to be able to delete their reading history you must have the AnonymousPatron preference set.

If you’re allowing guarantees to grand permission to their guarantors to view their current checkouts with the AllowPatronToSetCheckoutsVisibilityForGuarantor preference they will see that option on this screen.

image1309

When the guarantor logs in they will see a tab labeled « Relatives” checkouts » on their summary tab.

The Relatives' checkouts tab in a patron's summary page on the OPAC

Your holds history

If the OPACHoldsHistory system preference is set to “Allow”, patrons will be able to see all their current and past holds.

Screenshot of the holds history table in the patron's account on the OPAC.

Your purchase suggestions

If your library allows patrons to make purchase suggestions the next tab will show all suggestions that the patron made to the library and their statuses. To disable this tab and the suggestion functionality set the suggestion preference to “Don’t allow.”

image1026

If you have OPACViewOthersSuggestions set to “Show” then patrons will be able to search suggestions from the top of this list.

Your messaging

If your library has the EnhancedMessagingPreferences and the EnhancedMessagingPreferencesOPAC preferences set to “Allow” then your patrons will be able to choose which messages they receive from the library (with the exception of overdue notices which the library controls).

image1027

If you use an outside driver for sending text messages set with the SMSSendDriver preference, you will see an additional column to receive these messages as SMS (or text messages) and a field for a cell (or SMS) number.

image1028

If you are using the Email protocol for sending text messages set with the SMSSendDriver preference, you will see an additional column to receive these messages as SMS (or text messages), a field for a cell (or SMS) number, and a pull down listing cellular providers entered in administration.

image1029

If you are using the Itiva Talking Tech service you will see an additional column to receive these messages via Phone.

image1311

  • Ces notifications sont:

    • Advanced notice: A notice in advance of the patron’s items being due (The patron can choose the number of days in advance)

    • Item checkout: A notice that lists all the of the items the patron has just checked out and/or renewed, this is an electronic form of the checkout receipt

    • Hold filled: A notice when you have confirmed the hold is waiting for the patron

    • Item due: A notice on the day and item is due back at the library

    • Item check-in: A notice that lists all the of the items the patron has just checked in

Les adhérents peuvent choisir de recevoir leurs notifications en un seul résumé en cochant les cases dans “Résumé seulement?”. Ils recevront en un seul email tous les types de messages vus ci-dessus au lieu de plusieurs emails pour chaque alerte.

If the TranslateNotices preference is set to Allow the patron will also see an option to choose “Preferred language for notices” with a dropdown list of available languages.

Important

You must choose a delivery method (SMS or email or phone) along with “Digest only?” if you would like to receive a digest of the messages.

Your lists

If your library has the virtualshelves set to “Allow” they will see the “your lists” tab. From here your patrons can review public lists and create or edit their own private lists.

image1030

Ask for a discharge

If you have enabled the useDischarge preference then patrons will be able to request a discharge via the OPAC.

image1312

À partir de cet onglet, les adhérents peuvent demander un reçu

image1031

Et vont recevoir une confirmation de leur demande.

image1032

Your routing lists

If you are named as a recipient on any serial routing lists you will see them listed here. The following note is displayed « You are subscribed to the routing lists for following serial titles. If you wish to make changes, please contact the library ».

Your interlibrary loan requests

If your library has the ILLModule preference set to ‘Enable’ patrons will have the option to make ILL requests when logged in to their OPAC account. From here they can view their existing requests and place new ones.

image1373

To place a new interlibrary loan request click on ‘Create a new request’ and choose a request form.

image1374

Note

The options displayed are dependent on your ILL configuration. See the ILL backends wiki page at https://wiki.koha-community.org/wiki/ILL_backends further explanation.

Note

If you have entered copyright text in the ILLModuleCopyrightClearance preference the text displays here and you need to click ‘Yes’ to accept before continuing.

Complete the publication details as fully as possible. Depending on the form in use you may see the option to add Custom fields for additional information such as notes. Destination branch is a required field, this is the branch you would like the request to be sent to.

image1375

Click on “Create” to submit your request to the library for processing.

Your submitted request will be listed with a status of ‘New request’. Once processed the status will be updated to ‘Requested’.

Click on ‘View’ to make changes or cancel your request.

You cannot edit the form details but you can add a note to request a modification and then click on ‘Submit modifications’ at the bottom of the screen. Your modification will be sent to the library for processing.

For new requests you will also have the option to ‘Request cancellation’. Your request will be updated with the status ‘Cancellation requested’ and can then be removed by library staff.

Your recalls history

If your library allows recalls, the patron can see all their past and current recalls they have requested and their various statuses in the “your recalls history” tab.

The Recalls history page in a patron's account in the OPAC

The patron can cancel a recall by clicking the “Cancel” button, provided that it is not already awaiting pickup.

Curbside pickups

If your library offers curbside pickup, the patron will be able to see their scheduled pickups under “Curbside pickups”.

The 'Curbside pickups' tab in the patron's account in the OPAC, shows a 'Your pickups' tab, with one scheduled pickup with the library, the date and time, notes and action buttons (Alert staff of your arrival and Cancel this pickup)

The patron has the option to indicate that they are outside the library by clicking “Alert staff of your arrival”.

The patron also has the option to cancel their scheduled pickup with the “Cancel this pickup” button.

If the “Patron-scheduled pickup” setting is turned on in the curbside pickup configuration, the patron will be able to schedule their own curbside pickup appointment.

The 'Curbside pickups' tab in the patron's account in the OPAC, shows a 'Schedule a pickup' tab, with a drop-down to choose the library

  • The patron must first choose a library at which they want to pick up their items

    Note

    Only libraries with curbside pickup enabled will be displayed in the drop-down menu.

    Furthermore, if the “Enable for waiting holds only” setting is turned on, only the libraries at which the patron has waiting holds will be enabled.

  • The patron must then choose a date

    Note

    Only dates with available time slots will be displayed.

  • The possible pickup times will be displayed, depending on the day of the week

    The 'Curbside pickups' tab in the patron's account in the OPAC, shows a 'Schedule a pickup' tab, a library is chosen in the library drop-down, a date is selected in the date field, all the time slots for that day are displayed and one is chosen in green, one is greyed out

    Note

    The number in parentheses under each time slot is the number of available appointments for that time. If the maximum number of appointments has been reached, based on the “Maximum patrons per interval” setting in the curbside pickup configuration, the time slot will be greyed out and the patron will not be able to select it.

  • The patron can optionally add a note about their pickup

  • The patron must then click “Schedule pickup” to save their appointment

Purchase suggestions

If your library has the suggestion preference set to “Allow”, patrons will have the option to make purchase suggestions in several areas in the OPAC.

If you are allowing everyone to see the purchase suggestions made by others with the OPACViewOthersSuggestions preference, there will be a link at the top of your OPAC under the search box.

A link labeled 'Purchase suggestions' appears under the search bar on the main page of the OPAC

Un lien s’affichera pour suggérer un achat si l’adhérent ne trouve rien pour sa recherche.

A message reading 'Not finding what you're looking for? Make a purchase suggestion', there is a link under the words 'purchase suggestion'

There will be a “Suggest for purchase” option in the detailed view of a bibliographic record.

List of options: Place hold, Place recall, Print, Request article, Save to your lists, Add to your cart, Suggest for purchase, Save record, More searches

And there will be a link in the Your purchase suggestions tab in the patron’s account.

There is a link 'New purchase suggestion' under the title of the page

Cliquez sur l’un de ces liens pour ouvrir le formulaire de la suggestion d’achat.

New purchase suggestion form

Once the form is submitted the purchase suggestion will appear in the acquisitions module for the librarians to manage.

If a purchase suggestion has been ordered through the acquisitions module, the patron’s purchase suggestion title will be clickable and bring the patron directly to the ordered record in the OPAC.

Libraries

The “Libraries” page shows the contact information (address lines, city, state, zip/postal code, country, phone number, fax number, website) for libraries in the system that are set as “Public”.

Libraries page in the opac

The library name is a link to a specific page for this library. This second page also includes “OpacLibraryInfo” HTML customizations for this library.

Library-specific page for a Test library, showing the address lines, city, state, zip/postal code, country, phone, fax, website, and OpacLibraryInfo HTML customization